FCoE directly connect to VNX5300 with no switch zoning

Similar Questions

• How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can?

  Switch issues. Help, please.

  How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can? We already checked the firewall as a question, that it was not, and now, we are puzzled.

  Well, I know that the issue is long-term... believe me, it's a long, but as they say, the devil is in the details. Anywho, the question is, my grandfather has a HP laptop, which for two years has been able to run through a Linksys switch to his router and connect its printers to his laptop. About two months ago it suddenly doesn't work like that. Now, it works fine if it plugs directly into the router/Ethernet. My uncle suggested that the switch was bad, but after testing the same port, cable and all, the switch worked well for him. ' GRAMPS really needs this answered, but someone else, it is called can not understand and now I, in turn, ask you all for what you can offer. Here are the ideas that we have already discredited.

  -Switch bad: as above, is that this particular laptop, even under identical conditions, the works of my uncle very well.
  -Bad NIC: debunked through the fact we connected to the computer directly to the router and it worked fine.
  -Bad configuration of the firewall: we have disabled the firewall (please do not notice, he wasn't the smartest idea, we already know) and even if she recorded the switch exists, the internet is always triggered when you are connected with the switch.

  Thanks in advance for any assistance that you can provide and Merry Christmas to you all.

  It would be useful to consult the results of the ipconfig/all command both when it is connected to the switch and when it is connected directly to the router.  In addition, what is the model of the switch?

  To save the manual copy and the new hits of the ipconfig/all command output-

  First connect through switch.
  Open a command prompt window (start > run > cmd > OK)
  Type the following lines in the black command prompt window and press ENTER after each line

  echo "Connected via the button" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".

  Now connect directly to the router, type the following lines in the command prompt window and press ENTER after each line

  echo "Connected to the router" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".
  Notepad '% UserProfile%\Desktop\ipinfo.txt '.
  output

  Copy the contents of the Notepad window in your response (if you use the laptop when it is connected directly to the router) or close the Notepad window, and then copy ipinfo.txt of the laptop to the Gramps in a USB FlashDrive you can connect to any computer allows you to answer.

  You can delete ipinfo.txt on the desktop when you are finished.

• FCoE storage direct connect in 1.4?

  Hi all

  I see the previous discussions that UCSM 1.4 should introduce support for stare directly into a Bay in the 6100 FC storage s. What is FCoE? A storage array with a frontal FCoE card (the new controller Compellent series 40 in particular) will be able to connect directly to the 6100 s?

  See you soon,.

  Simon

  Hi Simon,.

  Yes, in version 1.4, we will be able to connect FCoE targets to the Ethernet ports of the interconnection of fabric FC switch mode (61XX).

  Thank you

  ÖZDEN

• The Web of LabVIEW user interface directly to the sensor with Ethernet connection

  Hello

  Is it possible to connect to the interface user Web of LabVIEW directly to a sensor with Ethernet connection?

  By directly, I mean without using any Web Service LabVIEW VI.

  Thank you

  Marcelo

  Hello

  The only communication with other devices using the Web user interface designer is through web services, either motorized or not LabVIEW. To connect with a sensor with the generator of the user Web interface without using LabVIEW, the sensing device must be accessible via HTTP and give you a way to read its data using XML web services based on.

• Controller of domain and DNS behind RRAS without VPN connected directly to the internet with a Cisco router

  I hava a ME Cisco 3400 with physical single port available for a cable connection.

  The ISP give me an IP address interface = 89.120.29.89 to act as a gateway to the IP Address of the host, which is provided for in the order 89.120.29.90.

  The host computer is a dual Xeon computer with two NICs for LAN and WAN.

  Fields of application: to install a windows 2008 R2 between public and private network server.

  Even though I know it's not recomanded, I put the DNS role and directories Active Directory roles installed on the same computer, the computer above, (I do not have enough computer for roles different place on different computers)

  The desired configuration:

  To have installed with his roles behind a WS2008R2 has RRAS. without a VPN.

  b with VPN

  and for WAN access for the client computers of the private LAN Windows 7 OS. (The basin of LAN address 192.168.0.1 - 255).

