First issue of installation

Similar Questions

• Acrobat 8 or 9 with Windows 7 64 bit - printing issue: new installation, upgrade to Vista.

  Acrobat does not print using the PDF Converter.  I can print a PDF file on a conventional printer (not), but when you use printing > Adobe PDF as the printer selected, nothing happens. As a result, cannot make PDFs of web pages etc.  There is a problem reported by the AdobePDF.dll_64, during the installation.  I downloaded that separately and reached a complete reinstallation of 8 from Adobe, which previously worked perfectly on Vista.

  Try this first: http://www.sevenforums.com/software/2092-adobe-cs4-under-7-x64-pdf-printer.html

  Error "the file AdobePDF.dll is needed..." "When you install Creative Suite 3 on 64-bit (Windows 7 64-bit) Windows Solution

  Manually extract the 'adobepdf.dll_64 ' of the file data1.cab file before installing Acrobat. When the prompt appears, navigate to this file and select it.

  1. Navigate to the folder that contains the file setup.exe to your installation of Acrobat 8.
  2. Locate the file "data1.cab" and open it (this may require a third-party compression utility, such as WinZip).
  3. Inside the content list, locate the file "adobepdf.dll_64" and copy it to your desktop.
  4. Run the program setup.exe installation and when the prompt appears, select Browse and select the file that you copied to the desktop.
     Note: If the file cannot be selected, change the file type drown down in the dialog box to "All files", or rename the file "adobepdf.dll" by removing "_64" from the end of the file extension.

  http://kb2.Adobe.com/CPS/401/kb401731.html

  More information

  Because the Adobe PDF printer is not supported on 64-bit operating systems, version 64 bits of the AdobePDF.dll does not get extracted during installation. So, the installation program is unable to locate him. Although Acrobat is installed, the Adobe PDF printer will not install. Following the update procedure above will address the issue.

  333360 : support policy for Adobe Acrobat (8.0.x Windows x 64)
  333780 : support policy for Acrobat 7 and 8 on Windows Vista

  Questions about installing Windows 7? Read this:
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• First Elements 8 Installation optimization?

  After a few years of use Adobe Elements '3', I decided to switch to '8' and I'm willing to install it now. I read a lot of information on the forums on various improvements and have learned much about the causes of my frustrations over the years.

  I'm also just starting to use (learn) photoshop CS2 (Yes... behind a little). I used some other photo editing programs and has recently decided to try Photoshop since I bought sometimes back.

  I will install on a machine that I dedicated exclusively to media and production editing. I wanted to have the opinion of experts from there to ensure that my installation is optimized before you start. Here are the specs of the system for the machine I want to use:

  Led Precision 690 Dual Core Xeon 5150 proc, 4 GB of SDRAM DDR2 memory at 667 MHz, nVidia Quadro FX 4500, 512 MB dual VGA or DVI graphics.

  Two hard drives, c: 250 GB SATA 3.0 Gb/s 7200 RPM w/8 MB DataBurst Cache and d: 500 GB SATA 3.0 Gb/s, 7200 RPM w/16 MB DataBurst Cache.

  C1 - All hard drives no RAID for 1 or 2 hard drives SATA. The operating system is Windows XP Pro - Serv. PK 2

  Currently the C: drive has 120 GB of space used and is has a few programs and a library of great music. D: drive is virtually empty with only 394 MB used.

  Currently my virtual memory settings are: size of the file C: 2046-4092 D: has nothing put? I'm not sure whether or not should?

  My goal would be to use what I have (hardware and software wise) currently and optimize the settings and installation for reliability and speed (if these two words can be used in the same sentence). What I can do before installing which could help overall I want to do now. Here are some of my questions:

  1. Should I install a first Elements 8 on the drive "C" or "D"?
  2. I all catches recorded and made made on the disk "D", because it is basically empty?
  3. From what I've read, the virtual for my system should be set at a maximum of 9092. Based on the 2 to 2.5 times the 4 GB of Ram. Is this correct?
  4. I leave the ' set the initial size to 2046.
  5. I should only ajdust these when I use this program and set them back in the case, or should I adjust them at the beginning and let them?
  6. I noticed that there is already an update for '8 '. I should download immediately or only if there is a problem?
  7. I install Photoshop CS2 on this machine at the same time. Y at - it no recommendation as to which one should be installed first?

