HP Compaq DC5850-SFF: Center Subwoofer pregnant or not detected by the computer?

Similar Questions

• How can I clear the notifications from the notification Center while I can not click on the delete button?

  How can I clear the notifications from the notification Center while I can not click on the delete button? I have an iphone with ios 9.3 6

  WBY can't you click on the white circle with an X in it next to the notification?

• How can I configure xbox 360 on windows XP, all instructions are for Media Center which I did not and asks the key code.

  Windows XP and using the Xbox 360!

  How can I configure xbox 360 on windows XP, all instructions are for Media Center which I did not and asks the key code.  I don't have media player. I received a key to the xbox code, BUT Media Player do not ask for it? My wireless works fine.  XBox works very well. Yes, I know that I should upgrade to Windows 7 but until my budget allows, is what I have.  Thank you.

  Try this link for XBox: http://social.msdn.microsoft.com/Search/en-US?query=XBOX%20on%20Windows%20XP&ac=3

• HP Compaq DC5850-SFF: What processor can I go to?

  Hello, I wonder what CPU my computer can be upgraded. I have a HP Compaq DC5850 small form factor with a mother of 3029: HP. I currently have an AMD Athlon 2 x b 5000, 2.6 GHz processor, 4 GB of ram (soon 8) and a map chart AMD Radeon HD 7570 half height of 128 bits.

  I was wondering if I could upgrade my CPU from an AMD Athlon II 5000 b 2.6 GHz to an AMD Phenom x 4 9750 2.4 GHz CPU with power dissipation (TDP) of 95. Please tell me if I can or cannot be upgraded. I wanted to spend for some time now, and I love this CPU.

  It's the best processor, you can move to according QuickSpecs.

  http://www.eBay.com/ITM/AMD-Phenom-X4-9600B-2-3-GHz-quad-core-HD960BWCJ4BGH-CPU-processor-/112077004812?hash=item1a184f600c:g:180AAOSwPRlXnLQY

• HP Elitedesk 800 G2 SFF: external hard drive not detected in the BIOS. Only USB Flash drives are detected.

  Hi all

  I received recently 2 new HP desktop computers.

  HP Elitedesk 800 G2 SFF

  HP Elitedesk 800 G2 TWR

  The goal is to test our real W7 x 64 image on these machines and to inject the missing drivers in the image.

  MDT 2010 to create a deployment on a USB hard disk drive.

  This disc of deployment is already used on 16 different models of HP in the company (Elitebook, zBook, EliteDesk) to install our image so I know it works.

  Unfortunately, the two HP Elitedesk 800 G2, I can't start the boot disk but I cannot to USB for a USB key.

  The USB drive is not detected and not proposed in the BIOS Menu of STARTUP.

  Only the internal HD, external USB Flash Disk, DVD and network devices are detected.

  Here's what I already checked or tried:

  • Latest Version of the BIOS installed (2.05)
  • UEFI Boot has been disabled. (not supported by our record of deployment)
  • USB ports are enabled (front and rear).
  • All types of USB devices are allowed in the BIOS
  • The start command has been changed to start with USB devices.
  • Legacy support is active and Secure Boot disabled
  • Delete the keys to secure boot
  • Reset secure by default startup keys
  • This morning, I created a new disk deployment on a USB Flash drive and it works!

  So, it seems that only Flash USB drives are detected.

  I know it is possible to return the flag removalble on a USB device to cheat the system and make it appear as a disk fixed, but I want a simple solution.

  Does anyone know a fix or a workaround for this problem?

  Thanks in advance!

  For those interested in the answer, here's the final results.

  It turns out that the hard 500 GB external drive can be detected if it is fomatted in FAT32.

  It's strange because my 16 GB USB Flash drive formatted in NTFS works very well.

  In any case, I'll create a FAT32 Partition to the Boot MDT files and put my picture (because the file is too big for FAT32 partition) on the secondary partition (formatted as NTFS).

  Thanks to the technical pre-sales team of HP who helped me with this!

• Network and sharing Center shows not connected, but the computer is connected to the wireless network

  When I open the network and sharing Center, or hold my mouse pointer on the icon of internet connection in the bottom right of the taskbar, it shows that I'm not connected to a network. However, I know that I'm connected to the internet. My internet and e-mail work correctly. Also, when I click on the 'Connect to a network' option, find the list of available wireless networks, and it shows that I'm connected to my home network. How can I make Windows everywhere where I am connected to the internet, instead of recognizing only on the list of the networks without wire-available?

  Had exactly the same problem on Windows 7 (win7). Connected to the Internet but the status showing no connection and a red cross on the network icon. Problem has also caused problems to connect to Lync and Office365 along with VPN, which apparently uses the status to check whether the connection is available.

  Found the solution here: http://social.technet.microsoft.com/Forums/en/w7itpronetworking/thread/df17c593-e78f-4878-97b0-7569307934c5

  Apparently, certain permissions gets hurt in the database record and must be fixed using RegEdit. The solution is a step by step and likely to be resolved simply by removing a cache of file using RegEdit and potentially affecting certain permissions.