  First step : to have internet access in the browser (I use Google chrome) (without taking into account the DNS and AD)

  Network configuration:

  Map NETWORK WAN, at the top of the stack of liaison in the Control Panel/network connections and sharing:

  Host IP: 89.120.29.90

  Mask: 255.255.255.252

  Gateway: 89.120.29.89

  DNS: 193.231.100.130 my ISP name server address.

  OK, I can browse the internet.

  Second stage. (Consider DNS and Active Directories)

  DNS instaled role for this computer.

  AD installed as a global catalog.

  NETWORK WAN server that is directly connected to the Cisco router:

  Conection area 3

  Properties:

  Client for Microsoft Netwaork: not verified

  Network Load Balancing: not verified

  File and shared printer: not verified

  QoSPacketScheduler: not verified;

  Microsoft Network Monitor 3 pilot: not verified

  IPv4                                                     ;  checked

  Pilot a Link Layer Topology Mapper i/o: checked

  Link layer Discover responder: checked

  IPv4 tab

  Host IP: 89.120.29.90

  Mask: 255.255.255.252

  Gateway: 89.120.29.89

  DNS: 193.231.100.130 my ISP name server address.

  under the tab advanced

  IP settings : even that, tab IPV4 with automatic metric check;

  DNS tab :

  Add primary and connection suffixes DNS specific: not verified

  Add suffixes primary DNS suffixes parents: not verified

  Add this DNS suffixes: no

  Registry deals with this connection in DNS: not verified;

  Use this connection DNS suffix in DNS registration: not verified;

  WINS tab : enable search LMHOST: not verified

  Enable NetBios over TCP IP: don't check;

  Disable NetBios on TCP IP: checked;

  Connection to the local network 2

  Properties :

  Client for Microsoft Netwaork: checked

  Network Load Balancing: no

  File and shared printer: checked

  QoS Packet Scheduler: not verified;

  Microsoft Network Monitor 3 pilot: not verified

  IPv4 checked

  Pilot a Link Layer Topology Mapper i/o: checked

  Link layer Discover responder: checked

  IPv4 tab

  NETWORK LAN CARD: 192.168.0.101

  Mask: 255.255.255.0

  Gateway: 192.168.0.1

  under Advanced tab:

  IP settings : even that, tab IPV4 with automatic metric check;

  DNS tab :

  Add primary and connection suffixes DNS specific: checked

  Add suffixes primary DNS suffixes parents: not verified

  Add this DNS suffixes: no

  Registry deals with this connection in DNS: checked;

  Use this connection DNS suffix in DNS registration: checked;

  WINS tab : enable search LMHOST: not verified

  Enable NetBios over TCP IP: check;

  Disable NetBios on TCP IP: not verified;

  Install RRAS as NAT (NAT) under any condition imposed by DHCP(not installed) in ideea that RRAS will generate the private IP address of the DHCP allocator.

  In any case, for the beginning, I have a fix IP, do not get IP automatically.

  At this point, it gets the configuration simple posible for RRAS follows:

  3, LAN connection that corespond to the WAN interface IP:

  "NAT configured for the following Internet interface: Local Area Connection 3.
  The clients on the local network will assign the IP addresses of the following range:

  network address: 192.168.0.0. netmask 255.255.0.0.

  After Windows RRAS are open:

  The Network Interfaces tab:

  NICs are enabled and connected;

  UAL remotely & policies:

  Launch NPS,

  on the NPS server tab:

  Allow access to successful Active Directory directories:

  Properties: authentication: port 1812,1645

  kept port 1813,1646;

  on the accounting tab: nothing;

  under NPS policies:

  Grant permission for the RRAS server under builin\Administrator of the accounts;

  On strategy and the type of server unspecified (NAT do not exist as an entry in the drop-down list server dwn)

  under the static road: nothing;

  under the IPv4 tab or both are there(there IP) and are up

  under NAT

  Connection to the local network 3: public interface connected to the internet

  enable NAT on this interface:

  under the address pool: ISP addresses public;(two addresses)

  under the terms of service and the ports: Web server: http 80.

