G7-2320dx Pavilion: USB not working properly

Similar Questions

• Front 2 USB not working properly

  So I got my Erazer X 510 for about 5-6 months and my USBs in front of 2 do not work properly. The blue, I think that USB 2.0, works for the load, but whenever I put something she says even the Description of the device of the request has failed. One yellow, I think that 3.0, does just not all. Does not load, not a not my USB headset the light, stuff like that. They have all both stopped at literally the same time. There are 240 days left in the guarantee of duration.

  I agree with the suggestions of the Majestic...

  A few other things you could try would be to go to Device Manager and see what it says about the State of the USB device.

  You could also download and run Lenovo Solution Center, our diagnosis package and see if he can identify problems with the USB system.

  Mark

• Peripheral USB not working properly

  original title: no

  my USB doesn't work when I plug it into any device. wireless mouse or everything usb will not turn on.

  Hello

  If a PC (not a laptop) the port USB can be replaced if necessary with a card and they are not expensive.
  A laptop would need a computer store real (no leeks and glances at a BestBuy or other BigBox
  Stores) or system manufacturer support.

  Check / settings (BIOS/CMOS) often F2 when you start screensaver - make sure that the embedded USB
  is activated.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Mouse - touchpad and USB - HID - does not work properely on Satellite L40-139

  The mouse is very unstable. Mouse touchpad both usb do not work properely, but the touchpad a little better. It happens that, even if the mouse using USB to the point does not move, while the left and right button are always react.

  It is brand new computer (L40-139) with initially installed Windows Vista. How can I solve the problem?

  It is very disturbing. Thank you.

  Hello

  have you ever tried to recover your machine, which means a complete reinstallation of your system? First: to exclude the material errors, you must perform this step, and if the error persists, then I suggest you to contact a service partner chartered for a checkup of material and a repair action.

  If the problem occurs after reinstalling windows, visit the following link to find the closest to the ASP available in your country:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Greetings

• Error of USB host - peripheral controller is not working properly because Windows cannot load the drivers required for this device. (Code 31)

  Original title - USB - IF xHCI USB Host Controller

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  I have a permanent error on my computer and when I run the troubleshooter I get the above message.  It says Windows cannot load the driver.

  Hello

  USB devices remove all you can - restart the computer - is still there, the error? If it isn't
  It is related to one of the add-in devices that you removed. If she is still there, then, the question is
  either a device internal who can not remove or physically with the USB bus itself.
  If it was not there, add devices at a time until it is displayed - keep in mind that it is
  possible that there are two (or more) devices in conflict over the issue. Once you
  identified the check of the aircraft with the help of the manufacturer.

  1. to find the control panel - device - device - right-click on it - uninstall - Manager then
  Restart the computer to see if it clears.

  2. same place - double click on the device - driver tab - driver update - to see if that helps.

  3. check with the support of system manufacturer (manufacturer of motherboard for customized systems), their
  online documentation and drivers, diagnostics and ask questions in their forums on all known
  questions. Update the Bios and chipset or other USB drivers.

  =====================================

  If necessary, we will use these additional troubleshooting methods:

  How to fix Code 31 errors
  http://pcsupport.about.com/od/findbyerrormessage/a/code-31-error.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Media Center won't play by video converter USB error ""files needed to display video are not installed or not working properly. " Restart the computer or Media center.

  I use USB to HDMI. TV, it is attached to works very well with the screen of the PC, but not with windows media center. Get the error message "the files needed to display video are not installed or do not work properly. "Restart Media center or computer" whenever I have to plug the usb device and you try to play a video in wmv recordedTV. Otherwise, it works fine on the PC monitor. What is the problem? Can it be fixed? I use questions cable 'Câble questions SuperSpeed USB 3.0/2.0 to HDMI/DVI for Windows and Mac up to 2048 x 1152/1920 x 1200' with windows 7. Is there another brand and model that works?

  On Wednesday, September 3, 2014 13:19:09 + 0000, CharlesHickox wrote:
   
  > I use USB to HDMI. TV, it is attached to works very well with the screen of the PC, but not with windows media center. Get the error message "the files needed to display video are not installed or do not work properly. "Restart Media center or computer" whenever I have to plug the usb device and you try to play a video in wmv recordedTV. Otherwise, it works fine on the PC monitor.
   