  It will be useful.

• What is TV tuner/Radio (FM) for Windows Media Center tuner? How to install on the computer?

  Hello

  What is the TV tuner and FM Radio tuner? Is it a software or a difficult, how to install them on the computer? I can buy from a retailer. How will I know which is for my pc.

  Please help me to answer the question.

  Respectfully,.

  Solvemachine

  Hello

  Thanks for posting the question in the Microsoft Community forums.

  According to the description, you need to know more about the Tv tuner and tuner Radio (FM) for Windows Media Center.

  To listen to the FM radio in Media Center, you will need a tuner FM connected to or installed on your computer and an antenna connected to the tuner to receive a signal. FM tuners are very similar to TV tuners in fact, many TV tuner cards have a built in FM tuner.

  Reference:

  Listen to radio in Windows Media Center

  http://Windows.Microsoft.com/en-in/Windows7/listen-to-radio-in-Windows-Media-Center

  See also for more information about the options of TV in Windows Media Center.

  Windows Media Center
  http://Windows.Microsoft.com/en-in/Windows/Media-Center-help#Media-Center-help=Windows-7&V2H=win7tab2&V3H=winvistatab1
   
   
  Hope this information helps. Please reply with the status so that we can help you.

• HP Compaq DC5850-SFF: Why can I not overclock my processor?

  Hello. I have purchaced a 9600 B AMD Phenom Quad-Core CPU. Everyone can overclock, but I can't. My motherboard is an HP 3029 H. So could someone let me know why I can't overclock, would be great. Thank you for your time.

  (PS) I tried several overclocking programs, even those made by AMD.

  Hello

  It is locked in the BIOS. If you want to overclock build your own machine, do not use the machines of the brand. Reason: overclock machine will generate more heat and can fried a machine at any time. No seller would send customers machines returning due to lack of material.

  Hope it makes sense.

• HP Compaq dc5850-SFF black screen

  Hello. Generalize what happened: I was given one of these computers for free from my school who was said to work. I opened and installed some of the good RAM (3 GB). I also checked that all the cables are properly connected and that they were. The problem, that I get when I turn on the computer, this is what happens:

  1. The green power light turns on
  2. Hard drive green light goes on for a very short duration)<0.5>
  3. CPU and PSU fans turns at normal speed
  4. The hard drive makes a click and normally turns
  5. Then it crashes. Nothing happens, the HDD LED stays off

  The monitor does not detect a signal and turns off with the message "No Signal"

  So I tested around the components in movement and trying the procedures on the troubleshooting guide.

  1. Removed the RAM and ironed in different orders, all properly with a click. No results.
  2. Changed hard drive twice with two other people with an operating system on them. No results.
  3. Used 3 different cables for power supply and VGA monitor. No results.
  4. Tried to reset the BIOS using the F10 procedure. No results.
  5. Reset the CMOS. Not sure if this helped or not.

  I'm stuck for ideas. The computer has not been started at the top with any other perephials outside of a keyboard and a mouse (who both work on other computers). This computer uses the default CPU who is seated correctly. It does not heat and so does the PSU, but not at an alarming temperature.

  Thanks for the help.

  OK... this one, that you can ignore for sure:

  'The monitor does not detect a signal and turns off with the 'No Signal' message'

  The monitor is simply not read a graphic signal from the motherboard, so she stops.  100% normal for her to do.

  Are see you the BIOS flash screen when the PC is first turned on?  For a normal CV, you should see the logo, and then there will be instructions on which key press to enter the BIOS.

  There are two connections to focus on.

  1. the power supply to the motherboard (if it connects to the motherboard).  This should be a great 20 or 24 pins

  2. the data cable from the hard drive to the motherboard (if it connects to the motherboard).  If it is a SATA connector, it will be a small clip almost at the end of a speakerwire-like threads of connection.  If you have the IDE, there will be a large flat 20 studs who sort of looks like the power cable where it joins the motherboard

  * You can also try unconnecting and reconnecting the power to the processor.  This is I think a connector 4 pins near the processor.  Careful with the connectors because some of them have a clip on the back side of the box that you must hold in to remove the connector to the connection.  Yet once, make sure that the PC is unplugged and you are connected to the earth when there is a risk that you could touch the motherboard.

  If you have reset the motherboard, you did all you can.  However, this does not mean the PC is finished or broken.

  The situation that I had was very similar.  Power would reach the card mother and the hard drive and DVD ROM.  So basically nothing would happen.  It's so frustrating because it's not all the information to work with.  However, I made the PC out of a project rather that simply determine to fix it on the spot.  So, over time a month, once from time to time I want to spend an hour or so DIY/clean the inside etc.  As a first step, that the BIOS was not yet running.  Finally, the BIOS ran, but the drive was not found.  Finally, after having removed the hard drive once more and unplug power cable from the PSU, I reconnected it all, and the PC starts.  For about two weeks, it was on and outside, but then after this period of use of the PC was starting up every time just as usual.

