Global Service - Reetrant

Similar Questions

• Phone call Platnum Global Services

  Received several phone calls from Platnum Global services. I refused to allow any "service" to my PC

  until I got a phone number vfrom call - back.  The number was not a toll-free number.

  Provided the number was321 200-0107 and said to be in California, to find errors sent to

  Windows. The Web site, they said that correct is... link... note indicative of North Carolina...

  http://platinumglobalservices.com/

  Hello

  "to find errors sent to Windows.

  There are NO errors sent to anyone.

  It's a scam.

  It is general guidance for this type of "cold" calls.

  Either these so-called "Microsoft" Tech companies want to sell you a worthless software, or remote access to your computer to try to steal your credit card and bank information and also achieve an identity theft on you.

  If you gave them remote access and you do Internet banking, contact your bank, to explain, and change passwords.

  If you use your online credit card, cancel and get a new one issued to you.

  And the only way that willl you know that you are free to them is to backup your data and do a clean install of your operating system.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And Microsoft does not contact you unless YOU have made prior arrangements with them to do.

  There is an article in the link I'm you provide at the end of this one

  Read this Information from Microsoft:

  "Avoid scams to phone for tech support.

  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  Don't be fooled of unsolicited calls. Don't provide personal information.

  Here are some of the organizations that cyber criminals claim to come:

  • Helpdesk Windows

  • Windows repair center

  • Microsoft technical support

  • Microsoft technical support

  • Windows Support Group Technical Department

  • Microsoft Research and Development Team (team of Microsoft R & D)

  See you soon.

  .

  p.s. Great these crooks use other people legitimate Web site URL into their scam.

• Portlets global services control

  Hi, I'm creating my view using global services. I thought to use the portlet control who appears in most of the default views (summary etc). Is it possible to do? If so, how can use control of portlet to add my own data to my overall opinion about thanks in advance.

  Sorry, that is not available in the SDK as a stand-alone control control of portlets.

• UCS Central - model of political profile of Global Service with Local SAN Boot

  Hello

  I created a profile Service Global UCS central template to create the ESX Service profile for servers 5 different area of UCS.

  The majority of addresses is assigned in the world i.e. addresses MAC, UUID, etc with the exception of the WWPN where local teams of SAN want to pre-configure the zoning for a defined block of addresses WWPN.

  I intend to use the ID range Qualification policy to assign a block of addresses WWPN to a specific area of UCS, but my main concern is around the creation of Boot SAN policy. As we intend to use the same model of Service Global profile for 5 different areas SAN Boot targets will have to be different.

  Any way to locate startup SAN strategy so I can have only one UCS Global local SAN Boot targets?

  Thank you very much, Paul

  Hi Paul,.

  What you're looking for, it's what we call a 'Boot target Alias', that should work much in the same way that VLAN alias work with UCS 1.1 Central.     Made senior level policy reference to the 'alias', but the actual link (some VLAN or target of Boot or...) will be specific field/DomainGroup and will not be resolved until the SP is associated with a session on a given field.     In the case of prime targets, this would allow for the same Global SP model to be used in several DomainGroups, while the actual target of Boot will vary according to the individual DomainGroup.

  Unfortunately, this feature is not in UCS 1.1 Central.   We have it on the list of features 'high priority' to point 1.2.

  The only 'solution' is to use several global models of the SP, whose name and attributes reflect the underlying objective of SAN-Boot - even if this creates models of N * M (N = # Gech/s;) M = bays of Boot # SAN).

  Hope this helps to enlighten us.    See you soon,.

