His headphones not speakers

Similar Questions

• 520-1032: headphones not speakers on 520-1032 cut after Upgrade to win 10

  Hi all

  After the upgrade to earn 8.1 64-bit to win 10, my PC do not cut the speakers where to plug my headphones, I tried many ways, but it does not work up to now as reading devices, when I plugged in the headphones, I can't put the helmet of default device.

  someone help pls.

  Thank you.

  Hello @happythanh,

  Welcome to the Forums of HP Support!

  I stumbled upon your post on sound level and wanted to help!

  Updated the drivers to work with Windows 10?  For your product, all Windows 10 drivers are pushed through Windows Update.  Try to check first the program.  You can consult this site too: products HP - where can I find drivers Windows 10 and software for my model?

  If you have problems to install the drivers, you can use the tool on the following site:

  Open the Windows Update troubleshooting tool

  It is possible that the drivers are not available for your product.  If this is the case, or the drivers you found do not work, try to use the solutions on this site to work around the problem and let me know how it goes: how: install and update drivers in Windows 10

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great weekend!

• No headphone or speakers not connected - if I internal speakers

  Hello

  The other day my laptop has been rather slow so I asked my friend for help. She looked through my downloads and would like to know something, and neither he nor I knew what it was. He had something to do with audio. It has been deleted and thinking that it contributed to the slowness of my laptop. Now my sound doesn't work! The speaker in the lower right corner just icon a mute symbol on it and when I go he said "without headphones or speakers and plugged" and if I click it, it opens a window of analysis saying that it is the detection of problems, which gave me hope because I thought he could detect a problem, but then he said "Troubleshooting could not identify the problem." "  I'm stumped after stopping again, it restart three times and a lot of research on Google. It's happened a few times but only nearly months between when I just restart it and it goes back to normal, but this time by restarting it has not resolved the problem and the removal of the audio something unknown download gives me a reason to think that he can be paid to whom? (I have a Dell Inspiron with 8.1 to Windows, an operating system 64-bit and x 64 based processor)

  Thanks for any help!

  CHOW,

  Eleanor Baker

  Hello Eleanor Baker.

  Start by using the Windows system restore (type in the search box window system restore or go through the control panel and click on recovery). If you can find a dated Restore Point before when the audio software has been removed, use it. You won't lose any of your files by doing this.

  He does this is not convenient or does not help, the other thing you can do is go to the Dell support to your model page, click on the button drivers, select your OS 8.1, expand the Audio category and download and install the audio driver that will be there.

  Unfortunately I can't point you directly on your support page without knowing the name of full model of your laptop, but you can follow this link where there will be links to all Inspiron models. Find your model in the list and click the link. (Alternatively, you can enter your service tag.)

• laptop does not speakers headphones

  I have a new laptop running windows 8, all of the latest drivers are installed.

  The laptop detects when the headphones are connected, however audio is not speakers headphones.
  Sound will play only for the default audio device selected in sound-playback devices.
  If my speakers are the device by default, then sound will only play speakers and vice versa for headphones.
  Ideally I would have selected headphones as device by default and when they are not connected, sound will be read by speakers, and when connected, sound will automatically produce the headphone speakers.
  I have exhausted all options and think it's a problem with the drivers of windows 8, and all I can do is wait for a update.
  All I have this problem or know a solution?

  Hello world

  I found the solution to this problem. I also had, and it was very awkward.

  Just go to the Device Manager

  Then the "audio, video, and game controllers

  Now, right-click on the device high definition audio and uninstall the driver

  Restart your pc

  Fact.

  This works.

• Need to separate the headphones of speakers on x 51 but does not open realtek, only audio alienware

  Basically, I need to open the Realtek program, but it seems to be more written by alienware audio because it is in my list of installed programs, however, when I try to open it, the only option I get is to uninstall it, after watching a few videos of how find and open the ect, it seems that the audio alienware is instead the realtek program.

  I am wanting to split the sound from my headphones and speakers as currently it comes out both when I want music on my speakers and Skype through my headphones. I know that realtek has an option for what you can do two different audio channels. Earlier when I plug my headphones, it records under involved as well and not a separate playback device. Audio Alienware does not have this option and as I said, Realtek won't open.

