HP 15-r203TX: graphics not detected.

Similar Questions

• Alienware 14 - integrated graphics not detected in BIOS

  Recently my NVidia graphics card was not detected in the bios and in Device Manager, so I contacted Dell and they replaced my motherboard (NVidia is built into the motherboard). Now I can see my NVidia card in my system. But original window 8 still gives me blue screen error (ERROR FATALE VIDEO) and when the pc is restarted, NVidia has also disappeared. But I see once again when I shut down and turn on again. So, I use my own 8.1 window, and all is still ok, now with the exception of two errors.

  First one, it of my intel graphics hd went and not detected in the BIOS. I don't want to run on NVidia card all the time.

  Second, one is that I can not install my killer LAN driver for my LAN network. I can only install driver wifi.

  Is it because of 8.1 window problem or hardware problem? I hope the technician Dell can help me. Thank you.

  Now, I solved the problem. Thanks for your advice. Problem is that in windows 8, I can see the two crads graphics in Manager mode optimus devices or not. But in windows 8.1 I don't see them both when I'm in the mode optimus, only nvidai map is visible in Device Manager. But can see them both in mode no optimus. Hope that the answer will help others.

• Latitude E6410 NVIDIA graphics not detected

  I tried to install the nvidia drivers, but the card was not recognized. Then I restarted the system and you press f2 and realized that it is not detected even here. What can be the problem?

  Discrete means there is an nVidia chip in the system. UMA means it is Intel only.

  NVidia chip is a purchase option in, usually on the high-end models.  If this option is not selected for purchase, the default is video only Intel.

  The list of the original at support.Dell.com Setup will tell you that you have.  If there is a reference to the UMA, it is Intel-only.  The configuration list will be an entry for the NVS3100m if it is present in the system (and without reference to the UMA).

• Alienware 17 - integrated graphics not detected in BIOS - cannot switch to the integrated graphics card

  As the title says, I own an Alienware 17, bought around November of 2013. My NVidia GeForce GTX 770 M runs like a champ. But I can't go to the integrated graphics card (should be Intel HD Graphics 4600). I tried the Fn + F5 (several times). It is said that it is "optimal". Tried with the laptop plugged in and not plugged. I looked in Device Manager and there is only a single index card (NVidia) view. I then booted the BIOS and it said: 'Integrated Graphics - undetected. " I have the latest BIOS version available on the support Web site.

  Don't know what to do at this point. I should have integrated and discrete, but only discreet is detected. I want to be able to switch to the Intel card, so that I can mess around with things like the Intel WiDi and want to also DO NOT perform my NVidia card all the time, and because I'm not playing games all the time.

  Any ideas? All support staff out there who can help out me?

  Cub... I think I might have answered my own question... My laptop has the option to display 3D 120 Hz. For this reason, 'Optimus' technology is not available (I think I say this right), and so I can't go to the graphics card Intel because of the way the 3D display is wired. There is a YouTube video that I saw what explains the all (link below).

  "Alienware 17 with 120 Hz 3D display has no integrated graphics":

  https://www.YouTube.com/watch?v=RJ3IRvCkllg

  Then... Not sure that I'm too happy with Dell right now. One of the advantages that I looked forward had to be able to change maps and play with some of the features of the Intel WiDi map in particular. When I bought the laptop, I was not made aware that I would lose the functionality of upgrade of the screen to get the 3D option. Would have been nice to know, so that I know what are the trade-offs.

• integrated graphics not detected

  Dell630 update from XP to Windows 7 64-bit (4 GB RAM). System X 3100 card onboard / integrated, he can't see display adapters after upgrade - watch 'Standard VGA '. Get multiple caveats: "hardware acceleration is disabled or not supported by your video card reader» Tried to install the X 3100 Intel 64-bit Win7 driver, the installation failed due to "ERROR 0x7FB: no INFs are that correspond to active devices on the system. Anyone to prove the falsity of the Mac ads?

  Why have we to prove that Mac advertisements are far from being false?

