HP Compq dx2390 format microtour: GPU upgrade

Similar Questions

• HP Compaq dx2300 format microtour CPU Upgrade requires the bios update

  Hey, my Hp compaq dx2300 format microtour came with a core2duo E4400 processor, I had an E8400 CPU because they share the same socket LGA compatible on the motherboard and it fits perfectly, only the pc does not start, then read around some sites say it is supported by my MSI motherboard A 0, 90, others only reported up to E6700 what I don't understand, is why it wouldn't work? I BIOS v1.14 (latest news on the list of dated drivers '2008'!) and can't seem to find a solution for this, please tell me what to do I don't want to be stuck with a CPU, I can't use cause it isn't a way to map mother read it, thanks in advance!

  Hello:

  Unfortunately, you're stuck with an E8400 which won't work in this PC.  See page 4.

  Here are links to the quickspecs for your model.

  http://h18000.www1.HP.com/products/QuickSpecs/12668_na/12668_na.PDF

  An E8400 processor will not work in any case with x chipset Intel 94 or 96 x chipset.

  In order to run an E8400 into a PC, there need an Intel 3 series chipset or 4 of the series.

  Of course a processor must adapt to an outlet, but is not the only criterion needed to make it work.

• HP Compaq dx2000 format Microtour - upgrading graphic support dual monitor?

  Hi, I have a question about the HP Compaq dx2000 format Microtour. The link to the form is here:

  http://h20000.www2.HP.com/bizsupport/TechSupport/DocumentIndex.jsp?lang=en&cc=us&ContentType=support...

  I was asked to provide a solution for this machine that will support dual monitor. Can someone tell me please on a possible graphics card I buy (probably second-hand) that will be compatible with the motherboard on this machine and will also support dual monitor?

  Thank you very much!

  Paul

  Hello:

  If you only run XP and don't have no plan to upgrade to Windows Vista or Windows 7 and just VGA (not DVI) output, this PCI video card should work for you, and your machine has only PCI slots.

  http://www.eBay.com/ITM/PNY-nvidia-fx5200-Dual-VGA-DDR-256MB-video-card-PCI-/160704820819?PT=PCC_Video_TV_Cards&hash=item256ac0f653

  You will need to read the installation manual on the support page and the driver of your PC because I believe that you need to change a setting in the BIOS to the PCI card to the video card main.

  Or you can search for a similar PCI card with a DMS-59 output with video split cable that goes to two monitors.

  Paul

• HP DX7300 COMPACT MICROTOUR: UPDATE THE PROCESSOR FORMAT MICROTOUR COMPACT HP DX7300

  Hello

  I have a problem on my pc when I want to upgrade the CPU on my computer format microtour HP DX7300 to Core 2 duo E6850 3.0 ghz.

  After that, the shows black screen pc and prode 9 times beep. Grateful if someone can help me on this issue.

  Thank you

  Hello:

  Unfortunately, you have installed a processor not taken in charge for which there is no solution, but to remove it and install a supported processor.

  Please see page 7 of the link below for a list of processors supported in the dx7300...

  http://WWW8.HP.com/h20195/v2/GetPDF.aspx/c04284220 .pdf

  The E6850 has a FSB of 1333 MHz, and no with a 1333 MHz FSB processors will work in the dx7300 is why your PC beeps you 9 times.

  o-Processor-E6850-4M-Cache-3_00-GHz-1333-MHz-FSB http://Ark.Intel.com/products/30785/Intel-Core2-du

• Format microtour Dx6100 display problems.

  Hello

  I have a computer format microtour dx6100.

  I've upgraded to windows 7 64 bit and everything works fine except that I have problems with the display.

  The VGA output will not go in widecreen? I can't find a driver for this problem.

  I also tried to install an Ati x300se video card pci-e 128 MB that I thought it was compatible but it seems other people have got it to work in vista compatibility mode but I have no luck with it it keeps crashing when trying to install.

  Does anyone have any suggestions of what I can try?

  Regards, Alex.

  Hey, Alex:

  Have you tried this driver for the x 300?

  http://support.AMD.com/en-us/download/desktop/legacy?product=Legacy1&OS=Windows 7-64

• Support memory computer format microtour HP 500 b

  Hello

  We are looking to add some memory to a 'Computer format microtour HP 500 b' system, I replaced it s current 2 GB stick with a 4 GB one (Kingston brand, @1333 MHz) but it boot wouln´t upward.

