HDD1 Fault [CF]

Similar Questions

• PowerEdge 2900 switchable hot

  I have a Dell PowerEdge 2900 running windows Small Business SERVER 2003, we will be taken out of service soon, but we just had a departure by car to go bad - seeing yellow flashes and error on LCD server message: 'E1 H10 HDD1 fault.'   daily backups and weekly regular running properly because of corruption, then I copied the table as a security measure.  I bought a new drive identical to the 4 existing disks that are configured as Raid 1.

  The drive is a:
  341-4430 750 GB 7.2 K rpm Universal SATA 3Gbps 3.5-inch hard drive

  The raid controller is:
  341-5754 1 SAS/SATA embedded RAID 1, PERC 6 / i integrated/SAS6/iR

  Can I leave the server running and pull the wrong drive and drag the new, without running applications before or after this procedure, and will be automatically rebuild the raid?

  I know that I need to replace the server.  But my immediate need is to solve the problem of bad disc, and I'd appreciate any advice or a link to the instructions in this procedure.

  We are a small non-profit and have none of the staff and no budget assistance, or I would have called in help.

  Thank you

  Jeff

  It is a Dell application that will interface directly with the hardware. It must be installed on any Dell server that you manage. On the downloads page, it is called OpenManage Server Administrator - Managed Node, use the 32-bit version.

• Fault on my Macbook Pro in Nigeria

  I have a macbook pro that I bought 2 years back and all of a sudden the laptop won't boot any more although when the load is connected the charger shows green color.

  I work in nigeria and made visit to the store in Mall i city of ikeja told that I have to send the phone to the service center located in the State of dolphin, ikoyi.

  I sent the laptop to the service center but was asked to pay a fee of about $ 50 (20 000 naira) American so that they can diagnose the failure on the laptop and then let me know what the fault is and how much it would cost to fix it.

  What is the normal procedure?

  Waiting for your answer? Anyone have a similar problem before?

  Kind regards

  Charlie

  It is not unusual for a non-Apple store to charge a diagnostic fee.

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• My Mac pro LED backlight fault it?

  Hello, all the

  As subtitle, my Mac pro LED backlight fault it?

  I have attached the picture of my screen.

  Please, help me double confirm (the lower edge of the screen). Thank you very much.

  

  Kind regards

  Chanming

  What model of MacBook Pro?

  If you connect an external monitor and mirror display which displayed on the external monitor?

  Looks like a display problem. I would like to make an appointment at the Genius Bar to an Apple store.

  Shop Apple Store - Genius Bar

  https://www.Apple.com/retail/Geniusbar/

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• I have a fault of the screen

  I have a screen fault find a solution and I am in security

  Please indicate what type of device Apple you have that has a defect of the screen. You have posted all over the map here, and it is difficult to identify. Also, please describe what is this defect.

• My 5 years old Satellite Pro P300-19 q has developed all of a sudden a fault

  Without realizing, I posted the message below on the Forum we Toshiba:

  Hello

  My laptop which is 5 years old and has worked without any problems, has suddenly developed a fault I don't seem to be able to untangle. It starts ok and gets on the screen "Toshiba Leading Technology" and it's not there. Should not or reaction to something. I tried to enter the power on Start menu and pressing the F12 key, it recognizes and says 'Please wait' but nothing happens. It applies to "Configure" button F2 and F8. There is absolutely no response and HDD led light does not illuminate.

  I have not installed or changed anything. It runs Windows 7 and I don't have the recovery disc and the installation CD original W7 but they are useless if I can't access the startup option.

  I also removed the HD and connected by USB connection to my work desk and access all my files and programs, so it doesn't seem to be something wrong with the disc either.

  Can someone offer me some suggestions?

  ___I HAVE HAD THE FOLLOWING RESPONSE_; __

  Looks like you have a corrupted BIOS.

  I recommend asking Toshiba http://pc-support.toshiba-europe.com/ for any help. They got the disc special crisis to retrieve the faulty ROM BIOS module and instructions on how to install it.

  I contacted the technical service of Toshiba UK enclosing the message above but have not heard
  anyone after. Does anyone have information about this recovery disk and where I could get it?

  I also think that the BIOS can be troublemaker in the whole of the situation. When you start your machine, it begins with the verification of low level material and later start to load the operating system preinstalled.
  In your case the laptop is blocked for some reason any on this first step.

