Profile of blackBerry Smartphones Sound changes when loading or connected to the computer

Similar Questions

• My camera blackBerry smartphones did not when it is connected to my computer

  I had used my computer from time to time to charge my blackberry, this morning, I unplugged and tried to turn it on with no luck. The drums out and I tried again without a bit of luck. Put it on the charger and the battery with a slash symbol showed on the screen. Any ideas on what's happened.

  stltrains wrote:
  Any ideas on what's happened.

  The battery is dead. Free of charge.

  Leave the appliance to charge 2-3 hours and then, always toujours relie connected to the USB cable, remove the battery from the camera a few seconds and plug it back. If it starts - let - the charges to 100% (check the Options > status for the percentage).

  If it does not start - try using a wall charger if you're not. If you are connected via USB to the computer, make sure that you have Desktop Manager (or USB device drivers), you can download it below.

  Make sure that your USB cable is connected to one of the main rear USB ports of the PC. A USB hub, or USB Monitor port not a USB port on the front of the PC.

  Here's some good advice from loading, please read and you will see that many of them will be applicable to you.
  http://www.blackberrynews.com/2008/05/20/battery-use-tips-for-your-maximum-battery-life/

• BlackBerry Smartphones no noise when it is connected to the phone calls

  Hi all, had my first BB (a curve) Monday.  Twice now that I composed a call, he connected and I can't hear can their phone ring or hear the voice at the other end, and we hear my voice.  (I know it's connected, because one of the calls was to my son when he was next to me)!  Whenever I went in contacts to make the connection... once it worked the second time, there was still no sound.  This morning I got a call and it's the same thing.  It's almost as if the phone is cut in two ways.  I double checked my settings and Yes, the volume has increased and the mute was off. I talked to other users that I work with and none had this problem.  Have I not a simple wrong value or the BB has a few questions?

  Thank you

  I have Verizon as well.  I decided that if she continues to do I will resume.  I don't want to have to remove the battery for a question like this one often!

• Hai, my ipod shuffle when it is connected with the computer, it flashes organge light.  If I don't take no light

  Hai, my ipod shuffle when it is connected with the computer, it flashes orange light.  If I remove without light and music.  Even I kept connected all day with my laptop for charging.  But without success.  Is it possible to change the battery?

  If the shuffle still appears in iTunes when you connect, you can try to do a restore using iTunes, where the cause is a software problem.

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

  If the problem reoccurs after the restoration, it's probably a battery worn.  Need soldering skills to replace yourself, and iPod shuffle (with the exception of the 1st generation) is very small.  Not easy to work on.  This web site has repair guides

  https://www.iFixit.com/device/iPod_Shuffle

  and parts are available from sources like eBay.

  Apple 'serve' the shuffle, if it's the 4th gen (current type).  Rather than change the battery of your device, you get a replacement unit.  According to this document, out-of-warranty fees are $39

  Pricing of the Service - The Apple iPod Support

  NOTE: If your shuffle is less than one year of the date of purchase, it is under warranty.

  The retail price of a brand new 4th gen iPod shuffle, with new headphones, docking cable and warranty of one year is $ 49.

• drive external hard when it is connected to the computer says hd not formatted want format you?

  drive external hard when it is connected to the computer says hd not formatted want format you? but it works fine on my other pc, the problem start when I installed registry booster please help thanks

  Hi keo1,

  We recommend that you connect the drive to a different USB port. Also run the disk check for errors.
  See check your hard drive for errors

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Perform a hard reset when you are connected to the computer?

  Hello

  my iPod Touch G 6 seems to have momentarily buggy so I connected it to the computer, after he had died and needed a charge. He didn't start the loading of the iPod screen, so I did a hard reset while it was still connected to the computer. When he turned his back, I had to enter the password on the iPod to unlock the screen before you start synchronizing with the computer.

  Desire to do harm to the iPod? I accidentally unplugged before ejecting several times, so I'm just scared.

