P1102w stuck initializing after power off the printer

Similar Questions

• HP Officejet 4630: HP 4630 gets printer fault. Must cancel doc, power off the printer, then restart. There is WI - FI connected

  HP 4630 gets printer fault. Must cancel doc, power off the printer, then restart. There is WI - FI connected.

  It then prints until I have change entry. Then it occurs and stop and restart is necessary.

  FAX and SCAN properly.

  Hello

  Thank you for using the HP Forums. You can try the following:

  Please download and run the HP Print and Scan Doctor (PSDR) tool to diagnose and solve your problem

  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926&h_lang=en&h_client=s-h-E016-1&h_keyword=DG-PDU

  Hope that helps.

• Linksys SGE2010P resets after power off the power

  Hello

  I have a linksys SGE2010P and when I configure and save works well, but after a power off the settings are default return. someone an idea?

  Rensk,

  I used to have the same problem in my SFE2000 until I learned that you do the following steps to permanently save your settings

  go to Admin > file management > copy files

  Click the copy settings button

  set the name of the Source as Config file running

  Set the name of Destination as Config Startup file

  Click on apply

• Unable to save the configuration of PC5424 after power off the power

  Hello

  I am to set up the switch of PC5424, I set the admin/password and IP through the wizard of initiation. Access this switch using the IP through IE and I configured two VLANS in the pages web of DELL OpenManage Switch Administator and then I applied the changes.

  I activated the switch and run it after several minutes. But I found that the VLANS configured dissappeared! How can I save my changes permanently?

  Thank you

  
  

• Spoolsv.exe has 99% of the cpu when I turned off the printer after printing.

  Original title: spoolsv.

  I recently installed a new printer Lexmark Pro715.  Everything works fine, no problems with printing, but as soon as I put off the printer after printing, spoolsv.exe takes 99% CPU.  If I leave the printer in mode 'sleep', the problem is, but I do not often print, I prefer to turn off completely.  There is nothing in the print queue, everything else seems normal.  I can use the Task Manager to stop it, but this isn't a good solution in the long term.  I run MS Update and uninstalled and reinstalled the printer, with no effect.  It's driving me crazy.  I have Windows XP Home Edition SP3.

  From what I've read on the Internet about the print spooler using 99 to 100%, Norton is also sometimes involved as a contributing factor to a runaway print spooler for some people (where my request).

  IIRC, people would set their Norton to start a scan and when it was made, the print spooler has run amok at 100%:

  "Because I have Norton Antivirus, do a system scan every Friday night that I happened to see that the value SPOOLSV. EXE is using almost 100% of the CPU of the morning Saturday. It's the only time that it happens, so I simply stop the process in the SERVICES window, and life is good. I don't know why Norton Antivirus it triggers during the scanning process that I couldn't find anything on the Symantec relating to this site. »

  If the problem resurfaces surface, using abduction special tools on their website, you can uninstall your Norton and view the appearance of things without him - you can always reinstall again once, right?

  I disagree with Norton in general for its CPU and memory hogging and known interference with other XP processes (such as the restoration of the system), so I'd keep which in mind if the problem returns.

  A few years ago, I used to like Norton correct, but will never go back or recommend it.  Microsoft Security Essentials with it's lower overhead and footprint and some regular on the analyses at the request of the MBAM and SAS should hold your own system based on your surfing habits.  Your system will reward you with an improvement in the overall performance of the system as well.

  I can tell you that no single AV tool seems to know everyting so it is safe to use several respectable scanning tools.  Norton certainly doesn't know everything.

• U2415, artifacts monitor after power off for a period of time. Solved by allowing the DP1.2

  U2415 - artifacts monitor after power off for a period of time

  I'm running Win 8 Pro 64 bit, Asus GTX 760. Connected to the U2415 using the miniDP to DP cable.

  It is: after turning off my monitor for a period of time (PC fixed IT), 2 hours or more, after turning it back on, I see lines on the screen.

