file c:\windows\system32\devmgmt.msc. is missing. How to restore

Similar Questions

• Cannot open Device Manager or services.msc a message box pops up it says "MMc cannot open the file C:\Windows\system32\devmgmt.msc.

  Original title: I can't connect to my wireless network. My convenience store does not work and I can't open the network and sharing Center. I'm sure it's some type of virus. Help, please.
  It says "an unexpected error has occurred. The Troubleshooting Wizard can not continue. "When I try to run the troubleshooter.

  When I try to open Device Manager or services.msc a message box appears, it says "MMc cannot open the file C:\Windows\system32\devmgmt.msc.

  He said also my Defender pro subscription has expired, even if I've just recently added a one year subscription.

  Hello

  You did changes to the computer before the show?

  Method 1:
  Try these steps and check if it solves the problem:
  a. click Start, type cmd, right click and select run as administrator.

  b. at the command prompt, type regsvr32 msxml3.dll , and then press ENTER.

  Method 2:
  Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 3:
  Run a Microsoft security scanner to make sure that the computer is free from virus infection:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  WARNING:
  If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also if the files and folders are affected by the virus, while they might even get deleted

  See the steps in the link and check.

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• MMC cannot open the file C:\Windows\system32\devmgmt.msc.

  I was upgrade from Vista 64 for Windows 7, early in the process, I lost the use of my cd player.  I'm unable to download the drivers.

  ·                        http://support.Microsoft.com/kb/982116/en-AU

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  See if the information above solves the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• MMC cannot open the file C:\windows\system32\WF.msc

  When I try to open the Action Center, I receive this message. MMC cannot open the file C:\windows\system32\WF.msc

  Hello

  Thanks for posting the question in the Microsoft Community forums.

  According to the description, you get a message of error 'mmc cannot open the file C:\windows\system32\WF.msc' when you try to open the center of the Action.

  We will perform the steps and check.

  Method 1:

  
  Try to access the Windows Firewall configuration through the console Microsoft Management console.
  
  a. click on start
  b. type MMC (right-click and choose Run as administrator)
  c. click on file (in the upper right corner)
  d. click Add/Remove snap-in software component
  e. Select Windows Firewall with advanced settings, in Add Remove snap-ins windows
  f. click Add (clicking ok does not make any changes)
  d. click OK and you should be able to use the settings of the Console 1 window.
  
  Method 2:
  
  If you are able to use the settings of the firewall through MMC, then scan your computer for corrupt system files.

  Perform a SFC scan on your computer. Consult the following link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Hope this information helps. Please reply with the status so that we can help you.

• Could not open computer management. I m, like__MMC error message cannot open the file C:\WINDOWS\system32\compmgmt.msc

  I am the administrator total privileage still i'm getting the following error...

  MMC cannot open the file C:\WINDOWS\system32\compmgmt.msc

  It is perhaps because the file does not exist, is not an MMC console, or was created by a later version of MMC. Perhaps it is also because you don't have sufficient access to the file.

  I am the administrator total privileage still i'm getting the following error...

  MMC cannot open the file C:\WINDOWS\system32\compmgmt.msc

  It is perhaps because the file does not exist, is not an MMC console, or was created by a later version of MMC. Perhaps it is also because you don't have sufficient access to the file.

  Hey Sandy_Nepal

  read the answer below

  http://www.Winhelponline.com/articles/72/1/error-message-when-you-try-to-open-a-MMC-console.html

  http://www.allpostnews.co.UK/II27/compmgmt%20msc%20error%20messag.php

  Walter, the time zone traveller

• Windows 2k8R2 - receiving error when you connect (MMC cannot open the file: C:\Windows\system32\ServerManager.msc)

  Windows 2008 R2 - I just started getting this when I connect, and also when I try to manage the machine:

  MMC cannot open the file:

  C:\Windows\system32\ServerManager.msc

  It is perhaps because the file does not exist, is not an MMC console, or was created by a later version of MMC. This may also be because you don't have sufficient access to the file.

  It always worked before and work for other users simply not me on this particular area. It is a production company, and I need a quick resolution please. Thanks in advance.

  PM

  Hello

  Your Windows is better suited for the public of Windows Server on TechNet. Please post your question in the TechNet Windows server forum.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer

• Vista \Windows\system32\winload.exe is missing, how can I get the Windows installation disc?

  I have a HP Pavilion dv6500 Laptop, I'm trying to restore my system, but the system wants to use a Windows Setup from disk because my windows/system32/winload.exe could not be loaded"status: 0xc000000f Info: the selected entry could not be loaded because the application is missing or damaged. »

  The windows installation is located in the machine, and apparently the recovery has not copied as part of the recovery disk.  I tried to identify if a recvery kit was available and it seems that maybe not.  What must I do to fix this?

  Have you tried to type the F11 key immediately after switching on the laptop. This should start in the hard disk partition recovery.

  You should be able to order by phone recovery disks. If you are USA / Ca... 1-800-474-6836

• can not do a disk defragment - C:WINDOWS\system32\dfrg.msc

  Original title: can not defragment

  MMC may NOT OPEN THE C:WINDOWS\system32\dfrg.msc--like hayshaker1 but my hp pavilion a1203w did not come with a cd of xp

  When you click Defragment now for a player if you see a message like this:

  MMC cannot open the file C:\Windows\system32\dfrg.msc.

  It is perhaps because the file does not exist, is not an MMC console, or was created by a later version of MMC. Perhaps it is also because you don't have sufficient access to the file.

  Somehow (perhaps malware) the msxml3.dll file became unregistered, then re-register the file.

  Click Start, run and enter in the box:

  regsvr32 msxml3.dll

  Click OK and you should see a message like:

  DllRegisterServer in msxml3.dll successful.

  Test your button defragment now.

  There are several problem with hayshaker1 wire.

  The thing suggested trying guess you have an XP CD

  The thing suggested to try will not solve the problem.

  If the dfrg.msc file was really lacking, you will get a different error.

  The thread has no happy ending.

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• my files show that I'm missing windows\system32\dfg.msc

  When I try to defragment my system it says I'm mising windows\system32\dfg.msc

  The error message probably indicates that dfrg.msc is missing (you left the r).

  Do a search on your entire C drive to DFRG.msc

  Assuming that he is really gone, download on my SkyDrive, and put it in C:\Windows\system32.  Click on--> here
  Note that depending on which browser you use to download it, you can not see the MSC file extension in the list and when you download the file it also doesn't have the correct file extension.  If necessary, rename the dfrg.msc file when you save it.

  You can also defragment your drive by opening a command prompt window (start > run > cmd > OK) and typing

  Defrag.exe {press Enter}

  You must use the switches and parameters, as explained here--> http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/defrag.mspx?mfr=true

  For example:

  Defrag.exe C:/v {press Enter}

• the c:\windows\system32\gpedit.msc file is missing

  I am trying to edit my setting lan under windows but I can't edit group access policy where I'm going. I get an error that the file is missing or I don't have access to it. I do not have access, but the file is missing.

  c:\windows\system32\gpedit.msc

  "gpedit.msc" is no not part of Vista Home versions.

  See you soon. Mick Murphy - Microsoft partner

• Error message on my Vista computer: missing or damaged file: C:/windows/system32/drivers/ATAPI.sys. (Status: OXC0000098). NO RECOVERY DISK! (lost).

  Missing or damaged file: C:/windows/system32/drivers/ATAPI.sys. (Status: OXC0000098). NO RECOVERY DISK! (lost). How can I recover my system, if possible? It does not even start.

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  The Startup Repair tool can repair atapt.sys.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, try to start in safe mode (click on the F8 key during startup and go into safe mode with network - or using the prompt from the disk, if necessary, several times).  Then we will check some of your system files:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator (skip thiis step if you use the disk)...

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.  In a best-case scenario, he'll fix Atapi.sys.

  While in the command prompt, type chkdsk /f /r and enter and let it run.  It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.