  -Jeff

• Errors when starting the samples global services in server Virgo

  After you have imported the Global View UI sample and service, by adding them to the server list of these errors:

  [17:42:25.522 2013-01-11] [INFO] 2 - 127.0.0.1 < ME0003I > connection TCP Dump "C:\ProgramData\vmware\vSphere Client\serviceability\dump\2013-01-11-17-42-507 Web" generated
  [17:42:25.538 2013-01-11] [ERROR]  Installation 2 - 127.0.0.1 < DE0002E > TCP connection to "com.vmware.samples.globalviewui" in release ' 1.0.0' has failed. "org.eclipse.virgo.kernel.osgi.framework.UnableToSatisfyBundleDependenciesException: unable to satisfy dependencies of the package 'com.vmware.samples.globalviewui' to release ' 1.0.0 ': could not resolve: com.vmware.samples.globalviewui
  Report of resolver:
  A Package Import could not be resolved. Caused by the constraint missing bundled < com.vmware.samples.globalviewui_1.0.0 >
  constraint: Import-Package: com.vmware.vise.messaging.remoting; version = "0.0.0" >
  A Package Import could not be resolved. Caused by the constraint missing bundled < com.vmware.amfext_1.0.0 >
  constraint: Import-Package: com.vmware.vise.data.query; version = "0.0.0" >

  at org.eclipse.virgo.kernel.install.pipeline.stage.resolve.internal.QuasiResolveStage.process(QuasiResolveStage.java:45)
  at org.eclipse.virgo.kernel.install.pipeline.internal.StandardPipeline.doProcessTree(StandardPipeline.java:62)
  at org.eclipse.virgo.kernel.install.pipeline.internal.CompensatingPipeline.doProcessTree(CompensatingPipeline.java:72)
  at org.eclipse.virgo.kernel.install.pipeline.stage.AbstractPipelineStage.process(AbstractPipelineStage.java:41)
  at org.eclipse.virgo.kernel.install.pipeline.internal.StandardPipeline.doProcessTree(StandardPipeline.java:62)
  at org.eclipse.virgo.kernel.install.pipeline.stage.AbstractPipelineStage.process(AbstractPipelineStage.java:41)
  at org.eclipse.virgo.kernel.deployer.core.internal.PipelinedApplicationDeployer.driveInstallPipeline(PipelinedApplicationDeployer.java:285)
  at org.eclipse.virgo.kernel.deployer.core.internal.PipelinedApplicationDeployer.doInstall(PipelinedApplicationDeployer.java:164)
  at org.eclipse.virgo.kernel.deployer.core.internal.PipelinedApplicationDeployer.install(PipelinedApplicationDeployer.java:136)
  at org.eclipse.virgo.kernel.deployer.core.internal.PipelinedApplicationDeployer.deploy(PipelinedApplicationDeployer.java:203)
  at org.eclipse.virgo.kernel.deployer.management.StandardDeployer.deploy(StandardDeployer.java:52)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at com.sun.jmx.mbeanserver.ConvertingMethod.invokeWithOpenReturn(ConvertingMethod.java:167)
  at com.sun.jmx.mbeanserver.MXBeanIntrospector.invokeM2(MXBeanIntrospector.java:96)
  at com.sun.jmx.mbeanserver.MXBeanIntrospector.invokeM2(MXBeanIntrospector.java:33)
  at com.sun.jmx.mbeanserver.MBeanIntrospector.invokeM(MBeanIntrospector.java:208)
  at com.sun.jmx.mbeanserver.PerInterface.invoke(PerInterface.java:120)
  at com.sun.jmx.mbeanserver.MBeanSupport.invoke(MBeanSupport.java:262)
  at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:836)
  at com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:761)
  at javax.management.remote.rmi.RMIConnectionImpl.doOperation(RMIConnectionImpl.java:1454)
  to javax.management.remote.rmi.RMIConnectionImpl.access$ 300 (RMIConnectionImpl.java:74)
  to javax.management.remote.rmi.RMIConnectionImpl$ PrivilegedOperation.run (RMIConnectionImpl.java:1295)
  at javax.management.remote.rmi.RMIConnectionImpl.doPrivilegedOperation(RMIConnectionImpl.java:1387)
  at javax.management.remote.rmi.RMIConnectionImpl.invoke(RMIConnectionImpl.java:818)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:303)
  to sun.rmi.transport.Transport$ 1.run(Transport.java:159)
  at java.security.AccessController.doPrivileged (Native Method)
  at sun.rmi.transport.Transport.serviceCall(Transport.java:155)
  at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:535)
  to sun.rmi.transport.tcp.TCPTransport$ ConnectionHandler.run0 (TCPTransport.java:790)
  to sun.rmi.transport.tcp.TCPTransport$ ConnectionHandler.run (TCPTransport.java:649)
  to java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (ThreadPoolExecutor.java:886)
  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:908)
  at java.lang.Thread.run(Thread.java:662)