  Unfortunately, your options are pretty limited. What you can try is to remove the check and RAM modules and so portable HARD drive will pass this first stage.
  AFAIK the disk of this crisis is for internal use only so I don't know if you will get it somewhere. What you can try is to google a bit and maybe upload it somewhere with specific instructions on its use.

  In the end, I must say that these issues don't occur so often and I have to ask anyway: you may have updated the BIOS or done something that may be responsible for this?

• After upgrade to El Capitan, Python segmentation fault 11 after two commands are entered.

  2011 Macbook pro with Snow Leopard (8 MB RAM).  I upgraded to 10.11.4 and now interactive Python (2.7.2) is broken.   After you enter the two commands any (?), it crashes:

  Pauls-MacBook-Pro: ~ python $ paul

  Python 2.7.2 (v2.7.2:8527427914 has 2, June 11, 2011, 15:22:34)

  [GCC 4.2.1 (Apple Inc. build 5666) (point 3)] on darwin

  Type "help", "copyright", "credits" or "license" for more information.

  > > > x = 1

  > > > y = 2

  Segmentation fault: 11

  Pauls-MacBook-Pro: ~ paul$

  I saw the posts here and on StackOverflow, saying that this problem is corrected in python 2.7.6 but I have a few questions:

  one) because it is a problem for a few years, why not upgrade the El Capitan installs a new version of python (if I understand correctly, the El Capitan installation includes)?   :/   For example, instead of everyone made the upgrade (at least in some versions) with the problem individually?

  Given that I apparently must upgrade to python:

  (b) I saw mention of problems with the evolution of the system version of python.   Can I change the version of the system (my preference), for example. 2.7.11, or do I need to install a version for my personal use?

  (c) how DO I upgrad.e the version of the system, or install another version?

  Thank you

  It is not the system Python, which is the version 2.7.10. What you get from "which python"?

• Strike number CP 2025 printer cleaning/fault

  Hello

  My company has invested in an HP CP2025 printer a couple of weeks, that is used on the network of eight or nine people.

  However, there is a problem where, after printing several pages, generally 3 pages, the printer goes into cleaning for a while and then comes up with a fault typing error. At this stage you hav press OK on the printer to continue the process. And then it repeats.

  The printer decides to print some pages twice, but not all of them also and it seems to be no pattern in which one she repeats.

  Any help will be appreciated, because I can't work this.

  Thanks in advance.

  Hi all

  We just got a new CP2025 gave us last night at our Church.  I am the tech administrator for the Church, so it was my task to install the printer with connection of the printer drivers.

  When we (me and pastor) installed the drivers from the printer and print a test page, we had those little dots on one side of the paper.  Thinking that it is just a toner sedentary, I took each individual toner cartridge, he trembled and succeeded him.   Always had the points.

  So, we looked at the documentation supplied with the printer.  Nada on what to do.  Says "For the resolution of problems, call HP Support."  Then I give the floor.  the hours are from 8 to 8 East, so they are closed.

  My pastor calls for HP support today - the tech told him that "cartridges of toner in a printer that has remained in the warehouse will be deposited."  You must clean and calibrate the printer to remove it. ' So he did, and the points disappear.

  This is - why isn't that one of the installation steps in the paper documentation that came with the printer?  We have cleaned the printer last night, and calibrating it, it is not very clear on how to do it.

• Fault resilient boot!

  I came across a fault resilient booting. What is c?

  You must have two or more processors installed on your machine if you have encountered a FRB. If the boot strap processor (BSP) fails to complete the boot process, FRB intervenes and try to boot the system using the replacement processor. If the replacement processor is functional, the system starts.

• Satellite C850-1NU - BSOD with Page fault in non paged area error

  So basically I was looking through the web on my laptop, and then suddenly I got a blue screen of death.
  It said Page fault in nonpaged area.

  Some people say it means that the RAM could be faulty.
  Is this true and if it is faulty should I take it back to PC world where I bought it?

  Thanks ;)

  Hello

  The BSOD could be caused by system problems or malfunction of the equipment.

  .. and Yes; the BSOD containing the paginated Page Fault in any area error could be related to memory problems, but it could also be a temporal problem that appeared one last time

  But if this BSOD will appear in the future for the umpteenth time, I recommend you contact the service partner to verify the material.

• Satellite P500 HDD1 password

  Hello. I wonder a HDD1 password. Never happened before, and I don't think I've ever put in place. Reflections on how to reset? Merry Christmas.

  I m not 100% sure, but as far as I know, the HARD drive password is saved on the HARD drive and can not be deleted anymore.

