Fusion 5 - USB 3.0 supported - really?

Similar Questions

• Fusion 6, USB 3.0 and WD My Passport Ultra 1 TB... IN CASE OF FAILURE!

  Has anyone found a verified correction to get a Western Digital my passport Ultra 1 TB USB 3.0 working with VMware Fusion 6?  I know it is problem or failure with VMware Fusion because it works very well in VMware Workstation 10.  A largely acquired VMware workshop, it's very disappointing.

  History

  Built the new virtual machine for Microsoft Windows 7 Professional 7 x 64 and conducted all Microsoft Updates using VMware Fusion 6.0.3 and OS X 10.9.2 with Late 2012 13 "MacBook Pro retina.

  Problem

  Connected to Western Digital my passport drive Ultra 1 to USB 3.0 to newly built VM.  The following error:

  The "(Western Digital My Passport 0741) device" could not connect to its ideal host controller. "

  

  Solution (that is, not really a Solution)

  Use VMware Workstation 10 on workstation hp Elite 8300 running Windows 7 Professional x 64.  No problem encountered.

  If anyone has any ideas on how to fix this very annoying VMware Fusion and USB 3.0 I would be very happy.

  It is probably because the linux distribution supports USB 3.

• Satellite A60 - USB ports are not really high speed

  Hello
  It seems to me that the SATELLITE A60-197ITA USB ports aren't really high speed. They are very slow!
  Some diagnose program says that the BIOS supports USB Legacy...

  What is the problem?
  What can I do to have the best performance?

  Hello

  I put t know what external device you use, but in my view it is also the external device power function.

  Legacy support can be enabled in the HW of Toshiba installation tool. You can find it under control panel.

  Good bye

• It supports Fusion 7 USB 3.0 with Windows 7?

  Simple enough question.  Is it supported?  If this is not the case, is there absolutely no compelling reason to upgrade.

  IN CASE OF FAILURE!

• USB-type of support iPhone c?

  iPhone can support usb type c?

  Yes, check this:

  This USB - C cable connects to your iPhone, iPad or iPod with connector of lightning on USB - C of your computer to sync and charge port. You can also use the cable with a USB - C Apple 29W power adapter to take advantage of the function of fast charging on the iPad of 12.9 inches Pro.

  Compatibility:

  IPhone models

  • iPhone 5
  • iPhone 5 c
  • iPhone 5 s
  • iPhone SE
  • iPhone 6
  • iPhone 6 Plus
  • iPhone 6 s
  • iPhone 6 sec more

• Dv6-7229wm Windows 8 for Windows 7 no USB 3.0 supports

  I have a HP Envy dv6-7229wm. I have almost all my drivers installed and running, except on Windows 7 Pro SP1 64-bit.

  It is a system of AMD with the APU A10 - 4600M / 7660 G HD / 8 GB memory / replaced 750gig HDD 250gig DSS

  I have 4 x (3 x USB 3.0 Ports) USB Ports & (1 x USB 2.0 Port)

  USB 2.0 Port works great!

  USB 3.0 ports offering power, but no info is detected by Windows 7 Pro

  My mistake: (!) XHCI USB controller compatible host

  I need Windows 7 to work as 8 or 8.1 is not supported. Can HP if you please help me with this problem. I'm on 4 hours of research on just this issue and I'm stumped.

  Again, everything works fine and as you can see in the Device Manager the ony question is USB 3.0.

  Thanks in advance for the help. Let me know if any additional info is needed.

  Plug connection http://support.hp.com/us-en/document/c03497773

  

  

  Hello:

  Download and install the driver for AMD chipset on the link below. The first file listed.

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

• gesture control is not active in my sve1513byn... Support really gesture control?

  Gesture control is not able to activate in my laptop. Its model is sve1513byn. Really support gesture control... ? Give me some advice so that it can work properly

  What does the control sign touchpad... ? How can we use them... ?

• Taking USB Flash drive supported Mass Storage Class Ver 1.1

  Hello

  I would like to know if the 128GB sandisk USB MSC Version 1.1 compatible player USB flash?

  If supported, is what model?

  Thank you very much for your advice.

  Kind regards

  Hong

     Salvation Hong,

  A good friend, Yes, I said in my post # 2 above.

  USB 1.1, 2.0, 3.0 and 3.1 versions, are compatible with each other.

  All of the submissions from SanDisk (Flash USB drives or USB key), are compatible with the USB MSC Protocol.

  -Online all USB Flash drives, is compatible with USB 1.1.

  See and choose here: http://www.sandisk.com/products/usb/drives/

  Enjoy!

  Sincerely, Alfred.                                                                (Google translation)

• E3000 displays "USB is not supported" error with external hard drive

  I have the E3000 router and recently bought a USB WD (Western Digital) 2 TB external hard drive.  I plug the HDD on the router, open the home page of the router (http://192.168.1.1/) then click on storage > disk and I get an error of "the USB is connected is not supported"-suggestions on how to solve this problem?

  Thanks for any help!

  I had the same problem with my WD hard drive today after setting up my E3000. Remove the protection 'security' or the password on the disk as well as level of what the duration of sleep obtained took care of this problem. My WD is now working with my E3000 seemlesly.

• Will be USB 3.0 supported by Windows Vista

  Windows Vista will support USB 3.0?

