fsck fault against/dev/c/c_YYYY_MM_DD_HH24_MI

Hello.

Can anyone help me to get an idea of how solve the following...

During each boot fsck on demand there and I get the following in the configured email:

I have all the necessary information to connect.

I responded to your MP.

Tags: Netgear

Similar Questions

Questions of IDS-4215

I bought this unit and I have problems with it, I did the restore and I put the new password and pick-me-up Dungeon to it, how to make out of it?

CISCO SYSTEMS IDS-4215
Embedded BIOS Version 5.1.7 03/02/04 11:20:35.01
Compiled by dnshep
Evaluate the Options of execution...
Check for disc Image valid
GRUB, loading stage1.5.

GRUB loading, please wait...

GRUB version 0.91 (632K lower / higher than 523264K memory)

-------------------------------------------------------------------
0: cisco IDS (vmlinuz - 2.4.26 - IDS-smp-bigphys}
1: cisco IDS recovery
-------------------------------------------------------------------

Use the ^ and v keys to select which input is highlighted.
Press ENTER to start the operating system selected, 'e' to change the
orders before starting, 'a' to change the kernel arguments
before you start, or 'c' for a command line.

Entry 0 will be started automatically in 1 seconds.
Start ' Cisco IDS (vmlinuz - 2.4.26 - IDS-smp-bigphys} ")

root (hd0, 0)
Filesystem type is ext2fs, partition type 0 x 83
kernel (hd0,0)/boot/vmlinuz-2.4.26-IDS-smp-bigphys ro root = / dev/hdb1 had = flash)
Console = ttyS0 bigphysarea = 16384
[Linux bzImage, setup = 0 x 1400, size = 0x11b282]