  [17:42:25.554 2013-01-11] [ERROR]  Installation of 2 - 127.0.0.1 < DE0003E > TCP connection failed for 'com.vmware.samples.globalviewui' in ' 1.0.0 version".
  [17:42:25.554 2013-01-11] [ERROR]  TCP connection 2 - 127.0.0.1 < DE0500E > cannot install the application of URI "file:/C:/VMware/vSphereWebClient/server/stage/globalview-ui.war". "Cannot satisfy the constraints of in 'com.vmware.samples.globalviewui' release ' 1.0.0 '. Impossible to solve: com.vmware.samples.globalviewui
  Report of resolver:
  A Package Import could not be resolved. Caused by the constraint missing bundled < com.vmware.samples.globalviewui_1.0.0 >
  constraint: Import-Package: com.vmware.vise.messaging.remoting; version = "0.0.0" >
  A Package Import could not be resolved. Caused by the constraint missing bundled < com.vmware.amfext_1.0.0 >
  constraint: Import-Package: com.vmware.vise.data.query; version = "0.0.0" >
  . "org.eclipse.virgo.kernel.osgi.framework.UnableToSatisfyBundleDependenciesException: unable to satisfy dependencies of the package 'com.vmware.samples.globalviewui' to release ' 1.0.0 ': could not resolve: com.vmware.samples.globalviewui
  Report of resolver:
  A Package Import could not be resolved. Caused by the constraint missing bundled < com.vmware.samples.globalviewui_1.0.0 >
  constraint: Import-Package: com.vmware.vise.messaging.remoting; version = "0.0.0" >
  A Package Import could not be resolved. Caused by the constraint missing bundled < com.vmware.amfext_1.0.0 >
  constraint: Import-Package: com.vmware.vise.data.query; version = "0.0.0" >

