FireWire and my camcorder

Similar Questions

• Import analog Video8 through Firewire and Digital8 camcorder problem

  Hello!

  I've got a few Video8 tapes from a Sanyo camcorder that's dying, so I bought an old camcorder Sony DCR-TRV480E to eBay which allows to capture Digital8, but also reading and listening to the Video8 and Hi8.

  I finally got the camcorder and tried to play back Video8, immediately, it changes the function of reading and my old videos with audio built-in to confirm and DNR view (s). All good so far.

  Then when I plug in my MBP 2011 (Yosemite) via the FireWire 800 port, then choose Import my camera (not supported) appears and plays video and audio beautifully when you click on "import". Only problem is - it doesn't matter! "He said," any device "in the upper right corner, even if it is the video with the audio in the window of import with no problems.

  The same thing happens in iMovie.

  Anyone who has seen the same problem? I want my DV imported into FCPX without loss of quality, so I can have finally digitized them and get rid of those old tapes.

  I appreciate any help on this matter.

  

  FCP X requires timecode.

  Most of the cameras Hi - 8mm and 8mm had no time, writing code on the tape.

  Try Quicktime x to capture your video footage.

  If you have QuickTime 7 Pro, it would be even better option than QT X for the capture.

  Al

• Ports Firewire and PCI Express slot not already busy

  Hello

  I have a Panasonic Mini DV camcorder that has a firewire port (it also has an A / V jack on the front).

  I recently bought a p6623w

  http://support.HP.com/us-en/document/c02479685

  http://support.HP.com/us-en/document/c02560084

  Because this computer includes ports, Firewire and PCI Express slot has been recently filled by a video card, what are my options if I can connect the camcorder to my computer? I have to go the A / V jack route?

  Thank you.

  Do you still have one of the three slots PCI Expressx1 open?

  http://www.Newegg.com/product/product.aspx?item=N82E16815124092&cm_re=firewire_card-_-15-124-092-_-product

  http://www.newegg.com/Product/ImageGallery.aspx?CurImage=15-124-092-TS&SpinSet=15-124-092-RS&ISList=15-124-092-Z01%2c15-124-092-Z02%2c15-124-092-Z03%2c15-124-092-Z04%2c15-124-092-Z05&S7ImageFlag=1&Item=N82E16815124092&Depa=0&WaterMark=1&Description=SYBA%20Add-On%20Card%20Model%20SY-PEX30014

• FireWire and intensity Shuttle Pro

  Here are my computer:

  http://support.HP.com/us-en/document/c03135882

  I was wondering if I can install together or one at a time, a Firewire and Pro intensity inside my computer?

  The Firewire and the Pro will be compatible and work for my computer?

  In addition, what is the best Firewire hardware that is compatible with my computer? Please provide links to where I can buy equipment to Firewire. Thank you!

  Here are some additional links:

  FireWire (formally IEEE 1394): http://en.wikipedia.org/wiki/IEEE_1394

  Intensity features (look for the intensity Pro): http://www.blackmagicdesign.com/products/intensity

  The answer that I received on the PCI-E x 1 slots is that slots do actually share the bandwidth.  The chipset plays the role of the traffic COP to ensure that sufficient bandwidth is received by each slot properly.  In your case, the map does probably not in the motherboard.

• SL500, Windows 7: Problems with the interface audio external Firewire and Digitus USB KVM switch

  Hello

  I have an audio interface, Presonus Firestudio Project, which connects via Firewire to my Lenovo SL500. On the Sl500 is Windows 7 x 86 installed. I have also 2 rudders (Akai APC20 and M-Audio UC33e), 1 Midi Interface and a kvm switch connected via USB.

  Almost everytime I make music with Cubase or Ableton Live I get holes in my audio stream. Audio playback stops just freezes for 1-10 seconds and the surface of my DAW. This becomes especially annoying when I record.

  Recently, I have disabled all devices in the BIOS except for Firewire and USB, but I am always running into the same problem. Then I got a look at the system information for Windows 7 and the saw - problems/sharing section - USB and Firewire to share the same IRQ. I'm almost certain that this is the problem causing the audio gaps.

  Is there a way to chanmge in Lenovo Sl500 BIOS IRQ settings?

