HP Deskjet 5440: Jam 5440 printer

Similar Questions

• My HP Deskjet 5440 printer does not print anything, not even a test page. Done all the diagnostic tests.

  Even I did uninstall and reinstall with the disc that came with the PC. The last clue I found was in the HP diagnostic utility that said there was a "breakdown of pen" correction which had to be fixed before printing could continue. But he had no information about the way to approach this. The "Device status" box was red checked. When I try to print anything, it seems that receives the message from the computer to the printer, but then nothing happens and I get an error message and the printer goes offline by itself. What should I try?

  Hello

  What you can check is pulling the cartridges, clean the contacts on the cartridges and the unit (without of course) and check the dates on the cartridges if there not expired. Also try printing a testpage like this: press and hold the Power button, press once on the button back and letting the two buttons.

• Page HP Deskjet 5440 local status to align the printer

  I am running Vista on my HP system and just install the Deskjet 5440 printer. The problem is that I get a pop up to 'align' my printer. The "help" button on the pop - up does not work. " How can I get this pop-up window come unnecessarily?

  I want to thank everyone for their answers!  I don't have a solution to Support HP which I executed successfully.

  The issue may have been caused by an HP product entry remaining in the system by the start of systems services.

  Steps: 1 log on to the computer by using an account that has administrator rights.

  2. click on start, type msconfig.exe in the search box, and then press ENTER to start the System Configuration utility.

  3. a screen appears that says "System Configuration utility".

  4. at the top of the window, click on the "Startup" tab

  5. in this window, there will be a list of programs running, some will have a check mark, and others cannot.

  6 locate and uncheck all the entries associated with the HP programs, then down to click on the "Apply" button and then on the button 'Ok '.

  7 reboot the system.

  It worked for me!

  Yet once I appreciate the answer for everyone.

• Can't get the driver for 32-bit windows 7 HP DeskJet 5440 via windows update.

  Original title: driver HP DeskJet 5440 windows 7 32 bit

  I was unable to get the driver for 32-bit windows 7 HP DeskJet 5440 via windows update.  I also was unbale to find your compatibility Center.  Is there a link were I can down-load the driver directly from.

  Tony,

  In fact, I assumed that yours was always supported by HP * but I understand now that it's not [so I guess that it is more than 10 years because it is their general support period].  {* Mine is a DJ 2540 and is only a few years so I thought a 5440 DJ must be more recent}

  I see that HP gives you general instructions on installing drivers in http://support.hp.com/gb-en/product/hp-deskjet-5440-printer-series/445466/model/445467/document/c01796879/ I checked Microsoft update catalog service and nothing found for HP Deskjet 5440, that's why you're not having any success with the generic instructions, giving you these instructions seem to presuppose the existence of a Windows driver for this specific model.  {HP must have given up your specific model before that this catalogue has been compiled, because hardware manufacturers are those that connect to their drivers inside}

  However, my suggestions may solve your problem or maybe not.  They are simply the steps that seem more likely to be successful.  Personally, I'd a system image before you try each of these suggestions so that you can go back to square one if something goes terribly wrong.

  Suggestion 1 - go to the devices & Printers dialog box, click Add a printer, select HP then select HP Deskjet 5400 series [the sequence in the list is awkward, this entry is about 10% of the way to the bottom of the list], click on Next and follow the procedure of menus at its conclusion.  Even if it's completely successful, plan to run my Suggestion 4 below as well in case of future need.

  Suggestion 2 - out whatever the driver that shipped with your printer in the first place, try to install in compatibility mode [right click on its executable, click on the tab compatibility , the value of the check box for run this program in compatibility mode for... and select a BONE the printer worked correctly with.]  Then go to the executable, right-click and select run as administrator.  This idea is not frivolous, until he blew something internally, I was using my 1999/2000 HP Deskjet 1220C successfully on Windows 7 x 64 for four years [despite the HP user forums which implies that this was not possible].

  Suggestion 3 - go back to the HP site to http://support.hp.com/gb-en/drivers/selfservice/hp-deskjet-5440-printer-series/445466/model/445467 but select 10 Windows as your operating system.  In the results, the Diagnostics Utility Tools point contains now a setup generic [hppiw.exe] who described "HP for Windows printer setup wizard was created to help users Windows 10 download and install the software solution most appropriate for their printer and newer HP HP Windows 7 and Windows 8/8.1.   Simply run the tool and follow the on-screen instructions. " Download & run [run as Admin] of this file.

