Fax test failed. No dial tone detected. Printer is connected directly to the telephone line.

Similar Questions

• Whenever I try to send a fax, I get error "no dial tone was detected. The telephone line is busy or not connected to the computer. »

  Whenever I try to send a fax, I get: "no dial tone was detected. The telephone line is busy or not connected to the computer. "Any ideas?

  You can't send a FAX via a connection to broadband. Fax is essentially specialized phones and requires that a service composition is used at BOTH ends.

  You can buy an analogue Fax/modem (USB types work well enough) or use a service to convert fax email...

• M476nw: Color LaserJet MFP M476nw Fax Test failed

  I bought a new LaserJet M476nw, but my fax test fails each time through the configuration laserjet and HP utility software.  The Laserjet Printer is connected on a network and using Vista.

  I have a dedicated fax line that is connected into the socket on the icon with the socket at the rear of the laserjet printer.   I can hear the tone on the fax line when it is connected to a phone.   I called the fax line and it's normally rings and no response.   I also tried to connect a phone to the phone laserjet icon, while the fax line is connected to the laserJet printer, I hear the tone of the phone.

  I don't know what I have to do to get the fax test to pass, so I can start fax on this machine.  Any suggestion is appreciated.

  Mike

  In fact, this problem is now solved.

  It's a whole new machine, so since I didn't really have all the data I did a restore to return by default.  It restarts and now he spends.

• Fax HP Photosmart C410 connects to the telephone line at home instead of the dedicated fax number

  I have a Photosmart C410a.  The machine must be connected to the dedicated fax line, and number of this line was introduced in the fax header.  However, when tested using the FaxBack Service, fax back called the conduct of the House instead of connected to the fax line.  The machine is connected directly to the wall and there is no dispatcher, etc., with the home phone.  The telephone number doesn't have to all be typed them into the C410a.  Any thoughts you may have on what might be happening would be greatly appreciated.

  Best,

  Scott

  RESOLVED: The problem has been an error with the FaxBack service - my camera was working normally.  The best way to test your machine is either send/receive a fax with a friend or with HP customer support.

• I use Windows 7 on a computer to which a printer is connected directly by a USB cable. I am able to print, but cannot find the printer when I run control/devices and printers Control Panel

  I use Windows 7 on a computer to which a printer is connected directly by a USB cable.  I am able to print, but cannot find the printer when I run control/devices and printers Control Panel. In fact, no devices appear at all.

  Can someone help me with this?

  Thank you.

  See http://www.winhelponline.com/blog/fix-devices-and-printers-completely-empty-windows-7/

  If this does not help, there is a very long thread here, which may include other suggestions--> http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/devices-and-printers-dialog-box-empty/353707a4-bcb0-4334-98bc-aab84747fecd?page=1

• C1765 done yellow toner a printer roller noise rattling and the printer does not work

  Hear a clicking noise when printing.  Replaced the yellow toner and the rattling is still strong and the printer will not work.  The noise and the vibration felt on the new toner only occurs with the yellow toner.  What is happening, is the printer goes wrong.  "low density, yellow to replace the cartridge, printer restart" I just put in a new cartridge.

  Hello David,.

  Please post on the forum. According to the information you provided, it looks like you have a mechanical failure within the printer itself. This device is more compact and carriers Dell limited parts, the best option at this stage would be to replace the printer. It is the course of action we would take if the product is under warranty.

  Kind regards
  Joseph E

  #iworkfordell

• Belarc Test - test failed due to not having a wired connection

  I was offered a job online, work at home, but one of the requirements is to make a Test of Belarc on my computer.  They keep saying that I must have a wired connection, showing an IP 192 or 10.

  "A wired connection to the router is necessary.  "Wireless is not taken in charge for security reasons.  You must be connected via a router showing an IP address 192 or 10."

  my system is using premium windows 7 on a dell desktop computer. My modem is a sb6121 of the surfboard and my router is an asus rt - 53

  So how I hard my modem wired to my computer?

