Gateway GT5432 hangs on start upand launch Startup Repair

Similar Questions

• Launch Startup Repair does not work

  Hi, the 'Launch Startup Repair' option does nothing for my installation of Windows 7 64-bit edition.  If I select the screen simply refreshes and presents me with the same two options - Launch Startup Repair and start Windows normally.  It's as if something prevents me to attempt any repair solution.  Anyway, which would cause Launch Startup Repair does not have to work.  Thanks if someone can advise.

  Hi, the 'Launch Startup Repair' option does nothing for my installation of Windows 7 64-bit edition.  If I select the screen simply refreshes and presents me with the same two options - Launch Startup Repair and start Windows normally.  It's as if something prevents me to attempt any repair solution.  Anyway, which would cause the launch startup repair does not work.  Thanks if someone can advise.

  Hello

  It may be damaged.

  If you have problems with the use of the built-in repair software:

  Make your own information system repair disc in this tutorial:

  "How to create a Windows 7 system repair disc"

  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  "This will show you how to create a system repair disc Windows 7 to be able to use to start the system recovery options to help recover your Windows 7 installation, if you have not a Windows installation disk, can't find your Windows installation disc or can not access the recovery options provided by your computer manufacturer.

  A system repair disc is not able to install Windows 7.

  Note

  If you are unable to start your Windows 7 to create a Windows 7 system repair disc, and then you could create on another computer for use on your computer. »

  _____________________________________

  Then, use this disk for System Recovery Options:

  "System recovery options".

  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  "How to run a startup repair in Windows 7"

  http://www.SevenForums.com/tutorials/681-startup-repair.html

  See you soon.

• Vista won't start and the startup repair can't find any problems

  Have a Dell Inspiron under Vista 64 bit, which does not start. I have inserted the re installation DVD and ran the Startup Repair which could not detect a problem.

  Diagnosis and repair are the following

  ----------------------

  Managed last start: 2010-10-23 21:12:44 (GMT)

  Number of repair attempts: 1

  Details of the session

  -------------------------------

  System disk = \Device\Harddisk0

  Windows directory = C:\Windows

  AutoChk run = 0

  Number of root causes = 1

  Test performed

  ------------------------------

  Name: Search for updates

  Result: Completed successfully. Error code = 0 x 0

  Take time = 0ms

  The test is performed:

  ------------------------------------

  Test the disc name: System

  Result: Completed successfully. Error code = 0 x 0

  Taking time = 0ms

  Name: Troubleshooting disk

  Result: Completed successfully. Error code = 0 x 0

  Time taken = 218ms

  The test is performed:

  ------------------------------------

  Name: Metadata for the drive Test

  Result: Completed successfully. Error code = 0 x 0

  Time taken = 62ms

  The test is performed:

  ------------------------------------

  Names OS test target

  Result:

  Completed successfully. Error code = 0 x 0

  Taking time = 188ms

  The test is performed:

  ------------------------------------

  Name: Checking content Volume

  Result: Completed successfully. Error code = 0 x 0

  Time taken = 140ms

  The test is performed:

  ------------------------------------

  Name: Diagnostic Boot manager

  Result: Completed successfully. Error code = 0 x 0

  Taking time = 78ms

  The test is performed:

  ------------------------------------

  Name: Diagnostic log for the system startup

  Result: Completed successfully. Error code = 0 x 0

  Taking time = 16ms

  The test is performed:

  ------------------------------------

  Name: event log diagnosis

  Result: Completed successfully. Error code = 0 x 0

  Time taken = 530ms

  The test is performed:

  ------------------------------------

  Rated: Internal audit of State

  Result: Completed successfully. Error code = 0 x 0

  Taking time = 0ms

  The test is performed:

  ------------------------------------

  Name: Start-up condition Test

  Result: Completed successfully. Error code = 0 x 0

  Taking time = 0ms

  Root cause found:

  -----------------------------

  State of the start indicates that the OS booted successfully

  But the laptop still wont start I tried to run chkdsk/r from the command line and was unable to do as he says Windows cannot run disk checking on this volume, because it is write protected. I don't know what to do now anyone no matter what ideas thanks in advance.

  Seems odd. Startup Repair should have solved the problem.

  Have you tried new reboot running?

  Give it a shot...

  Any chance that you have a "backup computer?

  Try to do a full restore of the PC.

  See how it goes...

  Man is the only animal that laughs and cries; because it is the only animal that is struck by the difference between what things are and what they should be.

