HP 3050 has J611b (all-in-one)

Is the foregoing allows scanning with the ADF?

If so, how to enable it? I use a Mac OS X 10.6.8

Hello

This may be possible from the software, but I'm not to known mac software (im a boy of windows), but as far as I can see you need to parse from the software, when asked to choose to scan another page and when, select Save. It will ask you what type of file and when you select a file type that supports multiple pages as PDF them should be available to select a checkbox "save all items in a single file.

Tags: HP Printers

Similar Questions

  • DeskJet 3050 has J611 all-in-one: Mac cannot connect to the printer using the wireless configuration

    My printer is connected to the same network as my Mac. When you complete the Setup wireless using a USB in system (HP Utility) preferences, a message says: "wireless network settings have been successfully downloaded to your device. However your Mac could not locate the device on the network. »

    I did everything I could: restart the printer. Unplug the printer and reconnected on the network and configuration of try again several times.

    Help?

    Hey @benjaminllim,

    Welcome to the Forums of HP Support!

    I understand that you have some problems with the connection of your Deskjet 3050 has e-all-in-one printer to your computer Mac OSX 10.11. I can help you with that.

    To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

    1. Turn the printer off:
    2. While the printer is turned off, disconnect the power cable from the back of the router for a minute.
    3. When the lights come back on the router, turn on the printer.
    4. Disable any antivirus, firewall or security of your Mac software.
    5. Try to run the installer.

    Please let me know the results after following the above. If you are able to print to the printer, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  • Destjet HP 3050 has j611 all-in-one series does not not on windows 8

    I got Hp Deskjet 3050 a j611 all-in-one series on my windows 7, I've upgraded to Windows 8 and my printer did not work properly so I uninstalled so I could reinstall it, but it will not install because it says that it is not compatible. is it possible that I can make this printer work using Windows 8?

    Hey kelyka1,

    I guess you are trying to reinstall with the CD supplied with the printer.  Click on the link below to access the download page for the driver for Windows 8 for the Deskjet 3050 a J611.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-109013-2&cc=us&DLC=en&LC=en&OS=4132&product=5061082&sw_lang=

    I hope this helps.

  • HP Deskjet 3050 has e-all-in-one: impossible to download drivers and software Web site

    I have seen this problem posted a few more times, it seems that it is recurring.

    I reinstalled Win7 on my machine.  I try to reinstall the driver and software for my all in one.  I get ' HP is compile your results. " It could take up to 3 minutes, depending on the speed of your computer and connection. Thank you for your patience. ' message for more than 10 minutes now with only the busy indicator.  I tried this on Chrome and IE with the same results.  Help.  I need my scanner.

    The pilot site is always questions, but you can download the driver Windows 7 x 64 for the HP Deskjet 3050 a directly from the link here:

    http://ftp.HP.com/pub/softlib/software12/COL37193/al-109013-3/DJ3050A_J611_1315-1.exe

  • HP 3050 j610 printer all in one

    I have a hp 3050 j610 printer all in one, the scanner scans without problem, but it will not be printed. I have this printer set in place on a wireless connection, can someone help me with this problem.

    What operating system do you use?

    HP has designed a quick and easy tool that diagnoses and solves many problems of printing, scanning and connectivity: The HP Print and Scan doctor. HP recommend you to download and install Print and scan doctor no matter what time you need to solve a problem with your HP printer from the link below.

    I would like to know what are the errors you receive?

    http://goo.GL/3DAkq

  • Printer HP 3050 J610 series all in one will not print any documents

    I'm on Windows 7 Service pack 1 and I have a HP Deskjet 3050 J610 Series All - In - One Printer.it is not wireless I use a USB port for printing.   I have problems printing pdf files as well as Word documents.  I uninstalled and reinstalled the software and drivers; I have restarted my computer several times; I tried the scan doctor and he says everything is fine.  It prints the test pages.  When I press the icon of the printer, it will save the file even if the file is saved to alread. I'm going to planet and save the file again.  I noticed that, for files, it says printer and no .doc or .pdF files.  He also says that it is offline.  I tried the steps recommended for this suggestion has as well and still have problems printing.  The I am trying to print the files aren't new documents except one which is a pdf file.  I hope you can help me.  The window pop up that appears just before printing a 0% for printing.  I hope that makes sense.