  If anyone knows how to get Realtek to open or has a work around fix I would be grateful, thanks in advance.

  It looks like your drivers are twisted. Others have reported similar problems. I don't have this machine. If you solve this problem and use your analogue headset, try uninstalling all audio drivers (and their audio control panels) and try to install the appropriate drivers. Maybe even leave the Windows driver load.

  But you know what would be the easiest?

  Buy a cheap USB for Skype headset. It will use the "sound card" in the headphones. In addition, it is digital for all.

  http://www.Amazon.com/Plantronics-GameCom-780-headset-surround/DP/B00B1KJK22/ref=sr_1_1?ie=UTF8&QID=1424380477&SR=8-1&keywords=Plantronics+gaming+USB

  or

  http://www.Amazon.com/Logitech-Clearchat-comfort-headset-black/DP/B000UXZQ42/ref=pd_sim_e_5?ie=UTF8&refRID=0J0H506KN8KF79G8NA4A

  EDITED: Oops, this other helmet was analog. These are the two digital USB with its built-in card circuits. Corrected message.

• Re: Satellite A200 PSAF6A - his plays through speakers using headphones

  When I plug my headphones into the port, nothing happens, still plays through the speakers.
  Is it drivers or something, because I want it redownload.
  I have a Toshiba Satellite A200 PSAF6A.

  Hello

  This seems to be an Australian series for Toshiba laptop.
  You can find it here:
  http://www.ISD.Toshiba.com.au

  You will find the audio driver and the most recent BIOS.

  But I recommend to check the sound settings first.
  I guess that's a Realtek audio chip in the Realtek audio Manager panel you could supply some parameters that control the headphones and speakers.

  Tab of reading on the right you will find the headset by clicking right into this and check the options that are available.

• HP laptop - 15-ay015nx: audio come from two headphones and speakers

  Hello

  When I plugin my headphones and play an audio then sound coming from headphones and speakers

  so please guide me how to solve this problem

  This problem arises when I reinstalled windows 10 on my laptop

  Thank you

  Hello

  Try the following.

  Depending on whether you have installed the update of Windows 10 birthday or not, download the installer of Realtek HD Audio relevant on the link below and save it in your downloads folder.

  Windows 10

  Windows 10 anniversary update

  When finished, press and hold the Windows key and press R

  In the run window, type devmgmt.msc and press to enter.

  In Device Manager, expand sound, video and game controllers.  Right click on the Realtek device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the driver for Chipset on the following link.

  Windows 10

  Windows 10 anniversary update

  When the reinstallation of Chipset is finished, stop the laptop.

  Disconnect the power adapter and remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  When windows has reloaded, open your download folder, right click on the installer of Realtek and select "Run as Administrator" to launch the installation.  Once this done, reboot the laptop and let windows load completely for a few minutes before checking.

  Kind regards

  DP - K

• Satellite L500: headphones and speakers to play simultaneously

  I have a Satallite L500. I have problems with my sound.
  When I have my jacks for headphones insert and play something, his fate as the helmet that the speakers of the laptop.
  I want to disable the laptop speakers, but still receive sound in the headphones.
  There is a horrible "echo" when both headphones and speakers are on at the same time. I'm new to Vista and for the life of I can't understand what is happening.

  When I got the laptop everything worked fine. Then I bought some speakers for all the times that I wanted to listen to external speakers.
  I unplug headphone jacks and connect the speaker plug.
  Since that, whenever I plug the headphones also plays the laptop speakers.

  Also, when I got the laptop whenever I would plug into the headphone Sockets, a pop-up message would be on the screen indicating that the microphone and audio jacks have been detected. I no longer get this message.

  Any advice would be appreciated.

  Thanx

  Hello

  I think that your L500 supports the Realtek audio driver.
  My unit with Realtek audio chip has a manager of its installed Realtek, which is located in the Panel!

  Check the settings there.
  In Realtek Manager of its label of speaker on the right, you will find analog and digital outlets.
  Right click and check if you can disable the sound through the speakers while the headphones are connected.