Linux version 2.4.26 - IDS-smp-bigphys ([email protected] / * / _build_master) (version gcc 2.96 20000731 (Red Hat Linux 7.3 2, 96-112)) #2 SMP Thu Aug 18 11:03:13 CDT 2005
BIOS fitness card RAM:
BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
BIOS-e820: 000000000009e000 - 00000000000a 0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000-0000000020000000 (usable)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
0 MB HIGHMEM available.
512 MB LOWMEM available.
On the node 0 totalpages: 131072
area (0): 4096 pages.
area (1): 126976 pages.
area (2): 0 pages.
DMI does not exist.
ACPI: Unable to locate the PDSP
Kernel command line: ro root = / dev/hdb1 had flash = console = ttyS0 bigphysarea = 16384
ide_setup: a = flash
Local APIC disabled by BIOS - reactivation.
Local APIC found and activated!
The initialization of the #0 CPU
Detected 845,655 MHz processor.
Console: the unit dummy color 80 x 25
Calibrating delay loop... 1684.27 BogoMIPS
Memory: 449240 k/524288 KB available (kernel code of 1621 k, k 74656 reserved, 639 k data, 136 k init, 0 k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Get cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
The page cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I cache: 16K, D L1 cache: 16K
CPU: L2 cache: 128K
Architecture Intel machine control supported.
Intel machine check reporting enabled on CPU #0.
Enabling fast FPU save and restore... done.
Allowing the use of unmasked SIMD FPU exception... done.
Checking 'hlt' instruction... Ok.
UNIFIX POSIX compliance test
MTRR: v1.40 (20010327) Richard Gooch ([email protected] / * /)
MTRR: detected mtrr type: Intel
CPU: L1 I cache: 16K, D L1 cache: 16K
CPU: L2 cache: 128K
Intel machine check reporting enabled on CPU #0.
CPU0: Intel Celeron (Coppermine) stepping 0
by timeslice cut CPU: 365,62 usecs.
Motherboard undetected SMP.
Turned off turned on CPU #0
Value of ESR before activating the vector: 00000000
Value of ESR after activating the vector: 00000000
Local APIC interrupt using timer.
calibration of APIC timer...
..... CPU clock speed is 845,6568 MHz.
... bus clock speed host is 99,4889 MHz.
CPU: 0, clocks: 994889, slice: 497444
CPU0
Waiting on wait_init_idle (card = 0x0)
All processors have been init_idle
PCI: PCI BIOS revision 2.10 to 0xff6a9, last bus = 1 entry
PCI: Using configuration type 1
PCI: Hardware probing PCI
PCI: Hardware probing PCI (bus 00)
Limitation of direct transfers of PCI/PCI.
ISAPNP: digitization of the PnP cards...
ISAPNP: no Plug Play devices & found
Linux NET4.0 for Linux 2.4
Swansea University Computer Society NET3.039-based
The initialization of the RT netlink sockets
From kswapd
bigphysarea: 16384 pages for 0xc1606000.
Responsible journaled block device driver
Pty: 2048 Unix98 ptys configured
keyboard: there is no Timeout - at THE keyboard? (ed)
keyboard: there is no Timeout - at THE keyboard? (f4)
Series c 5.05 driver version (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI active ISAPNP
ttyS00 at 0x03f8 (irq = 4) is a 16550
ttyS01 at 0x02f8 (irq = 3) is a 16550
V1.10F real time clock driver
Initialized RAM disk driver: 16 discs RAM 4096 K size 1024 blocksize
loop: loaded (max 8 devices)
LPC: version 0.1 (August 18, 2005)
Uniform cross-platform E-IDE review pilot: 7.00beta4 - 2.4
IDE: assuming that the speed of the bus system 33 MHz for modes PIO; Override with idebus = xx
PIIX4: Controller IDE PCI slot 00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% natively: will probe IRQS later
ide0: BM - DMA at 0xf800-0xf807, BIOS settings: had: pio, hdb:pio
IDE1: BM - DMA at 0xf808-0xf80f, the BIOS settings: hdc:pio, hdd:pio
has: SanDisk SDCFB-256, CFA HDD
HDB: IC25N020ATCS04-0, ATA drive
has: disable DMA (U) to SanDisk SDCFB-256
BLK: queue c03bf1a8, I/O limit 4095 MB (mask 0xffffffff)
ide0 at 0x1f0-0x1f7, 0x3f6 on irq 14
has: attachment the ide disk driver.
had: task_no_data_intr: status = 0 x 51 {DriveReady SeekComplete error}
had: task_no_data_intr: error = 0 x 04 {DriveStatusError}
had: 501760 sectors (257 MB) w/1KiB Cache, CHS = 497/16/63
HDB: attached the ide disk driver.
HDB: host protected area-online 1
HDB: 39070080 sectors (20004 MB) w/1768KiB Cache, CHS = 2432/255/63, UDMA (33)
Check the partition:
has: hda1, hda2, hda3
HDB: hdb1, hdb2 hdb3 hdb4
IDE: late registration of the driver.
Review SCSI subsystem driver: 1.00
I2C-core. o: i2c core module version 2.8.7 (20040611)
I2C - dev. o: i2c/dev entries driver module version 2.8.7 (20040611)
I2C - proc.o version 2.8.7 (20040611)
I2C-i801 version 2.8.7 (20040611)
Net4: Linux 1.0 for NET4.0 TCP/IP
IP protocols: ICMP, UDP, TCP, IGMP
IP: routing 4096 buckets cache hash table, 32Kbytes
TCP: Hash tables configured established 131072 bind (65536)
Linux IP router multicast 0.06 and PIM - SM
Net4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting. Commit interval 5 seconds
Ext3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 file system) readonly.
Release of memory used kernel: 136 k released
INIT: initialization of version 2.84
Welcome to CIDS v4.1 (1) S47 (Phoenix)
Mounting proc filesystem: [OK]
Configuration of the kernel parameters: [OK]
Setting clock (localtime): my Apr 19 19:14:53 UTC 2010 [OK]
Activation of swap partitions: [OK]
Hostname parameter sensor: [OK]
modprobe: can't open dependencies file /lib/modules/2.4.26-IDS-smp-bigphys/modules.dep (no such file or directory)
Checking file system root
/ dev/hdb1: clean, 27334/83520 files, 56775/166666 blocks
[/sbin/fsck.ext3 (1)-/] fsck.ext3 - a/dev/hdb1
[OK]
Back the root read / write file system: [OK]
Find the module dependencies: depmod: can't open /lib/modules/2.4.26-IDS-smp-bigphys/modules.dep for writing
[NOT]
Checking of file systems
/ dev/hdb3: clean, 12 files, 2008, 1300/8032 blocks
/ dev/hda1: clean, 33/2656 files, blocks of 4184/10584
/ dev/hdb4: clean, 32/2280320 files, blocks 80505/4558443
/ dev/hda3: clean, 20/58232 files, 84949/232848 blocks
Check all file systems.
[/sbin/fsck.ext3 (1)-/ bootmnt] fsck.ext3 - a/dev/hda1
[/sbin/fsck.ext3 (2)-/ usr/cids/idsRoot/shared] fsck.ext3 - a/dev/hdb3
[/sbin/fsck.ext3 (2)-/ usr/cids/idsRoot/var] fsck.ext3 - a/dev/hdb4
[/sbin/fsck.ext3 (2)-/ mnt/recovery] fsck.ext3 - a/dev/hda3
[OK]
Mounting local filesystems: [OK]
Activation of local file system quotas: [OK]
Activation of the swap space: [OK]
Non-interactive startup entry
Setting the network parameters: [OK]
Set up the loopback interface: [OK]
modprobe: can't open dependencies file /lib/modules/2.4.26-IDS-smp-bigphys/modules.dep (no such file or directory)
Setting up interface eth1: [OK]
Start recorder system: [OK]
Kernel start recorder: [OK]
Load keymap: [OK]
Loading system font: [OK]
The initialization of the random number generator: [OK]
Audit of the allocated kernel memory: [OK]
No XL map shows
Charge Cidmodcap: WARNING: the kernel-module version mismatch
/lib/modules/CID/cidmodcap.o was compiled for kernel version 2.4.18 - 5smpbigphys
While this kernel version 2.4.26 - IDS-smp-bigphys
/lib/modules/CID/cidmodcap.o: symbol register_chrdev_Rsmp_0450333d pending
/lib/modules/CID/cidmodcap.o:
Tip: You are trying to load a module without a GPL compatible license
and unresolved symbols. Contact the provider module for
help, only they can help you.