  at org.eclipse.virgo.kernel.install.pipeline.stage.resolve.internal.QuasiResolveStage.process(QuasiResolveStage.java:45)
  at org.eclipse.virgo.kernel.install.pipeline.internal.StandardPipeline.doProcessTree(StandardPipeline.java:62)
  at org.eclipse.virgo.kernel.install.pipeline.internal.CompensatingPipeline.doProcessTree(CompensatingPipeline.java:72)
  at org.eclipse.virgo.kernel.install.pipeline.stage.AbstractPipelineStage.process(AbstractPipelineStage.java:41)
  at org.eclipse.virgo.kernel.install.pipeline.internal.StandardPipeline.doProcessTree(StandardPipeline.java:62)
  at org.eclipse.virgo.kernel.install.pipeline.stage.AbstractPipelineStage.process(AbstractPipelineStage.java:41)
  at org.eclipse.virgo.kernel.deployer.core.internal.PipelinedApplicationDeployer.driveInstallPipeline(PipelinedApplicationDeployer.java:285)
  at org.eclipse.virgo.kernel.deployer.core.internal.PipelinedApplicationDeployer.doInstall(PipelinedApplicationDeployer.java:164)
  at org.eclipse.virgo.kernel.deployer.core.internal.PipelinedApplicationDeployer.install(PipelinedApplicationDeployer.java:136)
  at org.eclipse.virgo.kernel.deployer.core.internal.PipelinedApplicationDeployer.deploy(PipelinedApplicationDeployer.java:203)
  at org.eclipse.virgo.kernel.deployer.management.StandardDeployer.deploy(StandardDeployer.java:52)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at com.sun.jmx.mbeanserver.ConvertingMethod.invokeWithOpenReturn(ConvertingMethod.java:167)
  at com.sun.jmx.mbeanserver.MXBeanIntrospector.invokeM2(MXBeanIntrospector.java:96)
  at com.sun.jmx.mbeanserver.MXBeanIntrospector.invokeM2(MXBeanIntrospector.java:33)
  at com.sun.jmx.mbeanserver.MBeanIntrospector.invokeM(MBeanIntrospector.java:208)
  at com.sun.jmx.mbeanserver.PerInterface.invoke(PerInterface.java:120)
  at com.sun.jmx.mbeanserver.MBeanSupport.invoke(MBeanSupport.java:262)
  at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:836)
  at com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:761)
  at javax.management.remote.rmi.RMIConnectionImpl.doOperation(RMIConnectionImpl.java:1454)
  to javax.management.remote.rmi.RMIConnectionImpl.access$ 300 (RMIConnectionImpl.java:74)
  to javax.management.remote.rmi.RMIConnectionImpl$ PrivilegedOperation.run (RMIConnectionImpl.java:1295)
  at javax.management.remote.rmi.RMIConnectionImpl.doPrivilegedOperation(RMIConnectionImpl.java:1387)
  at javax.management.remote.rmi.RMIConnectionImpl.invoke(RMIConnectionImpl.java:818)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:303)
  to sun.rmi.transport.Transport$ 1.run(Transport.java:159)
  at java.security.AccessController.doPrivileged (Native Method)
  at sun.rmi.transport.Transport.serviceCall(Transport.java:155)
  at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:535)
  to sun.rmi.transport.tcp.TCPTransport$ ConnectionHandler.run0 (TCPTransport.java:790)
  to sun.rmi.transport.tcp.TCPTransport$ ConnectionHandler.run (TCPTransport.java:649)
  to java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (ThreadPoolExecutor.java:886)
  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:908)
  at java.lang.Thread.run(Thread.java:662)

  Did you add this example while the server is already running (whereby cases it should work) or you start/restart of the server (to which case you must use the delay-Deployer tool as described in the SDK documentation, see the FAQ and the SDK Tutorial)

• Phone calls with Global WindowsTechincal Service Dept provider

  How can I verify that this is a legitimate service provider for Microsoft?

  I get multiple calls from this company, which I FINALLY got their name: Global service provider window
  Phone # 315-352-0912
  Name of the person of Tech: Mike Stanley (with strong accent Middle East)

  I got several calls, several people different (some with an Asian accent), was trying to tell me that we have several problems with our computer, and they tried to make me shut down my computer and follow their instructions.  In one case, they asked me to go online and the website, Sharemycomputernow.com and allow them to have access to my computer.

  I have been unable to confirm that they they are a provider of Microsoft Windows services legitimate and asked them to stop calling me.

  If this is really a scam, where should I publish information or to report?

  Thank you

  Friday, June 22, 2012 16:56:50 + 0000, JoniC100 wrote:

  How can I verify that this is a legitimate service provider for Microsoft?

  I get multiple calls from this company, which I FINALLY got their name: Global service provider window
  Phone # 315-352-0912
  Name of the person of Tech: Mike Stanley (with strong accent Middle East)

  I got several calls, several people different (some with an Asian accent), was trying to tell me that we have several problems with our computer, and they tried to make me shut down my computer and follow their instructions.  In one case, they asked me to go online and the website, Sharemycomputernow.com and allow them to have access to my computer.

  I have been unable to confirm that they they are a provider of Microsoft Windows services legitimate and asked them to stop calling me.

  If this is really a scam, where should I publish information or to report?

  It's not legitimate.
  It's a scam and with various names and phone numbers, is
  becomes more common lately.
  In addition to their money get on your part to do anything of any value,
  If you leave them in your computer, which knows what losses they did are
  where confidential information they stole.

