Help please - baffled by something simple

Similar Questions

• speakers are connected but not detected! Help, please!

  I tried to plug in my sound souround in my lap. Well the wires accidentally touched something and then there is a loud noise, of course, we were surprised & so after numerous attempts, trying to have his surround for the computer, we couldn't hear anything so I gave up & just connect the speakers to the computer again in the tower. Well we couldn't hear anything now! I tried to watch a movie and NOT of HIS! We tried pluggin helmet & still nothing! & now even if the speakers are plugged and his saying that the speakers are not detected even if their plugged in! But if I check the sound I can see that the lines for the volume are moving up and down, but we can't hear anything! so I called a computer tech and he said that sometimes the sound is changed well I changed the sound and he was trying to detect the speakers, but it is still saying that nothing is plugged into the Speaker Jack when they are! Computer Savy not so much need help please! Blow something?

  Hello

  The steps in the article would solve that problem.

  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Also, try to use the same system on another computer sound and check if it works well.

  Let us know the status of the issue.

• to refine my question. The Lasso tool does not work.  When I select the content aware lasso shrinks and nothing changes.  Help please.

  to refine my question. The Lasso tool does not work.  When I select the content aware lasso shrinks and nothing changes.  Help please.

  A simple reset will often be the case if a tool becomes awkward. Go to this link, then select the lasso tool:

  Difficulty of tool

• Comparison of simple table does not. Help, please!

  I struggled with this problem for a few days now, and I'm slowly losing my mind.

  • I am in Adobe Acrobat 10.
  • I have a field called button group: btn0, btn1, btn2, etc..
  • I have a band called text fields: txt0, txt1 txt2, etc..
  • I have a script that takes the value of txt0 and makes the legend of btn0 and so on.
  • I have a script that sets the btn0 to setFocus txt0 MouseUp action, and so on.
  • These scripts work very well.
  • I have a script that takes values of all fields txt and sort puts them in a table.
  • I have a script that takes the array element [0] and makes the legend of btn0 and so on (alphabetical list of buttons).
  • These scripts work very well.
  • I am trying to compare the value of the array element [0] to each field txt to find the match, then set the action MouseUp btn0 to setFocus to the corresponding txt field, and so on (until my alphabetical list points to the correct location).
  • It is here where I am at a loss.

  Here's what I have:

  specified fields txt

  txt0 var = this.getField ("name of Z");

  txt1 var = this.getField ("name");

  etc.

  put their values in an array named rxArray

  var rxArray = [txt0.value, txt1.value]; etc.

  sort the table

  rxArray.sort ();

  Set the legends on the sorted array elements

  for (var i = 0; i < 5; i ++) {}

  var b = ("btn" + i);

  this.getField (b) .buttonSetCaption (rxArray [i]); works very well; sort by alphabetical order of the list of buttons

  Here is what goes wrong

  for (var x = 0; x < 5; x ++) {}

  var r = ("txt" + x);

  If (rxArray [i] == r.value) {}

  var s = (r + ' ". setFocus();" ');

  this.getField (b) .setAction ("MouseUp", s);

  }

  }

  }

  end

  Here's what I know:

  Alphabetical order and labeling works very well, but the MouseUp scripts to buttons work at all. Nothing happens.

  If I change the piece next to the above script:

  If (rxArray [i] == r.value) {}

  var s = (r + ' ". setFocus();" ');

  this.getField (b) .setAction ("MouseUp", s);

  To do this:

  If (rxArray [i] == txt1.value) {}

  var s = (r + ' ". setFocus();" ');

  this.getField (b) .setAction ("MouseUp", s);

  Because rxArray [0] is equal to the value of txt1 ("name"), then the MouseUp script for btn0 Gets the value:

  Txt4.SetFocus ();

  So I know that, whenever the nested loop runs, the case statement is true, and the setFocus script updated. Until the end of the loop, leaving the setFocus as last run element. Then why my script does not work? It should only update the setFocus script IF the array element matches the txt field and it is on THIS field of txt.

  Please please help. I know I'm missing something simple somewhere.

  I don't see why you would need tables at all... For example, sortNumber.

  You can essentially all this code replace it with this:

  for (var x = 0; x)< 5;="" x++)="">

  var t = this.getField ("t" + x); the text field

  var b = this.getField ("btn" + x); the button

  b.buttonSetCaption (t.value);

  var s = "this.getField('"+_t.name_+"').setFocus()";

  b.setAction ("MouseUp", s);

  }

  It is the same for the rest of your code as well.

  With respect to the addNew function, you must add a pause command inside the if statement to prevent continue further after the first empty field has been found.

• Why my up &amp; arrow keys function changed? I didn't click something by accident? Help please?

  Why my up & arrow keys function changed?
  I didn't click something by accident?
  Help please?