  Thank you

  Jesse

  You have no damage to the iPod. If you disconnect the iPod is communicating with the computer, then you can alter the iPod and a restoration will probably be necessary,

• Help! The files do not appear on the rocket when it is connected to the computer

  I brought all my library Windows Media WMA and mp3s on my rocket using auto when I got it. For some reason, the "rocket" do not place files in the music folder or elsewhere, that I can find them when it is connected to my computer. The music folder is empty. The files appear on my rocket only when it is disconnected! It's a pain to remove things quickly. I really want to sort through hundreds of songs and remove them manually one at a time to make room for the new. Can someone please?

  I'm about to use my magical powers of intuition here.

  Look in settings/USB Mode. Auto-Detect, right? (Please limit your applause.)

  That's your problem. It detects a different USB mode for each computer.

  There are two modes USB, MSC and MTP, modified through parameters. There are also automatic detection, which goes to the PSG first, then of MSC if there is no player Windows Media on the computer.

  A computer can see a way or the other: just just the MTP or MSC.  The "rocket" sees all.

  DPW works with Windows Media Player. This is prbably that you have configured on your PC.

  MSC works as a generic flash/thumb/disc player. This is how you connect to the Mac.

  Solution: Connect to the PC and move the files of the "rocket" to the PC.  Change MSC mode and put them on the "rocket" in MSC mode.  When you connect to the Mac that they will be there. And when you connect to the computer, they will be there as well - but now you will see them in MSC mode.

• Sansa E280 going to update the database when it is connected to the computer

  Hello

  Just at the moment where I was getting things straightened on my drive and everything was working fine, I plugged my E280 on my computer and it says "Refresh database" on the player and my computer does not see the E280.

  I've been looking around on the forum, and there are so many different options to try (of: delete the SYSTEM folder, which I was told not; to turn off the drive and engaging the hold button and the button to rewind when connecting to the computer, etc., which I tried ~ nothing; take off Firmware and put one on; do something in Recovery Mode) , which I have no idea how do; etc.).  Sorry, but I hope you get my point... What do I do?

  Thanks for any help once more.

  Thank you clu31355.  I tried the very first thing that you said ' put in operation and allow it to update the database (if desired) before you connect. "and voila - it worked.

  These Sansas seem to be quite ticklish - who knows what will happen?

• Why my torch blackBerry Smartphones randomly vibrates when loading?

  I have another question regarding my torch: does anyone know why my phone randomly vibrates for about 5 seconds and the red LED flash every two minutes if it is charging?

  It seems to mainly do when connected to a computer or the car.  The phone is charging definitely age % of battery (3rd party app indicator) goes back over time and battery BB logo shows that the load.

  I just put it to 'no notice' profiles, so in theory, it shouldn't do anything, but it still vibrates.

  Anyone got any ideas?

  Thank you.

  Alex

  Since the app was free and available, once again, remove the device and remove the battery while the power is on.

  Then, try to load and see if it vibrates after.

• Error 2203 2147287035 blackBerry Smartphones system error when you try to upgrade the DM

  When I plugged my BB to my PC, I got a message that a new version of DM is available.  It seems to go through the download OK but then when he tries to do the update I get the error message... and it cannot open database file.

  Any ideas?

  I recommend dong a manual downlod and install update.

  I would recommend Desktop Manager, version 5, Service Pack 1, without the Media Manager. Download Desktop Manager here:
  https://www.BlackBerry.com/downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22

• The blackBerry Smartphones No. MMS option and cannot connect to the application server

  Good evening

  For some reason any I can not receive or send MMS on my Blackberry 9520 Storm 2. I still do not see the ability to send a picture as a text when I go on my photos. I don't know if it's the phone or my provider. I have my 9520 unlocked on AT & T with a package data unlimited talk and text unlimited. I tried to have photos I was sent as well, but it was also no chance that I NEVER received a text.

  The second problem I have is that I can't access the Blackberry App Store. Try whenever I have it says that it cannot connect to the server.

  Any help?

  Edit: The problem of the App Store is no longer present (off the network and turned it back), but the MMS problem is still present.

  Hello!

  I suggest the following:

  (1) registry HRT

  • Homescreen > Options > Advanced Options > host Routing Table > BBKey (it matter little what line is current) > sign up now

  (2) Service reference books

  • KB02830 Send the directories for the BlackBerry Internet Service

  (3) restart to take batt

  • Each time a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  I hope that will move things again for you! But, the fact that you can't do SMS or MMS seems to indicate that they are not part of your plan service provider - that is why, if the above does not help, then contact them to see if you who are on your plan on their part.

