How to stop a virtual machine to automatically close after a period of inactivity
I have a VM 2012 server acting as a domain controller in a test environment. I do not work on it a lot, but he must run as I work on test VMs (W7 and W8).
The problem is after a period of inactivity, the server vm stop all services and stops. I did some research and found some vague allusions to a script that can be changed in vmware tools, but I am not able to start a GUI tools to look at again. I have re-installed the tools, but still cannot open any type of interface to work with the tools, and I don't even know if this is the right place to resolve this problem.
Also has anyone seen this problem?
What is a facility properly licensed and activated Windows Server 2012?
Tags: VMware
Similar Questions
-
We meet just power down and lost electricity ESX host.
When we start the ESX host, we can on each individual virtual machine.
Y at - it a setting that we can put in place for these VMs critics may start se?
Your opinion is requested.
Thanks for your advice. He agrees with your saying that the start / stop sems to be buggy.
It's only disable it every time that you enable VMware HA.
But it works (if enabled) and may be useful to define how the system starts up.
André
-
Automatically remove virtual machines for VDI pool after the period of time
Use us Vmware View 5.0 but soon move to 5.2 and have need features to automatically remove all the virtual machines in the pool selected after a certain period of time. We are at disposal VDI for a project that will end for 3 months and after this time, we want to remove this VMs automatically. Is this possible?
It depends a bit exactly what you want to do, but you can plan everything a powercli-script to remove the virtual desktop at a certain time.
Another option that I usually prefer is to manage the rights with the ad groups.
So when you want to revoke a users access to a desktop computer, simply remove the user from the group, which should be easy to do with a script.
Linjo
-
Virtual MACHINE starts automatically after a power outage of the entire site?
Hello
We use ESXi 5.5.
If there is a power for the datacenter failure, ESXi hosts must be restarted when power is resumed.
We wonder if VMs will be launched automatically to the top? If not, this means that we must allow the "starting the Virtual Machine / stop option.
If we put a number of virtual machines in "automatically start", such as VM1, VM2, VM3 on ESXi Server one, VM4 VM5 ESXi Server b. Virtual machines are migrated between ESXi servers and how they can keep the boot sequence?
Your opinion is requested.
Dear Tony,
I ask you to create a vApp and configure accordingly on your vCenter boot order.
See you soon,.
Billon Manogaran
-
I'm looking for a script to stop vm...
Script works fine, but I have a few Questions or details
$csv = import-csv C:\xxx.csv
Foreach ($line in $csv)
{
Write-Host “====================================================================”
Write-Host "$line treatment".
$vminfo = get-view-Id ($line.vm) USER.USER
Write-Host "checking the VMware Tools on $line... »
# If we have the VMware tools installed
If ($vminfo.config.Tools.ToolsVersion - eq 0)
{
Write-Host "($line.vm) don't have vmware tools installed, strong power this one.
# Hard power off.
Stop-VM ($line.vm)-confirm: $false
}
on the other
{
write-host "I'll try to stop $vm.
# Turn off with elegance
Get - VM ($line.vm) | Stop-VMGuest-confirm: $false | Out-Null
}
}
1. my code below what I'm missing / or hurt?
$vminfo = get-view-Id ($line.vm) USER.USER
Write-Host "checking the VMware Tools on $line... »
2. Tools a lot of combination
Tools installed - but not running
tools not install
Are that both will have to stop-vm?
3.
I got a simple code, it will cover the tools stuff?
$vm = Get-VM
$vm | where {$_. Comments . State -eq "Running"} | Shutdown-VMGuest -confirm:$false
$vm | where {$_. Comments . State -eq "NotRunning"} | Stop-VM -Confirm:$false4. I want to stop 50 virtual machines simultaneously, how the
Your script seems to be ok.
When the VMware tools are installed you can do a gracefull shutdown (Stop-VMGuest) within the guest where OS the obligation for the VMware tools.
The next option is to stop the virtual machine (VM-Stop), with what would be the power button on a physical computer.
No phasing out of the BONES and a potential risk on the corruption of the OS.
With switch RunAsync that the cmdlet returns immediately, it will not wait until the underlying vSphere method is complete.
The method will continue, but in the background.
You should check these tasks to background (Get-task), to monitor the successful completion.