  (My new kitten * power have stood on something on my keyboard - it has done this before and put the mode full-screen, but I managed to fix this)

  Normally, I scroll a web page a little at a time using the down arrow on my laptop keyboard key. Since yesterday, when I press the arrow down, the page jumps to the bottom (like pressing PageDown) and arrow high jump all the way to the top.

  How I put it back so that it scrolls a little while I press the button?

  Hello Lancs, please press F7 to leave caret navigation mode - then the behavior should be back to normal...

• How can I return my menu bar the new version i.e. everything under a single button named firefox. I clicked on something and my menu bar is back to the old version, and it makes my screen look clumsy now. Help, please!

  I clicked on something by mistake and my menu bar got extended as it used to be in earlier versions of Firefox as file edit view history bookmarks tools help... all in the same line... it is now my screen look clumsy coz of the new version. So, I want the menu back bar because it is in the new version. Help, please

  You see the orange (on Linux gray) Firefox button if the menu bar is hidden, to hide the menu bar through the view > toolbars, also accessible via Firefox > Options.
  
  If you need access to the hidden menu bar press F10 or press and hold the Alt key to display the menu temporarily bar.

• I get an error message of complete storage - please backup and remove your something online (can not see the full error message) when converting PDF reader to point rower inacrobat DC. Help, please

  I get an error message of complete storage - please backup and remove your something online (can not see the full error message) when converting PDF reader to point rower inacrobat DC. Help, please

  Hi debg25514049,

  You will not be able to export your PDF to PPT using the service Adobe export in PDF format.

  You'll need subscription to pack Adobe PDF or the Acrobat application to convert PDF to PPT.

  Kind regards
  Nicos

• After a numerous updates, some sites, including Mozilla, keep telling me that I'm not using the latest version of firefox. Help, please.

  During his visit pandora.com recently, it asked me to update the browser more recent. I did it several times and that the (pandora) and your site continue to tell me that I'm not using the latest version of firefox. I don't understand. am I missing something simple? Help, please.

  Your User Agent string shows you are using Firefox 3.5.5. This is the older way. The latest version is Firefox 7.

  Perform the steps in the section reset your User Agent in say Firefox is obsolete or incompatible, even if it's the latest version of Web sites

  Check and tell if its working.

• PSKT4E-07X023EN: need drivers! Help, please!

  Help, please! One day, I restarted my pc I would normally, and it came with a code error on something in the sense of "we need to reboot your pc" so after days that I did get it back and actually log on windows. Now when I go into Device Manager, there are 4 things with yellow exclamation points.
  (1) network controller, which does not allow me to go on the internet.
  (2) PCI device
  (3) PCI Simple Communications Controller
  4-SM Bus controller

  Please tell me how I can fix or install these without going on the internet because I can't!

  Thanks in advance

  Hello:

  None of the info you've posted about the model identifies as the model number.

  Please note the product number of your laptop.

  Many products are on the label as well as the serial number.

• Liteon Cd ROM completely lacking in 'My Computer'. Help, please! (Someone... Please help!)

  Hello.  I tried to contact the OEM directly, but it has been a week and no response.  I hope someone can help me please.  I copy the email below.  Because I sent this e-mail, I found more "evidence" of the prior exestance of CD ROM  Although it is completely zero from 'My Computer', there are a lot of drivers on the computer for him and now I don't think it's the drivers. I don't know what to think, really. "Here are my new results: in Device Manager, under" Liteon CD ROM "(always with an exclamation yelloe on this subject) I tried to run the"Hardware Update Wizard"for her, and I got this response: the wizard did not find a better match for the material that the equipment currently installed. When I look under 'properties', he says: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) Click Troubleshoot to start the troubleshooter for this device. When I click to troubleshoot, I get the same message ("Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »).  He (Liteon CD-ROM) is not listed under "config/system/system information system summer/components/multimedia/CD ROM '-there's just an empty space next to"CD ROM ". Even that in "my computer - it's gone."  The CD ROM will not work, but the light is on and it wil eject and accept a disc, but it will not read it. Please look at my email below and please email me with any questions or recommendations. I can't take another sleepless night, trying to "find my CD lost.  It can be a very simple solution - I hope so. But in all honesty, I really don't know what the problem is.

  Dear Sirs,

   

  I'm really, really hoping you can help me. I'm about to lose my mind trying to figure this out by myself.  I can't find a more appropriate contact you, so please forgive me if this isn't in your area or service. If that is the case, Please before my email to the section within your company and let me know. Everything on the official Liteon site I found and (tried to) read is in Taiwanese, and I am unable to read or translate.  If you could (have mercy on me) so help me or point me in the right direction - I would appreciate it very much .  I tried to understand what I have to do for 2-1/2 weeks and I have spent too much time on this when I should be spending time with my kids! :).