  I will need to restart the PC for it to be back to normal.

  It will not happen if I turned OFF the monitor for a short period. Only when I turned OFF for a few hours.

  Any ideas? Thank you.

  I downloaded a video on Dropbox. I had it turned on after turning off for about 3 hours.

  [See:www.dropbox.com/.../U2415.mp4]

  Hi Chris, just an update.

  A local forumer had discovered how to solve.

  It was the scene of DP1.2. By default, it is set to "Disable". After that I put to 'Activate' and test it for 2 days, everything seems fine now.

  Hopefully someone will find this useful.

  Thanks Chris.

• USB ports suddenly freeze and stops working for 10 sec after power off or powered speakers

  Original title: Usb Ports stop working for 10secs after power off or powered speakers!

  Hello

  I have no why, but my usb ports suddenly hangs for 10secs when my speakers turned on or off the power in case of operation of pc... And I have a usb mouse usb wireless keyboard and... with this problem that I can not work properly... and some times my mouse work in early upward and then I should use my keyboard to restart the pc... Then it works very well! Help me please. !

  Hi Thierry,.

  This issue does not appear with Windows that even after you perform a clean installation. So for me, it looks like a material damage. I would recommenmd get you in touch with the manufacturer of your computer and to do the repair.

  Do not hesitate to contact if you have problems with Windows in the future.

• All lights on screen Flash - Message - Please turn off the printer and turn it back on

  I'm fighting a problem for a few weeks now with all the lights on the display starts flashing and the message please turn off the printer and turn it back on.   HP sent me a new printer that does the same thing.  The printer is an Officejet Pro 8600.  My computer is Windows 7.  I use a Belkin 750 db wireless router.  I talked to the service the customer several times with no results.  Did a hard reset of the printer, change the SSID of the router, because I think that one of my neighbors has the same router.  The thing most effective I did was change the channel to 6 which will operate for several hours until the display starts to Flash again.  Channels 1 & 11 starts blinking after a few minutes.  I know there are other people who have had the same problem.  I'm about to throw the thing in the trash.  My last printer brand X was set up the same way with no problems.  On the network, there are 2 iPads, smart TV, and an iPhone.  Need help please!

  Super Dave

  Ethernet cable and connection with correction of the problem.  Its been 2 days and the printer worked perfectly.  Please pass this solution on your technical telephone support staff because I know that there are others with the same question.  Thanks for your help.

• Brother MFC-7420. Usually, it works on Windows 7, it will not print and I have to unload the coil and switch off the printer before Relighting.

  I use a Brother MFC-7420. Usually, it works under Windows 7, but from time to time (maybe 1 in 20 times) he will not print and I have to unload the coil and switch off the printer before Relighting. It is not always the case, but it is enough times to be a nuisance.

  Ideas, people?

  Hello

  This problem occurs when you make changes to the computer?

  Method 1: Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/

  Method 2: Refer to this link: I can not print from my computer via the USB port.

   
  http://welcome.solutions.brother.com/BSC/public/us/us/en/FAQ/FAQ/000000/002700/000006/faq002706_000.html?reg=us&lang=en&c=us&prod=mfc7420_all&page=FaqEndPage
   

  If you have problems, I haveinstall updated printer drivers, see this link:
  http://www.brother-USA.com/downloads/default.aspx?PgId=5&R3ModelID=MFC7420

  Refer to this: update the drivers for hardware that does not work properly.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  See also: printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  I hope this helps!

• Cannot convert a virtual machine while it is powere on or suspended. Shut down and power off the virtual machine before the conversion.

  Hi all

  I am currently using preinstalled VMware 7.1 and I try to import a virtual machine, I used to work on my windows XP. Recently, I am using windows VISTA and I am trying to import my VM (.vmx) and I get this error "cannot convert a virtual machine, although it is powere on or suspended. "Shut down and power off the virtual machine before the conversion.

  This virtual machine worked very well under windows XP and VMware 6.5, but now I am not able to import it. Please suggest how I can make this virtual machine running in my VISTA and vmware 7.1.