  You can be in such a situation, if you want to invest time in the PC.

• dc5850: DC5850-SFF transfer to a new tower/case components

  I have a HP DC5850 SFF and I am wanting to transfer all the internal elements to a new tower with a new power supply.   This motherboard will be mounted in an ATX case?

  Hello

  What is your plan to manage the connections of propriety feeding?

• Grafic of NVS 295 card work in a Compaq dc5700 SFF

  I have a desktop HP Compaq dc5700 SFF and want to connect 2 monitors. The NVIDIA Quadro NVS 295 works in this office? It is not apear in the compatibility list.

  WalFish, welcome to the forum

  I can't tell if NVS 295 card will come or not.  However, here is theinformation provided by HP on the options of the video card of the computer.  Personally, I would not install a card that is not listed.  It is not supported by HP.

  If your problem is solved, please click "accept as a Solution.

• Remote control of my cell phone will not work after the upgrade to Windows Vista in Media Center window.

  I have a Toshiba Qosmio G35-AV600 originally shipped with Windows XP.  I did a clean install of Vista, which resulted in my remote no longer works.  It runs on my laptop. But the contoller stopped working in Media Center window.  And it does not turn off the computer.  So basically so that Vista runs the remote is useless.  I hope that someone a lot smarter than me can help you.  I looked on the forums of computer manufacturers and known issues advice with no luck. I have visited many sites looking for a solution.  Someone has an idea?  This problem is fixable?

  Check again - Device Manager this time select the option for "Show hidden devices'in view in the menu bar."

  It can show the unit.

  Other than that, you might be better off trying forums for Toshiba http://forums.computers.toshiba-europe.com/forums/index.jspa

• My center network and sharing, says I'm not connected to the internet, even though I'm

  Windows 7 professional 64-bit.

  Just got a new modem/router DSL which is wired connected to my office.  I have access to the internet by opening Internet Explorer my network and sharing Center says that I am not connected to the internet, even though I am. There is a red cross between my computer and the internet in the network and sharing Center.  Also, on the lower right part of my office internet connection symbol has a red x.  I had a home network before this new modem/router.  Now, I can't put my home network since the system says that I have no network connection.  How can I fix it?

  Hi cpark3,

  Thank you for writing to Microsoft Communities. The problem description, I understand that you receive a message from the network and sharing center that you are not connected to the internet. Provide the following information:

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode with network and check.

  Startup options (including safe mode)

  Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 2: Follow the steps in the article.

  Windows wireless and wired network connection problems

  How can I troubleshoot network card?

  So, you can read this article for more information.

  How to reset the Protocol Internet (TCP/IP)

  Let us know if you need more assistance. We will be happy to help you.

  Thank you.

• How can I find a graphics driver for my hp compaq dc7100 sff

  My computer is a Hp compaq dc7100 sff, is to install the operating system is windows 7 32 bit

  Hello:

  Please follow these instructions and see if the video driver installed.

  Your integrated graphics (GMA 900) is not capable of Windows 7.

  I can send you the link for a pilot who has to work a lot better, but you never have Aero.

  Here is the link to the driver.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = US & swItem = ob-47264-1 & mode = 4 & IDX = 0 & prodTypeId = 12454 & prodSeriesId = 3352967

  You need run the package. It will extract the drivers and it will then give you an error operating system not supported.

  Close the error window and then manually install the driver by clicking on the video controller in Device Manager. Click the driver tab click on update driver. Select the "Browse my computer for the software method.

  Navigate to: C:\SWSetup\sp34749, make sure that the include subfolders is selected and the driver should install.

  It should be much better than what you have now.

  Paul

• HP Compaq Presario Media Center SR2020NX sound card driver

  Had to re - install Windows XP (SP3) on a HP Compaq Presario Media Center SR2020NX, downloaded

  Original Realtek High Definition Audio drivers of

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=228 & LC = on & CC = US & DLC = in & sw_lang = & Product = 32450...

  and also download and install Microsoft Universal Audio Architecture High Definition Audio bus driver on the system according to the instructions

  Yet the Original Realtek High Definition Audio drivers continues to say that UAA is not installed?

  What is the problem?

  Thank you

  OK, I downloaded the AC97 audio codecs from realtek.com

  So ran the KB835221.exe found in the popular thread Re: no sound after changing Vista to XP

  http://h30434.www3.HP.com/T5/desktop-PC-sound-and-audio/no-sound-after-changing-Vista-to-XP/m-p/27615#M295

  Running the driver Realtek HD install IT SAYS STILL no UAA, but I clicked on Yes to continue, and this time around the RealTek HD Audio-install wizard kicked in and completed the transaction.

  Kudoed, Cheryl G and also found it instructive.

  http://geekswithblogs.NET/lorint/archive/2006/06/11/81540.aspx