HP b209 a custom print or scan

Similar Questions

• My Hp 8600 more custom print or scan more from glass

  I have a HP 8600 Office pro jet which works OK, but suddenly it I cannot print or scan by placing a document on the glass.  I can print from my computer, but not directly from the printer.  I get an error message telling me to ' reload original in the ADF and try again "or an other error message telling me the ADF is blocked.  As I'm not using the ADF, it is meaningless.

  I tried to turn off the printer, disconnect, leaving for 5 minutes and try again, but this is not enough.

  Very frustrated because I need to analyze urgently!

  Maybe there is something in the adf file that triggered the detector? Try to lift the scanner see if there is a piece of paper or something stuck in there to open.

• My Macbook Pro shows off my HP printer online after the first use (print or digital). I have to turn the printer off and then on again to print or scan for even once.

  My Macbook Pro running El Capitan 10.11.6 shows my printer HP (envy 110) as offline after a print or scan session. I have to restart the printer each time I use it, and then the Mac it falls again after printing or scanning session.

  I loaded the latest drivers on the Apple site without success. The two are on a wireless home network.

  Help!

  OS X El Capitan: print troubleshooting

• HP Deskjet 8500 has all-in-one: printer printing and scanning in black

  Printed OK yesterday. Today it is printing full black pages, on black settings and color.  Also the complete black page scan.  Has been at rest - not off.

  Hello!
  Welcome to the HP community @ebe7fos,

  I read on how your prints and scans are now completely black when you use your Officejet 8500 printer and wanted to drop to help. Try the steps and answer all the following questions please and responds with the result, and we can go from there if necessary.

  Reset the printer and make sure it is plugged directly into a wall jack, avoiding the power and surge protectors toolbars:

  With the printer, unplug the power cord at the back of the unit.
  Unplug the power cord from the wall outlet.
  Wait at least 15 seconds.
  Plug the power cord into the wall outlet.
  Reconnect the power cord to the back of the unit.
  If the printer does not by itself, press the Power button to turn it on.

  1. How the printer is connected (USB / wireless / wired / Bluetooth)?
  2. Did you test functionality of the hardware (made copies) and they work successfully?
  3. Have you tried printing from different programs?
  4. Have you tried to uninstall and reinstall the software?
  5. Run the print and Scan Doctor and understand the results.
  6. Have you made recent changes to your establishment (moving, upgrade, downgrade, new software, new router, etc.)?
  7. Have you tried using a different USB/Ethernet cable?
  8. You see messages of error codes and if so, what they say and where do you see them?

  If you have trouble, let me know and I'll do my best to help.
  
  Click on the "accept as Solution" If the issue has reached a resolution! Hit thumbs up below like my post or show thanks to me to lend a hand!
  
  We wish you a wonderful day

• HP Photosmart 6525: cannot find printer to scan to.

  When I on the printer to scan to computer HP photosmart says not connected.

  Reinstalled software and it worked!

  Thank you

• Office Jet Pro 8600: Print and scan the doctor

  Will be to print and scan doctor run on Windows 10?

  Hi Gardener2010,

  Yes, print and Scan Doctor is ready Win10!
  Jean

• HP 8500: print and scan the doctor

  When I start printing & doctor Scan, it displays a printer that I did more.  The printer has been uninstalled 2 years ago, and there is no remaining software I know.  It has an IP address, but can't get it anywhere in Control Panel to remove the inscription in Print & Scan doctor.  How this old printer and IP address can be deleted?

  FYI - doctor Scan and Print is not software listed in the Panel, it cannot be uninstalled.  Because of this, I did a little more research and found the answer.  The culprit is ProgramData/HP/Temp/NetworkDevices / [personal information deleted]

  It is a configuration parameter (text) file that displays as long no existing printer.

  In my opinion, this refers to 2 flaws.  First of all, when uninstalling the printer HP 8500, this folder should be removed as well.  As a text file is certainly not a direct harm, except when it comes to print and scan doctor.  This leads to the 2nd edition - HP print and Scan Doctor seeks evil to this configuration, rather than a real device driver file, so he reported the HP 8500 printer as existing when there isn't.  It seems to me that print and scan doctor should know the difference between a configuration file (text) and a device driver.  Clearly if all I have is a text file, there is no such printer.

  I deleted the file and then the printer immediately disappears in print and Scan of the doctor.

• Photosmart C6280 all-in-one: connected LAN network won't print or scan

  I am running Windows 7 (64-bit) and have a HP C6280 connected to my local network. My NetGear router shows the printer as a device on my network. Windows Control Panel will display as loans and set printer as default. When I try to print, the release of the coils for the print spooler, but then shows a printing error and nothing prints. HP Solution Center shows as disconnected printer.

  HP print and scan doctor can see the printer but cannot print a test page for it or fix the problem. Cannot printer Windows troubleshooting. I put manually the printer IP address and it corresponds to the IP address used by the pilot, i.e. 192.168.1.107

  The only way I found to solve the problem is to completely uninstall and reinstall the printer and all the HP software associated with it. And then I have to do it again on all 2-3 days.