   

  My problem is the following... Recently, I ran a clean up/duplicate file registry cleaner program (ARO) and it seems also removed some vital and very much needed files, extensions, drivers, programs and who knows what else.  I had to download several other programs, file extensions and drivers from scratch, in order to get these things working again. But I can not for the life of understand me what to do with my Liteon CD-ROM. I also used the registry cleaner deletes "duplicate files", and after researching (too late), I found that it often confuses some files as duplicates when they are indeed not the same - post or file descriptions are very similar, or disable a single number or letter. I lost a lot of my pictures as well, and I'm heartbroken over. Anyway, the biggest problem I've noticed is that my CD ROM (Liteon CD-ROM LTN486S) will not work. It happened immediately after the registry cleaner 'cleaned' my folders and things - so I guess that's the culprit.  In fact, my computer is not recognizing even the CD ROM at all. It of Completely disappeared-MIA of 'Information/system components' lacks content 'My Computer' and when I try to update the drivers in the only place I can find that show the CD ROM (but with a large yellow explanation
  ! Mark) - in the "Device Manager" , I get the error: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ». Then, when I right click on it and select "Troubleshoot to start the troubleshooter for this device", I get the same error: ("Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »). Track only of it (that I can find anyway) is in the 'Device Manager', where even once, it's a big yellow exclamation on the "Liteon CD-ROM LTN486S" here.  It is the only piece of evidence that it ever existed. I've looked everywhere I can think of, in places that I didn't know existed. I've looked everywhere on the internet for the driver for the "Liteon CD-ROM LTN486S' updates but unfortunately, I can't find. There are a few items that refer to the "OEM".  For some reason, I think it's the drivers, but I'm not computer very well informed. It could be something completely different. I wish I could uninstall info CD (only) existing Liteon I can find - and reinstall everything from zero (even do this? Please, tell!). Then... I thought that I contact me Liteon and ask for the drivers. It's at least a Start.  Could you tell me if there is something else I should do or review.
   
  My system info: I have a (Compaq Evo) Windows 2000 Professional SP3 XP. For what it's worth-(if this is important) it's a NIC PCI 32-bit, Intel Pentium 3, 700 MHz, 128 MB total memory, 20.0 GB hard drive, CD-Rom drive, CD - RW drive, 56 k Modem and 10 / 100Mb... (whatever the devil what is). Microsoft Update is in place and worked (automatically), and my system is "up to date" as far as MS is going. Help, please!  I don't know where to another look or what else to do. Please, please... Please advise.
   
  I thank very much for any help, information, recommendation or reference you can give. Maybe you have a safe and wonderful holiday season.
   
  Jenifer Williams, 39...
   
  Amazing MOM, amazing nurse
  A lot of email from Google and shopping experience :)
  Skills very little mundane
  (But quickly learning by trial and error
  !)
  SC, UNITED STATES.
  Favorite (only known) language: English
   
   
  Thanks again!
   
   
  .

  You're welcome, and good luck!

• I accidentally turn off my WIFI! When I go to it says disable 'status' HP wireless assistant but no, where do see how to activate it again, can someone help please!

  hen I go to it says disable 'status' HP wireless assistant but no, where do not see how to activate it again, can someone help please!

  I went to something help I have and it says to reboot my laptop, press F10, then go to system configuration > integrated device options > LAN/WLAN switching > activate. I restarted my laptop and pressed F10 but it come with the system configuration...

  Hi you can access device manager and enable you WLAN, or simply more portable computers HP come with a button to toggle WLAN, please check the color of the light wireless button and press again to see if it changes color, if not you have successfully activated the WLAN again.

  You can also try

  1. Reboot the laptop.
  2. Press F10 .
  3. Enter the BIOS .
  4. Select Advanced options .
  5. Select the Device option , WLAN/LAN switching.
  6. Switch to Activate .
  7. Select save changes and exit .

  If you could tell the laptop model and the version of the operating system you use that I'll be able to give you more accurate and simpler measures

• OfficeJet 4500 all-in-one wireless WIIL NOT STAY online! Help, please!

  Help, please! I am incredibly frustrated with my officejet 4500 all-in-in-one wireless. my printer won't stay not 'online' and when I check my wireless network, the printer is listed as offline as well. When I try to print, I get the message "offline". I downloaded it on every possible driver update, scan and fix the hp program and even uninstalled and reinstalled this printer at least 8 times. I'm at my wit's end.

  I turned off the printer, and when it turns on, a document or two will show, then if I try to print something again immediately, I am again in offline mode.

  I also tried the 'hard reset' options I don't read here, but again, no luck. I changed both printer cartridges.