  (I have I have a static IP address for the client computer in mind, I set up a single customer).

  At the client computer :

  configured as domain customer and added to the users AD and computer AD

  logon to the domain:

  Local Area Connection

  Properties:

  Client for Microsoft Netwaork: checked

  Network Load Balancing: not verified

  File sharing and printer: checked

  QoS Packet Scheduler: checked;

  Microsoft Network Monitor 3 pilot: not verified

  IPv4                                                     ;  checked

  Pilot a Link Layer Topology Mapper i/o: checked

  Link layer Discover responder: checked

  IPv4 tab

  Host IP: 192.168.0.101

  Mask: 255.255.0.0

  Gateway: 192.168.0.1

  DNS: (auto-add the same to the local machine).

  under the tab advanced

  IP settings : even that, tab IPV4 with automatic metric check;

  DNS tab :

  Add primary and connection suffixes DNS specific: checked

  Add suffixes primary DNS suffixes parents: not verified

  Add this DNS suffixes: no

  Registry deals with this connection in DNS: checked;

  Use this connection DNS suffix in DNS registration: checked;

  WINS tab : enable search LMHOST: not verified

  Enable NetBios over TCP IP: checked;

  Disable NetBios on TCP IP: not verified;

  right now the 192.168.0.101 client cannot connect to internet through RRAS.

  ;

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• BlackBerry Smartphones Groupwise address book sync with Nextel Direct connect # s for 8350i

  Is there a way to synchronize address books for groupwise and 8350i included nextel direct connect information?

  Thank you

  Mapping has resolved the problem. GroupWise has no corresponding to 'Direct Connect' field. To facilitate data entry, I traced the Direct Connect field in my 8350i with paginator field in my groupwise address books. Now Synchronization Manager BB the nextel direct connect #'s.

  The steps are:

  In the upper frame of the BB desktop, select Configuration synchronization; address book; Advanced; Field Mapping (bottom of list). Map an unused field in the address book of GW with the direct connect field in the 8350i.

  I assumethis would also work with outlook and others.

• Connect with independent switches vSwitch

  Hi all

  I am a newbie in VMWare and really not had in networking. Need your suggestion kindly for our VM infrastructure plan.

  Here's what I have (or will have):

  I create a small cluser (2 ESX, each with 6 NIC host). There are 2 stacked Cisco 3750 and stacked 2 4524GT Nortel on our farm in GE switch. Up to now, we have 6 virtual machines, but we intend to put all the servers the VM infrastructure.

  That was my previous plan:

  I did some research in the documents of VMWare and BBS.  I plan to ESX hosts connected to Cisco units, their link to GE in 2 units of the evening. Configure NETWORK adapters, port channels, load balancing, etc...

  An incident has changed my mind. A month before our network, group support updated nortel switches firmware. It's a nightmare. The Nortels 2 were dead after the upgrade. Had to pass all connections to the server of Nortel to Cisco and roll after that the call of Nortel has been set.

  My question:

  So let's say that sometimes the stackable switches will be dead together. Yes, I can connect an ESX with Cisco and another with Nortel. When stacked Cisco or Nortel is dead, we have yet another host working with switches lived. But I can connect an ESX with Cisco and Nortel? It seems more stable, isn't she?

  For example, I intend to use the 4 NICs for production and other for SC and VMkernel network interface cards. The production of 4 network cards are rising in a vSwtich. Failover and load balancing works when I connect nic0 / nic1 with Cisco and nic2 / nic3 with Nortel?

  My recommendation:

  Configure NETWORK adapters, port channels, load balancing, etc...

  Forget it. No team, no port channel. Just configure the uplink as junction ports ports and set the VLAN on the virtual port groups. VMware ESX (i) (with standard vSwitches) performs Round Robin load balancing based on the original default virtual port code, which is sufficient in most cases. With dvSwitches, you also have an option to configure NIC database load. In both cases you can use ports on all physical switches without having to think about making active configurations / standby at all.

