HP C7280 all-in-one pump motor stalled, ink system failure

Similar Questions

• Photosmart C7280 All in One Printer, Error Message - ink system failure

  Hi, I have above named printer with an ink system 0xc18a0406 failure Error Message.

  The Printerhead cannot be taken out for cleaning, because there is no leverage. Please can you help me?

  Thank you, Cynthia

  This might help you:

  http://h30434.www3.HP.com/T5/Ink-toner-cartridge-printhead-issues/do-you-have-an-ink-system-failure-0xC-error-message/TD-p/740567

• HP Officejet 6600 e-all-in-one printer - H711a/H711g 'Ink system failure', will not print computer

  At first, it was just a problem with do not print from the computer.  Error messages had to do with the failure of the print head or do not find print head, etc..  After going through several different controls online, download the scans, etc., it does not at all, print showing an error message "ink system failure".  I tried to remove and reinsert the 4 printheads (black 932, 933 colors) and turning market and check the caps and unplug the power.  Since this is a wireless network, I can't unplug the USB.  It was the OK signal.  Now, with this error message, I don't see the home screen printer controls.  It just says: put it on and then contact HP.  Help, please.  Very frustrated (it didn't happen all at once - a first he wouldn't print from the computer sometimes, other times.)

  Wildrat58,

  If you get ink system failure and you've been through the steps that are listed in the article above the printer may require troubleshooting. You can reach support - 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number. http://www.hp.com/cgi-bin/hpsupport/index.pl - for the maintenance options.

  Good luck!

• C7280 all in one

  I get the error: 0xc05d0082. pump motor stalled. ink system has failedhp photosmart c7280. Windows 7

  Here is a page that describes how to address this issue.

  http://support.HP.com/us-en/document/c00489814

• HP Photosmart C7280 pump motor stalled

  I have a HP Photosmart C7280.  I received a Message from "Pump motor stalled with OK" on my screen.  When I press 'OK', the printer goes through a series of clicks and what looks like the head slide back.  Then I get a message "ink system failure".  (0xc05d0082 error code).  The message tells me to turn off the printer and then new.   After that, by using the power button, I received the following: "incorrect stop" you did not properly stop the computer...  Then the printer will automatically adjust the cycle to the motor 'Pump' message to a standstill

  I'm not real with these things so I write in the hope that a guru out there can help me.  My husband who is refused a "waste of time" and just wants to throw it and buy a new.  This printer is not quite 2 years old.  I can't believe it's the end of his life.  He received the messages to clear only once, but in the day, the cycle had recurred.

  Thanks in advance for any guidance.

  Have a C7280. Powered on and "Pump motor stalled" message came. Removed all ink cartridges, closed the printer and click ok. The printer has failed until the cartridge error. Put the cartridges, closed the printer and click ok. It works again.

  I hope this helps.

• pump motor stalled error on Photosmart C5180 and C6280

  When I turn on my printer, one is a Photosmart C5180, the second is a Photosmart C6280, I get an error message saying "pump motor stalled." If I switch off and on again, it clears sometimes. No matter who else experienced this on both printers. Both use only Original HP ink cartridges.

  Hi Andrew

  According to the users in this thread:

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-Setup/HP-Photosmart-C7280-pump-motor-STALLED/TD-p/500777

  There is a solution on the first page of joulem, several customers have received the help of

  I hope this helps!

• the printer displays a message that says pump motor stalled. what it means?

  HP Photosmart C7250 All In One poster "Pump motor stalled" and says to press a button which is not readable. What do this mean and what do I do about it?

  Hello

  Please follow this difficulty:

  http://support.HP.com/us-en/document/c02129313

  Kind regards.

• HP Photosmart C7280 all in one installation with windows 8.1 problems

  Hello

  I have a HP Photosmart C7280 all in one printer which worked very well on wifi with Windows 8. A few days ago I got the prompt to upgrade to 8.1. Subsequently the printer would not work and I got prompt/warning message to re - install the printer software. And I went to the control panel and deleted all the old HP software, tried to re - install the last being on the HP site... nothing will do.

  I tried to do a number of ways - manual download, download the HP software that determines what software is required, then it downloads for you...

  It seems to start unpacking all right, but then gets stuck on "Checking system" and never progresses to something else. Help!

  Hello Cam77,

  Welcome to the Forums of HP's Support. I see that you're having trouble installing your Photosmart C7280 printer after upgrading your computer to Windows 8.1.

  I have included the Windows 8: the progress bar on the Software Installation stops or stalls document. It will guide you in the steps to get the installed printer.

  Please let me know if you are having difficulties while doing the above. If you do, please let me know at what stage things are ugly and said error messages. Please also indicate how you have the connected printer (USB cable, ethernet or wireless). Thank you.

