Flash 8 will not start

Similar Questions

• Cursor / C850-1NU flashing Satellite will not start

  Hello

  I did something really stupid!

  Recently, I installed ubuntu on my toshiba laptop. In a game where he was downloading things, I turned off my cell phone because I thought it was frozen. I turned it back, but all he has a black screen with a white blinking "_". I put in an old Windows XP disc to see if I could install it but still nothing happened.

  And the laptop is installed with Windows 8 x 64 if that helps.

  I have to buy a new BIOS chip, or what?

  Hello

  In my opinion some OS install fails has nothing to do with the BIOS and after restart, you should see Toshiba welcome screen at least.
  >... but he did a black screen with a white blinking "_".
  See Toshiba welcome screen until you see Flash _?

  You have created a recovery (DVD or USB) media? If Yes please try to start installation of recovery image. Start Notepad, and then press F12.
  Can you see menu boot with bootable devices listed?

• HP P6280 desktop will not start

  Hardware: HP Desktop, 2.5 Ghz/6 GB RAM 6280

  Software: Windows 7 Home Premium

  Symptom: Slider, upper left corner flashing. Will not start windows. Does not start the system recovery

  Tests: will start at diagnosis; all components are

  Visual: all current fans running, hard drive access light blinks.

  Tried:

  1. how to remove the card reader and re - start with a statement found here. No change

  2. removed the hard drive and connected to another computer via the USB interface. The road climbs and all the folders/files are present

  3. re-installed the hard drive and the boot order changed to search first of hard drive. Still no change.

  Question: Do you think a FIXBOOT is possible hard disk using a different computer with the hard drive via the USB interface?

  Any other suggestions would be appreciated.

  Hello

  Please use the following link

  http://h30434.www3.HP.com/T5/desktop-operating-systems-e-g-Windows-8-software-recovery/black-screen-w-blinking-cursor/TD-p/1330837

• Computers button just flashes and the computer will not start

  Computer on button just flashes continually and the computer will not start.  I unplugged everything and put it back together.  Same thing.  Nothing.  Monitor is on, but nothing on the screen, of course, because the computer does not start at the top.

  Computer on button just flashes continually and the computer will not start.  I unplugged everything and put it back together.  Same thing.  Nothing.  Monitor is on, but nothing on the screen, of course, because the computer does not start at the top.

  Hey Bowers

  you get a splash screen on startup with an acer for hp dell etc. or the logo of the motherboard

  otherwise, it would seem that you have a hardware problem

  Contact the manufacturer of the computer or a local reputable computer repair workshop

  Walter, the time zone traveller

• Flash Builder on Mac 4.6 will not start

  I was working in flash builder and a java update poped upward and I installed it and now my flash builder does not start

  OK I solved it

  I had to uninstall ALL my adobe products and then use this http://www.adobe.com/support/contact/cscleanertool.html

  My new java update then reinstall my collection Adobe once again!

  But now it works how it should

• G5 will not start. LED light on. Fans before working.

  Early 2005 G5. running 10.5.8.

  G5 will not start. LED light (no flashes not but solid). Fans before working. Rear fans blowing not. Cleaned up the dust. A exploded during a down and will not restart. Any thoughts? Is that a bad diet? What I would do. Thanks for any help. I love this old computer and hope to keep fixed and working.

  Sam

  Some of the fundamental things include the pram/clock battery replacement

  since they may be dead; then with a power failure, sometimes the Mac

  do not restart. Usual power management unit & reset NVRAM/PRAM are

  methods that sometimes also used as a troubleshooting measure.

  • Reset the Mac chip power management: (see SMU)

  http://www.thexlab.com/FAQs/resetpmchip.html

  • How to reset NVRAM-LANDAU on your Mac - Apple Support

  A hard reset can sometimes be used, where the power is disconnected

  the logic board and power removed from grill; Then push the Start button / stop.

  (But maybe not. Several PowerMac computers, I had, some people found this helpful)

  You may also remove and reposition cards and other items

  the inside of the case, to be sure they are connected properly. Be sure to not

  In short anything, due to the static load or residual power in the circuits.

  The hour is late here, so I'm not going offline; If all goes well a battery original or novel, etc.

  can help to put it on again. Also sometimes the power supply has some faulty fans,

  circuits or capacitors, so they can be troublesome to repair or replace.

  Good luck in this case!

• Satellite A500 will not start

  I have an A500 on 12 months old that will not start.

  The battery light shows white and power on AC light is on as well.
  When button "power on" is pressed and released the laptop IT flashes briefly then the battery lights up orange briefly and the light goes out.

  Battery has been divested of the case and it was completely discharged and it still will not with or without the battery. He has been connected to a different power of toshiba with the same results.

  The difficulty feeding saw two days ago. After that about 10 minutes to load then turned on.

  I saw a post where the guy was acquitted of the internal cmos memory and he ends up - which would have something to do with it?

  Any clues anyone?

