guaranteed printer 8610

Similar Questions

• New printer: HP all in one printer 8610

  I just bought the HP all in one printer 8610.  I can't find any way to print from legal size paper.  Do I need to buy another tray paper?  Where can I get one?

  Hello b46,.

  Welcome to the HP Forums.

  The printer will have the second installed paper tray to print on legal size paper.

  Here are the Specifications for the HP Officejet Pro 8600 series e-all-in-one printer.

  If you need the second paper tray, here is the information for Technical Support of HP show all other opportunities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  Thanks for your time.

  See you soon,.

• HP officejet 8610: increase the size of font printer 8610

  HOW can I increase the font size of PRINTER 8610? On all printing, including ctrl 'P', the printer policy is too small.

  Windows 10, x 64. Connected wireless

  Hello

  The printer itself has no font size adjustment. You will need to increase the font size through some program that you use to generate the characters.

• 8610 printer: printer 8610 kills modem and router

  My 8610 printer is connected to my wireless network.  Whenever I turn it on it kills my connection by modem TECHNICOLOR tc8305c voice and data.  I lose wifi and my phone lines shut down.   I can get them back through the support of Comcast to reset the modem or usually pressing the reset on the back of the modem.  Any ideas how to solve this problem?

  Yes.  That is why buy a router of high quality that YOU have full control over.  If you have a phone from Comcast, Devil buy your own modem also and save 10 $par month rental.

• 8610 all-in One: 8610 printer all-in-one not to pick up WIFI

  I have problems with my printer 8610 do not pick up the Vodafone Pocket WIFI signal. The printer is picking up other WIFI signals in the area but not my internet router? It has become an issue in the last week and was working fine before.

  Hello
  
  Thank you for using the HP Forums.

  Can you do a restore default network, and then connect using the Wireless Setup Wizard?

  These resources show you how:

  Restore the printer network settings

  https://goo.GL/9fyrGS

  Connect a printer with wireless configuration wizard

  https://goo.GL/7G8a91

  After that, you may need to reinstall your software.

  Hope that helps.

• HPpro 8610: Strange print sizes

  I am a user experienced with strange print sizes. However, I just got this new printer (8610 HPpro) and it will not print any "custom": sizes. I get an error message that says that the paper in the printer does not match what is set up in the program or vice versa. I tried all combinations of tests without any positive result.

  What size you want to print?  Using the dialog box print as server properties described in this post can work for you.

• OfficeJet Pro 8610: logo will not be printed in color on my bills

  I just bought a new printer 8610. My problem is when I print my invoices in quickbooks, it will not print my logo in color. It prints the rest of my charged in color, but not the logo.

  He is currently working. I changed the logo of jpeg, PNG and it now prints in color

• HP office jet pro faces adaptation on a HP Officejet Pro 8610 8610:2

  I have an original side 2 and want to copy of side 2.   How can I get this printer 8610 to make two copies of faces from the automatic document feeder?  The printers menu window only has: selections for "copy 1 original side 1" GOLD "copy 1 original side 2 side.

  What so I have a side 2 original and copy side 2?

  I have the '2 accessory faces of printing"attached and printed 2 sides original of the computer to the printer for a copy of the 2 sides.

  Any help/direction will be gratefully received-thank you

  Hello

  The duplex is not supported by the HP Officejet Pro 8610. automatic duplex printing is supported only for this model.

  The HP Officejet Pro 8620 provide this type of functionality for this series, not the 8610.

  Kind regards

  Shlomi

• HP 8610: Wireless keeps being settled WE

  I have a new printer 8610, and although I put Wireless OFF several times, it returns!  What causes this and how do I make sure the wireless setting is OFF?  The printer is connected by USB and he didn't need a Wi - Fi connection.   In addition, when the wireless connection of the printer power is on, it interferes with the microcell and prevents to make or receive phone calls.

  Thanks for any help you can offer!

  Thank you!  That seems to have put on the thing.  I have at least 20 scanned documents today without being bothered by the evil blue light

• New printer: job moved to status "completed" without printing

  Just got a HP OfficeJet Pro 8610 today. After a few hours of work to get it set up wireless, I now have the computer recognizing printer and claiming to print to it. Unfortunately, when I send a job to the printer, the work is in the queue, then I see "printing - printing page 1, x % full...» "It gets to 100% full, then the work of removal of the print queue, and I can see it when I go to 'display completed tasks '.

  All great, no?  Except... It prints ever actually!

  This problem is on a macbook air 2010 yosemite running. I am connected to the printer via Bonjour.

  I was able to print successfully earlier when connected via USB, but that was before I managed to get the wireless working. I'm suspicious of attempts to connect via USB as well, being part of him to finally recognize the wireless printer I had to remove the configuration of the printer via the USB port.

  I would be happy to provide you with further information.

  Hello Tuxgirl & Flana,

  Thanks for posting your question and we will see if we can help solve them.  The resolution should be pretty close to the same.  Before you perform the troubleshooting steps below, ensure that you have updated through ASU...

  Updates to ASU:

  1. click on the Apple in the upper left corner of the menu bar

  2. click on App Store

  3. click on "Updates" at the top right of the window

  4. in order to ensure that the most recent list is filled, click on 'Store' in the upper left menu

  5. click on 'reload the Page.

  6. install the updates, especially HP...  Would like to ensure that you have HP Printer Software Update 3.0

  Get the IP address of the printer - 8610 (the 6700 will be different)

  1. click on the wireless icon on the front panel of the printer.

  2 copy down the IP address of the printer - example "192.168.1.102.