• What should I do if my windows does not start, and the Startup Repair is not help at all

  So today, I went and when I turned on my computer from sleep mode, it was perfectly fine.  I was watching a video, surf on internet and MSN messenger when my computer froze all of a sudden.  I waited for release, but it didn't.  Given that I could not turn off the computer either, I had no choice but to disconnect it from the computer.  However, later, when I tried to restart, the screen would go black after the black loading screen.  Subsequently, it would just restart and startup repair would begin.  I tried to restore Systen and ran several times startup repair.  In addition, it does not even boot mode safe.  Here are the details of the problem for the Startup Repair:
   
  Problem event name: Startup repairV2

  Signature of the problem 01: AutoFailover

  Prob Sig 02: 6.0.6001.18000.6.0.6001.18000

  Prob Sig 03:5

  Prob GIS 04:393220

  Prob Sig 05: NoRootCause

  Prob Sig 06: NoRootCause

  Prob GIS 07:0

  Prob GIS 08: 1

  Prob Sig 09: SystemRestore

  
  Prob GIS 10:0

  OS version: 6.0.6001.2.1.0.256.1
  Local ID: 1033

  Please help me find a way to restart the computer without having to reinstall Windows because I don't have a back-uped none of my files, so I would lose everything...

   
  Thank you
  Jeremy

  Hello

  ·         How have you tried to do system restore?

  I recommend you to restore system using a Windows Vista DVD.

  Here's how:

  To open the Options menu system recovery using a system repair disc or a Windows Vista installation disc

  If your system is damaged and cannot access the menu system on your computer Recovery Options, you can access it using the Windows Vista installation disc or a system repair disc previously.

  To use this method, you need to restart (boot) your computer using the disk.
  1 insert the disc.
  2. restart your computer using the power button on the computer.
  3. If you are prompted, press any key to start Windows from the installation disc.
  If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer.

  4. choose your language settings, and then click Next.
  5. If you are using the Windows installation disc, click on repair your computer.
  6. Select the Windows installation you want to repair, and then click Next.
  7. in the System Recovery Options menu, click a tool to open it.

• Vista does not start, fails to Startup Repair indicating that the version of the operating system is incompatible with Startup Repair tool

  I use a laptop Dell XPS M1330, under Vista Home Premium 32 Bit. The laptop froze, I tried to do a system restore, which did not work. Now the laptop goes into startup each time put on repair. A message window appears saying "Startup Repair cannot repair the computer automatically. Startup Repair window says "Startup Repair could not detect a problem. Diagnostics details say: Root cause found: the operating system version is incompatible with Startup Repair tool.

  I tried to use the Dell Factory Image Restore to restore the system, but it does not end. I get an error message instead. There is no details, it's just a small window with an X and the Word error.

  I also tried to use resettlement Dell DVD, but that doesn't seem to work either.

  Vista does not start at all, not in either safe mode.

  I just ran to the Dell Diagnostics tool, and that is to say that the integrity test of memory has failed... No idea how to solve this problem?

  I'm at a loss and helps woukld be appreciated.

  Hi James,

  Ø are you using the correct version of the Vista disc to run Startup Repair?

  I suggest to run the diagnostic tool memory WINRE mode and check if the memory (RAM) installed on the computer works fine.

  Follow the steps below to start the computer using the WINRE and run the memory diagnostic tool.

  A. Insert the Windows Vista installation disc.

  B. restart your computer.

  C. Si you are prompted, press any key to start Windows from the installation disc.

  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.

  D. choose your language settings, and then click Next.

  E. click on repair your computer.

  F. Select the operating system you want to repair, and then click Next.

  G. in the menu system, SelectMemory diagnostic tool Recovery Options.

  Once scanning is complete, check to see if the problem is resolved.

  Access the link below to learn more about Windows recovery options in Windows Vista.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-know-if-my-computer-has-a-memory-problem

  If you have several sticks of RAM installed on the computer, you can try to remove one of the RAM stick and check if it works very well. Also, you try to exchange the RAM sticks and check if one of the RAM is originally this issue and if it needs to be replaced.

  Note: If you are not aware of the evolution and swaping the stick of RAM on the computer, it is best to contact the computer manufacturer for help on this and you can do it at your own risk.

  You can also contact Dell support and check if you need to replace any hardware.

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista will not start and the Startup Repair boots in a blue screen of death. Why?