  In this forum I just found this link

  http://h18004.www1.HP.com/products/QuickSpecs/13724_na/13724_na.html#memory

  This means that, while he supports up to 4 GB, it only does in a 2 + 2 mode and not a single module 4 GB?

  I guess this is the model the baord doesn´t have any model printed that I could find.

  I'm going by what I could find based on a report of CPU - ID.

  Chipset

  Northbridge Intel G41 Rev A3

  Southbridge Intel 82801GB (ICH7/R) Rev A1

  Type of DDR3 memory

  Memory size 2048 MB

  Simple strings

  Frequency memory 400,0 MHz (1:2)

  DMI BIOS

  vendor American Megatrends Inc.

  version 6.07

  day 21/03/2011

  System DMI information

  Manufacturer Hewlett-Packard

  product format microtour HP 500 b

  Unknown version

  series[personal information deleted]

  UUID [personal information]

  DMI baseboard FOXCONN provider

  model 2A8C

  Revision 1.1

  Serial unknown

  With a standard business dekstop, you're a little linimted in the improvement of memory. You are right. 2 x 2 GB modules will work, but a 4 GB is very likely to start.

  As seen on this webpage to Crucial2 x 2 GB is recommended upgrade.

  Best regards
  ERICO

• 8200 elite format microtour, need of care technique for card mother/PSU

  Hello.

  I'm upgrading of the power supply in my Hp Compaq 8200 Elite format microtour.

  The /PSU motherboard uses an archaic connector that looks like a connector 6-pin inline with to the (http://i20.photobucket.com/albums/b225/r4ch3t/Aux-connector-148x200.gif). But it is connected with 4 wires (red/white, white, green, purple)

  To upgrade the PSU, I need to find a way to connect it to the new motherboard, but I can't find any information or datasheet for the motherboard or the power supply.

  Motherboard:

  SP #611834-001

  DG #611794-000

  PSEYU0JCY0W197

  AS #611793-003

  0J REV

  POWER SUPPLY:

  Model: PC9057

  PART NUMBER: 611483-001

  ALTERNATIVE NUMBER: 613764-001

  Where can I find more information about the card mother/PSU?

  What is the connector? It is standardized in some way?

  What is the combo of tensions/soil necessary for the pins?

  Thank you

  Your question would be better served in theHP Enterprise business community.  I highly recommend that you join the community and post your question there.

  This time, do not forget and give identifying information more accurate than you did in this post. In the image below, you will see how what gave you as a product identifier can be confusing.

  

• HP DX2450 format microtour slow start on the POST screen.

  Hi all

  The product name and number: HP DX2450 format microtour

  Operating system: Windows 7 Pro 64-bit

  When I turn on the PC, it takes the computer about 20-30 seconds to access the menu of POST/HP screen.  After that, it starts in Windows 7 pretty quickly and is normal.

  Then, when I hit the power button the screen is black with "no signal" displayed for about 20-30 seconds, then upward appears HP POST screen and it starts fine.

  I tried everything under the Sun for this remove:

  1 pulled all the system RAM and started with inserted individual sticks.

  2 MemTest not ran - no error

  3 HDD Regenerator only ran - no error

  4. the disk check is ran - no error

  5 disabled floppy, USB, LAN boot, groups of CD-ROM, diskettes groups, internal speaker audio in the BIOS - do luck

  6 reset CMOS - cannot set date/time - no luck

  7 Ran HP Diagnostics to start - CPU, RAM and disk hard everything is OK

  8 Ran SMART test on hard drive - everything is OK

  9. disconnect all USB devices at startup - no luck

  10 reinstalled Win 7 on another hard drive plugged into PC - no luck.

  11 upgrade BIOS to the latest worm (5.63) - no luck.

  I'm out of ideas.  I'm starting to convince myself that works it's just the way the PC and its normal for it to take 20 to 30 seconds of kick.

  The only other thing I did is upgrade RAM to 4 GB, but memTest doesn't show any errors.

  Any ideas, guys?

  Kind regards

  Jonathan.

  Hi Danjen,

  I finally discovered what the problem was.  It was the dedicated AMD Radeon 5450 graphics card I have installed!