  I assume you mean WTV and not the WMV files? Likely the reason is that the adapter
  questions of cable is not HDCP compatible. (Rules of DRM Media Center
  apply).
   
   
   
  __________________________________________________________________________________________________
  Barb
  MVP Windows Entertainment and connected home
  My Blog - http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   

• USB drivers do not work properly.

  I have a netbook Vaio (name of the VPCM13M1E model) and USB drives will not work correctly. I ran a microsoft fix (hardware and devices one by one). The results said:

  -universal host controller USB Intel (r) 82801g (ICH7 family) - 27 8 does not work properly, and it has not been fixed.
  -Intel (r) 82801g (ICH7 family) USB2 enhanced host controller-27CC does not work correctly, and it has not been fixed.
  -Hardware changes may not be detected.
  Its very annoying because I cannot plug anything on the USB.
  Help, please.
  Camille

  There was a lot of mistakes in the case where the display indicating a gel delivers that seems to have started in early April.

  These gels seem to be preceded by the following error (Source - core-EventTracing):

  Session "Microsoft Security customer OOBE" stopped because of the following error: 0xC000000D

  This error can be caused by a corrupted EppOobe.etl.

  You may be able to resolve the freeze by recreating the EppOobe.etl.

  First of all, can you do the following:

  Start > type options files in the "search programs and files ' and press 'Enter' keyboard > view > then under" Hidden files and folder "select"Show hidden files and folders and drives"> OK

  Then go to the following folder:

  C:\ProgramData\Microsoft\Microsoft Security Client\Support

  In this folder click EppOobe.etl , and then rename the file in EppOobe.bak

  Restart the computer and let Windows recreate the EppOobe.etl.

  I hope that will stop the freezing issue.

  If the problem persists with USB you can restart the computer using safe mode and see if the problem exists in Mode without failure.

• My cooling system does not work properly model is Pavilion 5CD2086QMY A7A43UA #ABA g7

  My cooling system does not work properly model is Pavilion 5CD2086QMY A7A43UA #ABA g7

  Use a can of compressed air in the opposite direction of the normal airflow with the machine off.

• Keyboard does not work properly

  Hello

  I had trouble getting my laptop satellite to initialize. Recovery disks & pressing F keys weren't working so I decided to open the laptop to see if there are any loose connections. To my surprise, the laptop seems to work again once I had the USB keys and put back them in! Unfortunately, before that I did, I opened the keyboard and peeked inside.

  When I booted up and tried to use the keyboard keys half of their work and the other half seem to think that they represent two other keys for example if I type the letter 'E' I get '3' and '-' as a whole. After 5-10 minutes the entire keyboard will become totally unresponsive until I restart again. Of course, I think I've done something here because this problem since I opened the bottom of the keyboard. This could be a hardware failure I have caused or is anyway that this issue can be resolved without replacing anything?

  Thank you very much

  Tom

  Hi Tom

  Theoretically, it might be just a connection lost between the keyboard and the motherboard, but I'm afraid, it can be a serious problem of m.
  Maybe you have damaged the connector of the keyboard cable or something similar, and not the keyboard does not work properly.

  I think the keyboard needs to be replaced to check if only this part is affected

• Satellite L670 - after Win 8 upgrade WIFI does not work properly

  Afteer upgrade to Win 8, the WiFi of my Satellite L670-128 has stopped working properly.

  The connection only works some time, usually only a few seconds before the connection is lost.
  After a few seconds or minutes the connection is restored, just soon to be lost again.

  Cannot download large files or even to see larger photos on normal web pages. Is there any Win8 driver for Broadcom coming 802.11n network card, or should I throw one 2.5 year old computer in the trash?

  Buy a usb-wlan card is not an option, as wireless mice is already "permanently" reserving one of the three usb ports and wlan card it would be just to the left...

  To my knowledge this L670 series isn t Win 8 taken in charge and this means that there is no special Win 8 drivers for this device, so I put t think you will find an another Win 8 driver for this WLan card.

  But do you really want to throw this laptop in the trash just because the wifi does not work properly running Win 8?
  The device was working properly under Win 7?

  I would recommend running a few Wlan test.
  For example; Disable wireless encryption on your router and Wifi connectivity with the open network do that just for testing purposes, perhaps you will need to change the type of encryption to test.

