Folio 13 HP will not read 8 GB SDHC Windows 7

Similar Questions

• My dvd player will not read my disk of Windows 8 Pro upgrade

  Computer laptop Dell Vostro 1500 with XP Professional, my TSSTcorp L632H DVD player will not read my Windows 8 upgrade disk.

  It will read other DVDs. I've updated the firmware.

  The properties of the drive is display type as unknown file system CD player with blue disk image but used space and free space as 0.

  By using Device Manager, when I ask him to fill the volume is the disk CD 0, Type DVD, free media, not applicable Partition Style, capacity, space Unallocate status and placeholder show all 0.

  I also tried to use a separate USB TSSTcorp DVD drive and it will not also read the Windows8 disc.

  My desktop (Windows, 8, 1) DVD drive Asus computer reads the disc of Windows 8, but I can't use it to load Windows 8 on my laptop - or what I can?

  Can I connect my laptop to my desktop to upgrade laptop computer at Windows8 use of the desktop DVD player?

  I managed to copy the disc of Windows 8 on an external hard drive using another laptop that can play the DVD.

  Then I attached the external hard drive to my laptop and run Setup from there and installed Windows 8 to my old laptop to Windows XP...

  Thanks for your suggestion.

• USB port from a digital Multiport card will not read the external SSD drive. Right USB - c for the USB adapter works fine.

  USB port from a digital Multiport card will not read the external SSD drive. Right USB - c for the USB adapter works fine.

  It's a new 12 '' MacBook

• Optical drive will not read anything else professional films

  So, I am owner of a 2012 MacBook Pro 13 ". The computer comes with Intel Core i7 processor and has the maximum of 8 GB of Ram. The problem is that the optical drive that is built into the computer will read nothing else done professionally movies. It can read disks of movies like the Lord of the rings and Wargames, to name a few, I tested, but it will not read any DVD-R disc or to a CD. I tried the CDs as Metallica music... And Justice for all after try in another computer and a radio and get good results when it just won't play on my Mac.

  I have had this problem in the past , but at the time the optical drive not read anything at all. This occurred in early December and I fixed it on 20 December. To solve the problem, I went to the Apple Store and they can Reset the P - RAM. The Apple guy he told me to make sure to disable every night. I did this because it's what I did in the past. After that, I was able to play any CD or DVD and burn them. I also tested it every two weeks by playing a DVD in there to check that it still works. But I discovered that it was broken again when tried to insert a DVD-R to burn things on it and the computer only it spun and then ejected it. I've known this current problem since around mid-April.

  I did some research on it and what I have read I believe that I must buy a cleaning disc and run it in my optical drive to clean the lens of the eye out, but I don't understand how I am able to read some disks and not others if that is the problem.

  Can I take it again in the Apple Store and get it looked like or should I buy a cleaning disc and run it through my optical drive, and then decide what to do next? I'm in no hurry to get this problem fixed because my guarantee does not expire until the end of July this year.

  I don't know why you want to put some words in BOLD and a few words in normal font. Frankly I find it a bit annoying when someone does something like that, but oh well... what you could do is to try a cleaning disc (the one with little brushes this topic) or a good breath of air compressed. In addition, some brands of DVD - R Virgin do not work as well as others. I found verbatim to be good, maybe maxell or Taiyo Yuden. Your mileage may vary...

  If this still does not work, feel free to zap the pram x 2-3) and do an smc reset. Shut down the computer, plug power adapter, hold down the left shift, control, option, and button works / stop for about 45 seconds, let go of all of them, then press the power button to restart. If none of this works, then by all means to make a genius bar appointment and bring it in to your local Apple store. Hey, if you have an extended warranty, might as well use it, right?

  Good luck

  JB

• Satellite L30: reader will not read CDs or DVDs

  In the evening, I was recently testing on various operating systems on my laptop and eventually decided to return to Windows Pro.
  It was working fine until a couple of days, but then the hard drive started making a rattling noise, like R/RW head stuck.

  Now it will not read CDs or DVDs, can someone please help and tell me if it's a failure of the software or hardware, and the best way to fix it?

  Hello

  The drive problems are not uncommon and may still occur.
  For the most part the purpose of calibration training does not work correctly.
  The objective must be calibrated in the correct position until the player will read or write to the media.
  This fault is not reperable and especially the drive needs to be replaced!

• Re: Satellite A210-12U: Mat * a DVD - RAM UJ-8505 will not read discs - error Code 39

  Hello.

  I've had my A210-12U for about five months now, and recently for the past few months I had some problems with the dvd player.

  The thing is that the player will not play all discs, the drive will detect that a disc has been inserted, but it will not read. It happened for about a month but its only recently I really know whats been wrong with it.

  The drive I currently use is a CARPET * A DVD - RAM UJ-8505 ATA

  I scanned the disk for problems with the support toshiba but utility that came with something so I decided to check the drivers.

  Windows Vista gave this Message: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  I uninstalled the drivers and drivers on there and installed new ones that I downloaded here on the toshiba site.

  What I really want to know is: is this a problem with the drivers? is it a case that the operating system does not detect the hardware? or is this a situation where I should have the disk fixed on its guarantee?

  was soon Dan

  Hello

  Don t worry buddy I put t think that it s a hardware problem. It looks like a corrupted registry entry and it should be solved easily

  Completely remove the Upperfilters and Lowerfilters from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  and restart the laptop

  See also this article from the Toshiba FAQ:
  http://APS2.toshiba-tro.de/KB0/TSB7801XL0000R01.htm

  and the Microsoft Knowledge base
  http://support.Microsoft.com/kb/314060/en-us

  Good bye

• Tecra M1 will not read any type of SD card

  Help!
  According to the title, my M1 will not read any type of SD card. I'm running the SP2 of XP reloaded from original floppies, and it is fully up-to-date with Windows Update.
  The little green light adjacent to the slot flashes briefly on the insertion of a card, but nothing happening for example no open option window and nothing visible in my computer.

  I downloaded the latest drivers and installed according to the directives of the readme.txt file and even thought to copy the SDDEVMGR.dll in the System32 folder.
  I obviously lack something, so any help or pointers are welcome.

  Thank you very much. Craig

  Hello

  Usually, books are not all sizes of SD card and so you should be sure that the used SD card is supported and compatible with the Tecra M1 card reader.

  But if you are using a compatible SD card the laptop should be able to read/write on the SD card.
  I try to remove the SD card in the Device Manager controller and remove the driver software malfunction. Restart the computer and install the latest drivers again.

  PS: A registry cleaning would be desirable. CCleaner is a great registry cleaning applications

• SD-R2312 will not read DVD or CD in Tecra 8100

  My DC - ROM drive (SD-C2302) died. I bought a second hand SD-R2312 indicating various Web sites should work. I installed the connector of the previous disc and put it in the Tecra.
  The Tecra struggled to recognize the drive but remove and reinsert the drive sets. Device Manager recognizes the drive SD-R2312 and reports that it works correctly.
  However, the drive will not read anything. It vibrates far and finally tells me that the disk is not formatted. I tried pressed CDs and DVDs and burn CDs and DVDs (all - R). These are all the discs that can be read on my other machine.
  So, please:
  What can I do to make it work (and where can I get the update of the drive/firmware/BIOS)
  or is this idea a waste of time, in which case, how will I know what CD drives are compatible with the 8100.
  Thanks for any information.

  Hello

  You can find updates on the Toshiba support page
  _eu http://eu.Computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=eu&ID=Support_Homepage

  But as you can not read any disc, I think that your drive is defective.

  Good bye

• Combo CDR/DVD SDR2102 drive will not read CDs or DVDs

  Hello

  I have a mobile Ergo Elite 4.
  The hard drive crashed and I bought a new one.
  I have loaded windows XP by using a boot disk but cannot get the Toshiba SDR2102 CDR/DVD combo drive to work. I had to load windows on via USB
  using a USB port.

  I can see the drive in windows Explorer, but it will not read the CD or DVD.
  I looked in the Device Manager, and it came with no warning mark.
  I tried deleteting, re-startup and he's back in the Device Manager.

  I'm trying to find a better driver, but it says that I use the best driver.
  I tried various Web sites using sand everywhere tells me that I do not need a driver for this drive.
  What I do, it seems as if the Combo driver is recognized but it will not be read whatever it is inserted, he said only: insert the disc.

  Does anyone know what I can try? or know where I can get drivers for it or software to test the drive?

  any help would be appreciated. :-(
  Some.

  Hello

  You n t need a special driver for the CD/DVD drive.
  CD/DVD players use the current Microsoft drivers already contained in the Windows operating system.

  In my opinion, you should first test different types of media. Please note that not all CD or DVD s are compatible. Distribute readers can't handle bad quality mediums.

  But we shouldn't t rule out a risk of hardware malfunction.
  Disk failure and you may wish to contact your dealer for a replacement.

• Satellite 2410-303 will not read the product recovery CD

  My satellite 2410-303 will not read my product recovery CD.
  When I turned off my pc with the drive in, I get messages saying that the disk is not formatted correctly.

  Hello

  It of weird, is your CD the other disc drive? Have you tried to read your cd of restoration with another computer? If the same error occurs on another computer system, then the cd is probably defective.

  Just a question: I guess you want to recover your machine, Don t you?

  See you soon

• Carpet * a DVD-RAM UJ-820 s will not read the cd rom cd-rom dvd

  OK, I read the other posts on these discs. Mine will play DVD movies and play them. It will not read the dvd ROM CD CD-ROM etc.
  This cannot be a hardware problem, it must be the software should not it?
  Can anyone help?
  Does anyone have information on how to remove these disks of the computer? Im sure I can install a new one myself if I really need to.
  Unfortunately the computer is just out of warranty

  Hi Robert,.

  Unfortunately, your problem sounds like a problem with the hardware with the optical drive. The player itself must be able to refocus its lenses to switch between DVD and CD formats, and also to pass the pressed DVD and DVD burned.

  I suggest you tyre remove the device from the Device Manager Control Panel, then restart your laptop so that the optical drive will be recognized as a new component hardware and Windows will then be re - install with standard drivers etc. If this does not work then it looks like a new drive will be necessary.

  Unfortunately you say not what model of laptop you have (the removal procedure is not the same in all cases), but in general if the car is equipped with in-house it is held in place with one or two screws accessible from the bottom of the laptop that should be removed first, then the optical drive can be slid out of its location.

  Kind regards

• Satellite P200D - will not read the Memory Stick Pro duo adapter

  Kia Ora
  My Satellite P200 will not read my Memory Stick Pro Duo adapter, both brand Sony.

  I am running Vista Home Premium. SD cards are read OK.
  The adapter works fine in my PC running XP Home premium. I tried two cards different pro duo. Help, please!

  Hello

  I think you should consult your user manual because this type of card is not supported:
  + Memory Stick Duo/PRO Duo and Memory Stick adapter are not compatible with the multiple digital media card slot. Do not insert the Memory Stick Duo/PRO Duo into the slot. Data lost or damaged if you use one card other than those supported. +

  Do you have more questions? ;)

• Satellite A40-231: SD-R6112 will not read the DVDs I burned

  I finally got my DVD burner to work, but now the drive will not read the DVDs I burned, which, of course, defies the point of having a dvd burner in the first place... When I insert my dvd recently burned, "working" light lights and stays on. Same thing happens no matter how many times I take it out and put plug back in, restart my computer, etc... any ideas anyone?

  Hello

  @Magnus:
  Sometimes, CDs and burned DVD cannot be read with no closing sessions of engraving. You should check this option.
  In addition, this burning program did you use?
  I use Nero. Form is the program better combustion and I never had a problem.
  What you need to do is to test several DVDs. not all media work on the disc.

• elements of Adobe photoshop 11 will not read my canon T5 raw CR2 files.

  elements of Adobe photoshop 11 will not read my canon T5 raw CR2 files.

  Why?

  need help!

  Hi Zach.

  Sorry to say but 12 items came out a few months before your camera. Adobe stops the files updated camera raw for the older editions of software in order to get people to buy new versions of software when they get a new camera. It happened to me with LR3 when I got a new camera.

  Work towers there but they are a lot of steps, and I think you would be the conversion of files to one format other than RAW (tiff?) and that I'm not sure that will happen the same.

  I think you just need to get a newer items.

• my card reader will not read my sony memory card

  my computer will not read my memory card from sony camera

  If you go to... Start / my computer... and right click on the removable disk
  letter that represents the location of the memory card is... can you choose
  Explore and see the files on the card?