  So if you have done so, I highly recommend that you do both of the following
  immediately:

  1 do a clean reinstall of Windows.
  2. change all of your passwords, especially banks or other
  financial sites.

  Report any where, unfortunately, doesn't help.
  Ken Blake, Microsoft MVP

• Service levels

  Hi all

  Just when I thought that I had worked on Service levels...

  I tried the following two provisions separately within Service Builder:

  Service Service [Global] [Global]

  Service Cluster Cluster Service [Global] [Local]

  node1a                                                                 node1a

  node1b                                                                 node1b

  host2                                                                      host2

  host3                                                                      host3

  The color coding is quite simply for the sake of description and show different levels of services.

  • [Global] service is all 'container' for the hosts contained in the service and overall.
  • host2 and host3 are hosts of autonomous - if two of them have a fatal alarm, which affects the service so the number of SLA fall of 100%.
  • Cluster service is the 'container' for the two-node cluster and is at the same level as host2 and host3.  I tried both a local and a global service for this service.
  • node1a and node1b is a two-node cluster - if one of these nodes has a fatal alarm, this should not affect the number of ALS as the other node is still ongoing.  I have created a registry setting in FSMServiceSLP_PercentageAvailableThreshold for Service Cluster [Global] against the value of 50, as well as Service of Cluster [Local] FSMService against FSMChildService of a value of 50, the logic being that 50% of guests at the service (i.e. a server) is always available, the availability of the service is not affected.

  My understanding is that availability of service numbers are inherited "upwards".  In other words, if I create a fatal alert on node1a, what should happen is that Cluster Service remains at 100% (there are still 50% of the available servers node1b still works, that's why the service is not affected) and Global Service remains at 100%.

  However, what seems to happen in practice, it is that the Cluster Service remains at 100%, but the Global Service begins to drop his SLA figure, showing a loss of service.  This is the case without worrying if the Cluster Service is defined as a local or a global service.  This can be confirmed by visiting the dashboard of Service for the Cluster Service and Service levels although there is a fatal alarm for node1a.

  Is it possible for the figure of service level should be given exactly?  In other words, the Service should remain 100% unless that be host2 and host3 or (node1a and node1b) are not available?

  It comes to vFoglight PRO 6.7.1 build 5.6.4.2.  I built the services in the usual way, the option «Foglight can automatically add hosts...» "is not selected and the level is set to the default"let Foglight decide. "

  Thank you

  Brian

  Well, we have this finally solved - Foglight does not calculate the availability of level of service properly, at least not in the way we have been lead to believe.  To summarize...

  If the function is defined as follows:

  [Global] service

  [Global] Cluster service

  node1a

  node1b

  host2

  host3

  If node1a has a fatal alarm, Service [Global] Cluster is not affected (which is OK because it has a value of registry FSMServiceSLP_PercentageAvailableThreshold of 50), but [Global] Service starts to drop (which shouldn't happen).  This is because the level of service availability calculation is also global alarms that would also alarms the child objects.  To work around this, change the level of availability of underlying service code.

  Go to Administration | Data | Manage the derived parameters and filter availability:

  

  Select the metric range derived from FSMServiceLevelPolicy: sourceIds = $null by clicking on availability:

  

  Select the calculations derived metric by clicking on FSMServiceLevelPolicy: sourceIds = $null:

  

  Replace the existing code in the code Expression box in the attachment, and then click Save.  This operation takes you to the screen change the derived metric.  You need to click on save here too, otherwise your code will not change.

  When you install your services, you can use global services to allow you to reuse the service in other parts of your service structure, however, when you set the percentages in the Variable of registry FSMServiceSLP_PercentageAvailableThreshold, these values are set against the topology of FSMServiceLevelPolicy Type:

  

  Once all this is done, the availability of level of Service for the [Global] is displayed and calculated correctly.