  Open printer EWS in browser Mac (Safari) 8610 (The 6700 will be different, but the integrated Web server should be similar)

  1. open Safari or any browser and type the IP address that you copied to the printer

  2. click on the 'Network' tab at the top

  3. click "Advanced settings" in the list on the left

  4. click on 'Hello' in the list on the left

  5 locate 'Hello higher priority Service' on the bottom right of the screen

  6. use the drop-down list to change this to 'printing 9100' and click on the apply"" button.

  7. once the screen confirming the changes, click 'OK '.

  8. close out of the Browser Internet

  Now remove and re-add the print queue of the printer again

  1. open System Preferences

  2. open Printers & Scanners

  3. Click to highlight your HP printer on the left side

  4. click on the "-" symbol to delete the printer

  5. click on the button "Delete printer" when asked if you are sure

  6. click on the symbol '+' to add the print queue of the printer

  7. Locate and click your printer series ranked Hello kind product

  8. use the drop-down list to the right of "use:" and change to the model HP Printer Series

  9. click on the ' Add ' button.

  Try your printing or scanning...

• 5660/8610: HP utility

  I have double load 1 a printer (5660) and quadruple loaded another printer (8610) and I can't figure how to remove the 5660's 1 and 3 of the 8610, s. The HP utility is not highlighted for deletions. It is only highlighted for additions

  Hello

  System Preferences > printer & Scanner, remove any unused printer by selecitng and by clicking on the sign less, then open the HP utility and check.

  If it persists, click the devices button in the HP utility, in the left pane made breast right click or hold down the CTRL key while clicking on the printer icon, then select Remove.

  Kind regards

  Shlomi

• HP OfficeJet Pro 8610: Impossible to activate the scan of the computer, complete the installation of the utility

  I'm not able to activate the analysis of my desktop computer or my laptop. I pedaled power the router, printer and computers, ran disk utility and repair permissions, I uninstalled the printer and reinstalled. I received a message that the installation of the HP Officejet Pro 8610 has been completed successfully, but when he goes then HP utility-Setup-HP Officejet Pro 8610, happens to alerts from HP and I get the error message: "a critical error has occurred. Please restart the application, and then try again ' and I am unable to continue. Download and open HP Easy Start are successful but he opens the HP utility at the end and I get the same message once it arrives to alerts from HP.

  Opening to the high HP utility-HP Officejet Pro 8610 and clicking on scan settings, Scan of the computer initially appears without the box checked to activate this function and the error message: "the computer Scan is disabled. You can always start the scanning of your computer software analysis - for example, HP scanning "." Click on the button to activate the Scan of the computer generates this error message: "error of Communication. Unable to communicate with the device. Check the cables and the connection parameters. If the problem persists, try restarting your computer and the HP device "."

  In the window of the printer, press Scan and the Scan of the computer selection produces the error message: "not found computer. Scanning software HP is required for this feature. If installed, open the HP utility and under settings of scanning, select scan to computer and enable "."

  I tried everything suggested, and what I found online to try.  I'm missing something or not doing something correctly?

  Thanks for any help!

  Hi @3star8,.

  Welcome to the Forums of HP Support! I read your post and see that you are unable to activate the computer option via the software scan. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I think that the procedure described in this post, will help solve this problem. Here is the link: Re: impossible to activate the Scan.

  This is the URL of your drivers, e-all-in-one-HP Officejet Pro printer 8610 series full feature software and drivers.

  Please let me know the result and if there is anything else I can help you. Thank you.

• HP Officejet Pro 8610: Bought new HP 8610, need to Exchange unused ink cartridges of old 8500 more

  Hi - my Officejet Pro 8500 has more had printing problems so I just replaced it with a new 8610 of Officejet Pro.   Unfortunately, I have 8 ink cartridges 940XL new for the old printer that I can't use (3 black, Cyan/Magenta/yellow 5).  Can you help me with an equivalent amount of cartridges 950XL and 951XL who will work in the new printer 8610 Exchange?

  Hello @JKL1,

  Welcome to the Forums of HP Support!

  I understand that you are looking for a way to Exchange nine ink cartridges HP 940XL for your defective HP Officejet Pro 8500 has more e-All-in-One Printer for cartridges that will work with your new HP Officejet Pro 8610 e-all-in-one printer. I would like to help you today to this today.

  At this point, I will send you a private Message to the HP ink Exchange program instructions. Can I please have you check your private Messages for instructions.

  I wish you good luck going forward with this. Good day!

• New 8610, paper jam

  I bought a new printer 8610, I can't continue with installing the printer, get the message "paper Jam".

  I removed the back panel or the two automatic print accessory side and looked for paper and replace.

  always get the message "paper jam".

  Hello

  Seems like it was a problem of material, with the new printer, swapped the printer in the oulet of retail, the other complete printer setup and works great!

  Thank your for help.

• What to do if your print head is in or out of warranty.

  First use the post linked below as a reference to determine if the print head is in or out of warranty.

  http://h30434.www3.HP.com/T5/Ink-toner-cartridge-printhead/how-to-determine-if-your-printhead-is-STI...

  For the in guaranteed print heads:

  Contact the HP technical support to have the printhead replaced.  You can contact them at the 1-800-474-6838 to the United States and Canada, international users, click on the link below.

  http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

  For guaranteed print heads:

  Since the print head is out of warranty, you don't need to worry about voiding the warranty, which means you can do a physical cleaning the printhead without worry.  You should only do physical cleaning if you have a problem of quality of sever, have a faulty alignment problem, an ink system failure, or you lack color and a mechanical cleaning does not work.  Bob_Headrick was kind enough to make the post below which describes the steps to physically clean the print head.

  http://h30434.www3.HP.com/T5/other-printing-questions/HP-6500-Office-Jet-E709a-black-printer-cartrid...

  If your problem is still there after a, you can either contact HP to try buying a new head of printing, or you will need to buy a new printer.

  I hope this helps.