  Suggestion 4 - Connect to an Admin-level account first, then, using IE [there than IE], date back to the Microsoft update service catalog and search for HP Deskjet 5400 series.  It will give a lot of results, then click on the driver name in the left column of title to see details for each potential choice [especially if it is 32 or 64 bit].  The top of the list is [32-bit] Microsoft Update for HP Deskjet 5400 Series driver dated June 21, 2006.  [You might also download & file the second element, the 64-bit version, just in case you change computers in the future]  Add the chosen driver [s] to the "trash" then download - you will be asked to select a file to download first {it is at this stage that the process would be a break without further explanation or any error if you had not been connected to an Admin-level account before launching IE}.  I think that these drivers also work with Windows 10 thus, in the hope that your printer works for the years to come, it would be well worth your copies of maintenance of them filed there ready for your next computer use.

  Proposal 5 - go [back] to the forums of user HP Deskjets & find 5440.  See if any of the other suggestions can help you - unless you have already looked through them all the more relevant [I realize that you have been here once already as one of the threads that I just watched was of you].

  We know, in advance, which of these suggestions will lead to the best possible solution.  So please come back to this forum to explain what happened when you tried the.  Your experiences will benefit all users of HP Deskjet 5440 who come here looking for advice.

  Good luck

• HP deskjet 5440 does not print images in a word document

  HP deskjet 5440 does not print images in a word document. Using Windows 7 Ultimate 32 bit.

  No problem.

• DESKJET 5440: DESKJET 5440 ' TRANSPORT IS AT THE POINT OF DEATH.

  HELP MUCH APPRECIATED - DESKJET 5440, s/n [Personal information deleted], an old but goody with no problems until now, when I get a computer message saying "TRANSPORT UNHOOKED". He's stuck on the right when it is plugged. Carriage does not move to the left after pushing it with power on. It goes to the left without power.  Change rear wiper is in the correct position as shown on the help page.  I've done all the troubleshooting listed in message as unplugged all waited and reconnected directly into the wall. I reinstalled ink cartridges, there is nothing that I can see blocking. I looked for hair, fuzz, lint, etc. and deleted the accumulation of extra ink, still no will. No one in town will even watch this printer because of his age

  CAN ANYONE SOLVE THIS PUZZLE? I LOVE THIS PRINTER.

  Hello @Curly-Q,.

  Welcome to the Forums of HP Support!

  I understand that you are having a Jam of transport on your HP Deskjet 5440 Photo printer. I see that you have completed all the troubleshooting steps found here on the HP site for this hardware problem. Normally this problem is caused by the plate change wiper being positioned properly; However, you indicate that the passage of the rear wiper is in the correct position. Thank you very much for this, including in your original post.

  I checked in a potential for programming Firmware update, because this problem can also be caused by a problem of programming in your printer. However, due to the age of this product, no such Firmware updates are available.

  The only step left would be to replace the entire product. I highly recommend that you contact our Technical Support telephone queue for discover hardware replacement options. Due to the age of your printer you pouvez be able to upgrade this old Deskjet model to the new version of the printer at a reduced price.

  HP Technical Support can be reached at the: 800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  I wish you good luck going forward with this!

• And clearing memory all-in-one HP Deskjet 5440 and Officejet 7310xi

  How to erase the memory of the printer on a HP Deskjet 5440 and an Officejet 7310xi before recycling?

  dgilchri wrote: How do I clear the memory of the printer on a HP Deskjet 5440 and an Officejet 7310xi before recycling?

  Hi dgilchri, when you unplug the power cord on the printers, all memory stored in the printers are refreshed (disabled).

• DeskJet 4625: 'Jam ADF 4625.

  The automatic document feeder on my all-in-one Deskjet 4625 jams, and I don't see any video appropriate indicating how to erase it.

  Can someone please send me a link to a video appropriate? Thank you

  Hello @YaakovK,

  Thank you for visiting the Forums from the HP Support! I see the ADF on your HP Deskjet Ink Advantage 4625 jams.

  "" "I would like to you to begin troubleshooting here: "Traffic Jam,"' 0 x 61000008 ', ' 0x6100000B ', or ' 0x6100001D ' message for HP Officejet 4610 all-in-one, 4620 Officejet, Deskjet Ink Advantage 4610 and Deskjet Ink Advantage 4620 e - all-in - One Printer Series

  You'll see a helpful video. Please let me know the results.

  I'll watch for your reply.

• Deskjet 3650 will not print

  I have a deskjet 3650 who quit printing. When a test message or the print job is sent to the printer it trys to print the carriage moves back and makes noises like it wants to print but the mechanism does not pick up and the paper. I completed the process of paper jam and downloaded the diagnostic program that shows no problem. Any ideas?

