How to configure the preferences of the user for each platform

Similar Questions

• How to measure the time for each mapping?

  I use oracle11g with OWB.
  
  I have several mapping and each dimension tables to update the mapping.
  
  I want to measure how long it takes to complete each mapping. What is the best way to find the total time for each mapping.
  
  One way is, we can have POST MAPPING and PROCESS of MAPPING PRE. I can trigger the stored procedure to enter the start time and the end time of each match. On this basis, I can calculate the total time for each mapping. But I have 50 mapping. Now, I need to write 50 different stored procedure and open the POST-PROCESSING of the MAPPING and PROCESS OF MAPPING of the PRE for each mapping. It is complex.
  
  Is there another way, we enter the total for each mapping of execution? Y at - it that no data in OWF_ MGR dictionary can help on this?
  
  I would be grateful if someone can help me on this.

  He will remain forever unless you purge it explicitly.

  See you soon
  Katia

• How to count the records for each region day and conditional

  Hello
  
  I need to create a report where I list activities for a month and the number of specific Type for each days activities. something like below
  
  Number of days in the month where Type = 'A' Count where Type = B
  January 1, 2009 2 3
  January 2, 2009 7 6
  January 3, 2009 8 7
  ----
  
  -----
  January 31, 2009 4 6
  
  I tried with the creation of conditional region for each row of table for every day, but it does not work. I use below for conditional region-
  
  <? xdofx:If substr (to_date ('20': substr (Planned, 9, 2) |)) » -'|| substr (Planned, 1, 2). » -'|| (substr (Planned, 4, 2), 'MM-DD-YYYY'), 4, 2) = 01? > <? Planned? > <? end if? >
  But it is not functional and do not know how to count records in the table for each date as well.
  
  Can anyone help in it as soon as possible. I'm quite new to BI.
  
  Thnks

  You can mark it as resolved... :D

  Kind regards
  Colectionaru

• How to configure the adapter for network WRT54G wireless

  I downloaded the driver for a tenda usb adapter.  What else should I do to connect to the network WRT54G? I am currently connected via an ethernet cable. Running Windows/7.

  TIA,

  Phil

  OK, I found out how locate network and connect. The only problem was that I used the password instead of the key WEP.

• How to configure the switch for JMS bridge

  Hello
  
  I tried with the selector option when working with several bridges, here is the scenario that I applied.
  
  Created five queues ( Q1, Q2, Q3, Q4, and Q5 ) and configured JMS bridge Destinations with each queue with the factory of unique connections ( CF1, CF2, CF3, CF4, and CF5 ) and baptized as D1, D2, D3, D4 and D5.
  Then created JMS JB2 bridges with D1 source and destination as D2. Similarly the JB3 as D1-D3, as D1-D4 JB4 and JB5 as D1-D5.
  And sector for each of the JB2 JB3 and JB4 JB5 as two, three, four and five respectively and reboot after the changes.
  
  Now I expect the following scenario to work
  By pushing the message to Q1/CF1 with two in the content of the message, so wait for the message to be delivered to Q2/CF2 through JB2, but messages is not moved by JB2.
  Similarly, message pushed to Q1/CF1 having three in the content of the message, so waiting for the message to be delivered to Q3/CF3 by JB3, but messages is not moved through JB3. Similar behavior for other messages with four and five in the content of the message.
  
  In the bridge configuration, selected QOS as "Atmost" - once.
  
  Note: all configurations were conducted in the same field and the WL version is 10.3.6.0 *
  
  The example message I am pushing to Q1/CF1 say 'two Test Data'* and expect to reach the queue Q2/CF2
  
  Concerning
  Venkata Madhu
  
  Published by: vv * Sep 12, 2012 13:05

  JMS selectors work normally om jms headers and not on the message.

  In my previous post, I see that WebLogic provides an extension "SELECTOR xpath" in this area, although I recommend using standard selectors when possible. See my previous post for more information on the syntax of the selector, etc.. The best resource on selectors is the javadoc for javax.jms.Message (http://docs.oracle.com/javaee/5/api/javax/jms/Message.html).

• In BI Publisher how to know the details for each role

  Hello everyone

  How will I know what is the specificity of each role

  What user role should I choose for users to open the editor of BI and just to view the reports.

  What is the difference between

  Consumer of BI

  Author of BI

  The APP Tester

  AdminChannelUSer

  and the rest

  I tried to look it up, but I can't find more information

  Thank you

  It is consumer of BI...

  Role of the BI consumer has under permissions added by default.

  oracle.bi.publisher.runReportOnline - open (execute) reports grants permission and display the document generated in the report viewer.

  Oracle.BI.Publisher.Schedule report - authorisation of subsidies to create or change jobs and also manage and browse jobs.

  oracle.bi.publisher.accessReportOutput - authorization of grants to browse and manage the output and labor history.

  oracle.bi.publisher.accessExcelReportAnalyzer - authorization of grants to download the Analyzer for Excel and to download data from a report to Excel using the Analyzer for Excel.

  oracle.bi.publisher.accessOnlineReportAnalyzer - authorization of grants to launch monitor and manipulate the data.

• How to enter the caption for each photo in a slideshow?

  In design mode, my slideshow is visible only one photo. How page through the other photos so that I can put the correct caption on each?

  Hello

  To see more pictures, you can simply click on the Widget to select. Then click on the white arrow in the blue circle that appears at the top right of the Widget (which opens the properties of the Widget).

