HP deskjet 5150 does only print one line at a time

Similar Questions

• My deskjet d1455 printer only prints one line at a time, every 30 seconds

  How can I fix?

  This is caused by the failure of one of your cartridges.  Remove the black print cartridge and print a test page.  The printer prints at a normal speed?  Is therefore the black cartridge was the issue and needs to be replaced.  If it isn't then, put the black back cartridge in and remove the color cartridge and the test page printed.  If the printer now prints speed the color cartridge is responsible and must be replaced.

• My Deskjet 3520 does not print envelopes. None of the proposed solutions work.

  My DEskjet 3520 does not print envelopes.  I tried all the solutions, and none of them work.  My operating system is Windows XP Professional SP 3.  The computer is a Dell inspiron 530.   There is noe error messages.  When the envelope comes out of the printer, it is empty.  When an 8.5 x 11 piece of paper is in the printer, the address information prints on the right edge of the paper in landscape format.

  My conclusion is that there is a serious error in the software.

  If there is any workaround I would be grateful to receive them.

  Charlie Wingo

  I simply "duped" the copier and formatted the envelope to print in the center of an 8 1/2 X 11 inch paper landscape page.  It took a few violins, but I've got envelopes printing.

• HP deskjet 5440 does not print images in a word document

  HP deskjet 5440 does not print images in a word document. Using Windows 7 Ultimate 32 bit.

  No problem.

• Can I install Acrobat Pro DC on two computers with one subscription? I have my mac for the trip, but a PC for my office. I only use one device at a time - don't want to buy two subscriptions. Thank you

  Can I install Acrobat Pro DC on two computers with one subscription? I have my mac for the trip, but a PC for my office. I only use one device at a time - don't want to buy two subscriptions. Thank you

  Yes, your license allows this.

• HP Deskjet 2540 all-in-one: HP Deskjet 2540 does not print

  I bought my printer a while ago and implemented so I could print wireless from my Mac. The other day I had to print some PDF documents and printed first, but the other two never printed. In the queue, it says "ready to print" and the two buttons wireless to the printer are turned on. It also does not print when I connect it to the USB port. But when I print the test page, which printed fine.

  Hey @bess-stanton1,.

  Welcome to the Forums of HP Support!

  I see that you have some problems with your machine printing Mac OSX 10.11 for the all-in-one printer Deskjet 2540. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. Disconnect the USB cable if it is connected.
  2. Turn the printer off.
  3. While the printer is turned off, disconnect the power cable from the back of the router.
  4. When the lights come back on the router, turn on the printer.
  5. Close any programs you have open.
  6. On your Mac, click on your Apple icon, system preferences and printers and Scanners.
  7. Hold down the CTRL key and click on an icon of your printer on the left.
  8. Click on reset printing system.
  9. Click the 'more' in the lower left corner.
  10. Select your printer from the list.
  11. Click in the box next to and select your printer from the list.
  12. Click on Add.

  Please let me know if you can print after you follow the above. If you can, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP Deskjet 3050: deskjet 3050 does not print the JPG files in color - all other documents are printed only in black and white

  Dear all,

  I have a problem with my Printer 3050 Deskjet. (USB connected with my laptop).

  My printer does not print documents colors in color, but only in black and white (with the exception of JPGs (photographs) which are printed in color.

  Word or PDF documents (for example) are always printed in black and white - even if they are in color.

  Copy of pages in color on my printer is not a problem.

  This works perfectly well. The printer is connected to my PC via USB.

  Cartridges (color and black and white) are practically new and original HP cartridges.

  Could the problem be associated I could have changed by accident print settings.

  Thanks in advance for your advice.

  Cheticamp

  Hi Cheticamp,

  In controlling panrl → devices and printers.
  Right-click on the printer and select Printing Preferences.
  Cot the Advanced button and make sure that grayscale printing is set as stop and confirm.

  From within Word, click file > print and click settings.
  You will see the screen Lady printing preferences.
  Press Advanced Options and check the optio grayscale is set as off for Word as well.