• Satellite P25-S520 - DVD player does not work properly

  Difficulty of DVD player or buy the external drive

  My DVD player does not work properly, in fact it can never work properly. Recently, I tried to back up my PC on a DVD using Norton 360. Norton did not recognize that the DVD was present. Then I tried to write a text file on a DVD and was a failure. DVD + R and DVD-R media were found to be (Maxwell 16 X).

  I could have probably lived with this however, I received a copy of Dragon NaturallySpeaking version 10 on a CD and my Toshiba would not recognize it. I tried the CD in my laptop nearby and it was recognized.

  An attempt to update the driver has also fails.

  I was able to copy a CD of music last night so that at least works properly.

  Does anyone know how can I fix? The important part is to be able to load my new program.

  Research on some forums I found that other people have had problems with the Pioneer drive. If the drive can't be fixed, I'm not adverse to buying an external DVD drive. Unfortunately, where I live there is no brick and mortar stores selling external drives and I prefer to avoid the hassle of getting a drive online and discovering that it does not work with my Toshiba. Can someone suggest an external USB drive that will read and write CD and DVD and is certain to be compatible with my Toshiba?

  Thanks for any help,
  Humbaba3000BC

  Satellite P25-S520
  PIONEER DVD - RW DVR-K12D
  Driver provider: Microsoft
  Driver date: 01/07/2001
  Driver version: 5.1.2535.0
  Digital signer: Microsoft Windows Publisher

  Any external USB CD/DVD drive will be compatible with your laptop.

  However, you won't be able to boot from CD (run recovery for example) If you are using an external drive.

  So, your best option would be to replace the internal drive with a Toshiba drive designed for the laptop. Call an ASP and request a quote.

• DV6 quick launch button mute does not work properly. He puts the speakers muted, but does not change color.

  Laptop quick launch mute my computer Pavilion dv6-1050us button does not work properly. He puts the speakers muted, but does not change color.  It's still orange, not mater if your speakers are on or off.   His other (white) State works because it is white to start windows, but then goes to orange and does not change when selected but by selecting the button speaker turn the speakers on and outside as it should.

  I've loaded and reinstalled the quick launch driver software (sp46731.exe), but the problem is still there.  The problem is about 2 weeks old.   Have not added any new software that I know.  But computer installs updates as received.

  Simon

  Hello

  First download the audio driver by using the links below and save the installer to your desktop.

  Audio driver - Windows 7

  Audio driver - Windows Vista

  Once the download is complete, right-click on the Setup program and select "Run as Administrator" to launch the installation - ignore the warnings that you can see everything that is an earlier version.  Once the installation is complete, restart the laptop.

  Kind regards

  DP - K

• HP windows vista laptop webcam does not work properly please help?

  HP pavilion dv6707us webcam does not work and its not detected in everything that I use it in please someone help me ive been looking around and it was working fine until I did the updates of windows please, it's a hp laptop windows vista 64 bit?

  Hi JohnnBoyyy,

  1. you receive messages or error codes?

  Given that the problem started after installing the windows updates, you can check the updates of windows for optional updates for the webcam.

  For more information, see the article:

  Install Windows updates

  You can also check the HP website and try to update the latest version of the drivers for the webcam and check.

  Software downloads & Driver - HP Pavilion dv6707us laptop

  Updated a hardware driver that is not working properly

  Hope this information is useful.

• My laptop HP keyboard does not work properly.

  My laptop HP keyboard does not work properly. First of all, it makes a clicking dull when I type, second if I type (anywhere) it wont let me repeat a letter or any key back to back with waiting 2 + seconds. It comes with the connected keyboard or a usb keyboard. How can I stop this?

  In the Panel-> Accessibility-> make your computer easier to use-> make the keyboard easier to use, check your filter keys, if it is on, turn it off.

• This device does not work properly because Windows... this device. (Code 31)

  Hello buddies, how to solve this problem (code 31)

  USB does not work on my PC, I found that it was the problem of the unit. and he wrote that this device does not work properly because Windows cannot load the drivers required for this device. (Code 31).

  How can I solve this problem?

  In addition, you can check the following registry key? :

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ (36FC9E60-C465-11CF-8056-444553540000)

  Is there a 'name' UpperFilters and LowerFiltersin the registry for this key, in the right window?

  If so, what is 'Data' for these names?