HP 8510W boot not until the cool, the fan runs at high speed

I did a little research but didn't really much other than dust cleaning. I did this, even removed the fan and the heat sink.

Operating system: 32-bit Win7

Early days of cold, boots upwards, normally, the fan turns at slow speed. CPUID Hardware Monitor shows all the time in the range 30 c - 60 c. From a web browser will cause the fan to spped, finally at full throttle, CPUID HW Monitor says:

TZ2_ up to 90 C

TZ5_ up to 100 C

Remote1 up to 90 C

Other times remain in the range of 30 c - 60 c

The task manager's performance tab shows 1%-3% CPU, 30-40% consumption of Mem.

Close all does not help, time remain high and the fan continues to run at high speed. Reset does not succeed, it will cut down, try to restart and stop again. Finally, it will sometimes get a screen where Windows thinks it could not start and wants to fix/reinstall the files, or go back to a restore point. If to cool for 10 to 15 minutes, it will start normally with the low fan speed until something starts to run (CPUID HW Monitor and Task Manager do not cause the fan speed).

So nobody knows what TZ2_, the TZ5_ and the Remote1 map 30 5 8510W mother? Is this a real plus temp likely situation, ot possibly a problem with bios/driver not reading sensor properly?

Well well, so far, no response, but I seem to have solved the problem. I tried reverting heatsink composed of all chips connected to the conduct of heat with no improvement. By checking things right after a stop, I noticed that the graphics chip was too hot to the touch even with the new complex. This meant that it was not the heat pipe.

Ordered a used one from eBay, put it in and now it's stay nice and cool, not more than 60 C.

The part number for the heat pipe is 452227-001.

Tags: Notebooks

Similar Questions

  • Satellite A100 - the fan runs at high speed after idle standby

    Hello

    My laptop is Satellite A100-912.

    The problem is when I suspend it for more the a few minutes when the fan is running at high speed. This occurs on both Windows XP and Linux GNU. When the temperature of the two nuclei will more then 51 degrees C fan slows down and begins to work as expected. Suspended for a short time (about a minute or two) the fan speed is OK.

    I've updated to the latest version of the BIOS.

    Hello

    What version of BIOS you have installed? Has recently been the machine in for repair? A few interesting facts where I need some information to help you...
    By the way: is your machine still in warranty?

    Welcome them

  • Portege R500 - the fan runs at full speed during the recovery from sleep mode

    Hello

    The fan in my R500 works at full speed when he was in the system sleep.
    The only thing that helps is a reboot. :-/

    Is there a solution to this problem?

    Hello Allan

    I really wonder that you define this as a problem. From my point of view the problem is something else. You have a problem when you cannot boot up your laptop. You have a problem if you are unable to use certain features or if you can not open the DVD player. It is a problem.

    Back to your problem: have you tried to change the power settings, to change the method of cooling in the Toshiba power settings? Play a little with it. I optimized the use of my wholesale Satellite P200 and the fan operates at low speed. OK it is not the best example to compare the two models of laptops, but try it.

  • Re: Satellite P750: the fan rotates at high speed without load

    Hello
    I am a developer of software for the Germany and often uncomfortable in my quiet office. Well, since I got my new P750 I am facing a strange problem: while the CPU load remains very low, fan works suddenly 71% while the cpu temperature is 44% in health monitor. If I unplug the cable that the fan immediately gets quiet at 0%.

    for normal use with connected to the fan cable * always * works 64%, while having temperatures of 40%.

    I checked the settings in the power manager for the parameters of cooling system. If it is set for maximum performance on the cable and balanced on the battery, it seems completely unnecessary to let the fan run all the time, so only ist very low temperature.

    Hello

    As you probably know cooling fans are controlled by sensors on the motherboard and laptop users don t have much influence on the activity of the fan.

    In my opinion for your work you need high performance t n so I recommend you to use the power plan balanced all the time. In the balanced power plan change advanced power options > cooling method optimized battery and it should reduce the activity of fan.