  I took the card and returned to the integrated graphics card and it starts instantly.

  I should have known, really.  I just forgot the graphics card.

  Thanks for your help.

• GPU upgrade 2 GB Evga GTX 550 Ti suggestions?

  I am looking to upgrade to a 970 GTX Gigabyte G1 Gaming or an EVGA if I'm looking at other brands as well.

  Budget around $350.00 USD.

  I'm still doing research and research with options open but I'm really more leaning to the Nvidia 970.

  My CPU is limiting the PCI-E x 16 running at 2.0 speeds, but even with that, I think that the 970 would be

  the best choice in the GPU upgrade.  Thoughts or alternatives?  You want something that works long term and not just

  buy something cheap, until the next thing comes.

  I'm NOT a gamer I mainly webdesign so a lot of image, video and audio editing. I'm more a combination

  between an advertising marketing exec and a web developer with programming in PHP, JavaScript and all back-end

  stuff with databases and also web video and audio stuff etc... I just combine it all in the title of Web Designer for the conversation

  who actually confuses real webdesigners because I build a LOT more than just html and css pages.

  It is a type of prosumer system where it is used for work and entertainment. Watching movies and streaming video

  This works well on the current computer and I actually don't really need more of an upgrade beyond the GPU as this computer

  It meets my needs and has 2 years.  I expect to keep for a few years, I have built computers that will last

  me 3 to 5 years, will eventually build a new, but for now everything works great.

  I honestly don't care about having the biggest and best just something that will work for more than a year or two and meet my needs.

  But it seems that the GPU tech is going through a revolution where the old technology begins to be depreciated and will not be taken in charge a large part

  in the future I am looking to get a new video card might as well go with the new stuff now so it will be supported in the long term

  everyone at some point.

  I'm just confused by models and manufacturers or resellers who slap their label on Nvidia technology.  Who is the best with little no.

  problems.  EVGA seems to be popular, it's my current card brand, but I like the Gigabyte G1 with additional display ports and

  possibility of having 4 monitors at the same time IF it can be inserted into my system, it's HUGE.

  -------------------------

  Hardware specifications:

  PSU: VisionTek 800W < == will be upgrade to a 750 or 850-Watt Seasonic, Antec or Evga also.

  Motherboard: Gigabyte GA-H61M-S2PV ver 2.0

  CPU: Intel CPU i7-2600 @ 3.40 GHz Stock using stock intel cooler fan

  HD: 3 x - 1 to disk WD Blue and two black discs

  Memory: 16 GB Ram 2 x - 8 GB memory-crucial

  The blue drive is the system drive to the approximately 700 GB of the disk format and divided in two with

  Windows 7 64 bit Pro and 8.1 of Windows in dual boot.  No SSD not because of the MOBO only being 3 GB and not 6.

  It was custom built by a store of the local computer that is off from where go out of business.

  The upgrade of processor or motherboard is NOT an option that some purchased software is old school licensed

  with attached directly to the CPU and the MOBO that cost more than the entire computer to buy

  licenses (not associated with Adobe Professional software).  In addition the upgrade MOBO or CPU, you are required to

  Microsoft to buy a new license for windows and windows 7 can probably just reactivated windows 8 can not.

  This motherboard is a motherboard micro, I didn't know that until recently. I did not build the computer myself.

  I had no idea of what food was until a few days ago, but everything worked 100% for about 2 years.

  I'll have to update the bios of the motherboard before actually being able to use the new video card, but others have the same model

  and it seems to work as well... I have a request to Gigabyte but just to check before actually buying.

  Remember though it is a Ti 550 video card I currently have and almost any update would see great improvement.

  Physical size wise how much greater is the 970 compared to 550 it 2 GB Evga gtx?   I add 2 GB because it

  are other 550 which are totally different aspect that my card.

  Also if you have any suggestions for the PSU that would be much too.   So far Seasonic, Antec and EVGA are brands that seem to

  forthcoming models much earlier.  Not sure about the rating as some out Bronze models perform other models gold or Platinum so...

  Budget about $150.00 USD for a new power supply too.

  Thanks for reading this and for any suggestion, sorry that I can't upgrade mobo or cpu to be able to run amok with ideas, it is some what may be limiting.