  I am also attaching the converter file logs and .vmx vmware.

  Thank you...

  Is there a problem with this backup?

  It is possible. How big is she?

  Right-click on the vmdk file in Solution Explorer, then select «Map virtual disk...» "Does it work?

  André

• HELP PLEASE! I can't power off the virtual machine on host VWware ESXi

  I can not power off the virtual machine on host VWware ESXi is any other command. How can I restart?

  I need to power on the virtual machine, I did not back up!

  Thank you very much

  Hello

  in the ESXi console, run esxtop... you see the functioning of the virtual machine?

  If this isn't the case, you can restart management agents in the ESXi and you will be able to turn on the virtual machine again.

• How to restore printing on HP 1300 after trying with the printer off?

  A print request is sent directly to a printer HP LaserJet 1300 connected - through the cable to the parallel port, port DOT4_001-to my PC - Windows XP SP3 - when the printer is not powered. The print request fails. The printer power is on then. This print request and all following print request fail. Turning on the printer down then upward does not change the State. The cancellation of all requests for printing and reissue of a request still does not work. The only way I found to solve that this is, with the printer power on, power off then turn on the PC. Then, all exceptional printing applications has not been cancelled are respected, as well as all new.

  Is it possible to unlock the print requests requiring no power down/up the PC?

  Thank you.

  This has been resolved. See the discussion in the Council Commercial LaserJet.

• HP photosmart d110a printer load paper message demo lights after power to the top

  After changing the black cartridge, when I turn on the printer, it always comes up with the message "loading paper".  There are in the paper machine.  I removed, repositioned, tried different papers, etc.  I have the choice to see the demo or "OK to continue".  Whatever it is, it then puts to the top of the screen, which suggests that I run the alignment process.  It is the only choice.  When I press OK, it now says 'print alignment page' and displays the blue bar pulse, the Red 'X' and the power button flashes, but it remains that way forever.   Oddly enough, I can still print, even when paused trying to print the alignment page.

  Hey there. Try following the steps described in this paper: a "undetected alignment page" or "Cannot be alignment" Message displays on the all-in-one

  Even if the title is not correct for your mistake, it goes through the same troubleshooting steps. Let me know if this is not the problem. If she does not show returns with a new details and we will continue from there.

  Good luck

  Sean

• 17 e040us seeing supply and turned on WIFI light after switching off the power

  17 - e040us after HPO updates and Windows Update now when I turned off the computer, power and wifi lights stay on... have to hold the power button in get them to turn off before I turn on the back

  tried the power settings and looked in the BIOS, there is nothing that I see... any ideas?

  Solved returned to the F8 BIOS and the problem disappeared... .has been F14, the origin of the problem

• With Windows Vista, HP printer repeatedly re - moved after turning off the PC, then return and losing sessions.

  I have Windows Vista, Dell Vostro A860, HP PSC 1410 all-in-one printer.  The HP CD work well with Vista.  The printer repeatedly re - installs itself, making it necessary to go into the settings to choose my preferences each time. I did download a fix from HP that has first requires that you uninstall the original software, and then download and apply the fix.  However, the patch will not install unless you have a software for its difficulty.  It is a cycle race.   Any ideas?

  Jeanette

  Hello

  1. don't you make changes on the computer before the show?
  2 did you receive an error message?

  Method 1:
  You can unplug the printer and reconnect the printer and check the issue. You can also uninstall completely printing software and then try to restart the computer and check.
  See the link for help.
  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  Method 2:
  After restarting the computer, you can download and install the drivers and check.
  You can check the link to download the drivers.
  Software downloads & pilot - printers all in one HP PSC 1410v
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&lang=en&LC=en&product=458978
  Also check out the link:
  Find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers

  Method 3:
  After the installation of the printer, you can try to print a test page and check.
  Print a test page
  http://Windows.Microsoft.com/en-us/Windows-Vista/print-a-test-page