HP DESKJET 2515: Unable to COPY/SCANNING

Similar Questions

• Hp deskjet printer: Hp Deskjet Ink Advantage 2515 printer scanner copier.

  Hi, my printer Hp deskjet 2515 ink advantage does not work on my laptop. my laptop is acer and windows 7 ultimate.

  the printer is not printing and copieying... What would be the problem and what is the solution.

  my laptop says that the tray must be open, but its already open, and if we use the copier it says his blocking and his flashing and there is a! sign like that.

  Thak you very much hope, can you help me

  Hello @renzy ,

  Welcome to the HP Forums!

  I understand that you get a message to open the output tray or a similar message on your Deskjet Ink Advantage 2515. I hope to help you!

  Try to open the exit tray and ink cartridge door.

  Then close the print cartridge door.

  Do a power reset to see if that will solve the problem:

  Press the power button to turn the product on.
  With the product, unplug the power cord from the back of the product.
  Unplug the power cord from the wall outlet.
  Wait at least 15 seconds.
  Plug the power cord into the wall outlet.
  Reconnect the power cord to the back of the product.
  If the product does not light by itself, press the Power button to turn it on.

  Make sure that the printer is connected directly to a wall outlet.

  I hope this helps!

  If the problem persists, give us a call directly on your printing with HP options.

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

   
  

• 6700 all-in-one - can't copy, scan or fax

  I have a HP OfficeJet 6700.    We work well until last week... He wil feel but it wil not copy, scan or fax.   The error message is "Unable to scan, copy or fax."     I remember seeing that an update was received on the printer some time before that.    I tried to restore factory settings, turn power switch, etc.   Through the tool of diagnosis without results.    Help!

  For those who have this problem.   Finally, I called customer service HP, being willing to pay just what he needed to fix this.    You would not believe this resolution!   I do not think that HP called a bug, but I'd sure like to.    This is because the printer is plugged into a surge protector.   HP KNOWS that it is a problem... but it is posted all over these blogs?  NOOOOOOO!    So I plugged the printer directly on the wall, did a hard reset by pulling on the power cord to the back of the printer, replugged the power and it worked.   What I call a bug because there is nothing wrong with my surge protector... it is something in the printer.    Told me that I can now reconnect on if overvoltage limiter I want and it'll work.   BUT... that, if/when it happens again, the solution is to plug directly into the wall again and again a reset.    Anyway, everyone to knowabout wanted this issue with printers and the surge protectors.

• HP Officejet 6600: Fax/copy/scanning does not work

  I'm unable to use my fax/copy/scan on the printer functions.  The printer works well when printing from the computer.  I've done all the troubleshooting... Disconnect, restart it (printer and computer), etc.  All the reports that I ran to the 'troubleshooting' return with all PASSES.  But when I re - try these functions, the printer display "starting fax" or "Start scan" and "start copy."  I've been here for the last 10 minutes trying to get a copy, and the screen is still showing "start copy".  And while they are 'begins', I am unable to 'x', so I put off the printer.  The printer is 2 years old and we bought the extended warranty expired 2 months ago thanks for any help you can provide.

  Hello

  I will be happy to help you with that, may I know if you have tried uninstalling the driver of your PC printer and re - install the latest driver?

  1. Uninstall the printer driver HP Officejet 6600 of Control Panel
  2. Reinstall the printer driver for HP Officejet 6600.  Here is the link to download the latest print driver: http://www.support.hp.com/us-en/drivers/selfservice/HP-Officejet-6600-e-All-in-One-Printer-series---H7/4322968/model/4323587

  'Although I am an employee of HP, I speak for me and not on behalf of HP' 'say 'Thank you' by clicking on the star of congratulations in the post helped you. -Please indicate the position that solved your problem as "acceptable Solution".

• can someone help me! I have a P4 with service pack 2 Professional windows installed in it, my problem is that I am unable to copy all files or other animals. a dialog box appears indicating the integrity of violeted files

  Ideas:

  • Programs you arecan someone help me! I have a P4 with service pack 2 Professional windows installed in it, my problem is that I am unable to copy all files or other animals. a dialog box appears indicating the integrity of files violeted the problems with
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  bastyav,
  We use the exact and some error message in more detail on the issue.  This problem occurs with any file on the disk or only some of them?  You are logged as administrator?  Has anything changed recently (hardware or software)?

  The first thing I would say to run a Virus scan and malware.  If you do not have an antivirus program, then you can get one here: http://www.microsoft.com/Security_essentials/

  If there are no problems found then not try the following steps:
  Run the following commands.