  

  

  Above show test it I failed, I tried to make the wired connection on the two tests but failed.

  Frederik Hello, thanks for the help, I did exactly that. I introduced my new test to see if I have success or failure but in the meantime I also copied my test results down below, did hard successfully I wire my internet connection?

  I think you did, but it is very easy for you to find out for yourself:

  1. Open a web page, for example google.com.
  2. Disconnect the CAT5 cable by pulling the RJ45 plug of router.
  3. Refresh the web page with F5. It breaks down.

• print with excel it breaks the grid lines

  Since getting my HP Envy 4500 printer, I have problems printing from Excel spreadsheets.   The "Print Preview" shows the document correctly, but when it prints it jumps a few rows of the grid.   My ink cartridges are filled and I marked settings to print the grid (which is correct because it prints some) lines.    What is going on?  Any help would be greatly appreciated.   Also, I tried to cut and copy into a new doc, but it still prints the same way.   Also made a new worksheet test and print it likewise - lack of grid lines.

  I saved the excel form XPS docs and now print all lines of the grid.    I don't know why, but it worked for me.

• Cannot control printer HP 6510 directly from the computer

  I use the HP - 6510 B222a printer and used to be able to control all functions directly from the computer.  All options would appear in a window allowing me to select an assignment (printing, scanning, etc.).  All of a sudden, this option disappeared and now I can only control functions of the printer from the small screen on the printer itself.  Can someone help me with this problem?  I wish I could go back to control everything directly from the computer.  In addition, there is no way to determine the levels of ink on the computer screen.  Thanks for your help.

  Hello

  Reinstall the full feature software and driver on your computer can help. You can download from the following link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?CC=au&LC=en&DLC=en&product=5058336

  (Note: B222a and B221a use the same driver).

  Kind regards.

• Print file .rep directly on the printer, configure the application server

  Hello

  I spent several hours on this forum and unfortunately not found a solution yet so hoping someone has an idea that can help me solve this problem.

  Using forms/States of oracle 11g with a linux application server, we develop on windows machines. Printing reports using compiled .rep files.

  We have a network printer sharing (HP) that is configured on the application server, and we can print on the correct printer directly on the application server.

  Problem is when I try to print a report when executing the forms of oracle on my machine of development directly to the printer.

  I tried:

  SET_REPORT_OBJECT_PROPERTY (l_repid, report_destype, printer);

  SET_REPORT_OBJECT_PROPERTY (l_repid, report_desname, 'APPSERVER_PRINTER_NAME');

  When I put the report_desformat in 'pdf' format I can see the reports to enter the print queue, but they do not reach a 'State' order ' print file empty. "

  When I remove report_desformat, he sends in eps and as I understand it, it prints, but with bad formatting (I work remotely and run by what their colleagues say.)

  CUPS 1.4.2 reference printer queue tab.
  

  The report generates in the browser if I change the destype to produce and use web_show_document to display it as we usually do.
  

  
  

  I understand there are solutions using a java bean or involving the installation of the software on the client computer, but my employer is unwilling to go to that direction. We have only a handful of reports that require the ability to print directly to the printer.

  
  

  That someone has an idea of what the problem might be or help provide additional steps, I can take to solve problems? I have no idea how to do to configure printers, our IT Department managed this and they say, it's good so I don't know if there is a problem with what I'm doing or there was something installation related rate with this network printer.

  
  

  Thanks in advanced for any assistance!

  I have given up trying to use a report_desformat of pdf and paste it with the default value of the eps, after review, it seems pretty close match that generates pdf format and despite the fact that the queue on the application server throws a misprint even with the eps format it actually always draws for the good enough for now. Would be nice to know what happened here, but the problem has been resolved.

• HP Officejet 7310 all-in-One: printer does not print when connect you to the router

  I can't print from a Mac book pro wireless connected to dsl ATT modem/router.  My printer, HP Officejet 7310 is connected to the router with an ethernet cable.  I can print a test page from the laptop and see my supply rate.  When I try to print an e-mail or my word processing, I get my printer icon on the desktop that said it printer, no error message, but printing does nothing.

  I use the latest driver from apple, 2.0.4 and I have installed and uninstalled the printer numerous times and I

  Download the software twice.

  The HP network configuration page shows the same IP address of the printer, as does the router.

  The printer works fine if connected to the laptop.  If I connect the printer to my mac mini, which is also connected to the

  router by an ethernet cable, I can print from the laptop.  What is going on?

  Hi @TimL2,

  Welcome to the HP Forums!

  I noticed that you can not print with your HP Officejet 7310 when connected to your router. I'm happy to help with this problem!

  Please, try the procedure described in this guide, "printer offline" or "printer not responding" Message (OS X)and let me know what happens!

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  I hope this guide is useful!

• connect the telephone line only to send a fax

  I just got my HP8600 and want to know if I can connect my phone line only when I want to send a fax?  I've never had the opportunity to receive a fax and so would deal with the connection of the phone only when I need to send a.

  Hello

  Yes, you can do it this way, if you wish. Please use the following manual to implement in your country:

  http://h10032.www1.HP.com/CTG/manual/c03045013.PDF

  Kind regards.

• HP 6980 printer - cannot connect wireless with the new modem/router

  
  

  You're right, that it was not easy... 4 first steps worked well and then fell on a problem with the hpsetup, because it was not on my computer.   Download drivers and software Web site, such as the drive no longer works (I have Vista Home Premium 64-bit).  Doctor of the printer does not work either... in any case it is configured now, but it took about 30 minutes to complete the configuration of the printer.

   

• Why do I get error "20019 ADC conversion failed" with my pci-6143, when I try to use the DIO lines?

  I am tyring to use one of the digital input lines on my PIC-6143 to go to the connection "enable" on the "write to file measure" vi.  I have two cards PCI-6143 acquiring analog signals of 8 channels per step, plus I have a digital DAQ assistant to the sample line of DIO 2 on one of the cards.  Normally I can start and stop recording using a signal of 5V to the DIO port several times until I get the error.

  Strangely, when I use a simple Boolean "Record" button at the port of the 'writing on a file as' enable vi, I never get this ADC error no matter how many times I press the button.

  I am including a screenshot of the error.

  Thank you

  Chris

  Please ignore this message.  The whole issue has been resolved by copying and pasting the VI in a new file in VI.  The new file ran perfectly.  Must have been a compilation of LabView or something error.

• Photosmart 7510: Photosmart 7510 print offset of text to the right

  I use MS Word 2010 and when I print the text it seems 7 mm offset to the right. e.g. fixed left margin at13 mm starts printing at 20 mm, and right margin at19 set stop mm 12 mm printing. The same offset is displayed when you use other applications for example Publisher, Zara, Photoshop etc.

  Top, bottom, header and footer print exactly in the correct position.

  Of course, I can adjust margins to compensate for this error, but it is a bit a nuisanse and offends my sense of! I have had this printer for 3 years and the problem appeared right from the first day. I have other HP printers, but they do not display this problem. My printer is connected directly to the computer via USB.

  Hello @GreatSimms,

  Thanks for getting back to me on this subject. I'm sorry to hear that the steps I have provided could not solve the printing problem. If the impression is always shifted to the right that which usually indicate an alignment as the text is not aligned correctly on the page.

  Could I please have you run an alignment for me just see if that makes a difference.

  1. On the printer control panel, press the Setup icon (), and then tap Tools.
  2. Tap the align printer.
  3. After the compliance, prints an alignment page.
  4. The successful alignment is displayed. Press OK to exit the screen.
  5. Examine the printed alignment page. It should show all models of color - especially the black and blue patterns. The ink must not be streaked or indistinct.

  

  If the printed document appears to be centered, could I please have print you another document on your computer to verify that the problem has been resolved.

  Please let me know the result of the execution of the alignment. If the problem persists, there is an additional discount I have executed him. Good luck!