  Any comments will be greatly appreciated. I'm ready to be installed with both programs in a box sitting in front of me. I've removed all versions earlier and all cleaned up, it is all nice and sweet.

  Thank you

  mharris56

  Overall, you seem to be in good shape. While you certainly want to XP to SP3 and access to Windows Update/Custom to ensure that you have even the non-critical updates. Also, make sure you have the latest version of Quicktime.

  1. Yes, you MUST install Premiere Elements on your C drive.

  2. use your D drive to store your project files and media. In fact, I recommend that, for each project, you open a new folder on the D drive to your project file. This is, among other things, keep your zero and make files in a place it need so that, when the time comes to remove the project from your computer, you can erase all files associated with the project while deleting the folder.

  Also check that your drive D is formatted NTFS and FAT32 not.

  As for the rest of your questions:

  I let the system set up virtual memory. There is no reason to put it manually on XP.

  You should have no problem installing both Photohsop CS2 and elements on the same computer programs.

  Finally, please refer to the right of this forum. The first several address issues and updates for first Elements 8.

• Police shows only correctly on the first run after installation

  I have a really weird problem where my custom font is displayed correctly on the first run of my application after installation in the Simulator or device. Subsequent executions of the application, display the fields with the default system font.

  The service I use is this:

  public static Font GetCustomFont(boolean bold, int size)
  {
      Font myFont = null;
  
      if (FontManager.getInstance().load("customfont.ttf", "custom", FontManager.APPLICATION_FONT) ==FontManager.SUCCESS)
      {
          try
          {
              FontFamily typeface = FontFamily.forName("custom");
              if (bold) myFont = typeface.getFont(Font.BOLD, size);
              else myFont = typeface.getFont(Font.ITALIC, size);
          }
          catch (Exception e)
          { e.printStackTrace(); }
      }
      return myFont;
  }
  

  and the font is used as follows:

  LabelField myLabel = new LabelField("TESTING CUSTOM FONT");
  myLabel.setFont(GetCustomFont(false, 24));
  add(myLabel);
  

  The police show up nicely the first time I run the application. Even though I call System.exit (0), then restart the application, it is up to the top with the system font. My policy is a TTF 46KO file, which is added to the res folder of my project and I develop for BB 7.0.0.

  Can someone please help?

  You should check the return code of

  FontManager.getInstance () .load (...)

  You agree that SUCCESS, I think that you will find in the following executions that return code is something like 'Already loaded' and so you can use it in this circumstance too.

• First Elements 14 Installer fails to initialize

  So, I bought Photoshop elements 14 and first 14 elements in a store with the DVD, installed items without a problem.  I am trying to install the first 14 and get the error "Setup is unable to initialize.  I do not pay extra for this program just so that I can not install it.  I tried to install the DVD or download the program and I get the error so be it.  Help, please!  And no, I don't have the preview versions installed on my laptop.  I'm on Windows 8 if that helps.

  Candy

  start at the top and work your way down to apply applicable patches until your problem is solved.

  If (win) cc: https://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html

  If your error is:

  "Setup failed to initialize. File not found. ' or 'could not initialize installation. This could be due to missing files.

  first of all, rename folder OOBE OOBE.old.

  to find the OOBE:

  Win 64 bit OS: Program Files x86\Common Files\Adobe\OOBE

  Win 32 bit OS: Program Files \Common Files\Adobe\OOBE

  Mac os: HD > library > application support of > adobe > caps

  Mac os: USER > library > application support of > adobe > OOB

  If it fails or isn't the exact error you see, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.

  If you use an installation dvd:

  Copy the contents of the drive in a desktop folder and install from this directory.

  If you are using a mac:

  1. try to create a new user account in Mac with administrator privileges.

  2. connect to the new user, navigate to Mac HD > Application > utilities > Adobe Installer folder, locate products such as Adobe Reader, Adobe Flash, Adobe Air and uninstall the

  3. navigate to the user library > Application Support > Adobe and Adobe put in the trash.

  4. navigate to Mac HD > library > Application Support > Adobe and Adobe put in the trash.

  5 restart the installation.

