Fax: HP Officejet 8600 more (all in one wireless printer) operating system: windows 7 64-bit router/DSL Modem

It's my second printer of HP wireless. the main problem and the only problem is that whenever my phone rings responses of fax, which is very annoying, on hearing the tone while trying to answer the phone.  I followed the instructions exactly.  Have configured fax to answer on the 6th ring... auto answer set OFF... and yet he answers at all times when the phone rings.  I tried to turn off the printer and it happens again... even when the PC and the printer are out of service happens.

I'm on a DSL line with phone... have voicemail... have a home network...

Hello

Given that you have tried to put off the printer and it still happens, I can hardly believe it's the printer the fax must be turned off, as all the other features of the device.

Please try to disconnect the telephone line from the port fax 1LINE and try the composition for your phone line... You will hear a fax tone?

If so, I'm afraid, he's probably not coming from the equipment to HP...

If you can see any change, reconnect the printer... Make sure that you connect the cable in 1LINE and not in any other port by mistake...

Also, make sure that you connect the cable from the phone using an ADSL micro filter... Make sure that the printer connected to port telephone filter and not in the ADSL port by mistake.

Please let me know of any changes,

Shlomi

Tags: HP Printers

Similar Questions

  • My HP LaserJet 3055 All In One does not scan with Windows 7-64 bit.

    My HP LaserJet 3055 All In One does not scan with Windows 7-64 bit. I can copy and print only. Thank you.

    Hello

    Is the printer connected to your PC by USB or network?

    Using the USB connection, you can scan using Windows Fax and Scan software built into your operating system.

    Scanning over a network connection unfortunately supported on Windows7 32 bit only, as you can find listed in the section about network scanning below:

    http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?&objectID=c02539136#A2

    Kind regards

    Shlomi

  • HP Officejet 8600 pro all-in-one N911g

    I have an XP laptop to update, and it prints well at the top of the device.

    I also have a XP PC up-to-date.    Using a new network printer CAT-5 connection to my century link DSL modem/router kills my wireless connection.  Unplug the Cat-5 unit of the printer and wireless connection returns.

    How can I print without problem on both computers to one Officejet 8600?  I'm the only user, so I won't be tring to print at the same time each computer?

    Abbotsbury

    Hello

    As Jabzi said, this product direct support wireless and it will work even when the network cable is connected to the unit.

    So, maybe it's the way you want to continue if you need to have 2 different networks for your home network configuration.

  • HP Officejet 4630 e-all-in-one: incorrect printer in Goggle Cloud printer

    I entered the wrong email address for my printer Hp Officejet 4630 e-all-in-one printer Google Cloud Print & now the premium printer Hp Officejet 6700 is showing that & option. I fixed the email address to hpconnected.com with the appropriate claim code (4598edne25uvy), I changed the email to [personal information deleted]
    , so I could remember it more easy, but the printer option still shows Hp Officejet 6700 premium in the Gmail app. How can I fix it?

    Hello @db53,

    Welcome to the forums of HP.

    I understand that you have the wrong printer on your Google Cloud Print account.

    I would like to help.

    If you goto Google.com/cloudprint, then select printers in the left column, you can choose to delete the printer.

    That it will take off your Google Cloud Print account.

    You may also select the option "Add printer ready cloud" again.

    This time, when you add the printer, use the address custom connected HP ePrint.

    I'm not sure about the Gmail app, which may have to be processed by the Publisher app.

    With luck it will be fixed when you remove the 6700 account.

  • OfficeJet 5740 e-all-in-one: the printer display shows 'downloading' message despite no web service implemented

    I got a new Officejet 5740 e-all-in-one and put in place a few days ago. It is implemented in a router which is also a modem.  I've implemented any web service.  My network is password protected, and I'm the only one on this subject.

    A couple of times I arrived in front of the printer and there was a screen that says that there is a current download, and he showed the percent completed. This surprised me because I have not implemented in web services for the printer.

    I cancelled the download, both times.  The second time I accidentally typed the screen again.  I don't know what button I hit, but it has printed a message that says that my printer is now web enabled.  He also says that my printer has an email address.

    I went into the web installer, and it seemed to me that I had not implemented the web.

    1. what could it possibly download?

    2. If it does not complete a download while I'm not looking for, will there be a record of this?

    Hi @Andrew111,

    Thanks for joining the Forums of HP Support for a solution to your printer problem.

    I understand that you use a 5740 Officejet from HP printer e-all-in-one with a computer of Windows 7 and you noticed that the screen of the printer said there was a current download, which you surprised because you but you did not set up web services. I would like to help with that.

    You mentioned that the printer has its own e-mail address. Web services have been enabled for the printer to have an address of mail @hpeprint.com. It is possible to disable the ePrint and printable HP once the HP Web Services has been enabled.

    The download that was underway was probably a printer update, which will come by automatically. Nothing to do with the computer. I don't think there is a record of updates of the printer anywhere.

    Please let me know if that answers your question...

  • How to print envelopes and labels on an Office Jet Pro 8600 more all-in-one

    Envelopes and labels can be printed using the paper on top of the Office Jet Pro 8600 more printer all-in-one?

