HP 6000 printer, model E609a: turns off black ink cartridge

Similar Questions

• HP Photosmart C309a does not print after I installed new black ink cartridge.

  Printer was working fine until I replaced the black ink cartridge.
  Does not print the text in black on the printer test page.
  The States new HP printer installed cartridge.
  All other colors are working well and were replaced at the same time.
  Tried cleaning cartridges - pulling the cartridge and put back in - turning the printer off and on again.
  Also tried to restart the computer.
  Could there be a problem with the ink cartridge itself?

  REAL SOLUTION. I had the same experience, spent hours pulling my hair like children had project do to school and it was 22:00.  Your cart is clogged! Here IS THE SOLUTION! (: 1) remove all ink cartridges. (2) extract the carriage that circulate in the ink cartridges by lever on the right and the trolley lifting vertically. (3) wipe any accumulation of visible ink on the outside with clean cloth or paper towel. (4) THIS IS THE KEY: keep transport under hot running water to empty all the handwritten entries in the irrigation channels that distribute ink. Keep rinsing in clear water i.e. no sign of ink. (5) trolley dry with clean cloth and blowing in areas, you can access in order to remove the remains of the water. (6) let transport air-dry overnight. (7) Re-install transport, then reinstall the ink cartridges. 8) ENJOY YOUR PRINTER. (9) I saw many entries on this topic dating back two years, without real solution offered. I am an automotive engineer in unemployment. If HP (or anyone else) would like to hire a smart worker, engineer in the Detroit area, please inform. Thank you!

• DeskJet 5550 does not print after I installed new black ink cartridge.

  I recently got a new Dell with Windows Vista 64 - bit OS.  Printer was working fine until I replaced the black ink cartridge.  Print the control page as usual after you install the cartridge, it will not print anything else now.  Not even a test page.  I tried taking the cartridge out and put it back in.  Tried to pull the plug on the back of the printer and plug it back.  Tried turning the printer off and on again.  Also tried to restart the computer.  I downloaded the HP Print Diagnostic report and could not find any problems.  Could there be a problem with the ink cartridge itself?

  Well first of all, I went and bought a different black ink cartridge to remove the cartridge in the problem.  This was not it.  Then I unplugged the printer and cleaned thoroughly and connected plug.  Still did not work.  Then I went into the properties on my printer and started to play with the settings.  FINALLY I FIXED IT!  I clicked on the tab advanced and then click Print Processor.  I then changed to WinPrint and retried the Test Page printing under the general tab and it worked!  Woo Hoo!

• Why my printer won't use his black ink cartridge

  I recently bought a printer officejet 7500 a large format. We use it at home with a computer wireless windows laptop and my mac running OS X 10.6.8

  No matter what I put in the black and white print settings, etc., he will not use his black ink cartridge. It uses color for all printing cartridges no matter what it is. It becomes very expensive and annoying. Since the purchase of the printer, I bought a black cartridge HP new from PC world real.  Since the purchase of this, he has never used since.

  What we're doing wrong?

  Thank you.

  If the device does not black ink print, it may be a couple different things, the cause.  Have you tried to run the print head alignment feature in the configuration menu of the printer?

  If the unit is not aligned correctly, while she can have colors (including black in this) lack of printed documents.  Check out the steps described in the document, found here, to solve a problem of printing such as this one.

  Let me know how it goes.

• DeskJet 932C, you can print with just replace the black ink cartridge?

  My question is basically simple.  The printer DeskJet 932C can operate with only black ink?  Color ink was empty for a while now, but the printer kept working, printing in black and white.  Due to the cost of the ink and the absence of any income available, we just changed the black ink cartridge.  The problem now is that the printer will not print not even black and white.  Do I have to scrape some funds to replace the color ink cartridge, or y at - it another way to get the printer working with just the new black cartridge?

  Thank you in advance!

  Michael Sponable

  Hello

  Your printer can print in black only, but up to a certain point , you need tri-cartouche color otherwise it will not print. It's a little late now, otherwise if you only need to print B & W, a monochrome laser printer is very good and much cheaper to run (in terms of cost per page).

  Kind regards.

• Printing on Photo paper with black ink cartridge - J6480 - grayscale does not work

  With:, Mac OS 10.6.6 more latest software HP Print/Scan/utilities:

  The color radio button to use the black cartridge is grayed out if you choose to print in grayscale. If the color cartridge is empty, you cannot print in grayscale on photo paper. It allows you to print in grayscale on plain paper.

  In other words, that it is making me use the color cartridge for printing in grayscale on photo paper. It doesn't look good for me.

  Well Yes, that's right.  The ink in the black cartridge is an ink pigment (about particles of carbon suspended in the solution) and cannot be absorbed by the photo paper.  The ink in the color cartridge is dye based (like dye food) and is absorbed by the coating on photo paper.  That is why all the printing with black cartridge is denied when using photo paper.

  Pigmented ink is used in the black cartridge to produce the beautiful crisp text on plain paper.  There are HP printers with cartridges 'Photo Black' which are ink to dye black which can be used on photo paper.  These printers also have a black text in another cartridge which is a pigmented ink.

• Photosmart HP 5510 fails to print with the nine 364XL black ink cartridge

  The black cartridge HP 364 "SETUP" origin has worked well and I bought a black cartridge HP364XL via the HP Web site.

  I installed the HP364XL this morning, but he is unable to leave the necessary ink on the pages.

  The cartridge seems to be OK and there is no error message.  The paper passes through the usual way, but fate with no print on it.  The date on the box is September 2014, this is not out of date.