    It is the same on my Satellite P500 and the laptop runs pretty quiet. Also, make sure that the laptop is placed on the desktop and noting may block the ventilation openings.

  • Re: Satellite C55-A-1JL - the fan spins at high speed after updating BIOS

    Hello

    I've upgraded the BIOS of 1.20 to 1.40 and my computer started to automatically restart after a few minutes. the fan continues to run at high speed all the time

    Someone knows why?

    Question: the laptop work properly not to mention that the fan is rotating fast?

    Generally after updating the BIOS you must always load the BIOS default settings.
    In the BIOS, press F9 (load by default), and then press F10 to save the changes.

    Try it

  • Satellite Pro S500 - 11 c is suspended and the fan runs at full

    Hi people,

    I am experiancing a problem with my Satellite Pro S500 - 11 c where close unexpectedly, it crashes and the fan runs at full speed. Discount to zero is my only option and this resulted in the windows having to retrieve a few times so I'm fearing one requiring a major reconstruction after a deadlock of the future. Until now this issue has occurred only when you use a wireless USB mobile of 3G or internet teathering via USB with my iphone 3G. Using another USB port did not help.

    If someone has encountered this problem and have a fix? No help from Toshiba?

    Best regards

    Andrew

    Hmmmm... What to say. Problem is that you use third party hardware and software and some conflicts are possible. The question is: who can help you with this?
    In general you should talk to your ISP provider at first to see what they will say about all this.

    Have you ever talked with them?

  • the fan runs full speed at the beginning upward

    HP Pavilion p6-2037cb bought 19/01/12.  Windows 7.  There is no error message.

    When I turn on the computer after it has stopped all night the fan running at full speed.  This has happened several times in the first month.  The first time, he stopped himself after a few minutes.  Then I learned to stop it by restarting the computer simply.  It still works, but what was once happen one or two times a month, happened twice in two days then you worry I the problem worsens.

    It never happens when I use the computer because I don't do anything that requires a lot of cpu or causes a warm-up.  I just surf the web and send e-mail.  No games or videos or TV.

    If it's a problem of connection fan I would like to know the nearest repair service.  I would rather that ship it.  But I can't find a list of authorized warranty repair service center.  I followed the links on HP Support Assistant but got sent to a site that does not list the pavilions.

    I need to know why the fan runs full speed at first upward and where to repair close to where I live.

    Hello mpw101,

    It seems that there is some confusion about the products of your receipt and how he explained. I have passed your thread to appropriate to review team. Someone must be in contact with you shortly so that you can discuss your experience of HP customer care.

  • Battery Tecra M11-130 with not power and the fan runs constantly

    We are having a problem with the battery on one of our laptops. When left for an hour or two the laptop turns off because the battery is dead. We have mounted a battery new but still only get about 1.5 hours.
    In addition, the fan runs continuously. I looked at the PC Healthcheck software which shows as follows:
    * Power *.
    Other costs 14%
    40% of energy consumption system
    Good battery
    * Temperature and fan *.
    CPU temperature 67%
    System internal temperature 56%
    88% fan speed

    I would like suggestions.

    > We have mounted a battery new but still only get about 1.5 hours.

    1.5 hours is a common value, you should consider that dough working time depends on its portable use.

    Battery needed to dump a lot faster if the CPU would be stressed out a lot in your case, that something could run in the background, lose power CPU performance and the dough.

    In addition, you said that the fan runs constantly this could discharge the battery too.
    Therefore, it would be interesting to know what process emphasizes the central unit.

    Start the Task Manager and check the processes tab. In the CPU column, you can find the process that emphasizes the central unit.

    In addition, to change the settings for the CPU performance and cooling of the activities in the options of Win 7 powers that would help to increase the performance of the battery.

  • do not sleep when I close the lid of the computer. Everytime I open the lid there is message that computer prepares to lock, then go to the login page. Computer gets too hot and the fan runs constantly

    I have Dell laptop with vista .lately my computer stop to sleep when I close read although the power option have been that he sleeps when the cover is closed. Everytime I open the lid it is message that ' the computer prepares lock ' and in a few seconds, it goes back to the login page. during computer work becomes too hot and the fan runs constantly even if I close the lid.