  Thank you

  RLB

  Hi Ciara_B thank you for your response. Unfortunately I did not check "email me when someone replies so I missed it. Finally, I bought a new HP5520. Kind regards.

• Deskjet F350 all in one printer: deskjet F350 does not print

  The printer will print after replacing more paper in the middle of a print job. Checked for paper jam and it is clear.

  No error message flashing.

  @karlsruhe57, welcome to the forums!

  I read on how your Deskjet F350 will not print once you have replaced most paper during a print job. What comes to mind, is that the printer can think it's even more paper.

  Try to reset the printer and restart the computer and try again to print.

  Reset instructions:

  • Press the power button to turn the product on.
  • With the product, unplug the power cord from the back of the product.
  • Unplug the power cord from the wall outlet.
  • Wait at least 15 seconds.
  • Plug the power cord into the wall outlet.
  • Reconnect the power cord to the back of the product.
  • If the product does not light by itself, press the Power button to turn it on.

  Let me know what happens!

• power light flashing hp deskjet 3940, & do not print anything

  I have windows XP(SP3) on my laptop and HP printer Deskjet 3940. The printer worked fine until now. Now the power light blinks on the printer. There is NO paper jam.
  I uninstalled and reinstalled the driver from HP website. The printer showed ready in the control panel,but as soon as i try to print a document it shows offline and the power light starts blinking. I have cleared documents from the print queue.
  I have tried using different USB ports but no success.
  I have ensured that 'use printer offline" is unchecked.
  I also downloaded and ran HP Print and Scan doctor. It says everything is fine and asked me to print a test page, but nothing happened when I tried to print. Print HP EXPERTS, Please Help! Thank you!
  

  Hi HPuserSJ,

  I just wanted to check to see if the documents of resolution of problems you have been useful.

• HP DESKJET INK ADVANTAGE 1515: To connect the HP DESKJET INK ADVANTAGE 1515 printer device to multiple computers.

  Mr President, I have HP DESKJET INK ADVANTAGE 1515 PRINTER I want to connect to my two computers with all FIRST Windows XP and the second having Windows 7 operating systems. Kindly help me to do this in detail...  THANKS IN ADVANCE

  What's your plan for the connection?   It is a USB printer only, no network connection.  You can connect to a computer and then enable Microsoft File and print sharing on both computers.   Or if your router has a USB port that supports printers CAN operate when connected there.

  Those are your options.

• HP Deskjet 1112: HP Deskjet 1112 does not print

  Recently, I bought a HP Deskjet 1112. It prints very irregular and I can't seem to understand the problem.
  
  Here's what I've tried so far:
  
  (1) turning and turn on the printer
  (2) turn the system off and on again spooler (using Windows + R, typing in services.msc, turn off the spooler, then by disabling the that and turn it back on)
  (3) uninstall and reinstall the software (this is what the printer Troubleshooter told me to do)
  
  The convenience store told me that is missing a driver, and he also says that the printer and the computer communicate well. I wonder if it is a question of rope? In addition, I do not know what a driver is so I don't know how to check if it is operational.
  
  Help, please. I'm running out of ideas for now thanks in advance!

  Hello @humblebee,

  Thank you for showing your interest in the HP Forums! I see you have printing problems constantly. I would like to help.

  Try the following steps to see if they will solve this problem: printer is offline (Windows).

  If you still have trouble, let me know the results of printing and scanning doctor.

  I would like to know if these measures worked for you. If they did, it's great! Give us some reinforcements by clicking on the solution and laurels, buttons that help and others see that we have the answers! Good luck!

• DeskJet 3520: Unable to print the map of wedding stationery

  I have a card that appears to be too thick - it sticks in early printing, then moves along and print the rest of sheet well. The card is sold as 'wedding stationery' and is thicker than the card I normally use. Should which option I use to print on this map?

  Thank you

  @Djinnie

  Printer:

  E-all-in-one printers HP Deskjet 3520

  The printer specificationsincludes a list of the weight allowed for various documents:

  Status bar	Type	Weight	Capacity (depending on the weight of the paper)
  Feeder	Paper	64 to 90 g/m² (16 to 24 lb)	Up to 80 sheets
  Envelopes	75 to 90 g/m² (20 to 24 lb)	Up to 5
  Index cards	Up to 200 g/m² (110 lb index maximum)	Up to 20 or 40
  Photo paper	Up to 280 g/m² (75 lb)	Up to 30
  Output tray	Paper	n/a	Up to 15
  Envelopes	Up to 5
  Index cards	Up to 10
  Photo paper	Up to 10

  "Medium stock paper / card.

  Look for a setting in the printing preferences for the type of media "brochure", thick, or similar paper.