  If it does not, then thanks for posting any repetitive error message in Event Viewer on startup (Start / Control Panel / administrative tools / event viewer - type eventvwr and enter, if do it from the command prompt).  Here's how to use Event Viewer: http://www.bleepingcomputer.com/forums/topic40108.html.

  I hope this helps.  Post back the results of the analysis and attempts to repair if these do not work.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• Error: c:/windows\system32\whatyouclickedon.msc the service cannot accept control message

  Help so confused trying to attach 1 get prob. an another system32 group policy error as no system restore and the control panel will not work correctly and sometimes logon I have no user profile

  someone please help im so confused, I got something weird, I guess that this auto downloaded on my computer do not know it showed up in my toolbar at the time and it looked like the symbol of windows firewall but wasn't it was a supposed antivirus program who wanted to buy me out well I got the blue screen a second after I saw it and my anti virus program did not I spent hours and now am Finally able to connect under normal start up instead of safe mode I think pretty well I found it, I saw an add on IE at the exact moment it happened and it turned off and was able to start fine have not seen since scanned for all after normal startup and he found nothing, but I find myself with these weird problems since this thing very happened from time to time as each start 2 ups or so on normal startup, I don't have any trash a few icons, fonts is very basic and small and it appears a message sayingsomething is wrong with the user profile and I restarted and everything comes back, but I try to get into the control panel and I can load it fine but when I try to enter the administration tools , it appears c:/windows\system32\whatyouclickedon.msc the service cannot accept control currently message I went to a Forum on here and read a similar and tried solution of type cmd at the command prompt in the search bar and he was able to load regularly but when tried run as administrator happens with the same message when I go into Control Panel as I prev said so I can't do the sfc/scannow and finally I tried to solve by doing a system restore but now it says the same message in the Control Panel, but before he kept coming because it has been disabled by group policy and when trying to get to the group policy I couldn't I'm so confused my head is spinning but I'm not completely stupid comp. don't know where to start or if all these things are a coincidence or really are related may not think about what I'm missing please help!

  You have not completely removed malware.

  Scan with this program:

  If necessary, do all the workSafe Mode with network.

   

  To get intoSafe Mode with network, press F8 at the Power On / boot and use key arrow upward to get intoSafeMode with networking from the list of options, and then press ENTER.

   

   

  Read all the information below before you start:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  How to use Malwarebytes after installation:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that thePerform full scan option is selected and then click on theScan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button toview the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  See you soon.

  Mick Murphy - Microsoft partner

• When running defrag, error "MMC cannot open the file c:\WINDOWS\system\dfrg.msc.

  When I run the defrag I get a message that says "MMC cannot open the file c:\WINDOWS\system\dfrg.msc. It is perhaps because the file does not exist, is not the MMC, or was created by a later version of MMC.

  Hello

  I tried the steps before I posted my question, but it did not work. However, I downloaded SP3 again and it seems to work now.
  Thank you

• Windows cannot find 'C:\WINDOWS\system32\services.msc/s '.

  My laptop broke down. I had to restart from my CD. But I have a problem with connecting to an existing wireless network. When you try to configure the automatic configuration service, I followed the steps as suggested. 1. click on start, then run 2. In the box, type C:/Windows\system32\services.msc/s. After this point, a message board appears saying that "Windows cannot find 'C:\WINDOWS\system32\services.msc/s'. Where can I get it?

  Thank you very much.

  Petra

  Hello world

  just to say that I finally discovered.

  I tried setting advanced on my Dell Wireless WLAN Card Utility and even if all my devices possible kept seeig my authetication as 'open' network, it was actually 'shared '. That's all. Stupid isn't. Now, I'm happy that I'm connected and without cable again.

  A big thank you to you all and especially the PML for help.
  P :))

• BAD IMAGE FILE: C:\WINDOWS\SYSTEM32\TOTUROBE. DLL

  Original title: BAD IMAGE FILE: C:\WINDOWS\SYSTEM32\TOTUROBE. DLL NEEDED TO REPAIR THE

  Send to * address email is removed from the privacy *.

  Its malware. Start in safe mode / networking. Download Malwarebytes update, then do a full scan