  Now in the properties/options of the Widget, check the "Prev" and "Next" options (if they are not already checked) in the parts section.

  Now on the Widget, you should get Previos and following arrows available. You can use these arros to navigate through the Image, and after uncheck the same options before you post if you want to not only these arrows are available to users.

  Please take a look at the screenshot that can help:

  

  Kind regards

  Sachin

• How to select the values for each check box in a group of records

  Hello
  
  I have a requirement in form 10g. In this form there are 10 records are display each record has a checkbox is there if I click on the check box save number one and number three and make some changes in the text field (field adjustment is the number data type) and then finally, I want to see the total a total amount called field.
  
  In this, my question is how to select specific to a group of records records? and finally these selected records are inserted in a table.
  Because I am not able to read these records at a time.
  Is there any table to define a record group to fetch each of them individually for example Rec [1] Rec [2]... like this if yes please suggest me the steps how to do this.
  
  Thanks in advance
  Prasanna
  
  Published by: user10315107 on December 17, 2008 23:44

  OK, so you want to shoe the total amount in the form itself (I guess that somewhere under the dashboard lines?).

  You can do this easily using formulat elements:

  1 create a new item in your block where the field amount is places, set "section of the database" on the 'No', 'calculation mode' to the 'formula' and the 'formula' himself to something like:

  CASE WHEN :BLOCK.CHECKBOXITEM=CHECKVALUE THEN :BLOCK.AMOUNT+:BLOCK.ADJUSTMENT ELSE 0 END;
  

  This formula returns 0 if the checkboxitem is not checked, otherwise the sum of amount and adjustment (of course you can adjust the names of elements and the value for 'Checked')
  2. place the element in the layout, if you wish.
  3. set the property "Query all Records" to "true" for your block elements, this is necessary for the calculation to work
  3 create a control block to keep summary article in a, "Single Document" set to 'True '.
  4. place a new element in this control block, set 'Calcuation mode' to 'Summary', 'Summary block' to your block elements, 'Summary point' in newly created formula section in the block elements
  and function of synthesis for the "sum".
  5. place the element in the layout

  She's.

• How to set the time for each slide in the slide show?

  Length of blade, pan and zoom, melted chained, etc. is adjustable for each slide or have all the same?

  If they can be individualized, what I don't see.

  Use Lightroom CC 2015.

  Thank you

  Leo Sopicki

  These features are not in the Lightroom Slideshow module. You will need to use another third party software to create these types of slideshows.

• How to configure the user name &amp; psw for VPN connection in WRT54G?

  Hi all:

  I would like to enable VPn in WRT54G.

  Cann't find where to set up the username & psw.

  Could someone help?

  Client is necessary to set up the username & psw if he did not need to put in place the username & psw to WRT54G?

  Thank you in advance

  Chen min

  It doesn't have a VPN service. It doesn't have a VPN server. You make a connection to the VPN client to the WRT54G.

• How to configure the VPN for Xperia phones

  I know that this does not work for many after the upgrade to KitKat but I just wanted to know how other users were using previously.

  Could you give me the settings or help me how to use these settings.

  VPN does not of course for a lot, but I guess that Sony will do something so he can fix it. But tell me how you used earlier. I am interested in knowing. Never used because I found it difficult. People told me that it is a sort of proxy to surf the net anonymously.

  Sachin4u wrote:

  ... VPN works of course not for many...

  Where did you get this info? I had this problem a few weeks in this forum channel and no useful response has been posted.

  But anyway: on Android 4.3, I added a VPN connection with the 'IPSec Xauth PSK' type and the pre-shared key. At the opening of the connection, I entered username and password. A few secconds later than the VPN connection to my home network with router Fritz Box has been implemented.

  Hopefully, I could help you, Titus

• How to configure the DDC for testing?

  Hi all

  I would like to implement Cisco Secure Desktop in our WebVPN configuration, but I need a way to set up and test without making our existing of WebVPN users.

  It seems to me that if I create a Windows with a criterion that * only * my machine test matches, all other users will fail. If I activate the features "when the location corresponding fails", current users won't see a difference.

  Is this correct? Furthermore, with this configuration, VPN tent making out the CSD software when users connect?

  All advice is appreciated.

  Thank you

  -Steve

  Yes, existing users will not see a difference "when the corresponding location fails. This option "what corresponding location fails" helps Windows customers use VPN to surf the web as a minimum connection option, if the client computer does not match any of the criteria of the configured locations.

• How to configure the proxy for firefox androidversion?

  How to set parameter for android version of firefox?

  Thank you

  Hello

  I have had a look and found this page that should help you.

  If this is not the case please come back here and we'll see what we can do to help.

• Satellite Pro U400: How to configure the VLAN for the Marvell Yukon LAN control.

  Hi all
  I need to access the 2 VLANS with the controller LAN Marvell Yukon 88E8072 for my Satellite Pro U400. I installed the necessary Configuration utility network Marvell tell me after installation, VIRTUAL local network settings must be mounted in the Device Manager (Windows 7, right click on computer, properties, click device/network management adapters/double on Marvell Yukon 88E8072 PCI-E Gigabit Ethernet Controller), I can't find a thing to configure here but wake-on-LAN.

  Any suggestion? Thank you!

  Michael

  Hello

  I think that in this case, you can use a network switch.

• How to configure the network for Windows XP boot

  I have a laptop from nec.
  the cd player does not work and usb either.
  It has an ethernet jack, but I don't know how to set up at the start of the network
  Please help thanks

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner