HP LaserJet Ent.MFP M725f: Stuck 'Initializing 30' on HP LaserJet Ent.MFP M725f

Similar Questions

• HP 2600n stuck initializing

  Hello!

  I recently cleaned the 2600n HP transmissions box lenses. When I put back it together, the printer worked and then had a paper jam. I opened the door of the printer to see origin of the paper jam and saw that it was at the top. I pulled the paper down and closed the door of the printer. On the screen, he showed "door open". I then opened the door and closed, but showed the same error.

  I turned off the printer and turned it back. The screen is stuck on "Initailizing.." I left it for an hour and saw no change on the screen.

  I then tried a hard reset and power drain but it did not work. I also plugged into the wall but no luck there. I also tried to see if an updated firmware is necessary, but I think that the printer has the latest firmware. Nothing changed when I connected the printer to my computer.

  I think that the warranty has expired also.

  Please let me know if there is a way to fix the printer. Thank you!

  As strange as it may seem, I remove the hood back and reinstall all connections going to the dc controller.  It is the Board of Directors on the low right side when looking from the back.

• P1102w stuck initializing after power off the printer

  Product: HP p1102w CE657A printer

  OS: Win - 7 64-bit SP1

  Error: printer not end initialization - time attention and ready lights flash simultaneously and continuously.

  I recently rearranged some furniture in my office and had to unplug all of my electronics in the process. After having everything plugged back to turn on the printer, it is stuck at initialization and will do nothing else.

  I tried the following, not necessarily in the order listed since I was in this for the better part of the afternoon:

  -Taking the wireless and Cancel buttons reset factory default has no effect.

  -I can't access it through the IP address, she had when I turned it off via a USB connection or wireless.

  -I can't print a configuration page to see if it has the same IP address.

  -Whisky.

  -J' uninstalled the drivers for my computer to reinstall the printer.

  -All attempts to reinstall the printer do not have the printer does not communicate with my computer via a USB connection, regardless of the method of installation (SmartInstall starts; installation CD or downloaded that both drivers get to a point where they want to make sure the printer is turned on and connected via a USB cable, and that's what I go with it.)

  -Blasphemy.

  -L' utility Dr. HP Scan can't find the printer and thus do not address it. He was unable to find the printer until the drivers have been uninstalled.

  -Try the steps above using two other computers in the House was just as frustrating and unproductive.

  The printer has not been abandoned, kicked or abused in anyway during the movement of furniture so it may not be the question.

  Similar problems were held with this printer during the summer when I bought my new computer and the printer was disconnected while I was moving some cords. The problem seemed to correct itself spontaneously and I have no idea how I work and what I've done differently.

  Any help would be appreciated.

  See you soon,.

  Boozerbear60

  Usually in this case, the printer does not have a sufficient amount of power. Make sure that the printer is connected directly to a wall outlet. If you are connecting to a lightning arrester, power strip, or rescued food, she is unable to get enough power to complete the initialization cycle. If it does not, follow the steps outlined in the document below the link to try to get the printer to answer. As a last effort before contacting HP on a replacement printer, do a hard reset. I'll post the instructions below. Let me know what happens.

  The printer will not turn on or respond

  To do a hard reset:
  1. make sure that the printer is turned on.
  2. pull on the power cord from the printer.
  3. pull out the power cord from the wall.
  4. wait for 30 seconds.
  5. plug in the printer and turn it on.

• Why Photoshop CC (2015) stuck initializing?

  I am on Windows 10 and can't Photoshop to open. I uninstalled, run CC cleaner, reinstalled and still the same problem. And I'm on a deadline. Ugh.

  Thanks for the update

  * Don't consider my last answer, we now open Photoshop

  If you still get C++ errors when launching Photoshop.

  Close Photoshop

  Fix all the Microsoft C++ Re-Distributable entered the program in Control Panel > program and features

  

  Go to Download Visual C++ Redistributable for Visual Studio 2012 updated 4 of the official Microsoft Download Center

  Re-download the 2012

  You will get not the C == error in Photoshop

  Thank you for your Patience

  Good luck!

  ~ Assani

• HP m225dw: my HP Laserjet Pro M225dw MFP is stuck on logo HP "initialization".

  Help!  I did everything suggested in previous posts, but my printer is still initializing mode.  Too bad I saw work scanner, but I was stuck initializing mode to try to solve all these problems.  Help, please.

  Hey @missmgm,

  Welcome to the Forums of HP Support!

