HP 309 has: HP309a paper tray

Similar Questions

• PCL5 printing codes to turn off paper tray switching when the tray is in the paper

  We have a HP P4015n with 3 trays, tray we letterhead, tray 2 has plain paper, tray 3 preprinted forms (all dimensions 8.5 "x 11" paper ").  This is related to a Linux system with printing from a legacy software - they are mainly text documents that have integrated the PCL control codes.

  The problem, when a drawer is empty, print will continue to the next state bar, which can have a header of letter or preprinted form, etc.

  Can I turn off automatic tray switching?  Either using a code printer PCL or via the printer control panel?

  If I print on tray 3, this tray is empty, I want the printer to wait until the tray has paper once again and do not use a different tray.

  I played a bit with the 'document type' (letterhead, pre-printed form, etc.) setting found on the built-in printer web page, but when I send a job there, the printer needs someone to hit the 'OK' on the printer. I guess that the printer is looking for the paper incorporated in the corresponding document type.  Is there a print PCL code for that?

  I have done research on PCL5 printer control codes and can not find, or another command.

  Thanks for any help,

  This should help you:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&ObjectID=bpl05272&JumpID=reg_R1002_USEN

  On the other hand moving up to the next plateau, depends on the printer.  Some let not work continue to the next bar if the paper type is defined differently, but it is more common that the printer will just continue.  The only solution I have found is when big jobs you know will exceed capacity of the tray should just make sure that the right paper is in all stores.  The other thing is too, to keep the full trays (just make sure to put the fresh paper under the paper that is in the status bar to reduce interference issues).

  I am including the link to the history of PCL/PJL because inside under the additional Documentation, it links to PDFs of the technical manuals detailing everything that you could ever want to know about hand coding for printing using these languages:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=bpl04568

• Problems with the operation of the Second paper tray - HP Officejet Pro 8500 has more

  I just bought a second paper cartridge for my HP Officejet Pro 8500 has more. It shows up on my printer paper tray 2.  However, I can't understand how to go between the paper trays to get items to print from the individual trays.  A choice should not result when I click on PRINT?  Or if I should not be able to set up a default tray for printing on letter size, but be able to change in the other side, when I want to print an envelope?

  I will be happy to help you with this problem.

  The 2nd test is an accessory. It is not downloaded in the drivers. You will need to do the 2nd tray DEFAULT tray for stationery. Go to your settings on the printer. Choose Preferences and go to the default tray.

  The envelopes and any other type of paper in addition to the letter will be put in TRAY 1.

  Let me know how it goes.

• Selection of paper tray HP 2600n Auto setting which has stopped working

  Previously, my HP 2600n would automatically select the right paper tray... Legal or letter size.  All of a sudden, he selects is no longer the correct paper size automatically.  I have to manually select the number of tray that contains the paper of legal size.  Question: How can I correct this situation so that it will automatically select the correct paper tray?  Operating system Windows VII

  Your instructions worked perfectly.  Thanks for the step by step.  Easy to follow.  I left Bravo... I would have done the highest number 1, but I didn't know if it is possible, or how to do it. Thank you.

• OfficeJet Pro 7740: Office Jet Pro 7740 Recgonition paper tray

  I have tray 2 load paper 11 x 17 and using the touch screen says printer 11 x 17 is loaded in tray 2.

  Tray 2 is not the set HP Preferences dialogue box in paper source Options paper '.  When I try to print using the printer Auto Select on paper 11 x 17 source I ger an error message on the touch screen that the incorrect paper size is loaded in Tray 1.

  I can copy 11 x 17 paper tray 2 tray 2 by selecting from the menu on the touch screen

  Running scan doctor or the restart has not solved the problem

  Thanks for your help

  Hello
  
  Thank you for using the HP Forums.

  The resource relevant next will show you how to put in tray 2 by default and with the good paper sizes:

  HP 8740 stand (installation and using the 2nd status bar)

  HP Officejet Pro 8730/8740: Install and use a bin by default to 'copy '.

  Let us know if this helps!

• HP 6520: printer will not printer to paper tray from the photo tray which I don't use.

  Printer won't paper tray from the photo tray which I don't use. I don't know why he did it.  Printer has never been used for photos and I used it for awhile.

  K3B

  Welcome to the Community Forum of HP.

  The following could be useful, although it can't help if the printer is actually refusing to tray assignments:

  Printing options

  Click on the thumbs-up Kudos to say thank you!

  And... Click on accept as Solution when my answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• OfficeJet Pro 8600 Premium - paper tray automatic selection according to the size of the paper

  OfficeJet Pro 8600 Premium, Windows 7

  How to setup the printer such as when I'm sending a legal document that automatically selects the tray 2 (legal paper in tray 2). Tray 1 is the default, with letter-size paper tray. In 'device settings' Tray 1 is set to letter and tray 2 has the legal value.

  Thank you!

  Greg

  Hi Greg,.