    Thank you.

    Maria Holloway

    HI Maria, welcome to the forums

    I noticed your post about the problem you are having with your Deskjet 3050, printing via a USB with Windows 7. I have some suggestions that I would like to offer that can help!

    Perform a clean boot and make sure that your firewall is disabled: Disabling and Re-enabling your software firewall in Windows.

    By this stage and test print while the start up programs and the firewall is disabled, it will show if the mobility programmes have been the origin of the problem.

    Now try to print a document as one. PDF or. DOC.

    If it does not, as a workaround option, try to save documents that you have an impression of question as a different file (do not use in .doc or .pdf format) type.

    Open Word or Adobe and print a blank page (without saving the document) to see if you have a problem with printing.

    Please let me know the results, I hope that my information helped!

    Have a great Wednesday

  • Can't scan on HP Officejet Pro 8500 has e-all-in-One Printer series - A910 using Cougar?

    How scan you on an HP Officejet Pro 8500 has e-all-in-One Printer series - A910 using Cougar? Whenever I try, I get the following message:

    Error message: Scanner reported an error - unable to open a session on the device.

    Hi Irossga,

    This document explains how to use the built-in features to your operating system to scan photos and documents.

     
  • OfficeJet 6500 has more All-In-one: network of disabled features

    hP 6500 has more all - in-one E710 gives the message "integrated network capabilities have been disabled contact your network administrator" when I go to network menu.  I rest to factory default and get restarted three times and still the same message.  Powered down of every thing.  Same result.

    Hello @Walt101,

    I would like to help you today to correct the message 'integrated network features have been disabled. Contact your network administrator' on the front panel of your HP Officejet 6500 a Plus e-All-in-One. This feature is programmed into the printer itself and can be disabled under webserver shipped as part of its security printers.

    If you have configured an admin lock on your printer, you must collect the IP address, your printer off and access the printers built-in web server by entering the IP address in the address bar of the internet browser on your computer. Once you access the built-in web server, you can configure the administrator lock settings.

    If you have not set up a lock on this machine to 'lock' the network capabilities, I'll have to send you a private Message with the semi-complete programming reset so that you can win your network of return capabilities. Please check your private Messages for instructions.

    Good luck!

  • How to scan a legal document size on the office jet 8500 hp has more all in one that you use?

    I need help in a legal size document scanning, when I try to scan scan only letter size, I do not know how to change the scan of a legal size scan on my officejet 8500 has more all in one printer

    To scan legal-size documents I advise to use the software that must be installed with the printing of HP scanning software. Once you open the scanner, there should be an option on the top of the window to select it scan the area. Choose "Legal (8.5x14)" and continue as usual. You want to scan from the tray as well and not from the ADF. Here is a document on the analysis of HP:

    http://support.HP.com/us-en/document/c03476857

    Keep me posted and let me know if that helps!

  • Unable to get double printing to work. new HP Officejet 6500 has e-all-in-one.

    Impossible to get double print to work after you have installed the duplexer to my new HP Officejet 6500 has e-all-in-one.  I can't find where I can change to double-sided printing in the soft ware.

    ShlomiL wrote:

    This is false,

    You should contact the dept store as was provided with misleading information.

    Below you find the accessories compatible with the Officejet 6500 a.

    As you can find in the list, the duplex accessory is suitable only for HP Officejet 6500 a more e - AiO - E710n:

    http://support.HP.com/us-en/document/c02492482

    Kind regards

    Shlomi

    Thank you very much

    Ron

  • Pages come out White HP Officejet 6500 has e-all-in-one printer.