• Can not stop "auto crop" documents, scan on my HP Photosmart C7280 all-in-one

  I use a HP Photosmart C7280 all-in-one to scan documents.   My OS is Windows 7 64 bit.   I have used this configuration since January 2012 and my problem has just started in the last 30 days.  I did not any changes to the system except for the automatic updates of Windows coming out.

  I unchecked the box "automatically Crop scanned Documents" in the Advanced Document settings, but as soon as I scanned a page, the checkbox appears in the box again (in itself!) and it will automatically crop a bad document.

  No idea why this is happening and what I can do about it?

  Thanks for your help.

  Not really sure what caused it, but looks like the setting has glitched somewhere along the way and will be set when past.  Try unintalling to reinstall a new download.  Let me know what happens.

• Photosmart C7280 all in one printer keeps giving me expired ink cartridge warning

  My Photosmart C7280 all in one printer Guard giving me expired ink cartridge warning.  The cartridge has expired, but I want to continue to use it as it still has ink.  Is it possible to turn off these warnings to be boring?  I can't print until I have to recognize them!

  @ CoolBreeze202 - I'm sorry that you are having this problem with the ink cartridges and the ink expiration error message.  You can try to clean the contacts on the cartridge and the contacts inside the machine to ensure that built up on the parts are not the source of the error message. Pages 163 and 164 of the user manual will show a manual cleanup process.

  I would also do a hard reset to the printer to try to clear the error message and return the printer to a known working state. No user settings are lost with a hard reset.  Here is a link that will show you how to do a hard reset on this machine.

• HP C7280 all in one. Problem copying

  HP C7280 all in one.  During the copy with the original on the glass, the copy is fine.  During the copy with the original introduced in the extra paper tray, a vertical line appears at the same place on each copy of the product.  Maybe some soil is at this location on the device that "reads" the original document because it passes?  Any suggestions on how to get and check this out?

  Hello

  I would tell you to follow the steps mentioned the link and check if this helps out you

  http://support.HP.com/us-en/document/c00899181

  Thank you

  I am an employee of HP, these messages are consistent with my knowledge and HP is not responsible.
  By clicking on the star of congratulations in the post helped you to say thanks.
  Please indicate the position that solved your problem as accepted Solution

• HP Photosmart c7280 all-in - One Mac 10.7.1 (Lion) "Double" option is grayed out and cannot be used?

  I have a HP Photosmart c7280 all-in-One printer and a Macbook Air running OS Lion (10.7.1).

  I'm trying and who need to print via the option "Double" that appears under the menu of "Layout" drop down tab option, the option 'Double' however seem to be grayed out as if you are not allowed to use it.  I'm sure this isn't the case, I don't know how to unlock but I guess?

  I just made sure all my software was updated and is currently.

  Everything is perfect on the printer and I used it for years, thank you!  I just want to know what on earth am I doing wrong or need to do to unlock this "Double-sided" parameter, so that I don't waste a ton of paper!  Thanks again!

  Sincerely,

  DAP413

  Hi DAP413,

  To actiate the two-sided accessory, you have to enable the printer settings:

  -Enter in System Preferences > print & Scan

  -Double-click the name of the Photosmart printer to open the print queue.

  -Click the printer setup button

  -Click on the driver tab and make sure the duplex printing accessory option is checked.

• Photosmart C7280 all-in-One with HP Premium Plus Photo A4 Semi Gloss paper

  For the past two years, I have been using the Photosmart C7280 all-in-one, with Premium Plus Satin A4 Matte Photo paper and have gotten excellent printing results.

  Now that this article is no longer available I just bought some suggested alternative, which is Premium Plus Semi Gloss; but I am surprised and very disappointed by lower printing results.

  Compared to the Matt satin results, they are very much less clear and the colors appear pale and lower.

  Has anyone had similar experiences and, if so, found a solution?

  Hello graham_jester

  It is up to you. In general, the solution is marked when a particular post has solved your problem or an appropriate workaround solution. In any event, I appreciate the gesture.

• ink system failure message on HP Photo Smart C7280 all in one.

  ink system failure error message # 0xt8a0106 on HP C7280 printer all in one

  There is a document for the failures of the system of ink located here.

  Follow the prompts, and let me know if this helps.

• C7280 all-in-one print not

  I installed a new modem and router and I cannot print my c7280 all-in-one computer

  The best way is to change the SSID and password to navigate in the menu on the printer control panel wireless.

  1. press the button on the HP all-in-one Setup.
  2. press on until the network is highlighted and press OK. The network Menu appears.
  3. press on until the wireless configuration wizard is highlighted and press OK. In a few moments, a list of detected
  the networks will appear on the screen. The network with the strongest signal appears first.

  4. here, you should see the name of the new network. Select and insert your new password wireless.

  This should help you operational. I would like to know if you have any questions.

  Thank you!

  Sean