  I select run a startup repair, and it goes straight to the blue screen. When I start normally it justs sits there with the bar go green around and around. System Restore also dosen't help. I can boot into safe mode, but I don't know of other programs of Diagnostics. In addition, no virus. HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!

  Read the posts by spirit MVP in the following thread on the Blue Screen of Death.  They should help you solve your problem. http://social.answers.microsoft.com/Forums/en-US/vistahardware/thread/8cd8362e-7d06-46fb-afd7-84d54b6a8ea7.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot start windows using Startup Repair

  I have a Hp Mini 2100-2190NR running windows 7.

  I have a black screen with a underscore on the top left of the page problem. I'm trying to fix it using a repair of windows 7 USB key.

  I'm following these steps below so he can help me to solve this problem:

  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  I am able to load the system recovery options and do a system repair. I did repair the system several times, but he said repair of the system could not detect any problems. It says to contact the system administrator or the manufacturer of the computer for help. After that, I restart my computer but still cannot log on windows.

  What can I do? I need help with this problem. I don't want to do a factory reset.

  Hello

  One again, boot from USB of new aid, select repair your computer and choose the command prompt.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  DiskPart

  list disk

  Select disk 0

  partition from the list

  Select partition 1

  assets

  output

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the Rescue USB and try to restart the laptop.

  Kind regards

  DP - K

• Windows 7 does not start; Startup Repair won't work; Know last good configuration will not work

  Windows 7 64 bit machine. Automatic Windows updates were installed during the night; has started acting strangely this afternoon.  After an attempt to re-start, got the "Windows Error Recovery" screen with the "Windows did not start. A recent message HW or SW change might be the cause".  When I try to 'Launch Startup Repair' a screen returns but just hangs.  When I try to "Start Windows normally", it brings back me to the Windows error recovery screen.  When I hit f8 for when you start to get the screen "Advanced Boot Options" and try to go into secure Mode or use the last good known Configuration option, each one brings back me to the Windows error recovery screen.

  Any ideas on how to get this resolved?  Thank you!!!

  Hello

  The problem is since it will not run the startup from the Windows 7 disc repair you then you
  need some kind of support, and the cause is likely to be material. A Dell thing you want to do
  is to restore the system back to the factory plug 'IF' possible so it would be a good idea to save the
  data before calling their (possible an another 'IF'). Try to put the hard drive in another computer
  as the 2nd disc (best method) or in an external case USB (less likely to work) and then copy
  data on removable media such as CD, DVD or other external USB drives.

  Good idea to check with the technical support Dell, their online documentation and the Dell forums where he
  perhaps others with the same problem.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  Other choices would be a real store of the computer performing the internal repairs (not the leeks and the glances at one
  Best Buy or other stores). Of course if she has any warranty Dell is the best choice, and
  can be in effect regardless of any warranty.

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Cannot start Windows and "Begin repair of launch" or "Start Windows normally" did not work.

  Original title: need help URGENT

  The normal Windows Vista (Home Premium 32 Bit) updated on my DELL INSPIRON laptop... Cannot start Windows

  'Launch Startup Repair' or 'Start Windows normally' did not work.

  What to do next without deleting my data? Thank you.

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  Data recovery, if required

  1. remove the hard drive and it slave in another computer

  2 buy or borrow a USB disk drive hard put in yout case then plug it into another computer and read the hard drive like this

  3. try Knoppix

  http://www.Knopper.NET/Knoppix/index-en.html

  BUT this method depends on your hardware in the computer that failed

• Windows Vista does not start. I tried to run the Startup Repair tool and we have tried to select start Windows normally.

  original title: URGENT

  How to start Windows Vista when 'Launch Startup Repair' or 'Start Windows normally' did not work? I want to avoid the deletion of my data.

  Hello

  for starters, the info you received a DVD of windows 7 repair vista usage are BAD

  you need a DVD vists or a vista Startup Repair disk repair vista

  and you can NOT do a repair installation of booting from a DVD in vista

  Repair facilities are on within an operating system

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  If necessary

  Data recovery

  1. remove the hard drive and it slave in another computer

  2 buy or borrow a USB disk drive hard put in yout case then plug it into another computer and read the hard drive like this

  3. try Knoppix

  http://www.Knopper.NET/Knoppix/index-en.html

  BUT this method depends on your hardware in the computer that failed

• HP Pavilion dv6 starts request at startup startup normally or repair problem

  Hello, HP Pavilion dv6 starts to start normally or Startup Repair request. Results of normal boot BSOD too fast to read.