  Essentially, it's the GPU and PSU will extend my current level of use of a few years and the GPU has better performance even with

  the other tech and bottlenecks in this particular system.

  Like Bob of the Peru said. The money you would have spent on a GTX 970 would have been much larger than any improvement in performance that you could achieve (on a systemic basis, not only a specific component). In fact, the cost of a single GTX 970 would have been almost as much money as the rest of your entire system combined - and yet, the upgrade provides more than an improvement of 5 to 10 percent in terms of total return.

  Very recently, I upgraded an i7 - 3770K and Z77 to an i7 - 4790K and Z97. Mainly because I wanted to spend my project/player and cache drive to SSD (s) in the not too distant future. (The Z77 supports two SATA 6.0 Gbps ports and 4 SATA ports 3.0 Gbps in native mode, which is the impetus for this upgrade). But in order to take account of the upgrade of the CPU, I had to get off my GPU slightly to a 660 GTX for a GTX 750 Ti (for my particular workflow, GTX 750 it performed almost as well as the GPU high-end in terms of overall performance of the system).

  That said, there are reasons to move a GPU for a GPU to budget (or even ultra-low-budget, for that matter) to a 'Warrior' or the 'monster' GPU. But improving rendering performance on such a limited as LGA 1155 Sandy Bridge platform is not one of them. And a GPU upgrade is valid IMHO only if the rest of the construction of PC is to speed - with a much higher total system start-up costs.

  Moreover, a single 1 TB WD black or blue (versions WD10EZEX and WD1003FZEX, respectively) may not achieve the best 180 - ish MB/sec - and it's on the outside tracks of his tray. A HDD WD four-year-old (Blue WD10EALS or Black WD1002FAEX) at 7200 RPM have barely hit 125 MB/s on the outside rails. As such, with disks one alone, I agree with the other responses: remember to save it upward to an i7-4790 a W97 chipsets motherboard instead of lose a single penny on this generation i7-2600/H61 (your current system, by the way, is completely maxed out on RAM to only 16 GB total - and you can not pass the RAM any more far away).

  In other words, your current PC is, indeed, obsolete (as in "cancelled" or 'is there something better now in this category', not ' is no longer useful or usable").

• Updating BIOS for motherboard Μatx-IG41-H on format Microtour Compaq 500 b

  OK, here's my problem;

  I just bought a 4GB Ram DDR3 1333 Mhz Kingston for my computer format Microtour Compaq 500 b. But when I try to connect this new RAM for my motherboard, pc gives error of RAM and that it does not open.

  It works well with other computers.

  Support members told me to update my Bios, but I can't find any update file which is updated. The only thing I could find is the following; http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = HR & prodTypeId = 12...

  I hope someone can help me with this.

  Thanks in advance...

  Here is the HP Compaq Business Desktop ROMPaq Firmware (ROM family CPT006) aka BIOS downloads for HP/Compaq 500 b/510 MT Professional computer. These BIOS/firmware updates do not appear to address any memory related questions. HP/Compaq 5xxB MT maintenance & Service Guide;

  Memory:
  The computer comes with synchronous dynamic RAM 3 double rate
  (DDR3-SDRAM) dual inline memory modules (DIMMS).
  DIMM DDR3-SDRAM:
  Media memory on the system card can be filled with up to two industry standards
  DIMMs. These media memory are filled with at least one DIMM preinstalled. To achieve the
  maximum memory support, that you can fill out the card system with up to 4 GB memory
  configured in a high-performance dual channel mode.
  For the proper functioning of the system, the DDR3-SDRAM DIMM modules must be:
  240 industry standard pins
  unbuffered PC3 - 10600 1333 MHz compatible
  DIMM DDR3-SDRAM 1.5 volts
  DIMM DDR3-SDRAM strips must also:
  support the latency CASE 9 DDR3 1333 Mhz (9-9-9 calendar)
  contain the compulsory particulars of the JEDEC SPD
  In addition, the computer supports:
  512Mbit, 1Gbit and 2 GB non - ECC memory technology
  front and double-sided DIMMs
  DIMMs built with devices DDR x 8 and x 16; Built with x 4 SDRAM DIMMs are not
  support
  NOTE: The system will not work properly if you install unsupported DIMM modules.