  Hope that helps,
  Shlomi

• HP Deskjet 710C does not print colors (also after changing the cartridge with a new one)

  HP Deskjet 710C on Windows XP

  Problem: Printer does not print color. Black printing works. It also does not print color now, I changed the color with a new cartridge. Remove the printer from Windows XP and reinstall also does not resolve it. Also by using the option in Windows/printer driver for the cleaning cartridge has failed. Anyone know a solution to this?

  There is a document about the lack of color of the issues on the printer Deskjet 710C that can be found here.

  I hope this helps!

• Deskjet F350 all in one printer: deskjet F350 does not print

  The printer will print after replacing more paper in the middle of a print job. Checked for paper jam and it is clear.

  No error message flashing.

  @karlsruhe57, welcome to the forums!

  I read on how your Deskjet F350 will not print once you have replaced most paper during a print job. What comes to mind, is that the printer can think it's even more paper.

  Try to reset the printer and restart the computer and try again to print.

  Reset instructions:

  • Press the power button to turn the product on.
  • With the product, unplug the power cord from the back of the product.
  • Unplug the power cord from the wall outlet.
  • Wait at least 15 seconds.
  • Plug the power cord into the wall outlet.
  • Reconnect the power cord to the back of the product.
  • If the product does not light by itself, press the Power button to turn it on.

  Let me know what happens!

• DeskJet 1515 does not print the bottom of a page

  Hello Andrew, could someone help me cause I don't know how to fix it. my all-in-one deskjet newly purchased 1515 series does not print the lower part of the page. for example, I insert a border line and then when I press ctrl-p printing layout page showed that the bottom border was not there despite the margins are correct.

  Hello Aldwin06and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you have problems with your impressions.  I'd love to try to help you, but I need some information first. I'm a link a few HP Support documents below that will show you how to find what operating system you are using. In addition, if you are using Windows, please indicate if your operating system is 32-bit or 64-bit. With this information we can provide you with accurate information.

  Mac OS X: how to find which Mac OS X Version is on my computer?
  Operating system Windows am I running?
  Is the Version of Windows on my computer 32-bit or 64-bit?

  In addition, this problem occur when printing several programs?

  Please let me know what you find.  Thanks for posting on the HP Forums!

• DeskJet 3511: HP Deskjet 3511 does not print images

  My printer has stopped printing images. I can print text documents, but with images (I tried jpgs and pngs) it starts work, print the first few lines, then freezes. Print Manager continues to show "print page 1, 49% complete... "Finally, printer spits out paper with the incomplete picture. Then State happening to 'Idle' and nothing will be printed. I tried printing suspension/resumption, restart the printer, printer removal/re-adding (same uninstall/reinstall) nothing works. I'm on Mac OS 10.7.

  Hey @jessicajones6,

  Welcome to the Forums of HP Support!

  I would like to help you today to solve the printing problem you encounter when you try to print images of your HP Deskjet 3511 e-all-in-one printer to your Mac OS X 10.7. Because the printing process seems to be 'frozen' and you cannot print anything after that this problem occurs that I think that this issue can be linked on the Mac driver. To solve any driver or software can I please have you follow the steps below.

  Step 1: Resetting the printing system:

  I'll have to start resetting the printing system on your Mac, as it is important that we have a pleasure to work with for troubleshooting clean slate. Please click herefor instructions on how to perform the reset. When the website opens, follow the steps under 'Reset the printing system in OS X Lion'. This Reset deletes each printer on your Mac. However, it does not uninstall printers. Therefore, if use you other printers on the Mac, once the reset is complete simply make sure printers are attached via a USB cable or connected network and (+) add hide them po do add not your HP Deskjet back in right now.

  Once the reset is complete, proceed to the next step.

  Step 2: Uninstall the drivers and software:

  Please click here to find out how to properly uninstall your printer. Once the site opens, select the drop-down menu 'Mac OS X v10.6, OS X v10.7, OS X v10.8 and OS X v10.9' and follow the steps to complete uninstallation.

  Once the uninstall is complete, please continue on.