    If printing envelopes the lower tray, should I remove the paper from the tray and adjust the margns?

    cor21911,

    You are not able to print labels or envelopes of the ADF, for copying or scanning only. Also, it is not necessary to remove the regular printer paper to print on these types of media, even if it can make it a little easier. All you have to do is go to word or any other type of program allows you to print and select the appropriate model label or envelope and follow the instructions.

    Let me know if you need additional assistance.

  • All-in-one Officejet 5610: lost all ability to scan after operating system upgrade

    Hello

    First post.

    Tried to implement everything. Need for new perspective or someone just told me that the printer/scanner is not taken in charge any longer.

    Recently updated to OS 10.8.5 as well as extra memory.

    Have scanner only for the work of the company.

    The scanner just stopped working after update of HP software. I don't remember version. Nevertheless, today I removed all HD and started around, but nothing works.

    Start over means, I downloaded a new driver and the patch.

    Using a HP scanning Application. Now that the application does not appear even on the computer.

    Let's start with some basic questions and then go from there:

    Neither HP or HP scanning Application utility are now on the hard disk after you follow the instructions from HP to delete.

    What I need the original disks and to reinstall the software from it or can those be online?

    Thank you.

    Mike

    Follow-up.

    Tried this approach (see link), but the all-in-one Officejet 5610 is not listed. I suspect the printer/scanner in is no longer supported?

    THX!

    http://www.MethodShop.com/2013/12/HP-utility-install.shtml

    Second follow-up:

    I understand how to use of Apple's Image Capture application as a workaround. Not as friendly as HP Scan.

    Unless someone can tell me the HP and HP Scan utility always work in OS 10.8.5 for the 5100, I guess that will be sufficient.

    Thank you.

    Hello

    For Mountain Lion, your printer software is provided via Apple Software Update.

    Follow the steps below under "Use Apple Image Capture" to scan with the Officejet 5610 on your operating system:

    http://support.HP.com/us-en/product/HP-OfficeJet-5600-all-in-one-printer-series/441142/model/441144/document/c04788799/

    If you are having problems scanning, be sure to follow these documents to install the latest drivers from Apple Software Update:

    http://support.HP.com/us-en/product/HP-OfficeJet-5600-all-in-one-printer-series/441142/model/441144/document/c04510394/

  • How is my scanner HP Officejet Pro 8500 all-in-one will not work on Windows 8?

    I just upgraded to Windows 8. My HP Officejet Pro 8500 A910 all-in-One printer works fine, but the scanner won't. I get an error message that says: cannot find the scanner. What can I do to correct this situation? HP has a driver that works with Windows 8?

    Did you uninstall this printer before the upgrade to Windows 8?

    If not, then I uninstall the software for the 8500 A910 and reinstall with the drivers up to date.

    The link here for the driver for the 8500 A910 page has e-all-in-one

    You can also get drivers for HP printers in Windows 8 by using the HP printer installation wizard.

  • HP Deskjet 6310 all in one: Deskjet HP 6310 all in one wireless printing functions

    I have a HP Deskjet 6310 printer all-in-one and want to know if this printer has wireless capability (i.e., can this printer receive orders for wireless printing)?   (Note, I have a new MacBook Air wireless with send feature).

    @NickC3

    Your printer:

    All-in-one printer, HP Officejet 6310 range

    The printer specifications indicate the printer works with 2 USB, a wired Ethernet connection and - with an adapter - with Bluetooth to be printed.

    Thibault system requirements:

    • USB 2.0 full speed, front and back ports
  • All-in-one wireless printer Photosmart 109 n install problems with Windows 8.1

    Hello

    I have a Photosmart Wireless all-in-One 109 n printer. I recently bought a new laptop with windows 8. When I put in place it automaticalyl found the printer and installed it. I can use only through remote HP AiO. I can't use the scanner there is no application or a program that works. I tried to install the full feature software and managed to go that far to extract the files but once concludes nothing happens. I uninstalled the printer and then re-installed. nothing happens. I'm not a computer wizzard so I need help please!

    bionicpatti,

    I really appreciate the up-to-date information and thank you for your patience. I wish that you continue with the following steps:

    First step: clear temp directory

    1. Type %temp% term or search programs and files of field
    2. Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
    3. Proceed to step 2 below

    Second step: downloaded and extracted to your system:

    1 download the drivers and full software features

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-109707-1&cc=us&DLC=en&LC=en&OS=4158&product=3794625&sw_lang=

    2. once the download is complete, double-click the file to extract the software.

    3. when the installation window opens, press the Cancel button to stop the installation

    4. tap folder in the race or search programs and files of field

    5. Locate and open the folder starting with 7z (example: 7zS2356)

    6. right click on the folder and select copy

    7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

    8 open the 7z, that you just copied on your desktop

    9 open the Util folder

    10 open the CCC folder

    11 start the uninstall_L4

    12. once the uninstall is complete, restart the computer

    13. run disk cleanup from the tools Accessories\ system under all programs folder

    14. download and install the latest version of Adobe flash player

    http://www.Adobe.com/support/flashplayer/downloads.html

    15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

    Please let me know the results!