  Best regards

  belochim

  After Plug and install a USB audio interface that I borrowed from a friend, I noticed that whenever I changed my KVM switch to the surface of the other PC Ableton froze for a second. The audio stream on the other hand kept and just as it was supposed to.

  The KVM switch is a "Digitus Pocket 2-port USB KVM switch" model No. "DS-11402-1".» This KVM switch seem to be a kind of diffusion in the USB bus which then interrupts the audio stream running on Firewire.

• Is it possible to watch video remotely using an ipad and the Camcorder HDR-CX330 wireless?

  Is it possible to watch video remotely using an ipad and the Camcorder HDR-CX330 wireless? I could see the pictures, but really want to see videos?  I use the PlayMemories application for remote control. Any suggestions?

  Hi bill54107,

  Welcome to the community of Sony!

  Unfortunately, you can not view videos recorded wireless using your mobile device. You can transfer videos on your iPad, but only if they are saved in the format. Mp4 format AVCHD files can be transferred wireless to a tablet or a smartphone. Enable the video double setting Rec to shoot AVCHD and Mp4 format at the same time.

  You can only use the transfer of photos and AVCHD videos wireless when you download Wireless Auto Import (for Mac) and the House of PlayMemories.

  If my post answered your question, please mark it as "accept as a Solution. Thanks_Mitch

• Equium P300-16 t Firewire and Canon MV530I camcorder

  I have been informed by the barrel that my Canon MV530I is not compatible with Windows Vista (Home Premium) and video transfer, I need to use firewire, but they have not responded to my request for more information. I was wondering if the camera requires a firewire installled driver,

  I bought a 4 pin 4-pin IEEE1394 firewire cable lead taken - ilink (I assumed this is the right cable to use) and I put the camera to AV - DV out but when I connect the camcorder to my laptop it is not detected. I tried Windows Movie Maker and Arcsoft Showbiz DVD2 but neither sees the camcorder.

  I checked in Device Manager and the IEEE 1394 compatible OHCI host controller is reported as working properly and has the latest version of the driver.

  I have a video capture device SNAPSHOT of EZCAP USB 2.0 on order so that I can transfer my VCR VHS tape and I wonder if the connection of the camcorder AV out who would work as a last resort, although I prefer firewire.

  Can someone help me solve this problem?

  Thank you

  Hello Ivatt

  It's quite complicated. Laptop manufacturer is responsible for a lot of ports to work on the book and must guarantee that the ports work in accordance with the defined specifications.
  You use external peripheral part and want to use one of the ports on the laptop.

  In your case, the device is not recognized. So now, the question is where is the right address for help and support. Canon has better experiences with own products and probably they tested clean products, how to be recognized on the most used operating systems. My personal opinion is that the Canon should help you with this and offer good drivers if necessary.

  For example, I have an old Sony camcorder and when I connect it to the use of Windows XP Home, Vista or Win7 cam firewire cable edition is recognized immediately and I can transfer the material recorded on the HARD disk or use it for live recording on HDD and create different video files.

  It seems that the drivers for various multimedia devices of Sony are already included in Microsoft operating systems and devices will be recognized automatically. It is the same with my digital cam DSC-W200.

  Try to contact Canon again. they must have a solution for this problem.

• FireWire devices are most recognized. External hard drive and the camcorder will not connect.

  My computer no longer recognizes the firewire devices that I connect to it.  The Device Manager shows the driver 1394 work very well.  I even deleted and reinstalled Windows XP.  My external hard drive so my camcorder are more recognized when I plug them cold or hot plug.  Two of them have worked very well for more than 4 years and now for some unknown reason, that they stopped just recognized.

  How can I get Windows XP to see again them?   I've tried everything.

  Hello Stevec5375.

  See the link below.  There is a fix for those running XP with multiple Firewire devices, thus causing a problem.

  http://support.Microsoft.com/kb/830987/en-us

  Please let us know if it did or did not help to solve your problem.

  See you soon

• Pavilion G5470SC Firewire and Win 7 compatibility?

  Hello, I am the proud owner of a Win7 64 bit desktop G5470SC kit, works very well, but as I will do a little bit with Pinnacle Studio to transfer some old movies my Panasonic GS120 camcorder (ca 2004) DV - I need a firewire adapter. This computer model doesn't have one as standard.