  Step 3: Check and repair your Mac disk permissions:

  1. Open Macintosh HD and go to Applications
  2. Go to the Utilities folder
  3. Open disk utility
  4. Select the hard disk volume, you use (usually on the left)
  5. Select verify disk permissions
  6. Once this process is complete, select repair disk permissions

  Step 4: Check the Apple updates: 

  1. Go to the Apple
  2. Select System Preferences
  3. Select software update
  4. Click update now
  5. Install your available updates
  6. Computer restart

  Step 5: Install the device:

  1. Please click here to download the drivers for your device
  2. Once the site opens click on the download button in the upper left corner
  3. Once the download is complete, follow the instructions on the screen to install your printer

  Once the installation is complete please try printing an image to check if the problem has been resolved.

  Please reply to this message with the result of your troubleshooting. Good luck!

• HP deskjet 3620 does not print on the internet

  My hp deskjet 3620 is taken offline whenever I try to print a page of IE 11. Is the problem of the printer? I can print out IE 11.

  Hi esac42,

  I understand that you are not able to print from Internet Explorer to your HP Deskjet 3620, your printer goes offline. You are able to print from other programs without problem, until that we know there is no problem with the DJ 3620. Can you please let me know the exact operating system you use?

  I would like that run you HP print and scan doctor- it was designed by HP to offer users the features and troubleshooting problem needed to solve many common problems experienced with HP print and scan the products related to Windows computers.

  If you run the PSDR and still get the error the printer offline, I would like to continue you here: "Printer is off-line" Message appears on the computer and the printer does not print, I know it's only IE that you are having problems with, but please fill out all of the recommendations.

  I'll watch for your reply.

  Thank you

• HP Deskjet 2540: Does not print correctly

  Hello!

  I was wondering if everything can perhaps help me?

  I'm in Uni and so have to print several etc test and for all these front page - but every time I try to print this cover on the printer page or amends the provision does not print. Why is this?
  The cover page looks essentially like a chart with several boxes.

  And even if there is enough paper in the printer it says exactly the opposite, I want this problem is easy to fix (remove the film and put it again), but it's starting to annoy me

  Is there something I can do?

  Thank you in advance!

  Hello @alinah,

  Welcome to the Forums of HP Support!

  I understand that you are printing problems when printing a cover sheet with your tests to your computer Windows 8.1 for the all-in-one printer HP Deskjet 2540. In addition, you have met your printer issues as well with intermittent 'in paper'. I want to help you solve these issues today.

  To be honest, the paper intermittent power issue and the cover page number can down to a problem of programming with your printer. If your "brains" of printers is corrupt in any way that the printer is not responding correctly. To make your printers programming up to date, please click here. When the site opens, select the download button at the top left. Allow the download to run. Please follow the instructions on the screen to complete the Firmware update of the programming.

  Once the update is complete test please print again. If the number of cover persists, please continue to the next step.

  Add another driver:

  It is likely that the driver for Deskjet you use is in conflict with your Windows 8.1 operating system, even if your printer is compatible with the Windows 8.1. To ensure that a driver conflict provokes questions, please follow the steps below.

  1. Open the Start screen (by selecting the windows start button in the lower left corner or by selecting the "Windows" button at the bottom left of your keyboard to the left of the 'Ctrl' key
  2. In the start screen, type "devices and printers".
  3. If the option devices and printers automatically fills, click settings at the top right and then click on devices and printers.
  4. In the devices and printers folder right click on your HP Deskjet 2540 and left-click on properties of the printer
  5. Left click on the Advanced tab
  6. Left-click on new driver
  7. When the new driver window just press 'Next' until you see a list of manufacturers on the left and a list of Printers on the right.
  8. Select HP as the manufacturer on the left
  9. DeskJet 9800 select the printer on the right. If Deskjet 9800 is only select "Windows Update" at the bottom left and once the update has been completed, you will be able to select Deskjet 9800.
  10. After selecting Deskjet 9800 hit Next to complete the wizard driver new
  11. Under the printer properties window, select "Apply", but don't hit not OK
  12. Select the general tab
  13. Rename your printer in HP Deskjet 2540
  14. Click OK
  15. Finally, right click on your HP Deskjet 2540 one more time and left-click on Printing Preferences
  16. Left click on the paper/quality tab
  17. Left click on the drop down menu 'Normal' for quality printing at the bottom right and change its normal fast
  18. Press apply and OK

  Once the new driver is added, please test print to see if your problem is resolved.