  I see that you have some problems with your M225dw Laserjet stuck initializing. I can help you with that, but I'll need to know what troubleshooting steps you have tried first. Once I know that I will be better able to help you.

• get stuck when you try to run an installer built in!

  Hello, all!  I'm new to the forum.  I worked on and off LabVIEW Development.  One of my projects, it must be that I am building a VI to download information from a PLC.  The information is laid out in an excel file, where a macro is ran by program to convert the news for a more user-friendly look and playback.

  This is my first, an installer of construction so I thought to test.  When I packed the VI into an executable and a Setup program, it was all smooth sailing.  However, when I tested the installation program on several computers (with no LV or LV - RTE), few took 5 to 10 minutes to complete the installation.  Others are stuck initially in the installation process... generally when the process is to install 'Microsoft Run Time Engine.  On a computer, the installation process was canceled and restarted several times without success.  Then, the next morning (after a reboot), the installation worked without problem.  On another computer, I did the whole 'install-cancel-restart install' process.  After three times I checked the Manager task and noticed it was also a lot of files msiexec.exe continues even after that facility had been cancelled and the interface of the closed facility.  I ended up all msiexec.exe, ran again the installation process, and it went smoothly from 0 to 100%.

  Although it's great that I had the installer through smoothly after completing the msiexec process, it cannot do as the solution to an installation complete.

  Has anyone ever run into this issue?  Computers, on which I have tested are all connected to the company network, but the files are installed in C:\Program Files.  I'll test the installation on personal laptops and computers to see if it is some kind of security problem Admin/Norton/as our IT has implemented.

  Hi all

  Thanks to those who responded to try and help me.  After a few weeks of investigation, I came to the following conclusion: the LV Installer built is suspended due to the msiexec Windows XP.  I found a few online solutions, one of them involving "restoration" the MSI installer (I don't remember the other...).  Due to the nature of the software that I build, users enter in their records is not a viable option.  Instead, the following roundabout will have to:

  1 Win - XP user installs the software.

  2. If installation of Win - XP user is suspended (see the attached picture where I hung on a PC Win - XP), they will have to open the Task Manager and "complete the process -" all processes msiexec.exe... after a few seconds, the installation prompts the user that a certain file failed to install and ask if they want to continue.  The user will click on continue and repeat if Setup hangs again.  This should be done until the installation is complete (that I had to do this three times repeatedly).  At the end (if I remember correctly), the installation prompts the user that the process has failed.

  At this point, the installation closes. BUT all the necessary files seem to be there.  The software seems to work ok with several test is running - no problem.

  As I am short on time and have to run out of the office... I just remembered that the alternative is to try to install on the administrator account.  Probably, the reason why the installer crashes is because the given user account has permissions to read/write appropriate in C:\Program Files.

  Any thoughts are appreciated.  Thanks LV community - have a good weekend!

• Help please - Windows update - restart issues (and upgrade to Windows 10 questions?)

  Hello

  I wanted to switch to Windows 10 but got stuck on the "start download" page, as have other users.

  Looking through the other questions on this site, I have seen that Windows update may need to complete before you start with Windows 10.

  I had not run windows update for a long time I thought that would mean Windows 10 would install and I wasn't ready for this, but now I am.

  Then I ran windows update and more than 150 updates have been installed.

  However, he now says:

  "Restart your computer to install important updates

  Windows cannot update services and important files while the system uses them.  Save... "

  I rebooted, shut down, rebooted several times, but this message continues to appear in the Windows Update window.

  Still, the update of Windows 10 stuck initially download.

  I ran disk cleanup in safe mode, as well as normal and tried to restart, but it did not help.  I tried the troubleshooting windows update option, but this did not help.

  I used two tools, the Microsoft FixIt who did not help and a WindowsUpdateDiagnostic.diagcab file which allows to find the two errors and saying: he fixed them, but this still does not work, IE always ask me to restart and Windows 10 gets stuck to download from.

  The two problems it finds are listed as:

  "Windows Update error 0 x 80070005(2016-05-30-T-08_49_44P)" and is listed as fixed

  "Problems install the latest updates" and is considered to be fixed.

  I am at my wits end and would be really grateful for the help.

  If this becomes technical, please help me in using a step by step method or referring to one for me.

  I have a laptop of Toshiba Windows 7 64-bit.

  Thanks in advance

  EDIT: I ran the above diagnostic tool and the error was fixed progresses over time, that is to say it is correct to say 09:03 now...  Also, to revise accordingly the so-called updates installed, many of them, but not all, have the status of a failed.

