Firefox 38 update hangs during the rsyslog config on LinuxMint 17.1 cinnamon?

Similar Questions

• Virtual Appliance update hangs during the preparation stage of files

  It is a continuation of my attempt to upgrade this thread saga:

  

  I've been trying again to do the upgrade, but the last 2 attempts seem to stagnate outside in the scene where he says that she prepares the files, and mail is still delivered. Since it's the virtual appliance, I could make a snapshot before starting and then go back to it in case of failure, which I am very happy for.

  This same problem happened to me on an update there are several years and Sonicwall tech support person he restarted just for me and then again upgrade - if I remember correctly - and then it worked. But when I tried, he got always outside. Is there anything else I can try?

  Make sure you use the correct upgrade file.

  The one that ends with. sh.

  Make sure also that he has not been renamed or had added nothing to it when downloaded and saved.

  The other that you download is for the deployment of a new virtual appliance.

  If you are very low on disk space, you may need to look at what is using that space.

  What is the junkbox?

  You probably want to prosecute and to talk to a technician.

  If there is not enough free space, the upgrade process may fail.

• I am trying to install windows xp from the disk, but it hangs during the installation process. no error code. It just hangs. What is the cause and what is the solution?

  I am trying to install windows xp from the disk, but it hangs during the installation process. no error code. It just hangs. What is the cause and what is the solution?

  Hello

  1. at what stage of the installation, the computer crashes?

  2. what operating system was installed on your computer prior to this?

  If you have the similar problem as mentioned in these links, you can follow these links and check if the problem persists:

  Windows XP Setup stops responding (hangs) during the "Preparing Installation" phase

  Windows XP does not meet the Message "Setup starts Windows XP"

  Hope the helps of information.

• Anyone know what to do if you get an error of update (U44M1I200) during the installation?

  Anyone know what to do if you get an error of update (U44M1I200) during the installation?

  U44... Update error http://forums.adobe.com/thread/1289956 can help

• Cannot install roboform 7.9.8.5 in every night, does not allow the selection of Firefox to be selected during the installation. go to address?

  Windows 8.1 last Firefox, Roboform 7.9.8.5.
  During the installation of Roboform and selecting the browser to install it on the only browser which is selectable are IE, firefox and chrome are grey.

  33.0 Nightly of Firefox is a version of alpha 1 pre-release tester.
  Check with Roboform to see if they take over the alpha or beta of Firefox versions.

• HP Pavilion 23: computer hangs during the boot process

  Computer updates been made 2 days ago and has frozen black screen. Now does not start at the top. Starts the process and then freezes. He did start once yesterday and was going well for a few hours, then got a message saying computer had a problem.

  Error message:

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED (atikmdag.sys)

  Now back to not start upward again, hangs with the HP logo on the screen.

  Hi there @ldgie25.

  That the Forums are with you!  I understand that, after a few updates, your computer does not start correctly and freezes on the HP logo.   I'm happy to help you with this.

  Since it was started once, but then had a blue error screen, I suggest using the computers HP - use Microsoft System Restore (Windows, 10, 8).   Follow the instructions in the section «restore your computer when Windows is unable to boot normally»  See if it will start normally after the restoration. If yes then you probably want to prevent the offending update to install again.

  Please see the following for how to do this:

  How to temporarily prevent an update for driver reinstallation of Windows 10 - support.microsoft.com

  How to uninstall and updates to block and drivers on Windows 10 - howtogeek.com

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Satellite Pro A10 hangs during the installation of Win XP

  Hi guys,.

  just thouth I would ask why my new laptop will not install XP.
  Only, it crashes during installation. No n' achete purchased on this occasion, had no operating system installed.

  I wonder if it's a driver problem, using my xp disc I bought, but like I said that just, it will hang during installation.
  What I need to intergrate drivers somehow?
  I'm guessing that this is the problem?

  If so, how do I?

  see you soon

  I really wonder that your new laptop is probably produced about 5 years ago. ;)

  In any case, to install WXP use WindowsXP SP1 installations CD (factory settings). If you want to discuss a little more please explain to us what exactly is happening.

• Update failed during the restoration of Win10 for Win7

  Hello

  There was a update failed while he was in the process of restore. Once the process is finished, I noticed that, so I clicked on "Install updates". Which also failed.

  I've never met update of the issues before the restore Win10 to Win7.

  Name of the update problem :

  -Microsoft .NET Framework 4.6.1 for Windows 7 for x 64 (KB3102433)

  Type of computer / OS :

  -Hewlett-Packard desktop computer bought in 2011, AMD Athlon (TM) II X 4 955 processor 3.20 GHz, 8.00 GB of RAM

  -Windows 7 Home Premium (preinstalled at the factory), Service Pack 1, 64-bit

  Antivirus applications installed before the upgrade and at a Win10; those after cancellation for Win7 :

  -Windows Defender (off)

  -Malwarebytes Anti-Malware free (do not prompt for reinstallation, update to Win10, have not opened since rollback)

  -AVG AntiVirus Free (relocation for upgrade to upgrade to Win10 successful, reinstall to update to Win7 after restoration, failure)

  Previous programs anti-virus installed / uninstalled :

  -factory pre-installed Norton Internet Security 2011 (60-day trial subscription). Uninstalled in 2011.