  I tried to find what the problem is.  I checked the cartridge is correctly installed and it seems to have ink inside.   I tried to print using the black cartridge again and again with different parameters, such as 'Fast draft' and 'Normal', but every time the paper emerges with no impression.  The 'supply levels' shows the black cartridge about 90% full.

  This is normally caused by the vent on the top of the cartridge being blocked, or a dirty print head. The document below will help you work out the problem. Let me know what happens.

  Black ink is missing on printouts

• my printer will not turn off

  Office Jet 6500, wireless, printer will not turn off.

  Disconnect the power from the back of the printer for 30 seconds.  Plug in and turn on.

• Black and white photos at the start of printing OK then turns reddish, changed the cartridges, same problem

  HP Photosmart C4600 all in one printer, HP, Windows7 desktop. When I try to print copies of old black & white photos, on premium Matt paper or any document (I tried all), with settings for grayscale or black and white, printing starts OK (black & white) and soon begins to print with a reddish tint. I changed the cartridge back & White 3 times with the HP cartridges and the problem persists. I cleaned my print heads, the problem persists, I tried various other parameters without result. Finally, I gave up and I went back to my old Epson 15 year for problem free Photo printing. How can this problem be fixed? Thank you!

  When you print graphics color cartridges are usually used to print even black and white.  In addition, when printing on the paper color photo is always used as the pigmented black ink cartridge is not compatible with the photo paper.

  It would seem that your color ink runs out.  See the troubleshooting steps described in this page.  Most likely, you need a fresh color cartridge.

• HP Officejet 4500 - new black ink cartridge will not print

  I just replaced a depleted with a new cartridge, HP 901 black ink cartridge and the black has completely ceased to print.  I installed a new color cartridge and it seems ok.  I cleaned the printheads several times to nothing does not.  Can someone help me?  My OS is Windows 7.

  Well, I don't know why, but the printer started working normally again.  I had turned if off for about one day and decided to try one last time before junking it and don't be, you know, it worked!  After turning on the printer, I printed a 'State' of the control panel of the printer page and - no problem.  Then I tried to print documents from my laptop and still - no problem.  I guess only time will tell if the problem is actually solved, so I'm keeping my fingers crossed.  Lisa, I hope that the demon decides to leave your printer as well.  Good luck!

• Black ink cartridge made. R there are 3 other color cartridges in the printer. I would use them instead.

  Black ink cartridge made. R there are 3 other color cartridges in the printer. want to use them.

  Hello

  • What is the brand and model of the printer?

  I suggest you to contact the manufacturer of the printer for assistance.

• Black ink cartridge will not print

  Putting in a new black ink cartridge the printer says it's there and full of new ink but when printing it don't use it. It happened the last time that I put in the black cartridge and I managed to do it finally work but don't remember what I did. Why is this happening?

  With printing black ink is not like that, there are only a few things you can try, and it looks like you did most of them. If the steps described in the following paper the link did not help, then you might make a physical print head cleaning. Bob_Headrick gave the steps to do this in the post below. If none of this does not work, you can either replace the printhead by contacting the support of HP, or you will need to replace the printer. If you are still in warranty, HP can replace the printer without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.
  
  HP Technical Support call case form:
  http://goo.GL/w7Hgh
  
  Troubleshooting print quality problems:
  http://goo.GL/FHypA
  
  Physical cleaning print head:
  http://goo.GL/DfroJ

• HP Photosmart more B210A: black ink cartridge will not print.

  The black ink will print on my printer.  I installed new ink and cleaned the print heads.  I did a review of the printer and the ink of color appeared only.  The printer is recognizing the cartridge when I check the ink levels.  The first page after cleaning came out very faint then anything.  At first, I thought that the new black ink cartridge was defective.  So I replaced it with another new - no difference.

  The only change is that I have installed all new cartridges when all printing has become very low.

  Help, please.  Thank you.

  Fushing did not work, however, we used a demo on Utube and has not used the distlled water.  That could be the problem. The printer is about 8 years old, we decided to get a new one.  Thank you very much for your help.

• Photosmart 7510 - black ink cartridge does not print

  Recently, I replaced the ink cartridges on my Photosmart 7510 C311A. These are all the "genuine HP cartridges ', full.

  Black ink (with the symbol of the Pentagon) does not print, not at all. I ran through the standard troubleshooting steps:

  Cleaning of printheads

  Cleaning of copper contacts

  * Check for a good evacuation

  My colleague in the corridor as the printer even so I borrowed his black ink cartridge and tried: same problem. The printer does not record that there is a problem, but when I run printing tests, where there should be a black ink, there is absolutely none. All other colors print correctly.

  The printer doesn't lack NOT of the printer "align" test however does not offer a suggestion of what to do from there. I've not seen - in test reports - an indiciation of the misalignment.
  
  Suggestions on what to do now?

  I had the same problem. I had replaced the empty cartridge black and suddenly, no ink. Finally, what has worked is
  (1) I removed all the cartridges and cleaned the copper connectors with wet Publix.
  (2) I got a wet paper towel and he pressed repeatedly on the silver circular vent that would be under the black cartridge. I did until no black came. Let it dry.
  (3) I replaced all the cartridges and on the printer. I went to tools/clean the cartridge. I did it a couple of times and he finally printed black ink! I confirmed by going to tools/align, and align the cartridges successfully. He had kept before crashes when the black ink did not work.

• Black ink cartridge 564XL will work in the 6510 AIO printer?

  Black ink cartridge 564XL will work in the 6510 AIO printer?

  A cartridge of the same size that the color cartridge would be the photo cartridge.  This is not interechangable with the black cartridge, you will need a black cartridge.

  document here can help.