  If everything is applicable above fails, check your Setup logs:

  http://helpx.Adobe.com/Photoshop-elements/KB/troubleshoot-install-using-logs-elements.html

• First Pro CC installation does not complete

  I try to install the first cc pro, but it won't, it stops just at 43%? someone help me? What should I do?

  Empty your tmp (win) or the temp (mac) folder.

  If the installation crashes again, check your task (win) Manager or the activity monitor (mac) and put an end to a hanging adobe help the process.

• First Elements 13 - Installer fail to initialize

  Hello

  I get an error "The Installer failed initialize", when trying to install the first 13 items.

  OS: Windows 8.1

  I tried the below, but did not the program on the list to uninstall when I get to the list of Control Panel programs.

  Please check the help below document:

  Error "Setup could not initialize". Install desktop application | Windows

  
  

  ANY advice would be really appreciated.

  Thank you

  O'Briain
  

  O'Briain you indicated that you had no other Adobe Creative previously installed software.  If this is the case there should be no previous installation of Adobe Application Manager.  Please use the Control Panel programs and features to ensure that all Adobe Creative Software are removed.

  You will then want to use the available CC cleaning tool to use CC Cleaner tool to resolve installation problems. CC, CS3 - CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html to ensure that all entries have been deleted.

• First elements 11 installation failure with the error on the shared technologies

  BEFORE the 11 installation with error failure "the installation process has encountered an error during the installation of the shared technologies. If please restart your system and try again"what is is to uninstall everything and I have to restart with the same error and we continue. So far the only way it works is to point the "error message" I run Task Manager and stop the installation program, I know it leaves the files that must be removed by the installer, but it worked. This information was acquired on one of the forums and it seems to work. Yesterday, it was the first time that I really used it fully, and even if I was able to create a project, I can't go out as a file (mi/gal), it starts out ok then throws an error and fails. As PREVIOUS 10 was still installed I imported the project (which surprised me) in PREVIOUS 10 and output as needed without error. This may be due to something being improperly installed or not installed in the PRE 11, I don't know. Can anyone help
  

  Dennis

  using Windows 8 Pro

  PS I downloaded the Adobe Support Advisor and no error
  

  See the following help document:

  http://helpx.Adobe.com/Photoshop-elements/KB/troubleshoot-installation-Photoshop-elements-premiere.html

• First elements 11 'installation Shared Technologies' error during installation

  How can I fix "the installation process has encountered an error whil installation Shared technology.  Restart your system and try again. "error installing first elements 11?  Photoshop elements 11 installed fine, but I'm getting this error when trying to install Prime Minister 11 elements.

  I have already tried:

  Install from CD

  Installation of the root of the c:

  Installation of the trial version of Adobe Web site

  Install from CD, after the clean boot

  In each case, he moved to the same place with the same error.

  The research of these forums and doing a web search it seems like a common problem with no clear solution.

  You're right: I can't organizer of items of work from the Photoshop Elements welcome screen or the menu of Premiere Elements.  It must be something that equipping humble by the Setup program does not finish entirely, or another bug.

  I was able to get organizing items goes into the programs directory and click the .exe directly - C:\Program Files (x 86) \Adobe\Elements 11 Organizer\PhotoshopElementsOrganizer.exe

  I did a search in the registry for the organizer and found that, for this program, the "open" command is the link above - C:\Program Files (x 86) \Adobe\Elements 11 Organizer\PhotoshopElementsOrganizer.exe

  "" However, the 'start' command is \"C:\Program files (x 86) \Adobe\Elements 11 Organizer\PseProxy.exe\" \"%1\ - v".

  When I click directly on PseProxy.exe in the path above, nothng happens.

  Under section Photoshop Elements under "start" line is different - slightlly "C:\Program Files (x 86) \Adobe\Elements 11 Organizer\PseProxy.exe '-v '%1 '.

  I don't know enough about the registry commands to know if this is normal or not - just realised that they were different.

  I don't have the time to play with it and won't take the risk of messing things up.  I probably do not use the Organizer a lot anyway.  I was wondering what other features I find missing.

  The search for these forums, it seems that this error lasts for a few generations of product and is unusual.  I hope that Adobe puts some resources and efforts to fix this bug.

• First Elements 10 installation on Machine 64-bit Windows 7

  In the month of August, I bought the first 10 Elements (and PES 10 also) and install them on my existing Vista 32 bit computer.