[NOT]
Creation of boot.info [OK]
Checking for changes to the system since the last boot [WARNING]
Check the identification of the model [OK]
Model: IDS-4215
Error: mainApp has not started
From sshd: [OK]
From xinetd: [OK]
From crond: [OK]
From anacron: [OK]

Login: cisco
Password:
You are required to change your password immediately (years)
Change password for cisco
(ongoing) UNIX password:
New password:
Retype the new password:
NOTICE *.
This product contains cryptographic features and is under the United States
and local laws governing the import, export, transfer and use. Delivery
Cisco cryptographic products does not imply permission to third parties to import,
export, distribute or use encryption. Importers, exporters, distributors and
users
sensor connection: cisco
Password:
NOTICE *.
This product contains cryptographic features and is under the United States
and local laws governing the import, export, transfer and use. Delivery
Cisco cryptographic products does not imply permission to third parties to import,
export, distribute or use encryption. Importers, exporters, distributors and
users are responsible for compliance with U.S. and local country. With the help of
This product you agree to comply with the regulations and laws in force. If you
are unable to meet the United States and local laws, return the product.

A summary of U.S. laws governing Cisco cryptographic products to:
http://www.Cisco.com/WWL/export/crypto

If you need assistance please contact us by mail at
[email protected] / * /.

connection of the sensor:

Since you did the recovery I assumeyou already tried to the unit powering down and back up.

This is a weird problem I havn't seen before, but sometimes the sensors get currupt and need a full reimage to return to normal.

I would like to download the most recent image 4215 and TFTP in your sensor in ROMMON.

http://www.Cisco.com/en/us/partner/docs/security/IPS/6.0/installation/guide/hwImage.html#wp1030874

-Bob

How to catch the exact validation error message?
Hi experts,

I want to intercept the exact validation error message.
If the validate operation fails then I get the following SOAP fault:

< env:Fault xmlns:ns0 = "http://docs.oasis-open.org/wsbpel/2.0/process/executable" >
ns0:invalidVariables < faultcode > < / faultcode >
faultName < faultstring >: {{http://docs.oasis-open.org/wsbpel/2.0/process/executable} invalidVariables}
messageType: {{http://schemas.oracle.com/bpel/extension} RuntimeFaultMessage} < / faultstring >
< faultactor / >
< detail >
< exception / >
< / details >
< / env:Fault >

However, in the Manager of the company (audit trail) I see the following message to the failure to validate the operation:

Invalid data: the value of the variable 'req_ProcessAdjustmentOp' part 'bodyUPI' does not match the schema definition for this part of invalid text '?' in the element: 'date '. Invalid xml document is shown below:

I would like to send this message to the service consumer because it contains more information about the error. How I do that? I've tried the function ora: getFaultAsString() but I had the original sin.

Thank you
Viktor
The root cause of the problem is that, in the bpel fault lifted, the details of the fault are empty (i.e.) {summary}, {details} and
```
 are not populated for  element.
This same issue was logged and tracked via Bug 12551111 - VALIDATE ACTIVITY DOES NOT POPULATE FAULT VARIABLE FROM CATCH - published on My Oracle Support.

As per developments update in 12551111 :
Failure content won't be set for standard faults according to BPEL specs. It will be available in the audit trail.

This means that :
1. {summary} , {detail} and 
```
will be omitted for standard faults fault variables.
2. given that the details of 'fault' are not met, "validation" of the variable of fault against the schema (RuntimeFault.wsdl) should fail.

There is a demand for improvement already filed: Bug 12700279 - FAULT VARIABLE DETAILS ARE NOT POPULATED for STANDARD HOLES.
Unfortunately, at the moment there is no workaround known solution for this.