  Any ideas?

  RnR,

  Thanks for the suggestions, but I did that already, severl times. It turns out that BitDefender Firewall was interfering with my connection on printre network. After fixing manually the printer IP address and establishing a zone of confidence for the IP address of the printer for, things seem to have settled down.

  Found this solution in the HP Forum.

  Thanks for the help of yor

• DeskJet 1055: Custom printer printing, Dim. power light and back to normal

  Hello

  I bought this printer in America and I took it with me to Brazil, where I live now.

  The scanner in it works very well, and also the test page prints fine.
  
  But when I try to print my own pictures, he used impression. Its like the printer simply ignores the document. My computer tells me the print job, or sometimes didn't display any status at all in the print list. And the power light fades and returns slowly to normal.

  It has new cartridges, and I can't seem to make it work. Function print and Scan Dr. I have all possible updates and its all supposed to work very well.

  Can you guys please help me? I contacted the support to the Brazil, but told me that I should talk to HP WE.

  Its a shame that the product does not work, this printer has been barely used...

  Thank you

  Hi @Laridk,

  Welcome to the Forums of HP Support!

  I see that you are unable to print to your HP Deskjet 1055 printer. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand that the printer is capable of printing a test properly page. This seems to indicate that this isn't a hardware problem and it is more likely to be software related problem.

  Due to the slight dimming, I would like to do a hard reset to see if that will solve the problem.

  • Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  • Reconnect the power cable to the output of the printer and the wall, and not a surge protector. This ensures that the printer is full on and can help this situation.
  • Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Please confirm that you have the printer connected to the USB 2.0, rather than a USB 3.0 port.

  In addition, please try the steps in these guides:

  • HP printers -print jobs stuck in the queue (Windows)
  • HP PC - Troubleshooting connections USB (Windows 7)
  • HP printers -printer 'offline' State message (Windows 7)

  In addition, you have regionalized the printer or do you still use the ink cartridges, you bought the United States?

  Here is more information on this topic: HP printers - find and install the cartridges after moving to another country.

  When you need to use ink cartridges purchased at the Brazil. The printer should be regionalized. When this happens, contact HP.

  Contact HP for service in all countries except Asia-Pacific.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number are displayed.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• HP Officejet 8600 more print and scan problems

  Hello

  I had my HP officejet 8600 more for 2-3 years and always had problems following and just kept reinstalling the drivers as a quick fix. I am now starting a business from home and I have no time to deal with printing and scanning the questions and, of course, my warranty has expired! My operating system is OS X version 10.9.4.

  When I scan to my computer, the printer indicates "not found computer." The status of my mac is no different than when I scanned a document a few days ago! Remove and reinstall the drivers solves this problem temporarily but I want it fixed permanently.

  In addition, when printing, sometimes a page can print immediately and at other times, it may take 5-10 minutes to print even if its status is 100% full in the print queue - even once, reinstall the drivers is a quick fix but I want a permanent solution.

  Any help to solve these problems would be greatly appreciated.

  Thank you very much...

  Hello Hello!

  I thank very you much for getting back to me! Glad to hear things are working at the moment! Please take the time to click the button of "acceptable Solution", while others may see this post and they can get a fix quickly. Also if you want to say 'Thank you' click 'Bravo '. I would really appreciate one or both of these actions because it makes things easier for the new people on the Forums to get help fast.

  Have a good!

• HP OfficeJet Pro 8710: HP OfficeJet Pro 8710 print do not tried HP Print and Scan Doctor

  Hello HP Forum,

  I'm new and have read many articles on printing does not. I had this printer yesterday and I was so excited to use it! When came home... DOH! Nothing prints not! So, I used the print and Scan doctor and that fixed it... temporarily. Now it won't print and print and scan doctor said nothing! I printed something this morning, but I saw a mistake, then I went to print it again, nothing would have uttered. I'm getting a little angry that I (May) have lost $170 on this thing.

  I could really use some help please! If not, I just lost $170 on this thing.

  My system is Windows 10 1511 Pro 64 - Bit, and the printer is USB connected.

  Thanks in advance,

  HPOJPro8710

  Edit: I just tried printing HP and Scan Doctor 4.9 once again, now it works again. But this will not last forever, I need a permanent solution.

  Edit 2: I forgot to add that I intend to leave it on all the time. It is good to do? Causing my problems?  My grandparents have their HP OfficeJet Pro 8600 24/7 for I don't know how many years! haha and they have no problem!

  I got a HP OfficeJet 4630 USB connected, and I turned off each time and printed correctly. Only had to fix once with HP print and Scan doctor.

  Hi, seems that your computer is powered off the USB ports to save energy.
  Check in the Device Manager.
  Check under USB controllers.
  Check all USB hub root.

  Select power management and ensure that:

  Allow the computer to turn off this device to save power is DISABLED.

  Use a USB cable of good quality, not more than 6 feet long.

  Connect the 8710 directly to a power outlet wall.