  What to do about all this?

  I suggest you to download the tool for creating Windows Media 10 ISO and make a place in upgrade.

  Download the update of Windows Media Player 10 tool creation build 10586:

  http://www.Microsoft.com/en-us/software-download/Windows10

  How to download an ISO using media tool:

  http://www.tenforums.com/tutorials/9230-Windows-10-ISO-download.html

  How to make a upgrade in Place using method 1:

  http://www.tenforums.com/tutorials/16397-repair-install-Windows-10-place-upgrade.html#step6

  If this does not work please restart your computer and wait 20 minutes for the system to operate before you download the information needed to help me investigate your problem. When the review much, not Event Viewer log files all problems show in the period immediately after the computer has booted.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. If the report is in one language other than English, please indicate the language.

  Please download and share with everyone a new copy of your log System of your event viewer on your disc one and post a link here. It allows to avoid confusion if you delete all previous copies of the log files of your OneDrive.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:

  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

• Color Laserjet MFP M176n Pro: Color Laserjet Pro MFP M176n stuck on initializing, Toner carousel will not go

  Hello

  Our Color Laserjet Pro M176n MFP is stuck at initializing, since the last time that the yellow toner cartridge has been replaced. After the replacement of the cartridge, the toner carousel turned, started making rattling noises and then stopped. She does after every start. It seems that there is something blocking the movement of the carousel, since I can't move it even manually as described in of many other forum posts on similar problems. Is there a way to access the back of the carousel to see if there is something blocking it from moving?

  Thanks for letting me know @samuelm.

  I don't see any other way to access the tonics. The printer will need to be repaired. Thank you!

• LaserJet Pro M127fn MFP: Stuck "print fax page 1.

  I had to receive two pages of fax. After that the first page has come through it is stuck "print fax page 1. The second page is never good. I can't print anything. I already disconnected my printer and plugged in. When the rear connection, it uses the same throughout first fax page and gets stuck again. Happen from nowhere at least once a week for the past few weeks.

  Hi @cvsc ,

  I see that you are having problems with the printer stuck in an "Print fax page 1" error message when you restart the printer, it keeps printing the same fax. I would really like to be able to help solve this problem.

  I would like to do a hard reset to see if that will solve the problem. It's probably a little different then what you have already tried.

  Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
  This ensures that the printer is full on and can help this situation.

  I would say for updating the firmware of the printer. Here is the link just choose your operating system and select the firmware download. HP LaserJet Pro MFP M127/M128 series Firmware update.

  If you're still having problems, try to reset the printer. I'll send you another step to try in a private message to try.
  In the forum next to your handle name simply click on the envelope to see.

  If you need help, let me know.

  Good day!
  Thank you.

• M177fw MFP: MFP M177fw stuck at initializing

  «Hi there, then put in place the printer by the book / manual.» I am able to scan documents using the HP software, but I can't print anything. The touchscreen is stcuk to "initialize". The M177fw and the laptop are connected in WiFi.

  When I click on the 'status' button of supplies, the text on the touch screen becomes to XYZ color, but this task is never ending. Any number of reboots always shows "initializing". Please let me how can know I do this printer print documents.

  Thank you

  T HP

  Hi @T-HP.

  Thank you for joining the HP Forums!

  I noticed your post on how your HP Laserjet M177fw printer is stuck on initializing. And I'm happy to help you!

  Please first try a hard reset by following the steps in this post, How to perform a hard reset, by @Rich1. It is important that the power cable from the printer is plugged directly into the wall outlet, not a surge protector.

  If the hard reset does not solve the problem, I also have you sent for a factory reset instructions in a private message. If you are unfamiliar with the operation of the function of private messages of the Forum, this post has instructions.

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  We'll see what happens!

• LaserJet Pro M127fn MFP: Stuck on "Print Fax Front Page.

  This MFP is stuck with the message, 'Printing Fax Page One' I've tried the reset instructions are on the forums, but cannot get rid of this message. Is there a reset 'hard' or 'factory' I can do? Thank you

  Hi again,

  I would say for updating the firmware of the printer.

  Here is the link just choose your operating system and select the firmware download.

  HP LaserJet Pro M127 MFP series Firmware update

  Make sure that you scroll to the Firmware section.