Best regards
Oana

Flex to the problem of web service communication

Hi, just like the title of State, I have problem during the web service-> Flex communication. I use class WebService ActionScript, to establish a connection with her, but I had a strange behavior. When I try to access the remote web services (particularly: http://109.74.206.146:8080/jax_ws/quarkservice? wsdl ) of my Flex Builder IDE, all is well. Even more, when I spend my folder and click ProjectName.swf project folder, without any server runs on my pc, the file is executed, communication with the web service is impeccable performed and response is retrieved. However, when I try to export a release build and to my Tomcat localhost, or if I try to copy ProjectName.swf to any other location on my drive, since the location of the project, where is stored, I got:
1. [RPC Fault faultString = "Error in security to access the url" faultCode = "Channel.Security.Error" faultDetail = "unable to load WSDL. If there are currently online, please verify the format of the WSDL and URI file (http://109.74.206.146:8080/jax_ws/quarkservice? wsdl) "] "
2A mx.rpc.wsdl::WSDLLoader/faultHandler() [E:\dev\3.0.x\frameworks\projects\rpc\src\mx\rpc\ws dl\WSDLLoader.as:98]
3A flash.events::EventDispatcher/dispatchEventFunction()
4. in the flash.events::EventDispatcher/dispatchEvent()
5 at mx.rpc::AbstractInvoker /() [E:\dev\3.0.x\frameworks\pro jects\rpc\src\mx\rpc\AbstractInvoker.as:168] http://www.adobe.com/2006/flex/mx/internal:dispatchRpcEvent
6 to mx.rpc::AbstractInvoker /() [E:\dev\3.0.x\frameworks\project s\rpc\src\mx\rpc\AbstractInvoker.as:220] http://www.adobe.com/2006/flex/mx/internal:faultHandler
7A mx.rpc::Responder/fault() [E:\dev\3.0.x\frameworks\projects\rpc\src\mx\rpc\Responder.as:49]
8A mx.rpc::AsyncRequest/fault() [E:\dev\3.0.x\frameworks\projects\rpc\src\mx\rpc\AsyncRequest .as:103]
9A DirectHTTPMessageResponder / securityErrorHandler ([E:\dev\3.0.x\frameworks\projects\rpc\sr c\mx\messaging\channels\DirectHTTPChannel.as:368])
10. at flash.events::EventDispatcher/dispatchEventFunction()
11. in the flash.events::EventDispatcher/dispatchEvent()
12. to flash.net::URLLoader/redirectEvent()
[Error CPP faultString = "Error in security to access the url" faultCode = "Channel.Security.Error" faultDetail = "unable to load WSDL.
< br / > if there are currently online, please verify the format of the WSDL and URI file (http://109.74.206.146:8080/jax_ws/quarkservice? wsdl) "] to "
MX. RPC.wsdl::WSDLLoader/FaultHandler() [E:\dev\3.0.x\frameworks\projects\rpc\src\mx\rpc\wsd l\WSDLLoader.as:98]
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent() to mx.rpc::AbstractInvoker / http://www.Adobe.com/2006/Flex/MX/internal:dispatchRpcEvent ([E:\dev\3.0.x\frameworks\pro jects\rpc\src\mx\rpc\AbstractInvoker.as:168])
to mx.rpc::AbstractInvoker / (http://www.adobe.com/2006/flex/mx/internal::faultHandler) [E:\dev\3.0.x\frameworks\project s\rpc\src\mx\rpc \AbstractInvoker.as:220] )
at mx.rpc::Responder/fault() [E:\dev\3.0.x\frameworks\projects\rpc\src\mx\rpc\Responder.as:49]
at mx.rpc::AsyncRequest/fault() [E:\dev\3.0.x\frameworks\projects\rpc\src\mx\rpc\AsyncRequest .as:103]
to DirectHTTPMessageResponder / securityErrorHandler ([E:\dev\3.0.x\frameworks\projects\rpc\sr c\mx\messaging\channels\DirectHTTPChannel.as:368])
at flash.events::EventDispatcher/dispatchEventFunction() at flash.events::EventDispatcher/dispatchEvent()
at flash.net::URLLoader/redirectEvent()
Thus the same file committed since the FlexBuilder or invoked directly from the folder of the project, where it resides, works perfectly. When I try to call from a DIFFERENT location, including deployment on my local Tomcat (or even just my office), I got the above exception. So, anyone know what is the problem? Thank you

There is an implicit approval when you run the application in Flex Builder. Outside of Flex Builder, if the call to the Web service is not mandated by LiveCycle Data Services, Flash Player security will not allow the connection the remote service.

Try to add a crossdomain.xml to the ROOT.war of your respective application server. Something like that...

http://www.Macromedia.com/XML/DTDs/cross-domain-policy.DTD">

Steve

I need assistance with the HTTP request procedure
This is the message I get debug, attempting a HTTPService request as follows
< mx:Application... initialize = "myService.send ()" >
Import mx.rpc.events.ResultEvent;
< mx:HHTPService id = "myService" url = "" data / myInfo.xml "result =" resultHandler (event) "/ >:"

[SWF] C:\Documents and Settings\ArchiMaster\My Documents\Flex Projects\krsl_corp\bin-debug\krsl_corp.swf - 786 719 bytes after decompression
[Fault faultString = "HTTP request error" RPC faultCode = "Server.Error.Request" faultDetail ="error: [IOErrorEvent type ="ioError"bubbles = false cancelable = false eventPhase = 2 text =" Error #2032: stream error. "]] ["URL: file:///C:/Documents%20and%20Settings/ArchiMaster/My%20Documents/Flex%20Projects/krsl_cor p/bin-debug/data/ilungas.xml"]. ["URL: data / ilungas.xml"]
to mx.rpc::AbstractInvoker / http://www.adobe.com/2006/flex/mx/internal:faultHandler () [E:\dev\3.0.x\frameworks\project s\rpc\src\mx\rpc\AbstractInvoker.as:216 ]
at mx.rpc::Responder/fault() [E:\dev\3.0.x\frameworks\projects\rpc\src\mx\rpc\Responder.as:49]
at mx.rpc::AsyncRequest/fault() [E:\dev\3.0.x\frameworks\projects\rpc\src\mx\rpc\AsyncRequest .as:103]
to DirectHTTPMessageResponder / errorHandler ([E:\dev\3.0.x\frameworks\projects\rpc\src\mx\mes saging\channels\DirectHTTPChannel.as:343])
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at flash.net::URLLoader/redirectEvent()