  Just check it has USB3 Vista drivers for your mother/USB3 card (depending on where you have your USB3 ports).

• USB headset not supporting micro

  I have a pair of headhones (Creative Fatal1ty) and I am unable to understand the configuration of my microphone on Vista 64. I can hear fine, but when I try to use my microphone in a game it does not recognize the microphone. The only game I play is Battlefield 2. I want to use Teamspeak, but it does not recognize my mic either.

  Any ideas?

  Thank you in advance.

  Maybe I should clean that I need. With XP, I used a piece two micro and headphones set which means that it was not USB but seven. Jack connections. With the USB it does not show my connection MIC, headphones just without mention of MIC. Did I miss something in my config in Vista?

  Hello

  Are you able to use the headset for other purposes out of the game?

  Method 1.
  Let install us the latest drivers for this helmet from the manufacturers site and check.

  I recommend you to download the drivers for this device from the link below and check.
  Here is the link:
  http://support.creative.com/Products/ProductDetails.aspx?catID=1&CatName=Sound+Blaster&subCatID=231&subCatName=MIDI+Keyboards&prodID=17806&prodName=Fatal1ty+USB+Gaming+Headset+HS-1000&bTopTwenty=1&VARSET=prodfaq:PRODFAQ_17806,VARSET=CategoryID:1

  Installation instructions of this device on the Creative site.
  http://support.creative.com/kb/showarticle.aspx?SID=56927

  Some features of this headset is only available as silencer and VoiceFX features available only with its Sound Blaster X - Fi Titanium card.

  Here is the link for it:
  http://us.store.creative.com/Fatal1ty-Professional-Series-Gaming-Headset-MKII/M/B002BH3JDA.htm

  For more information see the link below:
  http://support.creative.com/kb/showarticle.aspx?SID=2483

  Method 2.
  If the problem persists I recommend you follow the steps proposed by Srinivas RMicrosoft support, Moderator on Friday, September 11, 2009 20:36 in the thread below:
  http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/955e8893-D357-4D4E-a3ed-1023400d1d88

  Hope that helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• USB redirection is supported in Mac vWorkspace connector?

  Hello

  I don't see an option to connect to the USB that is connected to the MacBook.

  Please see the Version for connectors vWorkspace compatibility matrix for a complete list of the features supported on your endpoint.

  The connector for Mac OS only supports a subset of the Windows connector.

• VMWare Fusion 7 / 3 displays not supported?

  Hello!

  I recently added a third monitor to my setup, but it seems that 3 screens could not be supported when using the unit. Here is my configuration:

  -Retina Macbook Pro 13 "

  -2 external displays

  -Instance Windows Pro 8.1 with VMWare Tools installed

  I get a message saying Configuring display not taken in charge trying to allow the unit with the 3rd screen active. When I unplug the, it seems to work. I tried to increase the VRAM without success.

  Anyone who performs this type of installation with success? I can find no documentation saying it is or is not actually supported.

  Thank you!

  I use three monitors with Window 7 and my rMBP Fusion 7.  Two are HDMI, Display Port.

  Did some research here and found a post examining in detail the problem with Fusion 6.

  This post, mudaltsov wrote:

  We will work on the resolution of this problem in the merger, in the meantime, here is a workaround solution. Stop the virtual machine and cesser stop merger, and then add the following lines to the .vmx file:

  SVGA. AutoDetect = "FALSE".

  svga.numDisplays = '3 '.

  svga.vramSize = "134217728.

  svga.maxWidth = "8192"

  svga.maxHeight = "4096".

  This disable automatic detection of the display limit and allow the virtual machine to use up to 3 screens. You can change to 4 If you think that you could connect a 4th screen (using the Thunderbolt and HDMI ports). The absolute maximum number of supported views is currently 8.

  I followed the steps above and it works very well in Fusion 7 too.

• A powered USB hub will support Ethernet / USB?

  Wifi in my office is uneven, so I need to wire a Macbook Pro (if that's the term). Because the Macbook Pro is not an ethernet port, I get an ethernet cable / USB. I also get a USB hub with an AC adapter.

  I know that you should not the ethernet cable / USB in a hub that is normal because it won't have enough power. But a powered hub will provide enough power for thin ethernet connection? (This laptop gets transported frequently, so I want to minimize the number of items that need to be plugged in every time.)

  Thank you-

  Christine

  I wouldn't use a usb to Ethernet port, I would use the port of Thounderbolt ter http://www.apple.com/shop/product/MD463LL/A/thunderbolt-to-gigabit-ethernet-adap

• Laptop HP 15-R084NG: is it possible to copy a HP recovery on another USB flash drive support?

  Hello.

  Just a few questions please:

  1. when I do only once "HP Recovery Media" to a USB key, I can then 'copy' and 'paste' on another USB flash drive as long as the 2nd flash player has sufficient capacity?

  The recovery still works well?

  I ask this question in case I have to change to another USB flash drive and I am aware I can only have a copy of the HP recovery.

  2. If this is the case, I then can also make a backup on a Western Digital external drive so that in case of malfunction of the USB flash drive, can I still transfer files to another USB flash drive?

  Thanks in advance for the answer.

  Best regards.

  Hello

  Copy / paste do not work. Please, try the following method:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/this-is-how-to-make-a-2nd-set-of-recovery-disks/TD-p/1694703

  Kind regards.