    Hello

    Follow these steps:


    Step 1
    : I suggest you to download the latest drivers for the graphics card and install it on the system and check. See the article mentioned below.


    Updated a hardware driver that is not working properly
    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly


    Step 2
    : disable the Option "Allow this device to wake the computer" for a device

    a. open the control panel.
    b. click the Device Manager icon.
    c. click on continue in the UAC prompt.
    d. right-click on the network adapter and click Properties.
    e. click the power management tab.
    f. uncheck allow this device to wake the computer.

    Kind regards
    Afzal Taher
    Microsoft technical support engineer

  • HP Envy 23 all-in-one. : HP Envy 23 all in a single C030. Blank Screen, power light, the fan runs.

    HP Envy 23 all in a single C030. Blank Screen, power light, the fan runs. After that I opened start legacy and power cord from my puss. Help me please.

    Hi there @ZiECloNE,

    Welcome to the Forums of HP Support!  I understand that you are no longer able to boot your computer after a "event for pets.  I'm happy to help you with this.

    Don't forget to check all of your connections, power cord, power adapter, and maybe try another outlet and a direct connection to wall.  If there is no change then the following test: desktop HP - computer starts not (Windows 10.8)

    Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

  • IdeaPad Flex 2 - 14 d: constantly running at high speed of the fan: 8.1 Windows

    Hello.

    I have a Flex 2 - 14 d running Windows 8.1 Ideapad and real pilots.

    The fan runs constantly at high speed.

    So I have no complaint about overheating, but instead, I have to complain about is cold knees.

    Y at - it a possibility to adjust the fan speed?

    Best regards

    Eleichstetten

    I have Flex 2-15 and suffered from the same problem. By trial and error, I found that (although not documented) a specific version of the TPFanControl (http://www.staff.uni-marburg.de/~schmitzr/tpfc.html) does not work with my laptop. Opt for the 0.62e version. It is a cool utility, has several conditions of default security in standard BIOS procedures if something is still wrong. Temperature to the fan speed mappings are user adjustible, so you must refine your laptop (default values are designed for Edge E520, so don't not necesserily ideal).

    A HUGE relief!

  • Windows vista screen remain black but the power and the fan runs

    I have a laptop of 5 years that I use for school. Normally, I have my laptop on the way 'sleep' but one day, that the display lights «» I press the power button to restart and it stops, however, when I turn it on, it will only show power and the fan runs. The screen remains black. Can someone help me, I need to access my documents from the school.

    Thank you
    c

    Hello

    Video card problems are the most common cause of this problem.

    Method 1:
    Reinstall your video driver a. right click on the taskbar and then click Start Task Manager.
    b. click on the processes tab, click explorer.exe and then click on end process.
    c. click file and then click New task (run).
    (d) in the text box to open, type explorer.exe, and then click OK.
    e. click the Start button, type device manager in the start search box, and then, in the search results.
    Click on Device Manager.
    f. double click on display adapters, right click the display device, click Update driver software and then follow the steps in the wizard that appears.

    Method 2:

    Start the computer in safe mode and run system restore

    a. click the Start button, click the arrow next to Shut Down and then click on restart.
    b. do one of the following:

    • If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.
    • If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

    c. on the Advanced Boot Options screen, use the arrow keys to select Safe mode, and then press ENTER.
    d. connect to your computer with an account of a user who has administrator rights. When your computer is in safe mode, you will see marked Safe Mode in the corners of your screen.
    e. click the Start button, type "System Restore" in the search box, click System Restore, and then click Next.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    f. choose a restore point when your PC worked as expected, click Next and then click Finish.
    g. restart your computer normally.

    Keep us updated on the status of the issue.

  • The fan runs all the time because xinetd running more than 80% all the time.  Someone else has the same problem?

    xinetd is running at 83% or more 24 x 7 devours battery in 2 hours or less and making the fan run all the time.  I am connected to a bug report, and it turns out that it was a duplicate because someone else had the same problem.  However, I have no access to the other bug report or find anything either in the discussion forums or online.  Anyone experience this problem?

