Gigabit Ethernet SX Mini-GBIC SFP Cisco transceiver

This reference Cisco: Cisco MGBSX1

Any type of connector can support?

And how can I change the type of connector of LC to SC?

Ho Yousovich, all GBIC SB is LC.

http://www.Cisco.com/c/en/us/support/docs/interfaces-modules/CWDM-GBIC-s...

Tags: Cisco Support

Similar Questions

Mini-GBIC/SFP and VLAN

I'll buy two switches Cisco SG200 - 26 with a TRANSCEIVER MGBSX1 for each and connect with each other via fibers. Am I right to assume that the fiber port is configurable for VLAN? So if I set up four VLANS (1-4 on two switches, port 1 in VLAN1, VLAN2 2 port, etc.), I can configure the fiber port to be on all four VLANS so that traffic for all four VLAN moves between the two switches?

Hi David, you're right.

-Tom
Please mark replied messages useful

Using mini gbic to stack 2 of SGE2010

Hello

Is there a major advantage to use the GBIC ports to superimpose on the regular ports of GB (24 and 48, I think?) in terms of performance, stability, etc.?

Thank you

Neil

Hi Neil,

So to answer the question quite simply, there is no additional benefit using mini GBIC (SFP) compared to a CAT6 cable to connect the switches in a stack. Copper fittings or fiberglass can be synced to 1000 Mb/s.

The only advantage of the use of mini-GBIC SFP or; s if the connection between the switches are more than 100 meters, or 328 feet.

But I'm more happy to connect switches with CAT6 cables for cumulation purposes, is it more cost-effective.

Best regards, Dave

AirPort Extreme, gigabit Ethernet switch and covering my house

I have an AirPort Extreme 802.11n to Time Capsule wireless router. I have an old House. It was built in 1852 and microwave ovens have a hard time penetrating through some walls.

Recently, I made some changes in the House and I wired things for Gigabit Ethernet. I have not yet bought a switch. We have a Mac Pro (cheese grater), a Mac Mini, three iPhones (only 6) and two iPads (one version 3 and the other, only the latter bought autumn, an iPad Air.)

First of all, since most of us are on 802.11 n, can I initially put in place a heterogeneous system with two routers wireless connected to themselves and to the Internet via a switch? Also, I need two switches; one for the internal LAN and the other for a connection to the Internet? I intend to buy the new ac 802.11 AirPort extreme for a facility in one of the rooms to better cover the rest of the House. I think that both devices will be able to take advantage of the signal of 5 GHz, initially, with another iPad and iPhone to come along the next year. I wouldn't or the other base station being "enslaved" to the other but, rather, connected to the wired network internal and devices just switch between them that move around the House.

Comments are welcome here. This can be a trip to a Genius Bar if I do not hear from final here.

can I initially put in place a heterogeneous system with two routers wireless connected to themselves and to the Internet via a switch?

Possibly, depending on the type of modem you have. See below info in this post.

Also, I need two switches; one for the internal LAN and the other for a connection to the Internet?

NO.

I wouldn't or the other base station being "enslaved" to the other but, rather, connected to the wired network internal and devices just switch between them that move around the House.

Not sure what you mean here. The two extremes of the airport will be connected to the cable network, so they will be in communication with them at all times. If you want to peripheral switch between them that move around the House... then you will need what is called a "mobile network"... so the two airports will produce a wireless signal that uses the same wireless network name. Apple Setup Assistant will put things this way by default.

Depending on the type of "modem" you have, the network might look like this:

Internet > Modem > AirPort Extreme 802.11ac > Ethernet switch > AirPort Extreme

or, if your "modem" is really a modem/router, also known as, a walkway... then you have the ability to set things up like this:

Internet > Modem/Router > Switch > the two airports to connect to the Ethernet network

Looking for a Gigabit Ethernet switch to your network. Switches come in 5 ports, 16 channels, 8 ports, etc. versions. It's always a good idea to buy an Ethernet switch over a few ports that you think that you may need right now... to allow for expansion.

The key here is that the type of modem you have will determine how to configure the network. If you could provide the number of brand and model of your "modem", we can eliminate some of the assumptions to be used at this time.

HP Pavilion dm4-2070us: network adapter Atheros AR8151 PCI - E Gigabit Ethernet Controller Driver Windows 10 Qualcomm

Network adapter Atheros AR8151 PCI - E Gigabit Ethernet Controller Driver Windows 10 Qualcomm
Options
10/11/2015-12:08 AM
Product name: HP Pavilion dm4-2070us
Operating system: Microsoft Windows 10 (64-bit)
Laptop: HP Pavilion dm4-2070us OS: Windows 64-bit 10

Problem with the Qualcomm Atheros AR8151 PCI - E Gigabit Ethernet Controller driver network card driver does not not on Windows 10

I've had this laptop for the past 3 years, running on Windows 7 very well, but a few weeks ago, that I've upgraded to Windows 10 when the Wired internet connection stopped working. Whenever I connect the Ethernet cable in the network settings, it says 'Unidentified network' "no internet access. I tried updating the driver, uninstall and reinstall the driver, call Microsoft to help but nothing seems to work. And there is no update driver for Windows 10 on hp.com is a solution for this problem? Help, please.

Hi Mrstenter,

The link (atheros.cz) you provided has the same problem. However, I found solutionon the below mentioned link. He was the pilot I needed and it worked! No both my cable and internet connections don't work.

SOLUTION: Downloaded the driverscape.com driver, double-click to open, double-click on the appliction of installation file, select the option repair the installation, and then follow the prompts. Restart the computer after installation. Mine worked.