• I closed my laptop (Macbook pro 2012) screen with a day and immediately after 30-40 minutes his does not starts once again.

  I closed my laptop (Macbook pro 2012) screen with a day and immediately after 30-40 minutes his does not starts once again.

  Hello Varshil07,

  Thank you for using communities of Apple Support.

  If I understand your message, by updating your Mac you have forced stop, or you have closed the lid, and now it does not start.  To start, I suggest that try you to start in safe mode by following the instructions below.  For later use, it's a good idea to not force the computer to shut down or close the lid while it is up to date, because it can cause problems.

  1. Choose the Apple menu > shut down.

  2. After your Mac stops, wait 10 seconds, then press the power button.

  3. As soon as you hear the startup tone, hold down the SHIFT key.

     You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.

  4. Release the SHIFT key when you see the gray Apple logo and progress indicator.

  To exit safe mode, restart your Mac, but no press during the startup.

  OS X El Capitan: start in safe mode

  Have a good.

• HP ENVY notebook: Headphones not detected on HP ENVY laptop

  Headset/headphones not detected by the laptop when it is inserted into the audio jack.

  tried several headphones which none were detected despite working on other devices.

  USB headset is detected.

  Have updated audio drivers using HP support Assistant and manually and not always no chance.

  Had this problem because the laptop has arrived.

  Any help much appreciated and I will try to provide all other necessary details.

  Hey @ABONKERSCHICKEN,
  
  Welcome to the Forums of HP Support! This is a great place to find solutions and help our community!

  I understand that you are having problems with headphones not detected on HP Envy laptop. I'd be happy to help you with that.

  To begin, I would like to follow this document: computers HP - solve the headphones and headset problems

  Please hold me.

  By pressing the Thumbs Up button below, you can always say thank you!
  
  See you soon.

• Satellite L500 - the sound coming from headphones and speakers

  Hello world

  My problem is about sound.when I put the headphones in my laptop, the sound just two headphones and speakers.
  How can I solve this problem? If can't, I can't use my laptop in attendance.

  Hey,.

  What OS is currently installed on your computer?

  Is the headset itself works because you can listen to the sound with headphones so for now I doubt s a hardware problem

  In any case, perhaps the problem is only linked to its driver and updated it could solve the problem in your case, I would check the Web from Toshiba site to download the latest version.

  Check this box!

• in Outlook Express, how can I send the same message to a group important (in the address book already), but have to each recipient can only see his name (not the Group)

  In Outlook Express, how can I send the same message to the large group (already in the address book), but have to each recipient can only see his name (not the Group)?

  To use the functionality of the BCC (Blind Carbon Copy), in a new message window, click View | All headers and type the addresses separated by a; Or: Click the button to. You will see your list of contacts and the choice to put them in the To, CC, or BCC field. Click on an address, and then click BCC to add it. Repeat for all of the contacts you want. (Note: most of the providers have limits as to how many messages you can send both a. 25 is common, but it varies).

  Put your own address in the box to. That's the only name/address that any recipient will see. If you leave the field empty, some people may not receive e-mail because of message rules they put in place, or restrictions imposed by their ISP.

  You can also make an entry in the address book using your e-mail address, but put something like the mailing list in the area of the display.

  *********************

  You can also create groups if you send e-mail to the same people often.

  To create a group of contacts:

  You can create a single group name (or alias) to use when sending a message to several contacts at the same time. Just create a group name and add individual contacts to the group. Then just type the name of the group in the box for when you send mail.

  1. in the address book, select the folder in which you want to create a group. Click New in the toolbar, and then click New Group.
  2. the Properties dialog box opens. In the group name box, type the name of the group.
  3. There are several ways to add people to the Group:
  a. to add a person from your address book list, click Select members, and then click a name in the address book list.
  (b) to add a person directly to the group without adding the name to your address book, type the person's name and e-mail address at the bottom of the Properties dialog box and then click Add.
  to add a person to both the Group and your address book, click New Contact and enter the appropriate information.
  (d) to use a directory service, click Select members, and then click search. Select a directory service in the drop-down list at the end of the text box. After finding and selecting an address, it is automatically added to your address book.
  4. Repeat for each addition until your group is defined.