  Probably the computer laptop Dell Latitude 630, Dell chose NOT to provide compatible video drivers Windows 7 for your model, and had checked with Dell before you buy Windows 7 and upgrade, you discovered this for yourself and perhaps save yourself time and money.

  The best you can do is try the Vista 64 driver provided by Dell and if it doesn't, return to any operating system for which you have the installation media.

  You can contact Dell support and ask if they are still likely to release the Windows 7 drivers for THEIR hardware... Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

• CQ5110y - new graphics card not detected

  I have a cq5110y that I am trying to upgrade the graphics on.

  I just installed a bigger power supply and is working on the installation of a Sapphire Radeon R7 240, but when I turn on my computer it does not detect the new hardware.  Am I missing a step?  Or is the card DOA?

  The steps to install the new card were quite simple--plug it into the PCI-e slot and connect the monitor.  There was a note to disable any integrated first graphic, so I put the display to PCI-e in the BIOS.  Is that all I had to do to disable the integrated graphics card?  I think that this could be my problem?

  Your Compaq Presario CQ5110Y desktop uses a chipset NVIDIA GeForce 6150SE nForce 430 seems limited to the PCI Express 1.0 version.  PCIe v1.0 is compatible front of PCIe v2.0.  PCIe v2.1 and above is not backwards comptible with your motherboard. Your Sapphire Radeon R7 240 seems to use a PCIe v3.0 card and is therefore not compatible with your computer. Please return the card for a graphic card PCIe v2.0 solve your problem.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• Pavilion g6 2303 sh dedicated AMD Radeon HD 7670 M graphics card not detected win 7

  Hi, I have a g6 2303 sh laptop pavilion. I use win 7 x 64. I downloaded the driver for my videocard of 7670 M AMD Radeon HD hp page: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4132&lc=hu&cc=hu&dlc=hu&sw_lang=&product=5354...

  and after trying in vain for the amd home page. None of them does not detect my video card.

  This page only shows drivers hp for win8, which I won't use.

  Where can I find a driver for my video card?

  Thank you

  Tom

  Hi, Tom:

  Use the W7 x 64 drivers of th is model g6.  For graphics, simply use the graphics driver AMD, Intel, not one.

  DO NOT USE ALL DOWNLOADS OF BIOS OR FIRMWARE FROM THIS LINK

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5278311

• Sims 3 (win7) and "device 0 cannot run this title, no video graphics card supported not detected."

  Hello

  I just got the Sims 3 for Christmas, and I can't get it started.

  I just bought a new p7-1126 of hp computer that meets all the reqs as documented on the site of AMD System. (win7 64 bit, 1 TB hd, 6 GB ram, amd quad core 2.4 GHz processor)

  This computer has an amd radeon hd 6550d graph with / 3 gb (I think) (which is more than 128 MB recommended)

  and the drivers are up to date.

  I get the error message "device 0 cannot run this title, no video graphics card supported not detected" and I can't seem to do anything to solve this problem.

  I've uninstalled and reinstalled the Sims3 deluxe/ambitions three times now, with the expansion of ambitions installed so the third time.

  I did a lot of other things as suggested in line when I did research but nothing works.

  Help is appreciated and I hope we can get this fixed a problem. Thank you!!

  Hello

  Please provide information of the log of the event viewer.

  Information on the Event Viewer log shows that there is a problem with your memory (0xc0000005 error code).

  I suggest you run a diagnosis of memory on your computer and check if all goes well.

  Click on the links below and follow the instructions on the article to test memory on your computer.

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-know-if-my-computer-has-a-memory-problem

  http://Windows.Microsoft.com/en-us/Windows7/diagnosing-memory-problems-on-your-computer

  Provide us additional information. So that we can help solve you the problem on your computer.

  Hope this information helps you.

• XP Mode in Windows 7 does not detect the ATI Radeon graphics card

  Hi, on windows 7, xp (virtual), the system mode does not detect my graphics (ATI Radeon HD4530). This card is indispensable to run a business application (multimedia program). Can you please help me.