  -ISP provided security: Shaw Secure powered by F-Secure. Uninstalled in 2012.

  These are in the downloads folder (but I don't know more what/why and can't tell if they are installed programs or not) :

  -Windows-KB890830 - x 64 - V5.20.exe: Microsoft Windows Malicious Software Removal Tool, version 5.20.11000

  -msert.exe: no details of properties (no version, no digital signature, etc.), but I think that it is supposed to be the Microsoft Safety Scanner

  -windows-kb890830 - v3.21.exe: Microsoft Windows Malicious Software Removal Tool, version 3.21.5103.0

  -NPE.exe: Norton Power Eraser, version 2.0.0.52 the file, version 2.0 product, year 2011

  Latest updates successfully and the repetition does not install of KB3102433 :

  

  Error codes for KB3102433:

  -26/08/2016: 80200001

  -29/08/2016: 13EC

  -03/09/2016: 643

  -03/09/2016: 643

  Measures taken and the results:

  1) has no installation by the restore process: (KB3102433), 80200001 Code

  -revealed by timestamp in the update history

  (2) Windows Update interface: 1 important update available (KB3102433)

  -Click on install updates

  Result (s):

  -Failed / update history does not record the event

  3) of http://support.microsoft.com/kb/3102433

  -Download and run the "download the .NET Framework 4.6.1 (Offline install) package now"

  Result (s):

  -"Installation failed...". Fatal error during installation"

  -Updated story does not connect me

  (4) download and run the Windows 7 update (wu10.diagcab) troubleshooting tool

  Result (s):

  -Popup: An error occurred when troubleshooting: a problem is preventing start the troubleshooter.

  Identifier of the package: WindowsUpdateDiagnostic

  Path: unknown

  Error code: 0 x 80070002

  Source: engine

  User: (me, user Admin account)

  Context: restricted

  (5) run the System File Checker tool

  Result (s):

  

  (6) Windows Update interface: 1 important update available; KB3102433

  -Click on install updates

  Result (s):

  -This time the story recorded event update:

  Installation date: 29/08/2016

  Installation status: failed

  Error details: Code 13EC

  (7) download and run other troubleshooting of Windows 7 update (WindowsUpdateDiagnostic.diagcab)

  Result (s):

  -He scored a few points set except one:

  -"" Problems: Windows Update, error 0 x 80070057 do not set ""

  -This stage caused the update Interface to turn red on the theme and lose all it's information. such as:

  -1 important update available / 8 optional updates available <> before - now -online NO update available

  -Final check of updates: front: 29/07/2016 - now: never

  -Updates have been installed: front: 22/07/2016 - now: never

  -"Install updates" button "Check for updates" has disappeared, replaced by

  8) of http://support.microsoft.com/kb/3102433

  -Download and run the "download the .NET Framework 4.6.1 (Offline install) package now"

  Result (s):

  -"Installation failed...". Fatal error when installing... See log file»

  -Updated history do not log the event

  

  (9) click on ' Check for updates ' hopefully bring "updates available".

  Result (s):

  -He kept checking for about 2 hours without change

  -I didn't know how to cancel the verification process, then...

  (10)... Computer restarts

  Result (s):

  -updates stops

  -Updated Interface:

  -Does not display available updates

  -Final check of updates: never

  -Updates have been installed: never

  * 3 days later, without getting any change, it automatically installed 9 updates successfully. Now, the update Interface is once again changed. "Show all available updates" option appears, horodateurs, replacing '' never. ''

  (11) select problem update (KB3102433), and then click on install

  Result (s):

  -A failed; Error Code 643

  -Click on 'Try' again: same results

  Any help would be greatly appreciated.

  Thank you

  Proceed as follows: Set "Never search updates" automatic updates, restart, and try again.

  Best regards, VZ :)

• [SOLVED] Windows 7 hangs during the "you want to allow this program to make changes to your computer.

  I was recently on my computer and running windows 7 with happiness and problem free, until I downloaded a file from the internet. When I opened it, windows asked me if I want to allow this program allow changes. However, there is the rub. When I click on 'Yes', the message will disappear, but the computer hangs at the screen has gone even a light, tinted gray, with all of the programs that are still running in the background. It freezes for about 2 minutes and then decides to return to normal, free for me to return to work and navigation. However, the program that I have originally intended to be performed by him to make changes didn't work at all. Confused, I ran over and over again, but with very little success, and the problem continued to appear. I tried to launch a clean boot, but that doesn't help more. Can someone help me please? Thanks :)

  Thank you for the support, but I solved the problem.