  A Firewire/IEEE card is cheap here in Sweden, ca 20 USD, BUT I understand that this computer only has positions available housing for what is called PCI Express cards? I am considering buying the cards have standard PCI, not express. Did someone knows the difference and I can get a PCI card into a slot Express?  If this isn't the case, I'd appreciate some advice on compatible PCI Express FireWire cards that can work with the computer under Win 7 x 64.

  Best regards

  Olof

  Cards like these according to Newegg.com should give you a good start. Of course, you will need to find a local retailer or online source.

  Frank

• FireWire and does not recognize external drive.

  I am running a Macbook Pro 10.7.5 2010. Recently my firewire port started reading randomly my WD external hard drive. When I plug it in, the light comes on to show it is powered, but no other Exchange of information is performed. It does not appear in the Finder or disk utility. While he will reveal sometimes without reason. Any ideas?

  It could be the port, the cable or the housing.  Test all three possibilities.

  As a matter of procedure, reset the SMC and the NVRAM:

  https://support.Apple.com/en-us/HT201295

  https://support.Apple.com/en-us/HT204063

  Ciao.

• How can I recover data when the firewire and USB ports do not work?

  My MacBook Pro has been flooded by water, and no ports work. Anyone know how I can get information on the new system or hard drive and my computer?   The cost of repairs to the machine is $ 800, so I'm going to buy a new.

  Remove the hard drive in an external enclosure supporting USB or Firewire. Connect to another computer to retrieve your data. This requires that the player was not damaged.

• FireWire and USB connectors

  I have PC HP Pavilion Elite e9300z equipped of a 1394 connector. Anyone know if it's a 1394 or 1394b (Firewire 400 or 800) compatible?

  If I want to add a USB 3.0 card, where should I use and what type of power connector would be used with this PC - Molex or SATA?

  Thank you very much.

  I have not found a decent picture of food on the HP site, but I found this site that has the power of HP original adduction (part 5188-2859) for this device.

  Food seems to molex and SATA power connectors, so it really depends on what is available in the system.  SATA is more recent, but either we could work as a long time that what you add support.  Just in case you don't know, white connectors are molex and the black connectors are connectors to SATA power.

  The motherboard should look like this once it is open.

  

  The three short PCI express x 1 slots is the crack you up when you add an extension like a USB card.

  It seems that the firewire port is 1394 a.

  Here are the full specifications of the motherboard if you need.

  http://support.HP.com/us-en/document/c01925486

• First items 14 and SONY camcorder

  Hello

  First elements 14 8 64 bis Windows does not recognize my SONY FDR AX53 and its memory card files en containing MP4

  Why?

  Thanks in advance

  Statement of your camcorder to your computer via USB, it is on VTR and you have established a connection between your camcorder and your computer? (If so, you will be able to see the camcorder in Windows Explorer.)

  Once you have done so, have you used add files / cameras and devices to start the importing video to locate your files?

  Please share all of the details as you can about your process.

• FireWire and Tecra S1

  Hi, can someone tell me if it is possible to use the FireWire port on a docking station, although the S1 is not a fireWire port?

  Hello

  It is not possible because the docking station is not a manufacturer of signal. Only the ports you have on the unit can be used on the port replicator.

  The function of PR is just to loop through all the signals available.

  Good bye

• FireWire and expresscard

  Is anyway that I can transfer my videos from cam Sony (which uses miniDV) for HP dv6-1355dx who doesn't seem to have i.link/firewire port? Is it possible to add the i.link port? ExpressCard works for my laptop? Thanks in advance

  Hello

  If your machine has an ExpressCard slot, you can use adapter ExpressCard-Firewired, something like one of them (I tested this connectivity):

  https://www.Google.com.au/search?q=ExpressCard+FireWire+card & hl = in & rlz = 1G1GGLQ_ENAU282 & source = univ & tbm = shop & tbo = u & her = X & ei = pg4zUcbcL6PoiAfI3YCQCQ & ved = 0CFUQsxg & biw = 1920 & bih = 976

  ortherwise, you can use USB - Firewire adapter as one of them:

  http://www.techbuy.com.au/searchcat/USB_ADAPTORS/CONVERTERS.asp

  Kind regards.