  "Very heavy weight paper / card stock.

  You might be able to fool the parameter defining the type of support to some kind of Photo paper - this media (paper kind) allows a weight up to 75 lbs/280 g/m.

  Reference:

  Printing options

  Comment

  In my opinion, unless you want to print the notice yourself for some reason, this might be the time to look for a local printing Service company that can help by printing the invitations for you with your special message / staff.

  You can provide the staff of print service with a sample of your message that is printed on plain paper.  This way you are not tempted and then perhaps overwhelmed with choices that may be other than what you have already decided.

  Why use a printing Service?

  • This printer also beautiful be, isn't able to print invitations from the way you expect.
  • The invitations are likely to be expensive and perhaps not easily replaceable.
  • The test phase may exceed the number of invitations you want to risk.

  If you do, you could remove this in your list of items "I do" and entrusts the care professionals.

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• all-in-one Deskjet 1515: do not print from MS word

  My printer prints not MS word.it prints from all other programs except for ms word. Ive tried everything I could think, suggestions

  Hey @mangee,

  Welcome to the Forums of HP Support!

  I would like to help you today to solve the printing problem of Microsoft Word that you encounter when you try to print from your computer Windows 8.1 for the printer all-in-one HP Deskjet Ink Advantage 1515. Because you are able to print from all programs except one, I don't think that what you feel is a conflict driver on your computer Windows 8.1. To resolve this conflict, can I please have you perform the following steps.

  How to add another driver:

  1. Open your screen to Start by clicking the windows button in the lower left corner of your computer screen or by selecting the "Windows" button in the bottom left of your keyboard to the left of the Ctrl key
  2. In the screen type start "devices and printers
  3. If the option devices and printers automatically fills, click settings at the top right and then click on devices and printers.
  4. In the devices and printers folder right click on your HP Deskjet Ink Advantage 1515 and left click on printer properties
  5. Left click on the Advanced tab
  6. Left-click on new driver
  7. When the new driver window just press 'Next' until you see a list of manufacturers on the left and a list of Printers on the right.
  8. Select HP as the manufacturer on the left
  9. DeskJet 9800 select the printer on the right. If Deskjet 9800 does appear to only select "Windows Update" at the bottom left and once the update is completed, you will be able to select Deskjet 9800.
  10. After selecting Deskjet 9800 hit Next to complete the wizard driver new
  11. Under the printer properties window, select "Apply", but don't hit not OK
  12. Select the general tab
  13. Rename your printer HP Deskjet Ink Advantage 1515 at
  14. Click OK
  15. Finally, right click on your HP Deskjet Ink Advantage 1515 one more time and click on Printing Preferences
  16. Left click on the paper/quality tab
  17. Left click on the drop down menu 'Normal' for quality printing at the bottom right and change its normal fast
  18. Press apply and OK

  Now that the other pilot is successfully added to, please try to print the new Word.

  Please reply to this message with the result of your troubleshooting. I look forward to hear from you!

• HP Deskjet Ink Advantage 4515: print jobs automatically cancel middle of print printer HP Deskjet Ink Advantage of 4515

  Hello

  Recently I bought the HP Deskjet Ink Advantage 4515 e-all-in-one printer and installed this printer wireless, operating system is 64-bit Windows 8, but question current side in print documents.

  When I give print for black & white command it printed perfectly, but when I give a command for printing, paper color as (color photos) it cancels the middle of printing automatically print job and produce the half printed paper.

  Please help me solve this problem.

  Thanks in advance

  Kind regards

  Rahul Thakur

  Hello Rahul,

  Try following these steps instead and check if this may help:
  -Open the HP software clicking on the HP Deskjet 4510 icon in the desktop or the Start Menu, and then click the link to the Home Page of the printer (EWS).
  -Click on the network tab.
  -According to the model of your printer, click Network, click Network (IP) address or click IPv4 in the active network connection type.
  -Manuel IP-click and then click on suggest a manual IP address. An IP address manually, the subnet mask and default gateway shows.
  * Be sure to take note of the IP address and confirm the changes, and then close the EWS page.
  -Click the HP Deskjet 4510 icon on the desktop or the Start Menu and click the utilities tab, and then click Update IP address.
  -Type the IP address that is configured manually, click on save and confirm.
  -Open the control panel and go to devices and printers.
  -Right click the HP Deskjet 4510, then select printer properties.
  -Open the Ports tab.
  -Click on the button Add Port, select Standard TCP/IP and click New Port.
  -Follow the procedure by typing the IP address that is configured manually and confirm the changes.

  Now try printing and check if the problem solved.

  Kind regards
  Shlomi