To manage VMS in batches of 25 and wait 60 seconds between batches, you could do something like that
$vms = get - VM
$step = 25
$start = 0
for ($loop = 0; $loop - the ([math]: ceiling ($vms.)) Step Count / $)-1); $loop ++) {}
$vms [$start... ($Start+$Step-1)] | where {$_.} Guest.State - eq "Running"} | Stop-VMGuest-confirm: $false - RunAsync
$vms [$start... ($Start+$Step-1)] | where {$_.} Guest.State - eq "Keep"} | Stop-VM-confirm: $false - RunAsync
sleep 60
$start += $step
}
-
How to resize a virtual machine using vSphere client
Hi all
I have a virtual computer on an ESXi 4 server but I am not able to resize. So far I have stop the virtual machine in vSphere client, selected the settings then went to Hard Disk 1, Disk Configuration section everything is gray so cannot be changed. The type is listed as thick and the version of virtual machine is 7. How can I go on the increase in the size of the disk of this virtual, or any other machine also?
Thank you
Jamie
Remember that you cannot increase the size of a disc if there is a snapshot, but if the option is gryed out, it looks more like a permissions issue. You do that connected directly to the host of ESXi, or through vCenter?
-
How to stop a download to open automatically
How to stop a downloaded file open automatically, because it is really frustrating when I download music and videos as well as the files play automatically.
It is a question, I intend to answer that I discovered the answer today and could not find it in the community. Apple support also could not solve this problem.
Answer:
In Safari preferences in the general section, there is a small box at the bottom that is checked by default, clear this check box.
The box is called:
Open your 'safe' after downloading files
'reliable' files include movies, photos,
PDF documents and text, sounds and
Archives
In Safari preferences in the general section, there is a small box at the bottom that is checked by default, clear this check box.
The box is called:
Open your 'safe' after downloading files
'reliable' files include movies, photos,
PDF documents and text, sounds and
Archives
-
How to stop programs to start up automatically in Windows 7 Professional?
How to stop programs to start up automatically in Windows 7 Professional?
Specifically, the WINDOWS MESSENGER - Windows Live ID Sign in page started appearing whenever I turn on emachine th. I don't need, how it stop? Tahnks for your help.
http://www.Instructables.com/ID/how-to-stop-Windows-Live-Messenger-from-popping-up/
Read the above.
For any question on Windows 7:
http://social.answers.Microsoft.com/forums/en-us/category/Windows7
Link above is Windows 7 Forum for questions on Windows 7.
Windows 7 questions should be directed to / stationed there.
You are in the Vista Forums.
See you soon.
Mick Murphy - Microsoft partner
-
I have Win7 Pro SP1 x 64. I downloaded WindowsXPMode_en - us.exe (from Microsoft downloads) and run it. The installation seems to work OK (I've specified a different location for the parent virtual hard disk file). Then, installation happening and I provide the information requested (name of user and password for the XP Mode), updates Windows and OK to the issue of sharing. The installation program then reports the following error:
The disk hard virtual parent is in a saved state. Discard the saved state or stop the virtual machine and try again.
I get the error even if I try manually configure XP Mode (use the Setup Wizard). I downloaded the installer XPMode (3 times) and reinstalled several times, always with the same result. If it helps, I can't locate anywhere .vsv file.
Any idea what's going on?
Original title: XP Mode Setup error
Hi smithnr10,
You must post your question in the TechNet forums because it caters to an audience of it professionals.
To do this, you must consult the link-
http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threads
Hope this helps!
-
How to move the virtual machine from one cluster to another cluster
How to move the virtual machine from one cluster to another cluster
If two Clusters are in the same data center, you could do a 'live' migration or vMotion, if that's the case. If the virtual machine is turned off, it may be migrated regardless of the data center.
-
How to save a virtual machine before you remove the disc
Very new to VMWare, with Essentials 5.5 the VSphere Client. I have a virtual machine, I would like to remove from the disk, but want to copy, in the cases where I need to turn the crank upward once again, the host before the withdraw. Is it fairly easy to achieve? However, I have to remove the inventory, by copying the file to the vm from the data store, add it to the inventory then disconnected the floppy again. Would support this work if I already needed to put the virtual machine?
Thanks for any idea!
You can download the files of the virtual directory of the data store computer and that you need to remove the inventory, just stop the virtual machine to release the locks on files.
-
How to access the virtual machines to different physical network?
Hello
I'm new to ESXi, can someone tell me how can I access virtual machines on the physical network existing in case I use different IP classes? Physics of the network by using the class C IPs and I assigned IPs to virtual machines of class A? If it is possible, then, what are the steps?
In fact, I installed exchange 2010 VMs and also want to access the email accounts of physical network.
Thank you.
vmjunki wrote:
You mean there's no way in ESXi to configure the way so we can access the virtual machines to physical network? without third-party applications.
Because it is impossible for the various networks IP connect without a router, you must have such a device. There is really no difference in that in a pure virtual or physical environment.