  On the beat of the heart. Usually, I connect the Service Console to a vSwitch with 2 physical uplinks, each on a different network card and everyone to another physical having redundancy switch. What I actually do is to put the Service Console and VMotion that vSwitch and configure groups of ports for active / standby to ensure that each of them uses a dedicated NETWORK adapter unless there is a network outage.

  You must also consider switching to (installable) ESXi as ESX will be greater in the future. If you do not need to install agents on hosts etc, the only change will be that you will not have a "Service Console" more. For communication and management, you will have a «VMKernel network management» instad

  André

• See video from VideoWave to a TV with a direct connection?

  First elements using 12 can show us a VideoWave video to a TV with a direct connection?   By a direct connection, I mean using the HDMI port on my computer connected to the TV.   That avoids using a DVD.   The fine resolution and the image would be better than the creation of a DVD.

  I first Elements 9, and I do not have this ability.   First of 12 elements would have this ability?    THiiS would be like display of slides in PowerPoint that is connected to a projector.  If 12 first has this feature, I would upgrade from 9 to 12.

  Failla

  I don't know why you are in Share/webDVD.

  There is no other choice to share/computer/AVCHD into Premiere Elements 9.0/9.0.1.

  In Premiere Elements 9.0/9.0.1, there are choices in respect of the action/computer/MPEG with presets for H.264, 1920 x 1080. Have you looked there and tried these choices of export?

  First Elements 10, we share/computer/AVCHD.

  In the first items 11 and 12, there is publish + share/computer/AVCHD

  Many choices.

  Please let us know if you need any clarification on what it is written.

  Thank you.

  RTA

• Direct Connect with GPS or other active data

  I'm testing the possibility of using the functionality of direct connection to and from a phone while accessing other critical mission for my work tasks. We require the use of a tracking application that captures and sends GPS coordinates to a server via a data connection and also to connect to work through tasks via a web browser application. Direct connection cannot be launched on the phone while the user has any running application that uses data, it seems. It will work when the tracking application is closed and that the browser is slow and not loading pages, but doesn't if the browser will load a new page, the GPS application is running or even just Google maps. Can you get it someone please let me know if the i1 should be able to use Direct Connect when using other services that use data? I have been informed by Sprint that it is possible (two other applications can run on the data at the same time). The phone lacks a voice, only data plan.

  No, you can't. If something is using data on an iDEN connection, that's all. That's all it will do. It's just the nature of identity. If you want a phone that will have voice and data communications at the same time, you need to use CDMA or GSM.

• 1st generation ATV dead. Orange light but no screen and no resetting of distance.  I tried direct connection to Mac and iTunes open and he's not here.  Is it possible to restore to the factory without screen or remote work

  1st generation Apple TV is dead. Orange light but no screen and no resetting of distance. I tried direct connection to Mac and iTunes open and he's not here. Is it possible to restore to the factory without screen or remote workin

  I guess you tried maintained low men together for about 6 seconds - silver 1 ATV that will restart to the diagnostic partition but who would rely on the hard disk is functional and if it was ok that wouldn't work with the logic board failure.

  I guess you have not fed and attempted to restart.

  In case your AppleTV think it is paired with another remote try Menu and left arrow for 6 seconds - the light now intervenes when you press the buttons on the remote?

  Also, it could be in the video mode bad - try Menu and upward arrow together for 6 CES switch video modes, but implies that he actually started OK.

• LaserJet 2100 direct connect network assistance

  Hello techies.  I need help please.

  I have a HP Laserjet 2100 printer with a Jetdirect 600n (J3110A) card I am using with my plug for laptop Compaq V2615US as a direct connection.  It is without a server between the computer and the printer.

  Has been fighting for more than a week. Time for me to reach and ask for help.

  It is not recognized.

  Print a page of Cofiguration Jetdirect info I get the following information:

  LAN HW address: 001083F3A247

  External Loopback 03 error is NOT READY i/o card

  TCP/IP STATUS: 55 CURRENT BOOTP/DHCP

  HOST NAME: NPIF3A247

  IP address: 0.0.0.0

  IPX/SPX STAUUS: impossible to 29 net number of senses

  NAME OF THE NŒUD: NPIF3A247

  I was able to CLEAR the error of closure by doing a loopback plug.

  Using the network printer wizard I tried individually enter either the host name, IP address, LAN HW or name of the node above the address in the appropriate box.  NONE of them worked.

  Somewhere, I saw a reference to a supposed "default" IP address of the 192.0.0.192.  Tried it as an IP address, nothing helps. Received a message on the screen indicating that it was a 'default' address and suggesting that it was not fair.

  My computer's network card is a Realtek 8139/810 x Family card that is declared as working correctly by my computer and has already been used in the past in this way with a different printer.

  Key questions are:

  1 what I'm missing or doing wrong?

  2 - is a dead Jetdirect card?

  I can access a Jetdirect 620n card, but the application list I've seen doesn't have the list of the 2100 as a printer there.

  It would be worth to try myself to a substitution of the 620n for my 600n card?

  Thanks in advance for your help.

  John

  "LittleJohn1969" wrote in message News: * e-mail address is removed from the privacy * .com...

  Hello techies.  I need help please.

  I have a HP Laserjet 2100 printer with a Jetdirect 600n (J3110A) card I am using with my plug for laptop Compaq V2615US as a direct connection.  It is without a server between the computer and the printer.

  Has been fighting for more than a week. Time for me to reach and ask for help.

  It is not recognized.

  Print a page of Cofiguration Jetdirect info I get the following information:

  LAN HW address: 001083F3A247

  External Loopback 03 error is NOT READY i/o card

  TCP/IP STATUS: 55 CURRENT BOOTP/DHCP

  HOST NAME: NPIF3A247

  IP address: 0.0.0.0

  IPX/SPX STAUUS: impossible to 29 net number of senses

  NAME OF THE NŒUD: NPIF3A247

  I was able to CLEAR the error of closure by doing a loopback plug.

  Using the network printer wizard I tried individually enter either the host name, IP address, LAN HW or name of the node above the address in the appropriate box.  NONE of them worked.

  Somewhere, I saw a reference to a supposed "default" IP address of the 192.0.0.192.  Tried it as an IP address, nothing helps. Received a message on the screen indicating that it was a 'default' address and suggesting that it was not fair.

  My computer's network card is a Realtek 8139/810 x Family card that is declared as working correctly by my computer and has already been used in the past in this way with a different printer.

  Key questions are:

  1 what I'm missing or doing wrong?

  2 - is a dead Jetdirect card?

  I can access a Jetdirect 620n card, but the application list I've seen doesn't have the list of the 2100 as a printer there.

  It would be worth to try myself to a substitution of the 620n for my 600n card?

  Thanks in advance for your help.

  John

  Without any kind of switch between the printer and the computer, you absolutely have a cable modem Simulator for your connection "ethernet".  You will NOT be able to use a standard ethernet cable.
   
  Once you find this crossover cable and that you ran a test on the printer print to the default IP address (read the printer or jet direct instructions on the card to print or otherwise find the Jetdirect card settings) then you can create a new "printer port" using the IP address of the card direct jet to join the two.    192.0.0.192 isn't usually an IP address by any device (I've never seen anywhere.)  It would more likely be something like 192.168.1.xxx.
   
  Also, you should be able to buy a switch 4 ports and do the same thing with standard ethernet cables.  Plug the computer and jet direct card printer on the switch.

• EqualLogic PS6100X: direct connections (double) iscsi to 3 vmware ESX host

  Hello

  Due to the reduction of costs, we integrate

  1 x ps6100x Dell Equallogic (2 controllers to each 4 ports)

  3 x dell poweredge r720 (each have 2 ports dedicated for trafficking SAN storage)

  vSphere 5.5 (shared storage on the San)

  Without the use of SAN switches. Each host has dual direct connection (1 to each SAN controller) with the initiator iscsi software.

  We did before with Dell MD3200i, who has also 2 controllers and 8 ports, so we expect no problems.

  But now that I have read on the Equallogic, I'm starting to become uncertain if this Setup will work?

  I know that this is not recommended, but at this point, my only concern is that it will work (even with less performance).

  Can you please give me some advice on this?