  Hello

  I think that it s something wrong with the motherboard or a part of the motherboard.
  The point is this laptop should turns on even if the battery is empty and the power adapter is plugged so maybe it s something wrong with the memory supply or electronic power on the motherboard.

  I recommend you check the parts of memory first. Remove a module and try to start the device using that one module.

  Of course this can not help you too... so in this case, it could be a severe motherboard issue...

• Nine NB100 will not start

  Hello

  I just bought a Netbook NB100.
  After unpacking, I tried to turn it on, but it will not start

  When I put the charger in it gives a rattling sound very rapid for a few seconds and then stops, and also the sign of the battery flashes for 5 seconds and then turns off.
  When I press the button start nothing happens.

  Any help appreciated. So was lookiing forward to this

  Thank you

  Hello

  Remove the battery, connect the AC adapter and try to turn it ON.
  I didn't understand exactly what happened. But I hope you didn t turn it on for the first time without adapter.
  It is logical that the laptop must be put in power supply and after short time you can run it for the first time.

• Re: Satellite L300-1AS will not start

  Hi all

  Now my L300 will not start not (windows (Vista).
  It shows a blue screen saying that windows has been shut down and to check the installation of new hardware or software.
  There is no new hardware or software. He suggested to disable the bios memory options (I don't know how to do this) and suggests to start in safe mode to remove or disable components.

  The laptop does NOT start in any mode not to mention safe mode, repair mode that brings back me to the blue screen as described.
  I bought a Toshiba Recovery disk (a single disc happened?) that begins its process then two locks of "select a language to move forward" or detects an error and request I have "press any key to continue' what I'm doing, it then displays X:\windows\system32 > with the cursor flashing at the end of > and does nothing more , its been like that for 5 hours now... I'm supposed to type something in or I am looking at a new hard drive?

  Suggestions for a greatly appreciated numpty (outside to let computers alone numpty you of course!)

  Thanks

  Colin

  Hello

  Yes, the recovery disc's one disc it s DVD ;)

  Return to be issued;
  I think that it s material related since the recovery disk should work for sure.
  The blinking cursor can be related to a faulty memory or HARD drive.
  Both should be checked.

  You could remove a memory module and might try to power the device using a single memory module in a slot.
  Of course, the best would be a use of two new modules

  The HARD drive can be checked using a tool called Drive Fitness Test (it of free use google to find it)

• Equium L10 will not start

  Please help - my Equium L10 will not start.

  Power supply is OK. When the power is connected the orange battery light comes on. I press the power button the green power light turns on momentarily (literally a Flash), then both the Green and orange lights out with orange alone returning it on about 2 seconds later.

  Else does nothing - no fan activity, no hard disk, no activity of the screen activity, no other light - you get the picture!

  I tried the following:
  Removed battery and tried to start with AC power not only - no joy
  Removed AC power and I tried booting with battery only - no joy
  Barrette of RAM removed and reinstall - no joy

  Does anyone have ideas before considering a tech? Suggestions (with the exception where to paste!) would be welcome.

  Kind regards

  Gary C

  Hmm .He doesn't sound good. For me, it looks like a motherboard problem. It is maybe something wrong with electronic power to the Board of Directors of s. But not for sure.

  What you can do is to remove the battery and unplug the power adapter for a while.
  Wait about 20 minutes and connect the battery and adapter for the laptop. Then try turning on the laptop computer.
  If this does not help I recommend contact the ASP technician, because I don t think you will be able to know what's exactly wrong.

  So I hope that the technician can find the fault quickly and can solve this problem.

  Good luck

• Re: Satellite U300 will not start

  The machine has failed at a conference while using only the word and not on any network.

  Now the machine will not start orrepair and even the recovery disk will not work. He gets to the part where he asked for the language and then freezes on the next screen. I ran a disc hard diagnosis progam which reports no errors but I don't know enough about such things.

  The drive light flashed hard and I can hear the work of the reader, but nothing happens.

  Help, please

  Hello!

  It's strange, but in your case I would try to format the HARD drive before using the recovery disk.
  There, you can use the Microsoft Windows XP disk or another tool that allows you to format the HARD drive.

  If you have formatted the drive HARD try again with the Toshiba recovery disc.

  Good bye

• Update Windows xp caused my computer blue screen and now will not start.

  Update Windows xp caused my computer blue screen and now will not start.  There has been no change to my system hardware or software otherwise.  After that windows update Setup, he asked to restart the computer.  When restarted, the computer screens and past blue to the quick menu for safe mode and last known configuration to work.  None of these mode of work, not to shelter or otherwise.  The only thing that he will now implementing market is quickly flashing the blue screen and restart once again to this quick menu.

  It's really annoying because I have important files on this computer work and can't afford to get in shape!   I put my confidence in using windows and keep it updated.   During the installation of your updates, it made my system fails and does not restart.   I'll be very upset if this update of windows xp causes me to have to reformat and lose important files!