  I have coursed through the troubleshooter at least 8 times, and who never really helped. Cannot get a consistent performance. of course, at the time wherever I decided to ask for help, I'm out of warranty.

  I really hope someone can help me. I confess that I have very limited computer, so all suggestions, please use very simple instructions...

  Am I the only one having this problem?

  I'm sorry that you are experiencing this issue. It seems that your router is hitting the printer on the network. You can try setting a STATIC IP ADDRESS for her. This will have the computer and the printer communication directly.

  Here is a link that will help you implement. Let me know if you have any questions on it, or if that helps.

  http://support.HP.com/us-en/document/c02790693

  You can also reset you router. Unplug it for 30 seconds and plug it in again.

• Error code: __Stop: 0x0000008E (0xC000001D, 0x82651B5A, 0xA03EBBD4, 0x00000000) can anyone help please

  My laptop Acer gives me a blue screen on start, or crashes on startup.
  I just got an error code:
  Can stop: 0x0000008E (0xC000001D, 0x82651B5A, 0xA03EBBD4, 0x00000000) anyone help please

  Hello

  Two main causes of this blue screen video drivers and BIOS - check with the system manufacturer
  Site for graphics (Video) card and BIOS, then on site of the manufacturer of the device for the last video. It may be
  other pilots to check there. Disable the installation of self as those who are older and if
  Updates Windows suggests a pilot just HIDE. Antivirus is another possibility.

  See methods of update driver generic in the next message.

  BCCode: 8th 0x0000008E is the same as 0x1000008E

  Cause

  Bug KERNEL_MODE_EXCEPTION_NOT_HANDLED control is a very common bug control. To interpret
  You must identify which exception has been generated.

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques:

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

  If you do not know the specific cause of the exception, consider the following:

  • Hardware incompatibility. Ensure that all new equipment installed is listed in the list of the products tested Microsoft Windows market.
  • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

  If the verification of the message bug list a driver by name, disable or remove that driver. In addition, disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the system startup service using the recovery and then Console by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x1E. You can disable the cache in memory of the BIOS to try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved .chk , which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation.

  You can solve the problems of BIOS by upgrading the version of the system BIOS

  =============================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  It comes to my convenience store generic bluescreen:

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Photoshop version 7: how to activate the brush strokes in trails? [was: Legacy Software needs help please]

  I'm still using Adobe Photoshop 7 (yes I know, get with the times and download... etc, etc) and it suits my purposes very well I use it not for commercial have a personal use but simply.

  Anyway, my question is: How can I enable brushes to paths. Can I make a selection and even a channel mask, but a vector path why? Don't not Adobe 7 supports this or have I missed something. Asked the help of files with different subjects repeatedly and vain and someone me clue please. It's probably something simple right...

  

  Maybe this will help:

  1 brush stroke

  2. selection of the the stroke (NOT select all)

  3 convert on the way

  4 Edition > define a custom shape

  5. name of the form

  6. choose the custom shape tool

  7 note the 'shape' in the Options bar

  8 form is the last form in the menu on the right

  8 Opern new file and drag the custom shape. It is the vector

• Video help please

  Hi all

  I'm doing something that I think is actually very simple, but does not work for me.  I should start by saying that I'm using a trial version of CS5, and I wonder if this is the cause of my problem, but don't think so.

  I'm trying to display a video in a basic HTML file created in Dreamweaver.  I use flash to generate the .swf file to be shipped.  I used the Media Encoder to convert the video file I have of .avi to .f4v.  All this seems to work very well and when I test the html file locally it works.  The question I have is when I load the files on a web server for further testing, he plays the video, but there is no visible controls on the page for the video.  As indicated above, they display correctly when I run it locally.  FYI, I also loaded the file skin.swl on the server in the same place as I have locally.  I have tried everything I can think of trying and can't get the controls to display all deployed on my web server.  Help, please!

  It seems that the path of the video player (on the Web page) on the skin is not correct. Download the .swf directly shows the skin:

  http://www.trophyspots.com/Media/trophyspots.swf

  skin shows...

  because the skin and the player are in the 'media' folder, the path of reader to the skin is NOT compared to the physical location of the player to the skin, but rather from the Web page on the skin... so don't forget to include "media /" in the path to the skin.

  Once properly pathed, test the .swf directly on your local computer does NOT work! This is because you need the path as if it were on the Web page, no, it's physical location.

  In addition, the reason for the black bars at the top and bottom of the video is when the video was created / edition, the workplace has been implemented for def standard with a ratio of 4:3 and then aspect video high definition has been imported. But he has an aspect of 16:9 ratio... in other words, it does not.

  When video editing screen, you must set up your editing program to manage 16:9 aspect ratio from the beginning.

  Best wishes

  Adninjastrato