• Download and use of printing and scanning doctor

  Here's a video that shows how to download and use printing and scanning doctor.  It will show a way to access, download and use this tool to access and rectification of scan and printing issues.  It will help to solve the problems with the scanning of the error messages, connectivity issues and other issues also. It is worth noting that this video is for Windows-based computers.

  I hope the community finds it useful.

• OfficeJet G85: G85 present in the list of devices. Do not print or scan via USB. Does scan not (seems ok) through parallel.

  I have a slightly used good job G85, I've had since. It is also connected to my PC cable to printer large and more recently a USB cable. In Windows 10, it is detected as two separate printers in Control Panel. Right click on the USB watch version my OPTIONS for print or scan and solutions for the "Properties" but doesn't actually is. "Print test page" doesn't work anymore. Printer cable version prints fine but does me no scan options when right click. It's the way it has been all the time, he was running Windows 7. Today, I had the desire to analyze something so my addition of the USB cable. Has anyone has overcome the hurdle of getting the PC not only SEE the printer/scanner but actually communicate with her. BTW, I tried HP Print and Scan doctor but it blocks just about 45% of the way through 'communicate' even with my firewall disabled. I'm sure I have the latest drivers (2013). HP Web site dropped files to download for this product. Is there any generic scanning software that could help break the communication problem?

  Sorry for the late reply. What you suggested did NOT work. It came with an error message that says "cannot delete HP OfficeJet G85 mode user-3 of Type x 64 driver." The specified printer driver is currently in use. Then I looked into 'restart the print spooler' but I got nowhere with either.

  HOWEVER, this was working. Disconnected the two cables, uninstalled the two G85s, restarted the computer. Plugged in the USB cable, printer found by 10 PC/Windows. Test page printed successfully. THEN find new devices have crossed and had Windows search to scan it found and now it works as well.

  Even if your solution did not work in my case, I thank you for the time you took to answer.

• DJ3070 B611a: print and scan the doctor

  my printer HP DJ3070 B611a just stopped to connect to my network home. Windows Help (7/64) has not solved, so excited printing HP and doctor Scan. Upgrade of downloaded software, which gave (after download, install, a lot of time) gave an installation error that has not explained. Somewhere on this site I found that I had to uninstall the old software before installing upgrades. question 1: why P & S doctor can only him before the upgrade? Many programs can and do. Or at least: tell me to do.

  After that I discovered, I followed the instructions (very many steps and options) on the removal of the old software, any software called HP..., but it did not work. I tried to install the upgrade, but not over and over again. Would take a lot of time, because doctor & pajaud (> 50 MB) checks, downloads and try to install again, although he's done before. 2nd question: why he doesn't download / upgrade is already there?

  Therefore, no connection to my home network. After connection with a cable my laptop seems to recognize the printer again, although it does not show on the printers screen in Windows. And to be printed, but not for scanning.

  question 3: If, for the print connection is ok, what can be wrong with scanning (and why is this not the same connection)?

  So beware before you use the doctor: it does not help you and does not explain or for me does not clearly what he wants me to or exactly where to look.

  Is do not support my first experience with HP software problems, stable and updates: far from average. Disappointing for a leader in the software.

  Hi HermPack,

  Thank you very much for your answers!

  The name of the software of the doctor & pajaud, according to me, is HPPSdr.exe. In the meantime, to continue troubleshooting, please try the following steps in the following order:

  • Uninstall the software. Uninstalling the printer software.
  • Clean boot the computer. How to perform a boot in Windows.
  • Disable all Antivirus programs. Disable Antivirus software.
  • Disable all firewall programs. Turn Windows Firewall on or off.
  • Create a new user account. Management of accounts of users and connections (Windows 7).
  • Reinstall using the printer HP install wizard for Windows.

  Then run the HP print and Scan Doctor, once more to check that everything works.

  I hope that these measures are useful!

  "Please click the Thumbs up icon below to thank me for having responded."

• Help! How can I configure 8.5x5.5 custom print A2 size printer

  We recently purchased a HP Photosmart 7510 e-all-in-one printer and now my Hallmark card program does not recognize custom calibration. My OS is Windows 7 64 bit. I look forward to hear from your part, thank you.

  Since I have still not received a response to my messages, dated December 7, 2011 and January 2, 2012, I phoned again the technical support line.  Although I was on the phone today for more than 2 1/2 hours (2 calls), I finally received the necessary assistance when I spoke with the 2nd person - Chelsea.  She was WONDERFUL, PLEASANT, a GREAT ability to LISTEN and was prepared to find a SOLUTION to my problem of not being able to print formats customized to my all-in-one HP Photosmart 7510 x.  Since the 7510 does NOT support custom print sizes, she downloaded the HP9500 that supports custom print sizes.  Now, all I have to do when I print from my Hallmark Card Studio program is to choose this printer and my A2 size card prints perfectly.  Thank you, Chelsea - you are awesome!  I always think with all the technologies available that HP needs to update the driver for the 7510 (that prints great plain paper and not great with printing photos) and include formats customized option as do their previous printers.

  Congratulations go to Chelsea to the Technical Support Telephone Center