  I did a system restore, and it seems that a microsoft critical update was the culprit of all this? In any case, everything seems to work now and thanks again for all the support and help, I appreciate it a lot :)

• HP Pavilion p6-2069sc: computer hangs during the HP splash screen

  Hello.

  I plug an ASUS GeForce GTX STRIX 750Ti to use in my Pavilion P6 - 2069sc, but when I start the computer after installing my GPU, the screen hangs on the blue HP startup screen.

  When I try to hit the ESC key to enter the BIOS or any other keys it comes just a beep of the machine.

  It is a long beep every 20 seconds or so from the computer.

  When I use the integrated graphics card, everything works as they should.

  I already upgraded to 550W 300W POWER supply

  Because your computer has been manufacturer Sept 2011, there Legacy BIOS.  The latest vBIOS UEFI was initiated at the HP units at end of 2012.  That said, either you stay with a Legacy BIOS GPU card, or choose a dual hybrid card BIOS.  The GTX 660, or GTX 670, all of which are two high-end of the legacy card would be far superior to the GTX 750Ti.   All the current hype is looking for a lower quality card, the 750Ti, based on the more low power and some GTX offering a BIOS hybrid via Select manufacturer. The Asus could not be hybrids, as you can testify.

  http://www.hwcompare.com/17301/GeForce-GTX-660-vs-GeForce-GTX-750-TI/ 450W SS6

  http://www.hwcompare.com/17306/GeForce-GTX-750-TI-vs-GeForce-GTX-670/ 550W PSU

  http://www.GeForce.com/hardware/desktop-GPUs/GeForce-GTX-660/specifications

  Based on your existing new POWER Pack, (hopefully a quality unit), 660 GTX would be good.  In my humble OPINION, an EVGA GTX 660 is better based on your power supply of the system. Please call EVGA for re - check a Legacy BIOS.

  PS I have a EVGA GTX 660 and 670 in my BIOS Legacy of <>towers.  I tried an ASUS, but he did not have an ASUS motherboard. Strange, but ASUS check the fault has his own card. Cost me $50 return shipping cost, so Please check with any manufcacturer.

• Windows Update crashes during the installation of update

  I was recently asked to restart my laptop (under Vista Home Premium) because Windows downloaded updates. I cut and updates began to install. The computer is now fixed as "Installing update 4 of 9» It has been more than an hour on the update 4 with the cursor turns but no progress.

  Any help would be greatly appreciated.

  Hi Charles1973a,

  1. what update has recently been installed on the computer?

  2. you receive an error message?

  3. do you have a security software on the computer?

   

  First, restart the computer and try to install the update one by one.

  See the Microsoft article below as well as try the steps mentioned so that you cannot start Windows after you restart the computer, check if it helps.

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/949358

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My PC says: I have an update. During the update I get message "WindowsUpdate_0000737D" "WindowsUpdate_dt000" message. I can't find any documentation about it. What is up.__I have Windows Vista Ultimate Edition.

  I get an error message and cannot determine what the problem is.

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Vista Home Premium update froze during the 'configuration' June 30, 2009.

  Received notification of five updates to install on my computer Windows Vista Home Premium, one of them being Internet Explorer 8.   All the downloaded slowly.   Each of them appeared to install, but slowly and I left the computer while he was installing the 3rd update.   When I came back it had evolved in the 'Configuration' screen (always see after there are updates and it restarts) and sat there for hours.   It reads "Configuring updates: stage 3 of 3, 0% complete.  The percentage of nevers turns off 0%.   I finally turned off the computer and when she started he said windows had not closed properly so I chose the Safe Mode option.   He immediately went the same configuration screen.  I left it again for 4 hours, but no change.   What should I do?

  The laptop is a HP tablet PC.

  Here's how to uninstall the ones you don't want.

  And how to change the settings of update and IE8 HIDE update!

  Click Start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the bad.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• Firefox crashed after night.tried last updated flash to uninstall firefox and it crashed during the uninstall.now when I try to reinstall firefox 8 it hangs on doing a small screen of household overall upward. What should I do next?

  This is not the first time I had to update flash corupt my firefox, but this time I was unable to reinstall firefox. I am running windows XP Edition SP3 family. Processor AMD Athlon 64 3500 + 2.21 GHZ with 3.25 GB of ram.

  You are welcome

• SL410 hanged during the update of the BIOS

  Same thing happened to me to what is described in this post BIOS problem

  So basically the BIOS update utility hung on the stage where he asked me to restart the computer.

  The YES button was stressed, but neither the keyboard nor the mouse pad reacted.

  I tried external keyboard and mouse with no luck so I decided to stop by pressing the power button.

  The laptop starts now but it will restart after a few seconds, not even doing the Windows logo.

  I disconected from the BIOS backup battery and now when it starts I get ERROR 0199 but has access to the

  The utility BIOS Setup now.

  Are all the pins on the card which would reset the CMOS?

  After some fiddling I found that the solution was to get into the BIOS as suggested, and then press F9 to restore the default settings, and then click F10 to save. Now all works again