  Please reply to this message with the result of your troubleshooting. I look forward to hear from you!

• HP deskjet 5150 - failure sudden print under Windows 7

  I've been running a printer HP Deskjet 5150 with Windows 7 for two years now without a problem (and for several years before in XP). Suddenly, it ceased to print from my desktop computer but continues to work away happily from my laptop (which is still running on XP).  When I select a file to print from office model, the printer comes to life (lights flashing etc.) but nothing is displayed. On the Control Panel, it says that it is there no ducuments in the queue.  I reloaded the driver etc. and used installation HP doctor, but all without result: none can detect defects.  But in trying different routes of troubleshooting, I find that the "Print test Page" function works as long as necessary the office, then it seems that nothing wrong with the printer functionally.   (But "print test page" in the installation of doctor HP is not working!)

  I saw only two error messages: once I got an error message that read something like "this program has encountered an error and is unable to act" and a second, some time later, said "cannot print scripts on this page.  They lead me to suspect that the problem lies somewhere with the Windows software.  The firewall in use is BitDefender, but disable this does not solve the problem.  Can anyone help?

  Sand Piper, to start sounds like it is a driver problem. I want to start to be sure that deleting the software and relocation happened in the best way possible. I want you to follow my steps, I can be sure that we start both on the same page.

   

• DeskJet 1050 - J410a: HP Deskjet 1050 does not print after upgrade of Windows 10

  Dear forum,

  I recently upgraded my HP Windows OS 8.1 for Windows 10 desktop computer. My deskjet 1050 printer, which worked fine before the upgrade, does not properly more print after the upgrade.

  I used HP Print and Scan Doctor several times, indicating no any problems. I am able to scan documents, the question is limited to printing. I also deleted and reinstalled the drivers at least 2 times (and restarted all systems on a regular basis).

  • A "test print" works very well.
  • When I print a PDF from the edge, the printer creates output but not good quality.
  • When I print an office word document, pages came out empty.

  3 cases have a common behavior, whenever I get an error message. "Morning maken puts printer niet mogelijk. Duch is for "cannot connect to the printer.".

  Do you have any tips for me?

  With sincere friendships.

  Pieter

  HeyPieter_Belgium

  Welcome to the HP Forums, I'd love to help you with printing problems you encounter. Although I am not sure what is cause of the error of communication, or of poor quality, I suspect it has something to with the pilot and the recent upgrade. I suggest to uninstall the software, remove the Chuck from the properties of the server, and then put it back using the printer Installation Wizard. I will list the links and instructions below to help you in each of these steps.

  HP printers - uninstalling the software of the printer (Windows)

  Remove the driver from the print server properties:

  1. in the folder "devices and printers".

  2. choose "print server properties.

  • Win XP - with no printer selected, click 'File' then 'server properties '.
  • Windows Vista - with no printer selected, press 'Alt' and then click 'file' then 'server properties '.
  • Windows 7/8, 8.1 and 10 -select any printer in the "Devices and printers" folder and click on "Print server properties" above.

  3. click on the "Drivers" tab at the top of the window "properties of the print server.

  4. choose the printer that you want to uninstall, and then click 'remove '.

  5. choose "Remove driver only.

  6. the next screen will give a warning, letting you know that the removal of the driver package will remove it from the system. Click 'Yes' to say are you sure you want to do.

  If documents are stuck in the spooler to print, you see an error, cancel all documents waiting in the print queue or try restart the spooler to print, and then try to delete the driver from 'Print server properties' again. If she will not always remove the sachet, restart the computer and the printer should correct this error "in use" and allow the driver to be removed.

  • If him you continue to get an "in use" message followed the steps in the document here. The specified printer driver is currently in use

  Download and run the Installation Wizard for printer: www.HP.com/go/Tools 

  If this solves the problem, please indicate your post as solved by clicking on the accept button Solution below. If you need help, let me know!

  Thank you.