  My thanks to Philipp von dem Bussche-Hünnefeld from Dell to provide the code and help and especially for allowing me to share with the communities.

  Brian

  Warning: a full assessment has not been made to see if there is an impact on the other customer on the SLA management scenarios, so use this code at your own risk.

  Additional accessories:

  • availabilityCalculation.txt.zip

• Policy global config use IPS (ASA 5520)

  I get an error... ERROR: Global_policy political map is already configured as a service policy when I try to configure the IP addresses. How can I fix this config?

  -Change in Config attempt-

  HO1ASA01 # conf t

  HO1ASA01 (config) # IPS ip access list allow a whole

  Class-map IPS-CLASS of HO1ASA01 (config) #.

  HO1ASA01(config-CMAP) # match access-list IPS

  HO1ASA01(config-CMAP) # policy - map IPS POLICY

  HO1ASA01(config-pmap) # IPS - class

  HO1ASA01(config-pmap-c) # ips overcrowding relief

  HO1ASA01(config-pmap-c) # service - IPS - comprehensive POLICY

  ERROR: Global_policy political map is already configured as a service policy

  HO1ASA01 (config) #.

  HO1ASA01 (config) #.

  -During the running Config.

  IPS-CLASS class-map

  corresponds to the IP access list

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  message-length maximum 1024

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  inspect the icmp

  IPS-POLICY policy-map

  IPS-class

  IPS overcrowding relief

  !

  global service-policy global_policy

  The reason why you got the warning is because you already had the global "service-policy global_policy" line in the config. You didn't have to be reintroduced in this one.

  You must get rid of "policy-map IPS-POLICY.".

• CSM (Cisco Security Manager) 4.10 error discovery of ASA with service-policy

  Hello

  I have a problem with the CSM 4.10 and ASA. When I try to discover a CSM ASA I get two internal errors:

  Failure of the policy of discovery: com.cisco.nm.vms.discovery.DiscoveryException: internal error

  Exception, important political group: id = 7992934205670, type = PG firewall. InspectRule, name = .fw - namePG.FIREWALL.InspectRule.

  If I remove the global "service-policy global_policy" line, everything works fine.

  I tested ASA 5505 (7.2.5) and ASA 5512 X (9.1.6.11).

  Any suggestions?

  Hello

  You can try with the following solution, please make a backup of the prior agreement of the CSM Database to apply it, in case

  1. stop the daemon manager.

  2 reset the password for the database "vms".

  To do this, open a command prompt in the CSCOpx/bin directory and issue the following command 'perl dbpasswd.pl dsn = npwd = admin vms'

  * This resets the password DB "admin".

  3. to connect to the DB using the utility program.

  4. run the following query.

  5. validate the changes:

  Type 'make' utility and press "run".

  6 close the utility tool, and then restart the daemon manager.

  I would like to know how everything goes, and in the case the issue persists, then open a case with TAC

• Move the existing Service

  Hi all

  We have the following already set up in the constructor function.  Services have dashboards and reports generated from them:

  The Service principal name

  Subgroup for the Service

  Service1

  Host1

  Host2

  Service2

  Host1

  Host3

  Host4

  .. and so on.

  Is it possible to move these services to a new sub-group but keep the current dashboards and reports intact, i.e. not having to create a new service?

  The Service principal name

  Subgroup for the Service

  Critical_Services (new sub-group)

  Service1

  Host1

  Host2

  Service2

  Host1

  Host3

  Host4

  No-critical_Services (new sub-group)

  Service3

  Host5

  Host6

  Thank you

  Brian

  Let's say you want to get out of here

  

  from there

  

  Here's what you need to do

  1 create two new Global Services (Important and 'Not Important') (at this step you can also use local services)

  

  2. go in Add specific component, then select Services (from Service1-3) that should be part of your group-not Important

  

  

  

  (3) repeat this step with the other Sub groups

  (4) remove Services 1-3 in the group, they were now (you'll see these services at both locations in the Service tree.

  (Use red on services to remove and carefully follow the dialog box.) It should tell you that the Service itself cannot be deleted Foglight as it is still part of another Service. "This is what we want).

  

• How to go to the customer service

  I tried to solve a problem for two weeks.  Someone at - it a number for a person at the customer service which might be able to get it solved. Thank you

  If you provide some details about the question, you need help it will be easier for a person determine if help you are looking for is available.  No one here has a number to offer another one in general that you find through the help options...

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Wo finde ich den Kontakt zum Service Adobe!

  Wo finde ich den Kontakt zum Service Adobe!

  Contact support - for the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

• How to contact adobe creative cloud service

  I need TO CHANGE PRIVATE DATA ON MY ACCOUNT AND I DO MANAGED NOT to ACCESS to ALL THE MENUS POUR PERFORM THE CHANGES. What number do?

  Manage your membership and your payment. Creative cloud

  https://helpx.Adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting-creative-cloud.html

  Update the credit card for your creative cloud account

  https://helpx.Adobe.com/creative-cloud/KB/change-account-payment.html

  Contact support - for the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

• Lied on the reimbursement of costs of cancellation of service to customer

  Without any input from me, Adobe has usefully automatically renewed my annual contract in March. He got around June and I wanted to cancel, so I have... Without reading the small print and was immediately charged £109,56, which I can't really afford. I had assumed that since I signed up for an annual contract about 15 months ago, I'd be in the clear to cancel without penalty, I didn't know that the auto-renew terms were quite unreasonable. My mistake.

  So I went on the livechat and eventually the customer service agent decided not to apply cancellation fees if I subscribed to a cheaper package for the contract of a year [Photoshop and lightroom £8,57 per month].

  Abhishek: Yes, you can place a new order for the plan of creative photography of cloud for $9.99.

  Peter: will that stop cancellation fees?

  Abhishek: Yes, I escalate the case to check and to initiate the refund for cancellation fees...

  Abhishek: I'll help you with a link to place an order.

  Abhishek: Click on this link.

  Abhishek: Please click on the link above to place a new order.

  Abhishek: Let me know once you place an order.

  Peter: Are you on the amount refunded for cancellation fees? I don't want to make a different order then find out I am being debited twice

  Abhishek: Of course, you will be refunded for cancellation fees.

  Abhishek: Let me know once you place a new order that I you escalate the case to our competent team to check and to initiate the refund for cancellation fees.

  Peter: OK, thanks, should be done - placed the order

  Abhishek: Thank you.

  Abhishek: I am climbing the case to our competent team and a member of our team will contact you by email within 2-3 working days about the waiver on cancellation fees.

  It felt a bit like blackmail, but oh well, that's my only option... I was worried not to lease with an unexpected hole size £109,56.

  So I waited for 2-3 days, nothing. Two weeks later and I get?

  We will add days to credit to your plan of creative photography of Cloud (one year) instead of repayment of 12 months on your account.

  How is that acceptable? I want a refund, I was promised a refund. But it turns out that I was just being lied to keep me on the hook for another year?

  After this nightmare is over I'm NEVER reuse adobe products. It is a horribly to treat paying customers.

  Nobody here can help.  If you read the license agreement that you had when you first purchased the software about 15 months ago would have seen that you are bound to the subscription for the duration and a termination will result in a penalty of 50% the cost of the unused subscription.  As far as the offers that may have been struck to draw back you, nobody here can help you with that.

  You should probably try to contact the support again and see if they are willing to work with you to solve it, even if it is likely to not going to your satisfaction because you did cancel prematurely and is not on them to do something beyond the terms of the license agreement.

  To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

• How to reach customer service?

  How can I contact the Adobe customer service? I don't know how to navigate this site and I think I bought an incompatible version of Photoshop elements and need assistance to find how to install or to see if I can exchange it for the correct version. Thank you.

  Back https://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html

  While the forums are open 24/7 you can't contact Adobe support at any time

  Chat support: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html