Thank you very much for your help.

http://www.driverscape.com/download/Qualcomm-Atheros-ar8151-PCI-e-Gigabit-Ethernet-controller-%28ndis-6.30%29

UCS-C210-M2 on the problem of gigabit ethernet ports.

I have 2 x C210 M2 with 2 mother board gigabit ethernet ports and 4 gigabit ethernet ports on a PCI card ports.

PCI 4 port cards work fine.

On the 2 ports on the motherboard, I have a problem with ESXi 4.1:

My 2 ports is auto-negotiation and on the vsphere client speed and duplex of the ports are always displayed correctly.

The switch network where the server is connected is a C-3560.

I use this server for Unified Communications, one I see the problem on downloading large files.

With a virtual machine connection of the unit, when I want to download a file of locale (language file - 650 MB to 1 GB)

The download progress is displayed in MB and it progresses very slowly as 1 MB every many seconds.

Whereas, when I use a map PCI 4 port gigabit port, I can see the progression to go at a speed of tens of MB in the same period.

The only way to have growth to proceed more quickly with the 2 on the main Board gigabit ports, is to set the speed of the 3560 switch

10 Mbps and half duplex. In this case, when we look at the client vsphere, the gigabit on the server port negotiates to 10 MB - half Dupl.

and the progress is constant and much faster that it is at this time to 1000 Gb/s Full Dupl.

Someone has an idea.

My CIMC firmware version is 1.4.1 and I run ESXi 4.1.0

Concerning

Marc - CCIE 2700

Hello Mark,

LRO of ESXi feature works well with the Linux kernel (depending on the version of UC apps, they rest RHEL 4.7 / RHEL 5.5)

Try to turn off RSO on ESXi and check the transfer rate.

http://docwiki.Cisco.com/wiki/Disable_LRO

HTH

Padma

SGE2000 - what mini-GBIC

Hello

I want to know who can be used mini-GBIC works with the switch SGE2000. Also 10/100-mini-Gbic work for?

Best regards

Linksys 100 M SFP switch Support and software output Minimum requirements Table
For SR SRW, EMS, EMS and switches SLM


Switching products	MFEBX1	MGBBX1	MGBLH1	MGBLX1	MGBSX1	MGBT1	MFELX1-100 FPS	MFELX1-100 FPS	Comments (MFELX1 & MFELX1)
SR2024	N/A	N/A	Auto	N/A	Auto	Auto	SUPPORT NO	SUPPORT NO	Plan No. material Limitation in support
SR224G	N/A	N/A	Auto	N/A	Auto	Auto	SUPPORT NO	SUPPORT NO	Plan No. material Limitation in support
SRW208G	Auto	Auto	Auto	Auto	Auto	Auto	Minimum Firmware 1.0.3	Minimum Firmware 1.0.3	Automatic 100 M SFP
SRW208L	Auto	Auto	Auto	Auto	Auto	Auto	Minimum Firmware 1.0.3	Minimum Firmware 1.0.3	Automatic 100 M SFP
SRW208P	Auto	Auto	Auto	Auto	Auto	Auto	Minimum Firmware 1.0.3	Minimum Firmware 1.0.3	Automatic 100 M SFP
SRW208MP	Auto	Auto	Auto	Auto	Auto	Auto	Minimum Firmware 1.0.2	Minimum Firmware 1.0.3	Automatic 100 M SFP
SRW2008	Auto	Auto	Auto	Auto	Auto	Auto	Minimum Firmware 1.0.2	Minimum Firmware 1.0.3	Automatic 100 M SFP
SRW2008P	Auto	Auto	Auto	Auto	Auto	Auto	Minimum Firmware 1.0.2	Minimum Firmware 1.0.3	Automatic 100 M SFP
SRW2008MP	Auto	Auto	Auto	Auto	Auto	Auto	Minimum Firmware 1.0.2	Minimum Firmware 1.0.3	Automatic 100 M SFP
SRW224G4 (v1.0/v1.1)	Auto	Auto	Auto	Auto	Auto	Auto	Minimum firmware 1.2.2	Minimum firmware 1.2.2	Manual installation for 100M SFP (Click here for Instructions)
SRW248G4 (v1.0/v1.1)	Auto	Auto	Auto	Auto	Auto	Auto	Minimum firmware 1.2.2	Minimum firmware 1.2.2	Manual installation for 100M SFP (Click here for Instructions)
SRW224G4P	Auto	Auto	Auto	Auto	Auto	Auto	Minimum Firmware 1.0.1	Minimum Firmware 1.0.1	Automatic 100 M SFP
SRW248G4P	Auto	Auto	Auto	Auto	Auto	Auto

Minimum Firmware 1.0.1

Automatic 100 M SFP

SRW2024P

Auto

Minimum Firmware 1.0.3

Automatic 100 M SFP

SRW2016

Auto

SUPPORT NO

Plan No. material Limitation in support

SRW2024

Auto

SUPPORT NO

Plan No. material Limitation in support

SRW2048

Auto

SUPPORT NO

Plan No. material Limitation in support

SRW224P

Auto

SUPPORT NO

Plan No. material Limitation in support

SFE2000

Auto

SUPPORT NO

Plan No. material Limitation in support

SFE2000P

Auto

SUPPORT NO

Plan No. material Limitation in support

SGE2000

Auto

SUPPORT NO

Plan No. material Limitation in support

SGE2000P

Auto

SUPPORT NO

Plan No. material Limitation in support

SLM224G2

Auto

Minimum Firmware 1.0.2