  Chkdsk /r

  http://support.Microsoft.com/kb/315265

  sfc/scannow

  http://support.Microsoft.com/kb/310747

  Let us know the results and the information requested.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I'm unable to copy files from an iMac on external hard drive

  I'm unable to copy files from an iMac to external drive which is formatted in NTFS, but the same external drive works in two ways on my MacBook Pro! I have Paragon NTFS installed on the macbook pro and iMac, should not too external drive work on my iMac in both directions. Can not understand what is happening

  You are running the same version of Mac OS x on a Mac?

• HP Deskjet 2515: Printer has ink but printing does not correctly

  When printing it prints only "BOLD" colors, but it comes out of light. The words light out even at all. The ink cartridges is half full and even put in new ink cartridges. I Redid the test of ink and a number of other things, but nothing helped. Please help.

  Welcome to the HP community @MaineF,

  I wanted to reach out and try to help you with the problem you are having with your Deskjet 2515 printing with print quality problems. I understand the ink cartridges have sufficient ink levels, and that you have already tried a few troubleshooting.

  Here's the guide I recommend for you: HP Deskjet 2510, 2520 printers - solve print quality problems

  If the quality does not improve, I then and finally suggests contacting HP directly. They can discuss your next printer options, as a replacement or a trade in if they are available.

  Click on the thumb to below testify my help!
  Click on the "accept as Solution" if I'm you guide to a solution!

  Have a great day!

  Contact HP:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• Print file stuck in the coil, the message "unable to copy the name of the file: it is used by another person or program".

  Recently, I tried to capture a job by a break of a print queue, print work and copy the files from the spool (under C:\WINDOWS\system32\spool\PRINTERS) before unpausing the queue. However, when I try to copy the files, I get the error message "unable to copy the name of the file: it is used by another person or program". I tried several times with the same result. The only way to get the file off the ground is obviously t reactivate the print queue and they will quickly deteleted shortly after. Is there a way I can recover these files? Assume the change the port in 'File' to make a copy of file is on the table. I ran this in the title of administrator user rights.

  The file you are trying to "capture" you will do some good.  However, if you want to watch or copy it, first stop the print spooler.  Open the Services applet (start > run > services.msc > OK).  Scroll down to "Print spooler" and click "Stop".  Don't forget to restart the print spooler after you copy the file or you will not be able to print.

  

  If you want to print to a file rather than on paper, there are at least three ways to do it (not counting "Print to a file").

  Using the "Print to file" box will produce a *.prn file.  It contains commands specific to the printer; It cannot be opened by the usual word processor applications; It can be used to print to the printer selected in the print dialog box or printer that uses the same commands to the printer.  For example, you have a printer installed on 1 computer but you have physically moved the printer to computer 2, where it is now installed.  You can check the "Print to file" on the computer 1, save the file to a flash drive *.prn, carry it to computer 2 and then print it out by copying the file to the printer (in a command prompt window).

  1. the best way, IMO, is to print to a PDF using free CutePDF Writer.

  2. you can create a "generic, only the text" printer and select this option when you print.  This produces a *.txt file.  To install the generic/text printer only, follow these steps:

  1. Click the Start button, point to settings, and then click Printers.
  2. Double-click the add printer icon.
  3. Click the next button.
  4. When you are prompted "How is this printer attached to your computer? Click the local printer option button, and then click Next.
  5. In the manufacturers box, click Generic. In the Printers box, click generic/text only, and then click Next.
  6. In the available Ports box, click FILE, and then click Next.
  7. When you are prompted "do you want that your Windows-based programs to use this printer as the default printer?" click the no option button, and then click Next.
  8. When you are guests "would you like to print a test page?" click the no option button, and then click the Finish button.

  3. use the Microsoft XPS Document Writer, which may already be installed on your computer.  "XPS" was Microsoft's attempt to compete with Adobe PDF.  He did not.  Unfortunately, the only way to view a document produced by the XPS Document Writer is using the Microsoft XPS Viewer.

• HP settlement 8710, 8720, 8730, 8740: HP Officejet Pro 8720, 8710 unable to print/scan/setup or connect via ethernet and wireless

  Hello

  I'm unable to print/scan/setup.  I can't connect without wireless or ethernet, both wireless and ethernet connection are turn off... what should I do?

  Hello

  Try these:

  1. on the printer Panel, drag to the bottom of the drop-down list and select the Configuration icon.

  2. on the Configuration tab, select 'tools '.