    Thank you once again,

  • HP all-in-one wireless with 10 5525 windows insider

    Hello world

    I work with the 5525 printer about 3 years.

    also with wifi wireless, andalso with windows 10.

    all of this until last May.

    in may, I was to format and install windows 10 insider and fromthis point, thast all I tried to solve the problem, it's not helping me. and the problem is:

    that, since may, I can't work with this printer, wireless, with wifi.

    I can to work very well with a usb cable, but not with the wireless.

    Windows don't simply do not see and not detected my impression when I try to work wireless.

    is not see the printer. not even in offline mode.

    in the list of wifi, I can see the HP-printing-da-Office-5525, but in the unit and the printer - no.

    I also tried to install all the latest drivers from hp and for windows 10 - without resluts.

    also, I tried to install the latest windows build - 14390, but this does not help me.

    I think its something with the drivers.

    can someone help me?

    Thank you very much!

    Well, first thing to do is to disable wireless live, because you don't need and it's confusing questions. To disable this feature:

    1. On the printer, click on the wireless icon that looks like a radio tower.
    2. Click settings.
    3. Click on wireless Direct.
    4. Click turn OFF.

    Now, to connect the printer to your wireless network:

    1. From the main screen, click on the wireless icon.
    2. Click settings.
    3. Click Wireless Setup Wizard.

    Please let me know the results after following the above. If you are able to connect to the wireless printer, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  • OFFICEJET PRO HP8600 MORE: HP8600 all-in-One Wireless scan w 10 Windows - Scanner not recognized

    Operate computer w Windows 7 for printing and scanning.  Can get ony impression at work Windows 10 rounds.  Ititially scanning worked, but it won't now.  Someone knows how to get this working?

    Here's what I had to do:

    In my wifi settings, I changed the "allow your PC to be detectable by other PCs and devices on this network" off.  This change is Windows 10 think I was on a public rather than private network.  (Community of Windows)

    Second, I had to go to BitDefender under maps of firewall and configure an Exception for my wi - fi card when the type of network is home/office to the IP address of my printer. (BitDefender support)

    This explains why it worked... when I tried after adding my new computer on the network.  Then I started looking through settings (dangerous thing) and changed the setting of WI - FI for 'maximum security' in my mind.  Then I bought BitDefender...

    Thanks for you time helping me get to the true solution.

  • HP Officejet Pro 8600 more: password protect my wireless printer

    I want to put a password on my 8600 Pro Plus.  I looked in the guide and went to the printers IP address and the password.

    It shows not protected.

    If wireless SSID of your router and change the password.

  • HP Officejet 4500 all-in-One wireless printer

    The OP is win7 64-bit.  Control Panel to say 'NOT INSTALLED driver FOR THE HP3CC282 (HP OFFICEJET 4500 G510n-z). However, the properties of the printer show that this version of the 6.1.7601.17514 driver is installed. Why he says miss me the driver when properties shows me it's there?

    OK, go ahead and uninstall the software from the Control Panel, and then install the full feature software.

    Once you have installed the software, let me know when the printer is connected and you can print.

  • OfficeJet 6600 e-all-in-one: Wireless connectivity with the new router problem

    We had the printer since 12 months, workin with no problems.

    Just got a new modem/router (NETGEAR V7610) installed as part of the NBN implementation and I can't get the printer to connect to the new router. 5 and 2.4 G active networks. The two defined newtorks on security WPA2-PSK [AES].

    The printer detects the wireless (2. 4 g) network, but can't coplete the connection. Tried the two direct input the network key and using WMA.

    -The display panel shows "wireless invalid password (WPA) is entered.

    -The results of network printer test page indicates a FAILURE on safety.

    I was able to connect to multiple other devices (laptop, iphone, Kindle...) without any problem. Used the two direct entry of the key network and WMA.

    Anything else I can try?

    Find a new update of the firmware for the printer (May 9, 2016).

    After you apply the update, the printer is able to connect to the new modem.

Maybe you are looking for

  • iMovie - how to input gps code in background with globe?

    I got code google maps GPS and wanted to use it for the context of imovie feature - road of showing globe from one city to another. but apparently the code is not what I need to put?

  • I can't get the platform installed 971644 update

    I tried to download Live Essentials but keep says I need to install the platform update 971644.  I installed this update several times through Windows updates, so can't understand why I get this message.  I tried to install separate components, IE; 0

  • File ignored hosts, windows 7 64-bit, firefox

    I edited my hosts file successfully in c:\windows\system32\drivers\etc\hosts using a notebook running as an administrator; I have traced various in the format "127.0.0.1 msn.com", "127.0.0.1 www.msn.com", etc. (a single space).  I rebooted and checke

  • Capture of IOException errors

    Hello. I'm a newbie, so don't know if I'm still on the right track. Have a screen that updates storage persistent (v 5.0 SDK). The code that I have seen used a save() so code method he ran was: public void save() throws IOException {}persistentHashta

  • No tab share!

    I have Windows 7 starter and I tried to do an ICS with my laptop & Xbox360 but their tab shares and I can't connect ether bridge. Someone please HELP me WITH THIS PROBLEM. Thank you