What it means? In addition, I do not use the default workspace, so Flex created only the ".metadata' but not the 'configuration' file, that is why, I had to copy a block as the default workspace. So, how do you get Flex to create two files no matter the location of the workspace? I really need help. Thank you!
Looks like the error message saying that "data / ilungas.xml ' was not found. You use url = "" data / myInfo.xml ' in your service. " They do not match.

RPC error string
Hey, guys:

I am completely new to Flex, and I started to use the HTTPService to extract information using the trial version until I started using a non-evaluation version. When I run the program, it now gives me this:

[Error CPP faultString = "Error in security to access the url" faultCode = "Channel.Security.Error" faultDetail ="" Destination: DefaultHTTP "]
to mx.rpc::AbstractInvoker / http://www.adobe.com/2006/flex/mx/internal:faultHandler () [E:\dev\3.0.x\frameworks\project s\rpc\src\mx\rpc\AbstractInvoker.as:216 ]
at mx.rpc::Responder/fault() [E:\dev\3.0.x\frameworks\projects\rpc\src\mx\rpc\Responder.as:49]
at mx.rpc::AsyncRequest/fault() [E:\dev\3.0.x\frameworks\projects\rpc\src\mx\rpc\AsyncRequest .as:103]
to DirectHTTPMessageResponder / securityErrorHandler ([E:\dev\3.0.x\frameworks\projects\rpc\sr c\mx\messaging\channels\DirectHTTPChannel.as:368])
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at flash.net::URLLoader/redirectEvent()

I installed my Flex on my C drive, and that's why I'm a bit confused with the message here.
Does anyone know how can I fix?

Alice
Hello

Thanks for the reply. Yes, I am this not working on the web server, and it turns out that the CPP has appeared because I'm importing additional controls that I don't need.

I'll definitely check out this article.
Thanks for the tip.

Alice

security issue with the virtual host
Hello

I use flex builder3 and php5 to run an application built in codeIgniter 1.6.3 and flex. Problem is that I have uses a virtual host to run codeigniter in the browser. My doc root is htdocs\projects\FlexPHP. Here my flex file resides. In the browser I can access by giving more url: http://localhost/projects/FlexPHP/bin-debug/FlexPHP.html

and I access to my php application in http://flexphp/ (path: htdocs\projects\FlexPHP\src\server-script)

I'm calling flex http service.

< mx:HTTPService id = "phpService".
' URL =' http://flexphp/profile/ProfileMngr '
resultFormat = "e4x" result = "showResult ()" useProxy = "false" showBusyCursor = "true" / > "
< mx:Button label = "PHP call" click = "phpService.send ()" / >

and get the following error

[Error CPP faultString = "Error in security to access the url" faultCode = "Channel.Security.Error" faultDetail ="" Destination: DefaultHTTP "]
to mx.rpc::AbstractInvoker / http://www.adobe.com/2006/flex/mx/internal:faultHandler () [E:\dev\3.0.x\frameworks\project s\rpc\src\mx\rpc\AbstractInvoker.as:216 ]
at mx.rpc::Responder/fault() [E:\dev\3.0.x\frameworks\projects\rpc\src\mx\rpc\Responder.as:49]
at mx.rpc::AsyncRequest/fault() [E:\dev\3.0.x\frameworks\projects\rpc\src\mx\rpc\AsyncRequest .as:103]
to DirectHTTPMessageResponder / securityErrorHandler ([E:\dev\3.0.x\frameworks\projects\rpc\sr c\mx\messaging\channels\DirectHTTPChannel.as:368])
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at flash.net::URLLoader/redirectEvent()

I placed the cross-domain policy file in server folder script URLS are different, but it does not solve my problem.

I tried with another virtual host that is not a codeigniter application, a simple php page that displays an xml... works correctly.

Any help is appreciated. Thanks in advance.

no problem on the side of flex... need to escape crossdomain.xml file in the htacess of codeigniter i.e RewriteCond $1! ^ (index\.php|images|application|uploads|robots\.txt|crossdomain\.xml) in the htaccess file.

Adapter Qosmio F30 AC fried (burnt cables) is it the fault of notebooks?

Laptop = Qosmio F30/695ls

I was wondering if other people have encountered this problem? Is this a fault in the design of the adapter? The adapter model number is; * PA3237U-3ACA. *.