    Hello gorgonzola1111,

    I doubt that someone else has this problem because xinetd does not part of macOS. Have you installed it from a package of "ports" 3rd party?

  • iMac very slow and short HOT.  the fan runs almost constantly

    My iMac 2011 short middle slow and often gets "the ball" of the computer runs hot (uncomfortable keep the hand on top) and the fan is almost always running.  Activity monitor shows the low CPU usage. Any ideas?

    EntreCheck report is due to:

    EtreCheck release: 2.9.4 (254)

    Report generated 2016-02-18 12:04:46

    Download EtreCheck from http://etrecheck.com

    Time 03:31

    Performance: good

    Click the [Support] links to help with non-Apple products.

    Click [details] for more information on this line.

    Problem: Another problem

    Description:

    iMac computer is slow, get the beach ball often enough and the fan runs almost constantly because the computer heats

    Hardware Information:

    iMac (27 inch, mid 2011)

    [Data sheet] - [User Guide] - [Warranty & Service]

    iMac - model: iMac12, 2

    1 2.7 GHz Intel Core i5 CPU: 4 strands

    4 GB of RAM expandable - [Instructions]

    BANK 0/DIMM0

    OK 2 GB DDR3 1333 MHz

    BANK 1/DIMM0

    OK 2 GB DDR3 1333 MHz

    0/DIMM1 BANK

    Vacuum

    BANK 1/DIMM1

    Vacuum

    Bluetooth: Old - transfer/Airdrop2 not supported

    Wireless: en1: 802.11 a/b/g/n

    Video information:

    AMD Radeon HD 6770M - VRAM: 512 MB

    iMac 2560 x 1440

    Software:

    OS X Yosemite 10.10.5 (14F1605) - since the start time: about 5 days

    Disc information:

    WDC WD1001FALS-403AA0 disk0: (1 TB) (rotation)

    EFI (disk0s1) : 210 MB

    Macintosh HD (disk0s2) /: 999,35 go-go (577,56 free)

    HD (disk0s3) [recovery] recovery: 650 MB

    HL-DT-STDVDRW GA32N)

    USB information:

    Apple Inc. FaceTime HD camera (built-in)

    HP Photosmart 8400 series

    Apple Inc. BRCM2046 hub.

    Apple Inc. Bluetooth USB host controller.

    Hub keyboard Apple, Inc.

    Apple Inc. Apple Keyboard

    Apple internal memory card reader

    Computer, Inc. Apple IR receiver.

    Lightning information:

    Apple Inc. Thunderbolt_bus.

    Guardian:

    Mac App Store and identified developers

    Kernel extensions:

    / System/Library/Extensions

    com [loading]. Cycling74.driver.Soundflower (1.5.1 - 2016-02-09) [Support]

    com.seagate.driver.PowSecDriverCore [no charge] (5.2.4 - 10.4 SDK - 2016-02-09) [Support]

    / System/Library/Extensions/Seagate storage Driver.kext/Contents/PlugIns

    com.seagate.driver.PowSecLeafDriver_10_4 [no charge] (5.2.4 - 10.4 SDK - 2014-01-27) [Support]

    com.seagate.driver.PowSecLeafDriver_10_5 [no charge] (5.2.4 - SDK 10.5 - 2014-01-27) [Support]

    com.seagate.driver.SeagateDriveIcons [no charge] (5.2.4 - 10.4 SDK - 2014-01-27) [Support]

    Startup items:

    HP USB EWS Gateway: Path: Library/StartupItems/HP USB EWS Gateway

    Startup items are obsolete in OS X Yosemite

    Launch system officers:

    com.apple.AirPlayUIAgent.plist [killed]

    com.apple.CallHistoryPluginHelper.plist [killed]

    com.apple.CallHistorySyncHelper.plist [killed]

    com.apple.EscrowSecurityAlert.plist [killed]

    com.Apple.cloudphotosd.plist [killed]

    com.Apple.cmfsyncagent.plist [killed]

    com.Apple.CoreServices.appleid.authentication.plist [killed]

    com.Apple.gamed.plist [killed]

    com.Apple.photolibraryd.plist [killed]

    com.Apple.printuitool.agent.plist [killed]

    com.Apple.RCD.plist [killed]

    com.Apple.SBD.plist [killed]

    com.Apple.telephonyutilities.callservicesd.plist [killed]