  The total State "up to 4 GB' plug... which is in both slots, therefore each slot can only use a 2 GB DIMM.

• HP COMPAQ 6000 PRO format MICROTOUR: busco una change bios del PARA MI PC

  I HAVE A PC HP COMPAQ 6000 PRO FORMAT MICROTOUR SERIAL NUMBER 2UA01622NL SOLO QUIERO ADDITION DEL BIOS POEQUE NO. ABRE UNA COMPUTADORA PARA CONFIGURARLA GRACIAS.

  Thank you for visiting our English HP Support Forum. We are only able to respond to messages written in English. To ensure a fast response, it would be desirable to ask your question in English. The following links are here to help you if you want to post the following language Forum.

  German: HP Kundenforum
  
  Spanish: Foro of HP users
  
  French: Forum users
  
  Portuguese: Forum back HP users
  
  Chinese: 惠普个人客户支持论坛
  
  Korean: HP 지식커뮤니티

  Thanks for your understanding

• Satellite A300 GPU upgrade

  Hello world

  I have Satellite A300 Hi and wonder if it is possible to change a graphics card in this laptop A300 (ATI Radeon 3400HD)?

  Thank you!

  Hello

  Read here of * Toshiba Technical Support *.

  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=13

  As you can see, Cpu and Gpu upgrade is not a good idea. Even if your motherboard can handle it but the Bios is not pre-tested for her. In any case, you must contact the Asp (SAV), they can tell exactly whether it is supported or not.

• HP Compaq dx2300 format microtour missing PCI Simple Communications Controller Driver (Modem?). WinXP

  Hello

  I had to restore a HP Compaq dx2300 format microtour Win XP system from the recovery partition.

  Everything seemed to work fine except no driver found for PCI Simple communication controller.

  There was no modem in Device Manager.

  I downloaded the driver for the modem on the HP website, but it will not identify / install the driver.

  Remains of the error. (no driver found for PCI Simple communication controller.)

  Any Suggestions?

  Thanks in advance.

  My apologies to Paul.

  Your label says HP Expert 2014. I made a mistaken assumption that you were part of HP.

  I agree that it probably isn't a standard part of HP. I also looked at their specs and the database driver.
  I tried to use never version on the HP web site for their standard model for Agere 56 K PCI Modem driver. He did not consider it as one appropriate driver.

  However, I could only identify a compatible driver using a new pilot identifier utility (new to me at least).

  It seems to work.

  I think I'll keep it in my toolbox in the future.

  http://www.driveridentifier.com/

  My apolgoies once again and thank you for your efforts.

• computer format microtour dc5800: BIOS dc5800 downloads hidden when Windows 7 is selected

  When I visit the download page for the format microtour dc5800, the update of the BIOS is visible if I select one operating system other than Windows 7. I'm sure that it makes the download that is difficult for many people to find. I assume that the latest version of the BIOS (1.59) is compatible with Windows 7.

  Hello:

  I recommend that you Flash the BIOS using the option F10 Flash ROM of system in the BIOS.

  Who uses only the files BACK and you don't need to still be under Windows Update the BIOS.

  If there is no update of the BIOS listed on the support page, that is who runs the Windows based flash method may not be compatible with W7, and there is a significant risk of causing irreparable damage to the PC.

  So yes, the update of the BIOS will work with any system operating, but executed the Windows based Flash utility should be performed only on an operating system supported listed on the download page of the BIOS.

• HP Probook 4510 s gpu upgrade

  Hello

  I am in possession of a 4510 s HP's Probook and I was wondering if I can get a gpu upgrade. His original CPU will also be upgraded to a t5870 a t9600.

  But I can't find anywhere the list allowing GPU to my laptop. Is it possible to find a better GPU than the 4330 current?

  Or I'm stuck with this one... some users of cell phones, that I heard that they have improved their GPU easly and they discovered all the upgrades that are supported by their laptops to service customer or something like that.

  I wonderd if someone could point me in the right direction or to show me a list of compatibility of the GPU of my 4510 Probook s

  Hello:

  The only way to update the video in most HP laptops is completely replace the motherboard by a listed in the service manual that might come with better graphics.

  Normally such a business is not worth the time or expense.

  The GPU is discrete or UMA, they both are soldered to the motherboard and cannot be removed or replaced.