  At present, the 8600 does not support this feature of Microsoft. Unfortunately, there is no work around. You must manually select tray 2:

  1 Ctrl + p to open the print dialog window.

  2 Select the printer of desire and click the preference.

  3. go tab paper/quality, then select "Tray 2" on the decline of the Source of the paper in the menu dropdown.

  See you soon,.

  Kimu

• 5742 HPOficejet e-all-in-one: retain default printer Fax and Photo paper tray

  Hello.

  The printer keeps failing for FAX and paper in the photo tray.  How can I fix this in windows Vista?

  Hello @Vanessa3,

  Welcome to the Forums of HP Support!

  I understand that when you print from your Windows Vista-based computer to your HP Officejet 5742 e-all-in-one printer the screen 'Fax' is popping up and the incorrect paper tray / support is selected. I would like to help you today to address these issues. If the "Send faxes" window appears only when you print to a specific program, there is probably a setting must be adjusted under this specific programme. If this is the case, what program are you a victim of problems when printing?  If the 'Send of Fax' window is popping up under all programs that you print from your computer, it is likely that the wrong printer is selected as the default printer in the printers and devices window. Can I please you follow the steps below to fix this problem.

  Set the default printer:

  1. Click on the Start menu
  2. Select the devices and printers or Printers (you may need to access it via Control Panel)
  3. Under the Printers folder, locate your HP Officejet 5742 e-all-in-one. This printer should display a green check mark above to indicate that it is the default printer.
  4. If your Fax-HP Officejet 5742 e-all-in-one shows like check mark on this subject, please right click on HP Officejet 5742 e-all-in-one (printer) and left click on "default".

  Once the correct printer has been confirmed as the default printer please test print to confirm that the 'Fax' problem is solved.

  Once solve us the problem of Fax, we will be able to adjust your print settings to confirm that your printer is configured to print on the correct paper and with appropriate support tray.

  How to check the paper tray settings:

  1. Click on the Start menu
  2. Select the devices and printers or Printers (you may need to access it via Control Panel)
  3. Under the Printers folder, locate your HP Officejet 5742 e-all-in-one
  4. Right click on the HP Officejet
  5. Left click on Printing Preferences
  6. On the paper/quality tab, make sure that the Paper Source is set to main tray
  7. Also, ensure that the media is set on plain white paper (if that's what you print on)
  8. Click apply and OK
  9. Close the Printers folder
  10. Try to print a document to confirm that your HP Officejet prints from the correct tray.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• HP officejet 8600 more main paper tray stuck

  I took the tray paper (main) albums and adjusted for envelopes.  When I tried to put back in, stuck, it seems on the right side.  Now, I can't go all the way in or out.  The printer is useless unless I can get this paper tray to take off.

  Hello

  Please lift the cover of the ADF (top feeder) up to the stop.
  Now, close the ADF cover (you may need to apply a little pressure).

  If the problem persists, contact HP Support for help.

  If you are in US , toll free # is 1-800-474-6836.

  If you are not in US , then log on to www.hp.com , bottom left it is an icon of the world map, click it, then select the region that you belong to, which would then provide the support options for you for this region.

  Kind regards
  Jabzi

  Help the community by marking this post.
  Your question has been answered? Mark it as a accepted Solution!
  See a great post? Give a Kudos!
  I work for HP

• HP Officejet Pro - second paper tray 8600

  My Officejet Pro 8500 Premium printer no longer works. Bought a new printer Officejet Pro 8600, the basic version. Is it possible to reuse the 8500 second tray paper on my new printer?

  I can't say with certainty, but a couple of data points suggest 'no ':

  • The part number for the 8600 Officejet and Officejet 8500 extra paper tray are different.  The Officejet 8600 extra paper tray is the CN548A, the 8500 is CM759A.
  • I have a 8600 Officejet with the additional target bonus and an Officejet 8500 has without the tray extray.  I tried to put the tray on the 8500 a 8600 and it didn't fit.

• Dell 2155CDN paper tray empty error

  Hi Dell Community

  We have a 2 month old Dell 2155CDN laser color (with numbers) running in a Mac OSX Australian Government environment.

  The printer intermittently but continually reports paper tray empty in the printer driver and does not print documents.  Restart the printer sometimes but not always solve the problem.  Open and close the paper trays sometimes but not always to solve the problem.

  Contact the support of Dell in Australia is an exercise in frustration and futility, having been informed variously that:

  -they are "too busy, please call back another time" (Yes, really)

  -Should be a diagnosis online, for which we would be charged from the start

  -the waiting queue was at least 15 minutes

  - and al.

  I would be interested to know if anyone has come across this error in the past, and what measures have been taken to solve it.

  I'd also be interested to hear about the general experience Dell support.  It's the first Dell, we bought fleet, and I am just considering decommissioning and it if we can get support when needed.

  Concerning

  Anthony Friday

  Chief Executive Officer, of the regional Council of Pilbara

  Australia

  .

  I had a similar problem, but in my case, that the documents were printing, the printer just kept Dell have reported it was paper when he was not really and seemed impression as long as one minute late.