  See if that helps

• Pro M177fw MFP stuck on initializing

  Brand new, right out of the box. Here's what I saw: the initialization is not complete, but I can tap on the Home icon. Noticed a symbol above the button of toner. Please I need your help fast. Thank you

  Hi @SangPham,

  Welcome to the Forums of HP Support!

  I understand that you are having problems getting your new HP Color LaserJet M177fw MFP Printer Pro installation. I would be glad to help and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I see that has not finished initializing and toner light is to inform you of a problem. It seems that some packing material has not been removed. Please take a second look.

  Use this guide to get instructions on how to properly load the toner cartridge in the printer: setting printer to printers HP Color LaserJet Pro M177fw multifunctional material upward.

  If the problem persists, please contact HP or put the printer in the point of sale.

  Contact HP for service in all countries except Asia-Pacific.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number are displayed.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• My MFP HP Laserjet Pro M225dw stuck on HP «Initializ ing» logo

  I have a HP Laserjet the MFP Pro M225dw, less than a year. After having turned off for two months, he's stuck on the screen "Initializ ing" the HP logo.

  Can somone advise how to start?

  Greetings @LeeSRQ,

  Thank you access the Forums from HP Support for extra support! I see that the printer is locked during initialization after you have not used for two months. I will do my best to help you with this problem.

  Try a hard reset to see if that will solve the problem.
  Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
  This ensures that the printer is full on and can help this situation.

  I suggest to try and update the firmware of the printer. It always needs to be updated even if the printer is in an error state: HP LaserJet Pro Series Firmware Update Utility. Just select your operating system.

  I'll send you the reset of the printer try in a private message.
  In the forum next to your handle name simply click on the envelope to see.

  If this helps you to find a solution, please click on the button "accept as a Solution. If you wish, to say thank you for my effort to help, click on the 'Thumbs Up' to give me a Kudos.
  Please let me know the results. Good day!

• MFP M225dw: Printer stuck on 'initializing '.

  I bought the printer in February 2015 (less than 6 months ago) and on my network without wire (connected via surge protector which was brand new).  Everything was excellent until a week ago.  Aware of the printer went away, and when he came, he remained on the screen during initialization.  I let go 48 hours without change.  I have unplugged for an hour and replugged it in, no change.  I unplugged for 3 days and tried again, no luck.

  I came on the forums and tried the steps recommended in another post:

  Tried a hard reset (disconnect while remaining on and wait 60 seconds, reconnect to a wall outlet)-nope

  Tempted to drain power (unplug everything in now the power button / Stop button for 30 seconds)-nope

  Tried to update the software from HP Support Assistant on my computer, all updates current and no change

  I even went as far as uninstalling the printer and the software from my computer and attempt to connect via a USB connection - the solution was problematic, because the printer never have to ready mode to install the software.

  Attempted to intall for wireless network, but I get to the menu on the printer because of its being stuck on initializing wireless.

  Need help please, I'm more frustrated by the day and can't go much longer without the printer.  I invested more money to ensure that I had a reliable quality printer.  Cheaper printers does not fizz out on me this quickly!

  Hi @KJUser,

  I see by your post that the printer is locked during initialization. I want to help you.

  I'll send you another step to try in a private message.
  In the forum next to your handle name simply click on the envelope to see.

  If the problem persists, please Contact the HP Support for help. Check the model number and the form to receive a file number for faster assistance.

  If you appreciate my efforts, please click on the "Thumbs up" button below. Thank you.

• 100 M175nw MFP Color LaserJet: Try to install the HP software, msg stuck like "Check 'HP LaserJet SW OSX Mavericks'..." »

  I am trying to install the complete package HP for my page printer (http://support.hp.com/us-en/drivers/selfservice/hp-laserjet-pro-100-color-mfp-m175/4208157/model/420...).  Successfully, I downloaded the software and double-clicked.  The installation program launches and said verification ' HP LaserJet SW OSX Mavericks '... and he's here.  The progress bar is not updated; It is just there for ever.

  I have the printer physically connected via the USB port.  I would like to configure to work via WiFi, and I want to be able to use the features of the scanner, as I have in the past through Windows.

  Hi @Loroki,

  Thank you for joining the HP Forums!

  I appreciate that you try to install your printer HP LaserJet 100 Color MFP M175nw on Mac OS X 10.11 El Capitan. And I'm happy to help you!

  To confirm that the hardware of the printer is functional, you are able to print a configuration report? Print a Configuration report.

  In the meantime, please, try the procedure described in this guide, printer not found during Network Driver Setup (OS X)and let me know the results!

  If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Hope this guide helps!