You might think the ESXi host as a box with one or more servers (virtual) inside and one or more layer (virtual) two switches, just like a small server room. This means you will need to provide the same type of connectivity that you would have to a new server room with machines configured with addresses in a different IP network range.
-
How to use a virtual machine that requires more physical memory that I have?
A colleague send me a Linux VM, he built on a machine with much more physical memory 4 GB I have in my Macbook Air. When I started the virtual machine in Fusion, he said that the more physical memory virtual machine that I had and suggested that this would reduce the memory for the virtual machine to 3 GB. I said OK and the machine started. I did a lot of work in this virtual machine. I suspended the VM because I needed to recover a portion of memory that he used for another application.
When I try to start the virtual machine now, it says that it requires 4 GB of memory and that I should quit some applications or restart to free the memory required. I tried both without success.
Why the parameter / 3GB was not recorded when I suspended the VM?
Given that I can't change the memory required for the virtual machine until it is properly closed and since then I can't stop the virtual machine without unsuspending it, I suspect that the VM is toast.
Is it possible to recover the virtual machine?
With VMware Fusion closed, you can remove the file from .vmss to
to reset the VM to a shutdown state. Note that whatever it is not recorded when he was suspended will be lost. -
Commands to start and stop a virtual machine hosted by VMware player
Where can I find the commands to start and stop a virtual machine hosted by VMware player on a host Windows Server 2008 R2 (64-bit)?
I need to start and stop the virtual computer from a script as I could do this by selecting the ' power on ' and his 'guest stop' or at least 'power off' options of the GUI of VMware player.
If a control interface is not available, is available if I update to VMware Workstation?
Concerning
Marius
With the player, the VIX API is a separate download (on the same page you downloaded the install drive in), so I guess you will have to install the separate package to use it. But it's pretty easy to do...
-
VShield Configuration Manager 4.1 (and how to protect a virtual machine?)
I have 2 ESXi hosts currently configured in vCenter 4.1. Before vShield installation Manager, he had 3 vSwitches present on each server; a regular and two distributed.
vSwitch0 - connected to vmnic0 - has management and production of network 1 10.168.90.x
VLAN 10.1 - VMFN connected to vmnic1 on each host - connects to the private physical network 10.1.x.x
VLAN 10.2 - VMFN connected to vmnic2 on each host - connects to the private physical network 10.2.x.x
After you install vShield Manager in a new virtual machine and then to deploy vShield Zones to each ESXi host, develops a new vSwitch
vmservice-vswitch - again group of ports in Virtual Machine vmservice-vshield-pg - not connected to any physical cards
VMS individual vShield-FW created for each host have connected network cards as below
Production network normal 1 - VM Network adapter (attached to vSwitch 0).
Production network normal 2 - VM Network adapter (attached to vSwitch 0).
Adapter 3 - vmservice-vshield-pg network
I tried to connect my VMs to the network vmservice-vshield-pg in order
to protect them and place them behiind the firewall. However, who has
seem to work, and my VM has lost network connectivity.
How to protect a virtual machine that needs to connect to the normal production
Network (on vSwitch0)? Is there any configuration steps I'm missing?
What happens if I want to connect a virtual machine or one of its network cards to one of the 10.1.xx
or 10.2.x.x networks rather than the normal 10.168.90.x network? What
additional steps should I make? The new 4.1 documentation is not
helped at all, and it seems that the old vShield Zones 1.0 docs are not
applies to all.
There is no need to change the virtual computer is connected to the network.
Just activate/install vShield zones on your hosts and add rules to the vSwitch or data center.
The virtual machine will be becomes protected if no error is displayed.
Maybe you are looking for
-
"Send to back" broken into Pages 5.6.2
After you import an image into the 5.6.2, Pages I am unable to use the features of arrange the image as "advance" or "put in the background." This is true for importing images or shapes I create. These fix options (whether in the drop down menu dropd
-
Add/Remove programs and exe files does not
My Windows XP system has developed a strange (and annoying) issue that no longer allows me to double click on the shortcuts of programs or EXE files. When I do, I give myself a menu asks me what program I want to use to open the file, as if I was tr
-
Hello How can I install Windows XP Setup (F6) use an instead of a floppy drive usb flash drive to find the drivers for a disk sata hard. Kind regardsImane
-
Here I would start troubleshooting in a fglam that takes too long to stop? Solaris 10 Flgam version 5.6.2.4 The full list of former agents running [myname@myhost bin] $ sudo. / fglam - wq 2013-06-12 22:18:48.000 INFO [natives] send request stop at "A
-
HP Officejet 6500 general Printer error cox610000f6
Can anone tell me what an error message means COx610000f6 and if so, can it be fixed and how?