The cord was fine until today (looked perfect) death of my laptop I thought it has not been plugged in properly checked if all parties, but each has been connected - then I noticed a melted part where wiring has been merged with plastic sheath. (just after the elbow on the wire protector which leads to the laptop leaves the ac adopter)

I would just replace it immediately if I know it's only fault the adaptors - however I am worried there is a problem with the laptop itself. In the last few weeks, I noticed a very high frequency noise coming from him. Sometimes near the back where the power cable is connected and other times near the waterfront where the battery and HARD drive are (the drive is new and only a few months old) the laptop itself is almost 3 years old bought in June 2006. I'm afraid that the AC adapter has damaged the internal power system or the internal power supply was to damage and killed the adapter? Does anyone know how to check if the laptop is damaged internally or if it's just the AC adopter? I don't want to just replace the adapter and end up frying the motherboard!

I have a second battery with a few minutes of charge, so if you need me to check anything on the laptop I can (operating system is vista)

Any ideas at all about the cause of the problem, welcome!

Oh PS. I live in Ireland, the electric current that he 220V and it is also connected to the Earth, I use an adopter plug multi protected against overvoltages.

Hello

> Does anyone know of a way to check if the laptop is damaged internally or if it's just the AC adopter? I don't want to just replace the adapter and end up frying the motherboard!
You can easily test.
Simply unplug the AC adapter and check if the laptop works correctly using only the power of the battery.
Generally, the laptop can not damage the AC adapter! As far as I know technically this is not possible then I guess that your adapter is defective and must be replaced

See you soon

Satellite 1800: Fault pin plastic LCD display!

"Look at the LCD display screen. If you can see a small image on the screen, backlight fluorescent display screen can be disabled. Light of a flashlight directly to the screen will make it much easier to see if or not there is a screen image actually present, but not turned on. On most Toshiba laptops, there is a small plastic or metal pin near one of the LCD cover hinges. When the display lid is closed (closed), this PIN is pressed against an internal switch that turns off the backlight, saving battery power. You can turn on the backlight by pressing repeatedly on this PIN. The normal screen image will be then suddenly appear or reappear. »

It's a recommendation, I took for my Satellite 1800 Toshiba help suggestiuons... However, when I type the PIN, she don't flick the backlight on and then turns off very quickly. I can't stay!
It drives me crazy and I can't find anywhere on the net wherer this fault is mentioned.

The problem has gradually worsened over time. I used to be able to move the angle of the screen and tapping the PIN to operate. But now, I don't have a chance so he could stay forever! I think I have to open the screen and check if the PIN needs to re - solder or perhaps the FL lamp wire is pinching somehow...

I do not know... I am far from being a geek... also... What does FL stand for?

PLEASE PLEASE PLEASE HELP.

Hi Liam,

The description of your problem suggests that the FL inverter has failed. It is a component that provides the background lighting for your screen.

Normally when you close the PIN you are talking about depresses a switch that turns off the UPS FL. If you can get a momentary illumination of you LCD when you prod this switch I think the inverter FL itself is defective.

The bad news is that you will need to take your laptop to a partner of authorized Service for repair. The good nes, it's that the FL inverter is not one of the more expensive items.

Kind regards

I get a bluescreen error code 1001 reads fault bucket-1514598552

Original title: I get a blue screen. Overview of event code 1001 bed fault bucket 1514598552. I already disable all third-party software, so it's not the source of the problem.

I don't know if that helps, but the name of the game is Skyrim. I've already put all the settings down as low as possible for my PC. I am running Windows xp Pro. x 64 edition. I followed all the instructions that I had on the error report to stop the blue screen issue. What could someone tell me is very appreciated. I have a video card GeForce GTX 260 Invidia (driver version) 285.58 and an Intel Core 2 Quad 1333 FSB.

It can help to look at the files minidump against accidents with a debugger.

Can you zip the minidump in the C:\Windows\Minidump folder files and (provide link) available via Windows Live SkyDrive or similar site?

The following link has information about the use of Windows Live SkyDrive:

http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

If you have problems to compress the minidump files copy the minidump files to another location such as a folder on the desktop

In addition, you do not necessarily have compress the minidump files, you can download one at a time.

His work on Alpha to Dev, but works only on Z10

Hey there everyone! First of all, thank you for this forum, I had some problems in the past and I found some solutions here. Well, this time I couldn't find any, so I'm making my own post!

Well, me and my team, we have a problem. Our application has multiple sounds on it. We do this with HTML5, JS, CSS3, Phonegap. The sound works fine on my PC when it should play and it works also on our Dev Alpha. We have a Z10 to test the application subsequently a final device to make sure that the app works very well. But when we put on the Z10, wow! The sound does not work and worse, there is a good chance that the application stops working, it is frozen. Once she even restarted the Z10!

Then, someone has an idea? We do not use libs like jQuery. And also, I have another doubt. How can I make the screen do not resize when the background is double clicked and how lock screen allowing the user to change the vertical view to horizontal view, I want to block to vertical view only.

Thanks in advance!

Audio rendering

For audio, this probably has to do with the limits of the audio channel of OMAP (Dev Alpha B, Z10 STL100-1) and Qualcomm (Z10 STL100-2/3/4). Most likely, the Z10 test you on is STL100-3, which is the set of Qualcomm.