  Thank you, Christian.

  * original XP mode with title - __Windows 7 - (virtual) with ATI radeon HD4530__Christian.* graphics card

  Windows XP mode provides a virtual hardware platform to run XP programs.  With the exception of some USB devices, it does not provide a direct access to the hardware on the host computer.

  If you need to use your real graphics hardware in XP you will probably have to put in place a system to dual-boot and boot XP when necessary.

• Windows did not detect my graphics card

  Hello world

  In the Device Manager, my graphics card than ATI Radeon HD 7450 appears as "Standard VGA adapter". I tried to install the latest driver from the website of AMD, but automatic installation (use the provided installation program) and the manual installation (Manager of devices-> update driver software-> Browse my computer for driver software) do not work. For manual installation, it keep says that "the driver does not support this version of windows" regardless of the version of the driver that I use
  (My Windows is Windows 7 x 64). That's happened?

  The drivers for this card are here (although you must first select the bit win version)

  http://support.AMD.com/us/gpudownload/Windows/pages/radeonaiw_vista32.aspx

  If the card is not detected, turn off the power, open the case and reinsert the card or try another pci slot, then re test

• Not detected by Windows 8 ATI Mobility Radeon X 600 graphics card

  Just upgraded my laptop (TOSHIBA TECRA A4) of Windows 8 and the card ATI Mobility Radeon X 600 is not detected by the system. Instead, there is a Microsoft standard base with poor results display adapter. Does anyone know how to fix this? I tried to uninstall this card, but it gets automatically reinstalled. I also tired Windows Update but without any result.

  I am attaching some info system below

  Hardware information
   
  Name AMD Radeon Graphics Processor
  Reference of the manufacturer Advanced Micro Devices, Inc.
  Device ID 0 x 5462
  Vendor ID 0 x 1002
  Code of the class 0 x 030000
  Revision ID 0x00
  ID subsystem 0xff10
  Subsystem vendor ID 0 x 1179

  Thank you

  I managed to find a solution and it could be applicable to other users.

  Step 1: Go to http://catalog.update.microsoft.com/v7/site/home.aspx and search of your graphics card.

  Step 2: once you find the list, select the suitable driver for windows 7 (WDDM) that are compatible with windows 8.

  Step 3: download. Run it and extract it in a specific folder.

  Step 4: Go to control panel, then system, then Device Manager, then the graphics card, then right click to update device software.

  Step 5: Select Browse my computer for driver software. In the next window, select the folder where you extracted the driver. That will solve the problem.

  For my portable 32-bit with ATI Mobility Radeon X 600, I chose the "ATI Technologies Inc. driver update for MOBILITY RADEON X 600 SE (Microsoft Corporation - WDDM).

• Computer can not detect any sound cards and graphics or communication ports.

  Recently I reinstalled Windows using the CD, I had Dell, when I bought my computer. However, when I was done with the installation, I went on youtube to look at things and I realized that the sound was not working. I thought I must have forgotten to install the driver for my sound card, then when I tried to install, it says something in the sense of "error". - Impossible to find Port Com1 I looked into this a bit on google and found that it is probably disabled in my BiOS. I'm not sure what to do after that, but I hope that someone knows why my computer can not detect anything.  hate viruses

  http://support.Dell.com/support/downloads/index.aspx

  Go to Dell website > drivers and downloads Section > key in your model number > get latest XP drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Alienware M15x does not detect the graphics card, GeForce GT 555 M

  Hey guys, I ask you bear with me for the whole story because I believe that it may be relevant.

  I just bought this laptop (M15x) pre owned, it came with windows installed 8.1 and a load of games and others with all the drivers work and tact. Although it has been slow and some errors like may be able to control the volume.

  CPUID other programs showed my 1024 MB graphics card but I don't remember the name but I'll what nvidia says on their site and the description says...