  As of today, I replaced this computer with a much higher spec computer Windows 7 64 bit.  However, when I try to install PRE10 on the new computer, I am greeted with the error message that the installer does not support a 64 bit OS.  I install disc, I should load disk 2 if I should download the 64-bit version.

  I bought the download version and cannot find anywhere on the Adobe site to replace my 32-bit version with a 64-bit - but the reference to the 'disc 2' implies that my purchase either should have understood.

  Someone at - it ideas?  I wouldn't replace a piece of software only 3 months and a half old.

  FYI, the installed PSE10 first try without any problem.

  Thanks in advance,

  Bob

  Edited to add: just installed my copy of hearing CS6 as well without any problems - it seems only PRE10 which comes with an installer that does not work in 64-bit.

  Download the 64-bit PRE10 of Tools ProDesign

  

  See you soon,.
  --
  Neale
  Insanity is hereditary, get you your children

• with Photoshop Elements 10 and first Elements 10 installation problem

  I bought a package Photoshop Elements 10 and first Elements 10.  It comes with 5 disks... When I install the first disc, it does not ask for the 2nd drive once the first drive is completed.  When one has been done hit the option of finishing and I did and that's all.  He did not make the next disc.  What should I do?

  Thank you

  Jim

  Hello

  Disc 1 contains the installer for 32-bit Windows.

  Disc 2 contains the installer for Windows 7 64-bit.

  Disc 3 contains the installer for mac OS.

  Disc 4 is the content of the disc for Windows Adobe Premiere Elements.

  Disc 5 is the content of the disc Adobe Premiere Elements for Mac OS.

  You can install from Disc1, 2 or 3 depending on the operating system running on your computer.

  Thank you

• Service Pack 3 - issues after installation fails

  Hello

  Today, I tried to install the Microsoft Office Suite Service Pack 3 (SP3) - and unfortunately, it doesn't work, it says that the process "failed." Now, after I restarted the PC and started the update of Windows, he said again there is an important update waiting to be installed, but it does not show it so that I can't try to do it again. He had a warning when loading the update for the first time, that there was not enough space on my PC, could this be the cause? But if that were the case, I've solved - but how do I now 'get' the important update?

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  What is the update, you are referring? http://www.Microsoft.com/download/en/details.aspx?ID=27838

• Restore my laptop when it was first issued by the manufacturer...

  Hi, I was wondering if someone could explain how to restore my entire notebook to the State wherever it was when I got all first it? I have already backed up my files, but I don't know what to do next! Thank you!!

  Is what brand? Here are the instructions for a dell
  http://www.ehow.com/how_2134715_dell-Windows-Vista-factory-settings.html
   
  --
  ..
  --
  "ericad2010" wrote in message news: dd89fa3b-ddca-442d-8e44-df0bc6a1464a...
  > Hi, I was wondering if someone could explain how to go about
  > restore my entire notebook in the State where it was when I received
  > It? I have already backed up my files, but I don't know what to do next!
  > Thank you!
  >
   
   

• Issues of Installation of Windows 7

  I bought a laptop 'broken' off eBay as a fun project to see if I could make it work and a fun project. I was wondering how win7 space resumes and also know if a semiconductor CompactFlash card would also work faster than an SSD. Also, classic iPod uses hard disks of Zif/Lif, right?

  Windows 7 uses 10 GB of disk space, but requires 16 to 20 GB to facilitate installation.

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

• Window Home Premium product issue previous installation of ultimate

  After a year, my gateway Win 7 Home Premium computer, crashed all the Seagate hard drive hardware failure. Gateway did not provide a disk Win 7 so I downloaded the iso file from Microsoft and rebuilt a new hard drive.

  Oops, I downloaded iso ultimate and so my product code would not work. Then return to Microsoft and downloaded the right image and did a clean install. I signed up the operating system and registration has been accepted.

  Problem: I am now raise the pop I have the wrong product code for Windows 7 Home Premium, even if I registered the correct code and he was admitted.

  I think that there may be something remains of the previous erroneous installation, maybe in windows.old

  How can I fix it?

  Should I remove all references to Ultimate in regedit? delete windows.old?

  any help would be appreciated. Thank you

  Try the phone activation:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  also:

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012