  Anyone who uses your computer laptop last days?

• Satellite M40X-230: display fault - vertical lines

  My laptop crashed last night and on itself reboot screen displayed (spaced on each 8mm) vertical dotted lines and then crashes with the following message (edited for the relevant points)

  "Windows was arrested to avoid any damage to your computer.
  The problem seems to be caused by the following file: ati2dvag...
  The device driver got stuck in an infinite loop. This usually indicates problem with the device itself or with the device driver...
  "Technical information: * STOP: 0x000000EA (0x822185B0, 0xF8972CB4, 0 x 82133288, 0x00000001)".

  The screen is damaged now wherever the phone is turned on.

  However, if I have it start again, after the error, then mode message without failure, once Windows is used the display looks good (he is still defective prior to this, however). The same fault also occurs with an external monitor.

  I tried to uninstall the driver for the graphics card, but that makes no difference.

  Any ideas? I would like to reinstall windows, but that the fault if poster before the aircraft reach POST I really don't think that will make all the difference. That the screen is in Mode safe but not while it is booting up also does very much make sense to me either.

  Thank you very much to get this far in my ramblings.

  Rich

  Hello

  According to the error message:
  "... This usually indicates problem with the device itself or with the device driver... »

  It may be a faulty graphics card because the same defect appears on the external display. But diagnostic tests are required to be 100% sure what s the fault could be.
  The Toshiba service partner can start the test and then can give you some details about the failure. So, in my opinion, you should contact Toshiba service partner in your country.

• I'm just my front camera of pluse iPhone 6 have manufacturer fault do I do

  I have iPhone 6 pluse about a year, still problems with camra fron to read on the internet, it is made fault

  I just want to know what I'd do

  Check your serial number here: https://www.apple.com/support/iphone6plus-isightcamera/

  If your phone is concerned, take a Bar make Genius. -AJ

• Qosmio G20: Is there a hidden partition on HDD1 for QosmioPlayer?

  Hello

  I have a Qosmio G20 and I noticed that the BIOS indicates HDD1 95 GB HDD2 is 100 GB (as it should). Is there anyone else who have experienced this problem or is my HDD1 damaged or is there a hidden partition?

  If there is a hidden partition - how to remove? (I really don't see the point with QosmioPlayer).

  / Henrik

  Hello

  AFAIK the Qosmio Player is pre-installed on the hidden partition.
  It is perhaps a reason for different size of HARD drive.

  The disk format HARD completely should remove the hidden partition and Qosmio player. But this procedure is not recommended.

  Please also check other similar topic display:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=9709&MessageID=34297藹

  Good bye

• Adapter Qosmio F30 AC fried (burnt cables) is it the fault of notebooks?

  Laptop = Qosmio F30/695ls

  I was wondering if other people have encountered this problem? Is this a fault in the design of the adapter? The adapter model number is; * PA3237U-3ACA. *.

  The cord was fine until today (looked perfect) death of my laptop I thought it has not been plugged in properly checked if all parties, but each has been connected - then I noticed a melted part where wiring has been merged with plastic sheath. (just after the elbow on the wire protector which leads to the laptop leaves the ac adopter)

  I would just replace it immediately if I know it's only fault the adaptors - however I am worried there is a problem with the laptop itself. In the last few weeks, I noticed a very high frequency noise coming from him. Sometimes near the back where the power cable is connected and other times near the waterfront where the battery and HARD drive are (the drive is new and only a few months old) the laptop itself is almost 3 years old bought in June 2006. I'm afraid that the AC adapter has damaged the internal power system or the internal power supply was to damage and killed the adapter? Does anyone know how to check if the laptop is damaged internally or if it's just the AC adopter? I don't want to just replace the adapter and end up frying the motherboard!

  I have a second battery with a few minutes of charge, so if you need me to check anything on the laptop I can (operating system is vista)

  Any ideas at all about the cause of the problem, welcome!

  Oh PS. I live in Ireland, the electric current that he 220V and it is also connected to the Earth, I use an adopter plug multi protected against overvoltages.

  Hello

  > Does anyone know of a way to check if the laptop is damaged internally or if it's just the AC adopter? I don't want to just replace the adapter and end up frying the motherboard!
  You can easily test.
  Simply unplug the AC adapter and check if the laptop works correctly using only the power of the battery.
  Generally, the laptop can not damage the AC adapter! As far as I know technically this is not possible then I guess that your adapter is defective and must be replaced

  See you soon