  I didn't like windows 8 and I thought, rather than make clean for a week I'll install windows 7 from scratch, I did. Windows 7 ultimate 64-bit for info

  After doing this, I started to install anti virus and others and then to install the drivers, many of which I don't know, but analysis system dell raised all of the recommendations I installed, everything outside the video... none seems to fit my current card. I left it... went to nvidia which part of the site told me that he could not find compatible hardware... another part of the site classified as GT 555 M, but I had to go to my manufacturer to get the driver.

  After a few discussions with local technicians and these and other forums, I tried the drivers provided dell card among other NVIDIA covering my amog others but none worked and could not find compatible hardware...

  I thought it was that I installed the drivers in the wrong order, after an accident, I installed windows 7 over again and went straight on the chipset driver, then the video driver. but I fell on the same subject.

  After looking over several forums, the only thing I can come up with is to turn off graphics integrated into the bios (option not available for this)

  Maybe windows 7 doesn't like this graphics card? I am at a loss. given that everything worked fine on windows 8.1

  also in the device manager it does not list my card on the pc there is nothing wouldn't prove that I have a graphics card to all even the windows own evaluation system set to 1 for graphics NOTE from the ADMIN: replace character removed according to the TOU >

  Please help me...

  The GT 555 M has been never delivered with the M15X, but with M14X R1, so the former owner must have updated the GT 240 M graphics card. This explains why the drivers from the website corresponds to your configuration.

  Try this version of the driver from the NVIDIA website and let me know how it goes.

• Dynadock U3.0 has not detected 2nd screen to help to win 8

  I don't want to return this product, but if I can't solve this problem I don't have many choices.

  I have Windows 8 Preview of consumer and Dynadock U3.0

  The mouse and keyboard work fine. The second screen was working fine for a few days, but suddenly stopped working after having to reboot my system.

  I have install the driver of Windows 8 Beta. I tried to uninstall and reinstall it, but this does not resolve the issue. My computer does not recognize the USB cable is connected to the computer is the dynadock. The Dynadock screen icon does not appear automatically.

  In view > resolution of the screen, my computer does not detect that a second screen is plugged.

  If I plug the screen directly into my computer, it works fine.

  When I try to install the driver while he is already installed, a message appears saying 'DisplayLink DisplayLink Graphics Software is already up-to-date.

  I tried to restart and re - plug in the USB. Nothing has worked yet.

  > I have Windows 8 Preview of consumer and Dynadock U3.0

  I think the problem is you are using Win 8
  I imagine that there are some compatibility issues as Win 8 is not official on the market

  You have the same problem with Win 7?

• Satellite A300 - S-video does not detect TV

  Dear all
  Last week, I bought your new product: Toshiba Satellite A300

  I liked its release specifications specially s-video.
  When I arrived at my house, I have it plugged into my TV:
  Bomba Toshiba 29A3MJ
  http://www.Toshiba-Gulf.com/site/product/prd_details.asp?prdid=1044&CATID=123

  I used S-Video/RCA cable:
  http://www.accessories-shop.NET/images/5FT_4_PIN_S-VIDEO_to_3_RCA_TV_male_Cable.jpg

  Then, I put the TV fashion which I usually use to another laptop.
  I kept clicking on Fn + F5 on the satellite phone without exploitation.
  Nothing has been posted on the TV screem.
  Before, I used to connect to HP Pavilion dv2000 in the same TV using the s-video and it worked fine.

  Please advice how to solve this problem.
  Best regards

  Hello

  Usually, this should work.
  Both devices must be OFF. Connect then the laptop and the TV using this cable.
  Turn on the TV and the laptop starts.

  If the use of the FN + F5 will not detect the image on the TV then I would recommend checking the settings in your graphics card properties.

  I put t know what graphics card you have, but my Satellite phone has been equipped with the Intel graphics card and I can change the settings in Control Panel-> Intel GMA graphics card.

  Maybe your laptop supports the ATI card. If these parameters were in ATI catalyst.

  PS: Check if you are using the latest version of the BIOS and the latest graphics card driver too.