  Note

  a. to view a list of your groups separately from the list of address book in the address book on the view menu, make sure that folders and groups is selected.
   
  b. you can create multiple groups, and contacts can belong to several groups.

  If you want to send to a group without addresses are displayed for each recipient, open the address book and make a new entry. Enter the name of the group in the area of the display, but use your address. (Some Internet service providers require a legitimate address in the line to and recipients will know it's from the Group).

  Click on the button to. Enter the name of the group using your address. Enter the group in the BCC field.

• How to use headphones and speakers at the same time

  I want to use headphones at the same time that I use the speakers.

  I am hard of hearing and need the LOUD volume. When others are watching a film, projected on HDTV, they won't let me turn the volume up to where I need it, which is why, headphones and speakers at the same time.

  I use Windows 7, I want to stick with Windows 7, so I want a Windows 7 solution.

  If there is no solution for Windows 7 and there is a solution using Windows 10, then and then only, I will be upgrading to Windows 10.

  Using headphones and speakers was possible under Windows XP. I think that a kid at Microsoft, with a regular audience, thought this feature was redundant and removed. Large.

  Macs will play through the headphones and speakers, so maybe it's time to buy a Mac!

  Hi Bob,

  Thanks for posting your query on the Microsoft Community.

  With the description, I understand that you want to use headphones and speakers at the same time on your Windows 7 computer. I will certainly help you get this fixed number.

  I suggest you check the suggestions contained in below mentioned thread and check if this is useful:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/headphones-speakers-at-the-same-time/7ed31bcf-3762-430D-9c9f-e6967d670d0e

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• Audio playback through headphones and speakers

  Headphones or speakers in windows 7, it cannot have them both?

  Looked at other issues, nothing seemed close.

  My machine has dual boot, Windows 7, XP and Vista ultimate and now XP. In XP and Vista I have the speakers and headphones plugged together, playerd noise, so I could use one or the other by plugging them in front and back taken audio.

  This allows me to play during the day with speakers, and then at night with headphones and no round reaching under my desk to remove the cables.

  Now I use windows 7 and many other issues I have with it, I can't play with speakers or headset until I went through a lot stupid click on deactivate one or choose the other as a default value. Why this has been changed in windows 7 after Vista, it seems totally useless logic. I can turn off my speakers with the power button and get the helmet works. Now, I'm either or. So my new IR headphones are wasted. Please, someone tell me there is a work around?

  It's little interference silliness like this that give me want to stay under XP.

  Much thanks in the meantime someone has found a work around.

  I have my Jabra GN9350 both my speakers for computer, audio playback at the same time. :)

  Here's the trick (and it is verified on 3 other systems Win 7):

  (1) R click on your speaker icon, select "Recording Devices" (if you have the sounds dialog box to the top, it's the 2nd 'Recording' tab)

  (2) click on R in the white space, make sure that the TWO "show disabled devices" AND "show disconnected devices" is checked.

  (3) * now, this step will take some thought for each computer used: on my laptop (HP Elitebook) I get a "Stereo mix" device, ACTIVATE this device.

  4) click on properties, click on the "Listen" tab

  (5) check the box 'Listen to this device', also change the drop-down list below 'read through this device' to be your second audio device

  -To check that you have done this correctly, go back to the tab of the dialog box sound reading, you should now see two of your audio devices showing green graphics small displacement.

  Here are the specific parameters that I have on my laptop, maybe this will help you with your settings:

  Speakers - GN9350 (by default the communications device)

  Speakers - SoundMAX Integrated Digital HD Audio (default device)

  Feature 'Listen' stereo Mix - point this device on my GN9350 headset.

  Paul

• I'm currently implementing textcolor() in devc ++ but his does not work

  Original title: devc ++

  Respected Sir/Madam

  I'm currently implementing textcolor() in devc ++ but his does not work. Can you please help me... ?. Please give me tha example code simple. Thank you.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home