    [loading] 141 tasks Apple

    [operation] 58 tasks Apple

    13 killed process lack of RAM

    Launch system demons:

    com.Apple.awdd.plist [killed]

    com.Apple.ctkd.plist [killed]

    com.Apple.Emond.aslmanager.plist [killed]

    com.Apple.icloud.findmydeviced.plist [killed]

    com.Apple.ifdreader.plist [killed]

    com.Apple.nehelper.plist [killed]

    [killed] com.apple.periodic - daily.plist

    [killed] com.apple.periodic - weekly.plist

    com.Apple.wdhelper.plist [killed]

    [loading] 173 tasks Apple

    [operation] 80 tasks Apple

    9 killed process lack of RAM

    Launch officers:

    [loading] com.maintain.CocktailPurgeInactiveMemory.plist (2013-11-21) [Support]

    [failure] com.maintain.CocktailSystemEvents.plist (2012-07-08) [Support]

    [loading] com.maintain.LogOut.plist (2014-02-17) [Support]

    [loading] com.maintain.Restart.plist (2014-02-17) [Support]

    [loading] com.maintain.ShutDown.plist (2014-02-17) [Support]

    [loading] com.maintain.Sleep.plist (2014-02-17) [Support]

    [operation] com.maintain.SystemEvents.plist (2014-02-17) [Support]

    Launch demons:

    [loading] com.adobe.fpsaud.plist (2016-01-28) [Support]

    [loading] com.maintain.CocktailScheduler.plist (2016-02-18) [Support]

    [operation] com.memeo.WDMemeod.plist (2007-07-30) [Support]

    [loading] com.rogueamoeba.hermes.plist (2010-09-28) [Support]

    User launch officers:

    com.apple.MobileMeSyncClientAgent.plist [failure]

    com.apple.SafariBookmarksSyncer.plist [failure]

    [loading] com.google.keystone.agent.plist (2015-12-14) [Support]

    [operation] ws.agile.1PasswordAgent.plist (2013-12-07) [Support]

    Items in user login:

    iTunesHelper UNKNOWN (missing value)

    HP Photosmart Menu Application (/ Applications/Hewlett-Packard/Photosmart/HP Photosmart Menu.app) (2006-10-22)

    Airport demand of basic Station Agent (/ System/Library/CoreServices/AirPort Base Station Agent.app) (2014-10-07)

    Request for SmileboxTray (/ Applications/Smilebox.app/Contents/Resources/SmileboxTray.app) (2016-02-12)

    The messages application (/ Applications/Messages.app) (2015-08-19)

    WDMemeoAgent Application (/ Library/Application Support/Memeo/WD anywhere Backup/Agents/WDMemeoAgent.app) (2009-06-24)

    HP Scheduler application (/ Library/Application Support/Hewlett Packard/Software Update/HP Scheduler.app) (2010-09-17)

    Director Docker Application (/ Applications/Hewlett-Packard/HP Photo & imaging software/HP Photo and imaging Director/Director Docker.app) (2006-10-22)

    Other applications:

    [operation] 2BUA8C4S2C.com.agilebits.onepassword4 - helper (2016-02-09)

    com [running]. Growl.GrowlHelperApp.89492 (2006-12-30)

    com [running]. Memeo.WDAnywhereAgent.87504 (2009-06-24)

    [operation] com.apple.xpc.launchd.oneshot.0x1000000a.EtreCheck (2016-02-14)

    [operation] com.smilebox.Tray.61376 (2016-02-12)

    [operation] jp.co.canon.cijscannerregister.17640 (2011-05-04)

    Plug-ins Internet:

    Flip4Mac WMV Plugin: 2.3.0.14 (2009-09-28) [Support]

    FlashPlayer - 10.6: 20.0.0.306 - SDK 10.6 (2016-02-09) [Support]

    QuickTime Plugin: 7.7.3 (2016-02-09)

    Flash Player: 20.0.0.306 - SDK 10.6 (2016-02-09) [Support]

    AdobePDFViewer: Unknown (2010-04-23)

    Default browser: 600 - SDK 10.10 (2015-07-16)

    Web of Google Earth plugin: 6.1 (2011-10-17) [Support]

    Silverlight: 5.1.40728.0 - SDK 10.6 (2015-11-04) [Support]

    DirectorShockwave: 12.1.7r157 - SDK 10.6 (2015-02-05) [Support]

    iPhotoPhotocast: 7.0 - 10.8 SDK (2013-04-18)

    User Plug-ins internet:

    RealPlayer Plugin: unknown

    Safari extensions:

    1Password (2016-01-25)

    3rd party preference panes:

    Flash Player (2016-01-28) [Support]

    Flip4Mac WMV (2009-09-28) [Support]

    Growl (2006-12-30) [Support]

    Time Machine:

    Skip system files: No.

    Mobile backups: OFF

    Automatic backup: YES

    Volumes to back up:

    Macintosh HD: Disc size: 999,35 GB disc used: 421,79 GB

    Destinations:

    Time Capsul of Alan W. Voges [network]

    Total size: 2.00 TB

    Total number of backups: 65

    An older backup: 08/29/15, 06:56

    Last backup: 18/02/16, 11:39

    Size of backup drive: adequate

    Backup TB 2.00 size > (disc 421,79 GB X 3)

    Top of page process CPU:

    4% WindowServer

    2% fontd

    2% safari

    1% kernel_task

    1% sysmond

    Top of page process of memory:

    633 MB kernel_task

    Com.apple.WebKit.WebContent (4) 299 MB

    172MO Mail

    Safari of 147 MB

    Overview of 78 MB

    Virtual memory information:

    504 MB of free RAM

    3.50 used GB RAM (1.12 GB being cached)

    174 MB used Swap

    Diagnostic information:

    February 16, 2016, 12:31:30 Library/Logs/DiagnosticReports/Mail_2016-02-16-123130_[redacted].cpu_resource. diag [details]

    /Applications/mail.app/Contents/MacOS/mail

    February 16, 2016, 08:15:06 /Library/Logs/DiagnosticReports/Inkjet6_2016-02-16-081506_[redacted].crash

    /Library/printers/HP/cups/Inkjet6.driver/Contents/MacOS/Inkjet6

    Ways to help make a slow Mac faster

    17 reasons why your Mac runs slower than expected

    Slow performance of Mac? This Article addresses!

    Difficulty of slow start in OS X | MacFixIt - CNET Reviews

    How to fix the slow down time and start. | MacTip.net

    6 easy tips to speed up OS X Yosemite on your Mac.

    Avoid using third-party software that claims to clean your computer. This software does more harm than good. In addition, you don't need it. Note that all computers become slower over time even in the normal conditions of use. Generally, the experienced users erasing the hard drive and do a clean install from scratch at least once a year or every time that the installation of a major upgrade of the OS. Well sure doing so also means that you need to maintain regular and several backups.

    Add more RAM or reduce the number of simultaneously executed from applications and utilities. Remove unnecessary software such as anti-malware and that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan acti... See also:

    Before Mavericks

    Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

    Mavericks and later versions

    Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

    The ultimate solution

    Back up everything, wipe the drive, reinstall OS X and restore your data from backup. Reinstall the third-party software of original/zero media.

  • HP h8-1141 fan runs at full speed all the time

    Processor and fun of rear cooling fan runs at full speed on Pavilion h8-1141

    Solution:

    I cleaned the inside of the computer and all the fans. It was very dusty.

    Then I pressed my finger on all the cards on the motherboard to make sure they don't lose. As for the fans, I took out and put them back in.

    Now it's working. The fans are back to normal.

Maybe you are looking for