  Best regards

  Joris

  P.S. If this is probably NOT possible, what would be the best/low average cost to make this possible?

  I've seen this failure at work, as in the connections dropped, BSOD was virtual machines with a single host with no switch.  iSCSI traffic tends to be very burst, which is having when the right switch pays you back.

  Re: 3750 X are those good switches, there is some adjustment settings that need to be addressed.  Also to solve a flowcontrol problem download the most current IOS firmware.

  For such a small group / number of servers, the stacked 2960 would be OK.  Perhaps to problems later if you need to scale this environment.  lack of 2960 allocate buffer, then you want to start without Jumbo frames, all enter into stable and of good practices.  So maybe later try enabling it.  3750 X works very well with Jumbo and Flowcontrol active BTW.

  These choices are better than no switch miles.  3750 x were pretty expensive last time I looked.  Unless you have a little already.  If you share them with the rest of the traffic that is not optimal, but at least put all ISCSI traffic on its own VIRTUAL local network.

  4948 are the right choice.  Some high-end HP switches.  Step away from the elders, like 2810 or 2824/48.  They seem to be there for cheap $$ but are designed for GbE Office not GbE iSCSI.

  Kind regards

• Cisco's C series server using direct connect to UCSM ping

  We have the 2 C of Cisco series connected servers (VIC 1225 cards) direct connect to the fabric of the interconnections and managed via UCSM but cannot get network working.

  Service profiles have been created and pushed with only 1 VLANS and VLAN as the default native but cannot communicate with the configured IP address.  Address Mac is learned at the northbound Nexus 5 K switches.  Seems to be a VLAN tagging problem somewhere

  You can test the MMIC?

  I bet it has to do with the tagging Vlan; I would advice to set your vlan natively and it will work!

  PS. I assume of course that you have installed the appropriate driver enic

• HP OfficeJet 200 series Mobile: 3 Surface Pro WIndows 10 - can't re eastablish wi - fi direct connection

  Hello

  We managed to connect our Surface Pro 3 Windows 10 running on a mobile printers HP OfficeJet 200 series using a Wi - Fi Direct connection not wireless. The problem is that whenever we turn the printer off or go to sleep Surface pro cannot re esatablish of connection with the printer again after on. In the device and printers OfficeJet 200 is still there but greyed out and has a status to be offline even if the printer has been for a while.

  The only way to connect it must make the entire process of reconnection to the Wi - Fi direct connection, for example by typing in the code and wait to see the device is connected. It should not this printer to establish a connection with the surface pro automatically after power on, yet the pro Surface shows that the printer is offline and I know that I had direct Wi - Fi together to establish the connection automatically. Is there a solution for this.

  The problem only occurs when the printer stops and he must turn it off to save battery because what get out us them for field work.

  We discovered that the Wi - Fi Direct is not fully supported in Windows 10. The only way you can reconnect to Wi - Fi direct is if you connect to the printer that you connect to an access point Wi - Fi. If you do this your Wi - Fi direct printer connection will be reset. The downside is that your Surface Pro 3 will lose the internet connection.

  For us, that our solution is not to use Wi - Fi direct and use the Wi - Fi function. We connected the mobile series HP OfficeJet 200 to our iPhone hot spot and we also connected the Surface Pro iPhone hotspot. Whenever we connect our tablet to the hotspot, we can use the printer because the printer is always connected to the HotSpot.

• Satellite L20-101: could not connect my TV with the svhs

  Hi guys,.

  I have a problem.
  I have a L20 - 101 and I can't connect my tv with my toshiba svhs output.
  I reinstalled the drivers for the motherboard and videography, what can I try?
  Thank you

  Okay, it looks like a really not nice problem.

  So, how do you try to switch to the TV? You have the possibility in your display properties, but not the machine * recognize * the TV? You also have the FN + F5 key combination to change the display, have you already tried?

  And regarding your display drivers (including vga you? nvidia or ati?)

  You can take a look here to find the latest drivers to work for mobile platforms:

  http://www.laptopvideo2go.com/
  http://www.OmegaDrivers.NET/

  Good luck buddy