For the OMAP material, there are 64 contexts of available multimedia rendering, which is a good amount.

For Qualcomm (and this is a limitation for any device based on this material) there are 6 audio streams available on the scale of the device. Every time you the preload/play a new audio file, it takes an additional audio stream. You can see how this would cause problems quickly.

If overwrite/reset is a pretty dramatic effect, and I would be a JIRA issue against this newspaper because, in the worst case, I expect the audio does not play. not to crash the machine.

The current solution is to use an OpenAL extension, we have currently available as a plugin of Cordoba:
http://devBlog.BlackBerry.com/2013/07/pglowlatencyaudio-port-for-BlackBerry-10/

If you don't want to use of Cordova and direct WebWorks, you will need to explore your own custom extensions. OpenAL bypasses the mm-engine layer rendering and is not supported by the same limitations.

Unfortunately, the decline in performance and the side effects of mixing too many simultaneous sounds on chipset Qualcomm is radical enough. Being a hardware problem, the problem becomes very complex, but our teams are working to improve I just don't have a timeline on it yet.

Resizing of the screen

To avoid this, there are two options. The first is to assign a room when you lock the initial-scale, scale minimum and maximum scale values. Along the lines of:
It's also a good idea to wrap your content inside a
container. Example:
```
    
        ...
    
    
        
            ...
        
    
```
And use some of the styles on this container to ensure that the content does not exceed the dimensions of the screen. Example:
```
...

    ...
    

...
```
The second option is to operate the touch-event mode which should theoretically disable the zoom:

http://developer.BlackBerry.com/HTML5/documentation/touch-event-mode.html

However, it was until recently brough and seems to be broken. A JIRA is recommended for this question.

Orientation lock

This can be done in the config.xml file in the blackberry.app and specifying applicable element:

http://developer.BlackBerry.com/HTML5/documentation/param_element.html

ISE restoration fails after 80% (Segmentation fault)

Hi all

After a system crash, I try to restore. First of all, I did an ise to reset zero-config application, then a restore on an ftp repository.

After 80%, it will fail with to DB Syncup with a segmentation fault. Tried with different backup versions have the last patch level.

Any ideas?

Thank you

Start the restore. Please wait...
% of ongoing restoration: from restoration... 10% have completed
% of ongoing restoration: recover the repository backup file... 20% completed
% of current restore: backup data decryption... 25% completed
% of current restore: backup data extraction... 30% completed
Leaving the currently connected AD domain
Please join the AD domain since the administration interface
% of ongoing restoration: ISE stopping process required for the restoration... 35% completed
% of ongoing restoration: restoration ISE configuration database... 40% completed
% of ongoing restoration: the metadata for database update... 70% finished
% of current restore: restore the logs... 75% have completed
% of ongoing restoration: ISE performance, database synchup... 80% finished
/opt/CSCOcpm/bin/isecfgrestore.sh: line 1248:11162 Segmentation fault (core dumped) curl - q - k - a tlsv1 - connect-timeout 10 https://$MYIP/admin/index.jsp > / dev/null 2 > & 1
/opt/CSCOcpm/bin/isecfgrestore.sh: line 1248:11177 Segmentation fault (core dumped) curl - q - k - a tlsv1 - connect-timeout 10 https://$MYIP/admin/index.jsp > / dev/null 2 > & 1
/opt/CSCOcpm/bin/isecfgrestore.sh: line 1248:11187 Segmentation fault (core dumped) curl - q - k - a tlsv1 - connect-timeout 10 https://$MYIP/admin/index.jsp > / dev/null 2 > & 1

.. .and so forth

**************************************************************************************************************

Deploying applications engine Cisco OS version: 2.2
ADE-OS Build Version: 2.2.0.162
ADE-OS system architecture: x86_64

Copyright (c) 2005-2014 by Cisco Systems, Inc.
All rights reserved.

Version information for the installed applications
---------------------------------------------

Cisco Identity Services engine
---------------------------------------------
Version: 1.3.0.876
Build Date: Kills Oct 28 04:02:29 2014
Installation date: Fri Dec 5 08:31:15 2014

Cisco Identity Services engine Patch
---------------------------------------------
Version: 1
Installation date: Mon Jan 26 10:21:50 2015

After sending the papers suitable for TAC, I learned that even if the restoration seemed to have failed, 80% the effective restoration is complete and what was failing was the synchronization of the node. Knowing this, I could access the admin GUI and synchronize to other nodes and worked no problem manually.

It turns out it's documented issue, CSCur36983will be fixed in version 1.4.