  Startup Repair in execution, but 13 hours still not repaired. What should I do? My computer knowledge is poor in good conditions, but I'm at the point of turning into an expensive Frisbee. The fact that I have to use this UM netbook that will soon be a Frisbee is driving me crazy!

  It's a venerable laptop purchased Feb 2010. It is a Pavilion DV6 (model DV6-2005-TX) running windows 7 Home premium (32 bit) and updates only did a request from Microsoft, so are a lot of patches and fixed security.

  Help will be very humbly and grovellingly welcome.

  Hello

  The error code is different from the first, it is still a short drive self test failed and confirms that the drive must be replaced.

  A brief overview of how to replace the hard drive is detailed below.

  The player at the link below is an example of one that would be perfect for your laptop.

  Hard drive 500 GB

  The procedure to replace the hard drive begins on Page 53 of your & Maintenance Guide.

  Once this is done, simply use your recovery DVD to reinstall the operating system on the new drive - this is described in the document of HP here.

  If you do not have your recovery discs, you can order a replacement set using the link below.

  Order HP recovery disks.

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• Computer turns on but does not boot to Windows, startup repair does not work

  When I turn on my laptop, it brings me to a screen titled "Windows Error Recovery" which means the following:

  "Windows did not start.  A recent hardware or software change might be the cause. »

  He asks me if I want to '(recommended) launch Startup Repair' or 'Start Windows normally'.

  When I select repair system, the screen turns off for half a second only and brings back me to the exact page as I was already on.

  When I select "Start Windows normally", he brings me to the loading screen that usually starts with Vista (anyone who says (c) Microsoft Corporation), except that it never stops loading.  I left for hours, and he was still on the same screen.

  I have a laptop Dell Inspiron 1525 with a processor Intel Core 2 Duo and Windows Vista Basic.

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Dell recovery options:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  See you soon

  Mick Murphy - Microsoft partner

• Does not work Vista startup repair cannot repair, System Restore cannot repair.

  I have a Dell Inspiron with Windows Vista. On commissioning, it is said: "Windows could not start. A recent hardware or software change might be the cause. "then offer to 'Launch Startup Repair' or 'start Windows normally '.

  When asked to boot normally, it tries to start, but broken, return back to this page.
  When he was asked to run the Startup Repair, it opens the program scans the system for several minutes and then says "Startup Repair cannot repair this computer automatically.

  When we click on diagnostics and repair details, it is said:

  "Last startup successfully: 03/10/2011 15:42:52.
  Number of repair attempts: 8

  Details of the session
  Drive system = \Device\Harddisk
  Windows directory = C:\Windows
  AutoChk run = 0
  Number of root causes = 1

  The test is performed:
  Name: Search for updates
  Result: Completed successfully. Error code = 0 x 0
  Name: Drive for System Test
  Result: Completed successfully. Error code = 0 x 0
  Name: Troubleshooting disk
  Result: Completed successfully. Error code = 0 x 0
  Name: Metadata for the drive Test
  Result: Completed successfully. Error code = 0 x 0
  Name: Target OS Test
  Result: Completed successfully. Error code = 0 x 0
  Name: Checking content Volume
  Result: Completed successfully. Error code = 0 x 0
  Name: Diagnostic Boot manager
  Result: Completed successfully. Error code = 0 x 0
  Name: Diagnosis of the system startup log
  Result: Completed successfully. Error code = 0 x 0
  Name: event log diagnosis
  Result: Completed successfully. Error code = 0 x 0
  Rated: Internal audit of State
  Result: Completed successfully. Error code = 0 x 0

  Root cause found:
  Startup Repair tried several times but still not determine the cause of the problem. »

  If not, we can look at the advanced settings:
  System Restore = "no restore point created the disk of your computer system. To create a restore point open System Protection.
  Windows complete PC Restore = "a valid backup location is not found. Windows cannot find a backup on this computer. »
  = Windows Memory Diagnostic tool does not solve anything when parsing
  Command prompt
  Reference Dell Factory Image Restore = not tried but am avoiding wiping all your own hard drive for as long as possible...

  He's not in Mode safe, and I don't know what is happening. It happened when I shut it down (holding the power button down) update that it had frozen.
  What should I do? Thank you.

  Hello

  Method 1: I suggest that you do the startup repair using the Windows Vista installation disc and check if it works.