  3. choose "Restore Factory Default.

  4. you will see a message appears asking if you are sure you want to restore the default settings.

  5. tap Yes. A message appears indicating that the default printer have been restored.

  6. press the home button () to return to the main screen.

  7 run the "Wireless Setup Wizard" from Control Panel if you need of a wireless connection.

• Error message "unable to copy the file"hiberfil", it is used by another person or program." Problem copying content from your PC to external hard drive.

  Original title: problem to copy content from your PC to external hard drive.

  I use Windows XP 2000 and am trying to restore my pc to factory settings as it is continuously 'stick '. When you try to copy my drive "c" on an external drive I get a message saying "unable to copy the file"hiberfil", it is used by another person or program." Close any program that might be using the file and try again "." What is 'hiberfil' and how do I close it down as I am not aware that I use?

  Concerning

  Pete

  The hiberfil.sys will be created every time that you start... If you put in hibernation enabled in your control panel, Power Options and the file is 'open' to think that you can actually choose to Hibernate at any given time.  When you Hibernate XP gives a note of it and will write a hiberfil.sys sometimes important in the c:\ folder so that when XP fires again upwards and returns from hibernation, XP will read the hiberfil.sys file and return to the situation that you were in when you put into hibernation.

  I use to be a chronic hibernant because it takes less time to return after hibernation as a cold start.  Sometimes, it can actually be slower that a cold so start your system based on the amount of RAM has.  The more RAM you have, the more your hiberfil.sys will, if sometimes it's faster to move with just a cold start if you Hibernate (26,03 seconds for me).

  If hiberfil.sys is giving you a hard time (you would not in any way copy it) disable hibernation in your Power Options and the file will be deleted immediately since it would be is no longer necessary.  That would solve this, but if you are trying to copy the entire C drive, you will have other files to complain after that.

  It is certainly possible to make a complete copy of the C drive, if you want, but you will have to initialize on something next to your drive hard if you want to do this so the XP files are not used - then you can copy anything and everything.  You can get some imaging software of disc that will also help you.

  It depends on what the problem is you want to solve and what you wand to end up with when you're done (so far, unspecified).

  I would work on figure our why your XP is paste and fix it in place.  XP should not be sticky.

• Adjust the size of a copy/scan on a 8600e

  We are considering purchasing a 8600e HP.  It is essential that we can set the output to a copy/scan (enlarge or shrink) by a specific percentage.  In other words, we can use the screen touch to select the scan to be (for example) expand to 120% or narrowed to 68%?  We have an old HP printer that has this option, and we also have a different brand printer whose size fits are more limited.  I searched the manual online, but is not specific on the size adjustment.  Thank you.

  Hello moneeman1

  I just checked on my Officejet more 8600. During a copy, you can set the option of resizing in custom percentage. I was able to get to 68% and 120%.

• DeskJet 2515: HP Deskjet 2515 refusing to be saved

  Hello

  I have problems getting my HP Deskjet 2515 to register on my Macbook Pro using OS X Yosemite. I usually have no problem using this printer on my laptop, but connected computer in about a year. I tried to use different cables USB, reinstall the software and the addition of the printer using the preferences of Apple systems but the printer will not be shown simply on my laptop. This printer is no longer compatible with OS X Yosemite? Why the driver doesn't let me complete the system implemented? Help, please!

  Hey @Sheepie,

• HP Deskjet 3050 J610: HP Deskjet 3050 J610 will not scan

  My Deskjet 3050 J610 will not scan. On the printer I ask him to sweep and I get "error Scan. Try the Scan of the computer.

  I have no instructions to achieve this. There is no icon for scanning and no sense.

  Thank you for your response. I downloaded and tested the necessary software and it worked perfectly.

  Thank you for helping me with a resolution.

• HP deskjet 2515 print mirror image

  How can I print image mirror on a deskjet 2515 when there is no option to mirror image found on the properties of the printer

  Hello

  You can use the flip option when sending print flip GOLD image before printing:

  http://support.HP.com/us-en/document/bpu02032

  Kind regards.

• why I'm unable to copy data to the USB in windows 7

  why I'm unable to copy data to the USB in windows 7

  Hello

  You don't say how you try to do.

  You can right click on the data you want to copy to the USB > hover the mouse on send in the list > in the Sub Menu that appears choose the USB by clicking left on it and the data must be copied to it.

  It is also to select the data you want to copy > press Ctrl + C > click in pen drive > press Ctrl + V

  Another method is to drag and drop the data from one drive to another.

  See you soon.