  I found this online solution: put a piece of paper in the multipurpose tray and then print on the printer to the Mac (s). We can then remove the paper (if it has not been used for printing), and the message of paper goes. Apparently this ferry reports out-of-paper for Macs, even if for the most part - it SHOULD be in paper. Once you put a piece of paper in it, even temporarily, he clears this flag of error and the driver is no longer reported it.

  As I said, it's different than what you reported, but it could still work.

  Another thought would be that the software is printing of your staff is failing to set this product, rather than the main paper tray.

  The extent of Dell Support will - I worked with them for over 8 years, and generally they have been remarkable, especially compared to some other manufacturers. I suspect, however, given their current financial restructuring and corporate, that all their departments are missing right now. I know they have completely restructured their commercial service here in the States, and I can only assume the same for their support and operations around the world.

  I asked a sales quotation for some new equipment more than an hour ago and have not heard of my new sales team yet. My old Rep Sales would answer in a few minutes. It could be an isolated incident but...

  I am concerned by ongoing support for their printers, since they have publicly stated that they are planning to leave all but the server, network, and storage markets. Because they provided quality and good value and at least for me, had a low failure rate, I was buying their printers for a little more than three years now.

  See you soon,.

  I. Wolf Butler

  IT Director
  National Business Media, Inc..

• problem of 8600 printer install paper tray

  I've been reloading the paper tray and impossible to insert the tray into the printer.  Out of the printer, it sticks about six inches.  Can't see anything blocking it and the paper is inserted correctly.

  Hello AJayR,

  Welcome to the HP Forums.

  I see you have a problem with the paper tray goes all the way back into the printer.

  I suggest that you take a look at the sliders on the paper tray and the printer to make sure that nothing has caused a blockage and if it is clear and the tray still won't, the next step would be to call HP Total Care.

  I suggest to call the HP Technical Support to see all the other possibilities for you if you can not always get the tray in the printer. This could be a hardware problem with the printer. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  Thanks for your time.

  See you soon,.

• 7410 no option to select the upper/lower case paper tray

  I installed the latest version of the software for XP for my all-in - One 7410, but there is no option to select the lower tray.  It shows that "upper status bar.  In the past, she offered tray tray upper, lower, lower then higher, higher than the lowest, etc.  With the installation later, he seems to have disappeared.  Can anyone offer advice to recover my options (to use the lower tray, for example)?  Thanks in advance.

  Message edited by mmcphie on 06/11/2009 14:22
  Message edited by mmcphie on 06/11/2009 14:23

  Problem solved!  By chance, I stumbled on the solution of the problem in another HP forum.  There is something lacking in the register, and when you add a key word, the issue is resolved immediately.

  I found the solution below Resource Center Forums > multifunction, copier, fax & > multifunction color, then the thread titled paper tray Officejct 7410 by default (as of February 4, 2006).  When I added the registry HPDJEnableSecondTray key as Marshall has suggested, it solved the problem.  As also noted, it seems to be a bug in the software when you reinstall.

  I got lucky stumble on this solution after a few searches on Google and write here for anyone else having a hard time to find.

• HP business inkjet 1100dtn how choose the paper tray + stop printing calib random pages.

  Hello. After I finally got my 9 year old HP business inkjet 1100dtn to start printing with 8 years, print heads who threw coward (printer output) for the past 2 years last night, progress post it here:

  http://h30434.www3.HP.com/T5/Ink-toner-cartridge-printhead/HP-business-inkjet-1100dtn-first-wouldn-t...

  Now I wonder how I can choose which paper tray to print from. Since I use Windows 7 and you must use the driver for hp business inkjet 1000, I guess that the problem here? Someone else you have a solution or better another driver which works better?

  In addition, the printer keeps print calibration pages after each printing I do. The print quality is still not 100%, if only he keeps trying to calibrate because the calibrationpage it prints is of too poor quality?

  Any help would be appreciated.

  Ben of the Norway.

  I tried the driver for the Microsoft 1200dtn instead of the 1000dtn that HP has suggested. Now everything works. Duplex, tray selection, etc. Good times. :-D

• HP Photosmart C4680 paper tray Extender

  Hello

  I shot to the top of the paper tray Extender. Now I don't know how to close the paper tray Extender. Does anyone know how? I don't want to break the printer.

  The extension of the tray seems to catch something inside the paper tray.

  I guess I'm happy for anyone who gets their equipment replaced under warranty, but this seems a pretty silly way to address a minor problem of machanical with a functional device otherwise.

  Here's what I did to solve the problem with my C4780 off-warranty:

  Find a light and rigid tool which is longer than the distance between the left edge of the extension of the tray and the left edge of the paper tray. (I used a knife to... not very safe bread.)

  The tool must be long enough to reach the edge of the inside of the tray Extender to paper.

  Insert the tool into the ditch in the paper tray (where the Extender goes when it is closed) as close to the body of the printer as possible.

  Press gently on the edge of the Extender that is in the paper tray.

  The Extender should give a little. Now it is loose. Remove the tool and close the Extender.