  Any advice on a solution?   I need to get this computer work as soon as POSSIBLE.

  Ben River

  I ordered the Dell XP disc and did the re-install. It works fine now. The Dell technical support had me do some updates on the web as well. I have not had problems since. What happened with the automatic updates completely wiped out my operating system. At least I don't have to buy a new computer.

  If nothing else works, try reinstalling your operating system. It worked for me.

• Pavilion ID46 g6 will not start

  Product: Pavillion g6 ID46

  [Edited by Moderator] Serial No.

  Product # A6Z74UA #ABA

  OP sys: Windows 7 Home Prem OA

  Pavillion G6 my husband will not start. What happened: returned to the computer after being away for a while, shook the wake up the mouse and the screen «has exploded in many colors and motion pixels» Screen went black, then a screen "do you want to start in safe mode" popped up. He tried a start-up without danger, but he failed and gave him a Bios Application error 501. He tried to restart the computer, but it crashes on the 'Starting Windows' screen with 4 color icon.

  I have:

  Removed the battery and tried to restart. Not good.

  Has taken the hard disk and and reinstalled it. Ditto.

  Tried to boot mode safe, before and after the following below. "Loading files" still stuck on Windows\System32\drivers\CLASSPNP. SYS

  Burned and ran a repair disc. Took 4 hours and the program ran at the end when I was asked to reboot. Computer hooked on "Starting Windows" screen. (I left this screen function for more than 5 hours without this change.)

  Ran the program System Repair twice, same results.

  Start of Tests ran. After self-test of the main hard drive, hard drive SMART and verification Test of memory system (passed 100%)

  Tried to restore the BIOS using Windows + B and power with several attempts. Button Power LED stays on, about 20 seconds later a small LED on the "caps lock" key flashes white twice. Black screen and nothing happens after 5 minutes. He raised his eyes and 2 flashes is supposed to be the corruption of the BIOS.

  Error log lists these: quick 03F0 303, 501 error and error of hard disk 1.

  I have a lot of intelligence of the computer, so appreciate any help you can give, especially if assistance is simple and easy to follow terms.

  Mahalo in advance!

  Well, nothing worked and I did not attempt to remove the HD and turn it on again. Husband returned to a comp sci student who managed to get some info on the HD, but said that the HD was shot.

  Good thing is that I got a new Asus laptop and put my old computer to my dear husband. So, I guess that the problem is solved!  Thanks for your help.

• "Error message: Verifing DMI pool Data data ', 'Boot from CD' and Vista will not start.

  Vista will not start. Yesterday I had a remote assist of a tech trade SPS who took several Java updates and installed the recommended Java version. Until I left work the day I closed my computer so that he could install the updates from Microsoft. After the updates were finished I he turned and left for the day. When I arrived this morning, I had was a black screen and 2 lines of text following: 'Verifing DMI pool data' and 'Boot from CD' and a cursor flashing beneath them. I downloaded and executed a Western Digital utility that showed no problems with the hard drive, put in on the installation disc repair service is no error. I did a system restore to a point since yesterday morning, and Vista still does not start. Any ideas or suggestions?

  Hi JohnHorky,

  Step 1:

  First check and make sure that all physical connections on the computer are correct.

  Step 2:

  Alternatively, you can try to run a Checkdisk and check.

  a. Insert the installation disc.

  b. restart your computer.

  c. click on the Start button, click the arrow next to the button lock and then click on restart. If you are prompted, press any key to start Windows from the installation disc.

  d. choose your language settings, and then click Next.

  e. in the System Recovery Options menu, click command prompt

  f. at a command prompt, type the following command and press ENTER

  Chkdsk /f /r X: (drive letter)

  Note: When you run the checkdisk, there are risks of data loss you can take a backup before starting the checkdisk.

  g. press y when you are prompted to check the drive the next time the system restarts.

  h. close all applications and restart the computer.

  Note: When you run the disk check, there are chances of losing data if you can take a backup before starting the checkdisk.

  Step 3:

  Check if the automatic hard drive in the BIOS (Basic Input/output System) is enabled and save settings and check if it works. If it doesn't, contact the manufacturer of the system for more support options.

  I also suggest that you install the latest update of the basic system of input/output (BIOS) on the computer by contacting the manufacturer of the computer and check if it helps.

  Important: Change to the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Hope this information is useful.

• Printer HP Photosmart will not start

  I am not necessarily in a hurry for an answer.

  I use a HP Photosmart 7260, S/N CN38Q2B0ZQ, Q3005A printer, model # SDGOA - 0372, with a Mac OS 10.5.8.  Printer blinking red and will not start.  There is no driver for the printer.  I had for a long time, never had a problem.  What should I do?

  Red flashing red in the light, I think that your machine has no status. If it flashes in the light of memory card, then there is an error with the memory card. Unfortunately, the machine is 7 years old and has lived a long life that printers are concerned. It would not be surprising if it has passed. This doesn't seem to be a hardware problem.