    I have a HP Officejet 6500 a e-all-in-one printer (product # CN555A), and I had problems printing for a while.   I'm working on Windows 8, although the same problem occurs with a Windows 7 laptop that I use sometimes.
    Printer goes through all the movement of printing and pages come out sometimes very thirsty or Virgin (illegible). At the beginning, once in a while it would happen, and once the printer is rested for a few days, it works again. Now it happens all the time and I can't print.  I did ALL the steps of troubleshooting hp and nothing works.   A few days ago, I managed to have it print a little darker, but it mainly printed in gray-greenish, but after the second page, he just disappeared again to nothing.  I think it may be something on the channels contained in the cartridges of ink to the page or something like that.  Can someone help me understand this and the difficulty of my printer?

    Thank you
    )

    Considering that the yellow is almost full and is printing very well, there is actually a small chance that the low level of ink you see (approx. 25%) this is dried up in the cartridge itself.  Think of the ink as a former condiment that has been in your refrigerator for a long time.  When there are more things in the container, it is less likely to dry up, but when you have only a little inside, the air-to-ink ratio increases the chances of this being actually what caused this.

    Although it is cheaper to do the printhead of soaking, it's also much more risky than buying the new ink first.  I highly recommend making sure that you have replaced the low ink cartridges before trying the latest possible stage.

    Certainly, it is probably due to cleanups of printhead, print tests and other basic troubleshooting steps that caused you to be low on ink in the first place.  Maybe double check on the return policy of the store about the ink you buy maybe not a bad idea, either in case you do not buy, does not print, you are soaking the print head and then it also fails.

    Better to be prepared for the worst but hoped that the simplest solution is the best one (Occam's razor) is what I mean by all this.  Keep me posted on what you decide to do.  * fingers crossed *.

  • HP Deskjet 3050 a: HP all-in - one Printer Installation remotely

    How can I download and install the remote HP all-in-One Printer software without going through the MS Store?  He wants to put me in place and MS Account and put all my files, etc. on a site not on my computer.  I don't want to do that.

    @Johanned

    http://ftp.HP.com/pub/softlib/software12/COL37193/al-109013-3/DJ3050A_J611_1315-1.exe

    REO

  • Deskjet 3050 printer has J611 all-in-One series

    I can't seem to attach to my computer

    Hi cidlittle54,

    What is the operating system on your computer?

    How do you try to connect the printer to the computer?

    Installation of the software of the printer in Windows for a USB cable connection

    Install the software of the product for a wireless network connection

  • HP Officejet Pro 8500 has e-all-in-one printer A910a given to nine (Fax phone part short circuit)

    My phone service was interrupted (no dial tone) and I called my phone provider about the issue.  The dealer has diagnosed the problem and was told that the problem was with my printer. He tested the wiring and found that portion of phone of the printer has been bypass, pick up the phone line and do not hang up, which eliminated my phone service.  I had to unplug the printer telephone wire and wall split decision.  I now have the phone service and I can use the other features of my printer, but I can not use the fax feature.  Please advise... MSROZZIE

    Hi msrozzie,

    Have you tried to contact Verizon to check how they suggest you connect all the devices? One of your previous posts said you would contact them. I wonder what they suggest.

  • has 6500 all in one printer E710: 6500 HP printer prints too close to the top in all programs

    Printer prints too near the top of the page with each print job.  With printing of items such as cards, you cannot adjust the margin down so it doesn't work well at all.  He used to work, but some time ago he began to print closer to the top.  I uninstalled printing drovers and reinstalled the latest, and it does not help. I also used the doctor for HP printing and it did not help either. I spent all the rolls, etc., but din't help. Any help would be appreciated.

    Please come back to me @Birdiesis.

    The question of quality that occur of independent, it is clearer that this is strictly a hardware problem. Even though you have already cleaned the print heads, I recommend that you work your way through the following alignment oriented troubleshooting workflow:

Maybe you are looking for