Here is the answer I got from the TAC:

"According to the newspapers sent, we are certainly hit CSCur36983 who will be."
set in point 1.4 of the ISE:
https://Tools.Cisco.com/bugsearch/bug/CSCur36983/

According to the details of the bug, when we reach 80% of the food part is
has already completed. What is a failure is a synchronization with the rest of the nodes
in the deployment. Therefore, you can reload the ISE at this point and you
should have access to the GUI admin again. From there, you can force a synchronization upward with the other nodes. »

Error on verification of messages against security policy Error code: 3603

Hello
We are migrating our WL10.3 WebServices to WL12.1.2 and we have not been able to rely on them as we have done on 10.3. On their WSDL is indicated like this ws security policy:
< wsp
' xmlns:wsp = ' http://schemas.xmlsoap.org/ws/2004/09/policy "
' xmlns:sp = ' http://docs.oasis-open.org/WS-SX/WS-SecurityPolicy/200702 ">
< sp:SymmetricBinding >
< wsp >
" < = sp:IncludeToken sp:UsernameToken ' http://docs.oasis-open.org/WS-SX/WS-SecurityPolicy/200702/IncludeToken/AlwaysToRecipient ">
< wsp >
< sp:HashPassword / >
< sp:WssUsernameToken10 / >
< / wsp >
< / sp:UsernameToken >
< / wsp >
< / sp:SymmetricBinding >
< sp:SignedSupportingTokens >
< wsp >
" < = sp:IncludeToken sp:UsernameToken ' http://docs.oasis-open.org/WS-SX/WS-SecurityPolicy/200702/IncludeToken/AlwaysToRecipient ">
< wsp >
< sp:HashPassword / >
< sp:WssUsernameToken10 / >
< / wsp >
< / sp:UsernameToken >
< / wsp >
< / sp:SignedSupportingTokens >
< / wsp >

When we try to use this webservice of the new WebLogic 12.1.2 domain we receive following SoapFault
" < = xmlns:wsse env:Fault ' http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd ">
WSSE:InvalidSecurity < faultcode > < / faultcode >
< faultstring > message error on the check against security policy Error code: 3603 < / faultstring >
< / env:Fault >
Can someone help with this problem? We do not know what is missing or if there are additional required configuration or incompatibility.
For more information, these guidelines was considered:
Thank you in advance and best regards,
Ruben

Finally, I discovered what was going on.

This error is produced by a NullPointerException on the line of weblogic.wsee.security.wss.plan.SecurityMessageInspector class 535 when you call the getDigestMethod () .getAlgorithm)

REF = this.svalidator.getReference (st, this.blueprint.getXmlSignatureFactory () .newDigestMethod (signingPolicy.getDigestMethod (.getAlgorithm ()), (DigestMethodParameterSpec) null), new ArrayList(), token.isIncludeInMessage ());

Which differs from the version 10.3, where a default collection method is provided

localObject1 = this.svalidator.getReference (localSecurityToken, this.blueprint.getXmlSignatureFactory (.newDigestMethod)("http://www.w3.org/2000/09/xmldsig#sha1", (DigestMethodParameterSpec) null "), new ArrayList(), paramSecurityToken.isIncludeInMessage ());

Trying to understand the policy of the WS file, I decided that if we use a SignedSupportingTokens must also configure how tokens must be signed, otherwise use the SupportingTokens instead, which is what I did.

So eventually, if the policy was not set properly, I do not understand why in this new version a NPE is triggered (wrapped in an error code 3603). Maybe it's a bug?

See you soon,.

Ruben

VMware Player 6 crashes (fault VMM 14)

Hello
I'm under 64-bit Scientific Linux 6.5 comments (a derivative of RHEL 6.5 and binary compatibility) on a 64-bit Windows 7 host. Everything works fine with 1 virtual processor, but if I turn 2 or 4 the VM crashes usually (during startup, but), or applications in the virtual machine crash. (CPU host is a Core i5-2410 M, 2 physical cores, 4 cores with HyperThreading).
I usually get one of the following error messages:
The CPU has been disabled by the guest operating system. Power off or reset the virtual machine.
Fatal error of VMware player: (vcpu-2)
vCPU-2: fault VMM 14: src = rip MONITOR = 0xfffffffffc26bf94 regs = 0xfffffffffc008b70
I have attached the referenced paper.
No idea what is the problem?
Kind regards
György
UPDATE: I checked the same VM with 64-bit Ubuntu 13.10 host, and I could not reproduce the problem.

GyorgySzekely wrote:

Since I don't know any way to update the microcode on Win7, I guess that's it. I'm going to migrate my dev environment to linux, or get used to build with a single processor under windows.

Another possibility to plug Fling of Matt!

Please visit https://labs.vmware.com/flings/vmware-cpu-microcode-update-driver.

(This still cannot treat your problem).

Segmentation fault (core dumped)

Hi all
11.2.0.1
AIX 6.1
We have DEV & UAT servers with oracle 11.2.0.1 db. and with the same operating system.
Then we have a pro * c program exe which run on DEV without error, but when it is run on UAT he throws Segmentation fault (core dumped)
But the database have the same content of tables and data.
No idea why this error?
Thank you
Petra k.

Hi all

I let the program do some trace and exposure where the error occurs and it seems that the program can't handle certain conditions. So, it's a bug in the program.

Thank you

fsck fault against/dev/c/c_YYYY_MM_DD_HH24_MI

Similar Questions

Maybe you are looking for