  Good luck and let us know!

• BlackBerry Smartphones Garmin Mobile EU unable to connect to the server.

  Hi all!

  Sorry for the bad English, I hope you understand. I just bought Garmin Mobile for my BB 9000, installed, but the program cannot connect to the internet, it is said: "network connection not available. Please try again later. If the problem persists, contact the service provider. (Code: 405-050)

  I have an internet subscription, eBuddy both Opera Mini connected without worries. I called the support of the operator of mobile phone (T-Mobile, Hungary) and they said its because I do not have the Enterprise subscription, only instant submarines and they do not know what can I cause the sub of the company. is very expensive, its for companys, not for personal purposes.

  Do you have any idea what can do? Maybe I can connect throu Wi - Fi? Please help me.

  Thank you very much, Laox

  Dear everyone!

  First: sorry for the bad English :-)

  I have my Garmin to work. Yesterday, I did a full security check of my mobile. What does a hard reset (removed all memory of the phone) and now installed back safety record. I didn't do anything special, just started the Garmin and its worked. Why? I think that the phone can't install Garmin correctly the file downloaded, but when I deleted and has let the BB Desktop Manager to install it that everything went very well. If someone has the same problem try this option, its worth it!

  PS: of course, I wrote a letter to BB and Garmin support, but no one knew the problem...

  Bye!

• IPad no charging current when it is connected to the computer, said

  Original title: why ipad indicates no current when charging connectd to computer

  My iPad needs to be reloaded, but when connected to the PC with the cable apple, says iPad not charging. Someone knows why?

  This is quite normal.  Apple has designed the iPad to the only charges when it is connected to a charger taken approved or to a USB port of high amperage only found on Apple iMac and MacBook products.  If you connect it to a PC port or non - Apple USB it will not load.

• Profile of blackBerry Smartphones Sound stuck in normal conditions

  My sound profile management is stuck in normal & I can't change to vibrate, aloud, silently, or other options on this page. I turned off my phone completely out of battery and released, & still nothing. I spend a lot of time in places where you are not supposed to have sound on, I need at least vibrate.

  marcim wrote:

  I turned off my phone completely out of battery and released, & still nothing.

  I just want to clarify that your phone is powered when you remove your battery.  Your description sounds like you are turning off your phone before removing the battery, which will do nothing to improve your situation.

  Please confirm this by posting back.

• BlackBerry Smartphones Re: stuck on loading by connecting to Blackberry World

  Hi all, I was hoping someone could help me?

  I created a blackberry ID, but when I try to connect through blackberry app world, I get just stuck on a loading screen.

  I uninstalled and reinstalled the blackberry app world, I also have a different ID to see if I could connect from it, but still no joy.

  I tried the signature from a laptop instead of my phone and that works without problems, but when I try on the world of the app, I get the authentication screen, then a loading screen, but he remains stuck on this for hours unless I click the previous button, which I then the message «you must accept the terms and conditions to use this feature of blackberry app» , but I already DID. and even after having re-installed just to check, I still cannot connect.

  This means that I can't update or install all the applications and its really frustrating, I searched on here and online for an answer to this, but I just go with a lot of people asking the same thing with no solutions!

  can anyone offer some advice please, I would really appreciate it I love my phone and everything works perfectly.

  Thanks in advance,

  Emma.

  UPDATE!

  OK, so after nearly two months of research and no left and no answers of blackberry or my service provider, I finally found what I think maybe the problem for me.

  I live in a region where virtually no 3G reception, so I thought maybe it was my problem.

  So, I have linked to my aunts WiFi and hey presto, it let me connect AND let me accept the terms and conditions and download free apps, so maybe that will help someone, if you can get also a WIFI hotspot, or connect too your own internet wireless via your handset for BB, so try and access your account Blackberry ID and APP world.

  Once I had made and exception conditions, it let me access it from my laptop without connection to WIFI.

  Hope this helps you, I'm so happy that it finally works for me!

  MERRY CHRISTMAS!

  Emma