  If you have a Windows Vista installation disc, you need to restart (boot) your computer using the installation disc. If you do not restart your computer from the disk, the option to repair your computer will not appear.

  a. Insert the installation disc.

  b. restart your computer.

  Click the Start button, click the arrow next to the button lock and then click on restart.

  c. If prompted, press any key to start Windows from the installation disc.

  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.

  d. choose your language settings, and then click Next.

  e. click on repair your computer.

  f. Select the operating system you want to repair, and then click Next.

  g. in the System Recovery Options menu, click Startup Repair.

  See: How can I fix a startup (startup)?

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem

  Method 2: If above method fails, then run the command chkdsk WinRE (Windows Recovery Environment) and check if it solves the problem:

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Note: Select command prompt from the system recovery options and follow the mentioned below as follows:

  Type the following command and press ENTER.

  Chkdsk /r

  Note: Chkdsk /r command erases / corrupted hard disk data corrections. Some of your personal files/data may be erased.

• Windows Vista Service Pack 2 and Startup Repair prevent my laptop to turn on.

  My laptop is running slow so I thought that I would need to update something. It suggested that Windows Vista Service Pack 2 so I started to update, but I remembered that my previous laptop was having problems with Windows Vista Service Pack 2 so I canceled the update.
  I then turned off my laptop later and now when I turn it on it goes to 'Launch Startup Repair', I have let this happen, but can not solve a problem.
  I then tried "Start Windows normally", but it goes back to restart and on-screen 'launch Startup Repair '.
  Then I tried to boot into 'Safe Mode' = nothing
  I tried restoring the system but there is no date available, and he said something like "there is no diagnostic tool.
  I don't know what I can do!

  Hi carlywray,

  Your computer came with Windows Vista preloaded? If so, contact the manufacturer for the disk recovery or a method of recovery of your operating system. If you have purchased a full copy of Windows, see this Microsoft document.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Corrupt Windows files, startup repair does not, blockages when touching a certain area of computer

  Hello, I had a lot of problems with my computer.

  In the past months, if a tap some area of my computer when my computer is turned on, my computer has two answers to this. 1.) screen turning black but computer remaining on. Restart computer 2.). (This area is located to the left of my touchpad / touch area of my computer.)

  If I try to turn on my computer, the three "signs Lock" light on my computer and the icon of a cell tower. The screen remains black. So that my computer to turn back once again, I have to remove the battery for a few seconds and put back in.

  Recently, my computer wanted to check one of my disks for consistency. and on a different file each time, my computer is stuck on this one for a minute or two, then said the file file is unreadable / it is corrupt. It is then placed on the following, and the same thing again and again.

  Another problem is that some programs on my computer take a very long time to load, as well as tabs.

  Also, sometimes when I start my computer, he recommends that I launch startup repair. So I press on enter and it takes me to a screen that says basically that my OS is corrupted / not working properly.

  I tried to restore my computer to an earlier time, and when I do it gives me an error message saying something about Windows files is corrupt and cannot restore my computer to an earlier time before the problem is resolved.

  In the past, my computer had problems of heat fan.

  It also has a battery problem in which it loses its charge very quickly if not connected to a power source.

  I talked to a technician of the answer, and he gave me instructions to/on will my command prompt and try to create a new user account.

  On the first attempt, he told me to type the following: net user "Test" / Add

  The CMD response was that the password did not meet the requirements of the policy.

  Then he told me to try the following: ' user 'Test' net account / add ".

  The response was that «the system is not the specified path»

  Finally he told me to try the following: net user administrator / Active: Yes

  The answer was: "the user name was not found. More help is available by typing NET HELPMSG 2221.

  Technology reply told me that the problem was more complex than he thought and said he had to do a session of access on my computer. He told me about the tax of $149.99 and I told him that I couldn't do it.

  Now, I came to the community in the hope of help.

  Thank you for your help, it's greatly appreciated! :)

  News of the computer:

  Dell Latitude E5410

  Windows 7

  32 bit

  Processor i5

  KB, try the steps that apply to your operating system, in the links below.

  Use the System File Checker tool to repair missing or corrupted system files.

  https://support.Microsoft.com/en-us/KB/929833

  Difficulty of Windows Update errors by using the DISM tool or System update preparation tool.

  https://support.Microsoft.com/en-us/KB/947821

  Note: Download and run the "System Update Readiness Tool.