USB ports do not support iTunes synchronization.

Similar Questions

• X120e - yellow USB port does not support suspend or Hibernate

  I have two options enabled in the BIOS, but the yellow charge USB port when the laptop is awake.  I use the latest BIOS and drivers.  Does anyone else have this problem?

  It is enabled in power manager. I just read the help dialog here and it does not mention that it will only charge when connected via AC what kind of defeats the purpose for me. I was hoping I could recharge my phone off of the battery of the x120e, while he was in hibernation.

  I guess that "always on USB" isn't exactly "Always on" Oh well

• HP Pavilion P2-1140 does not have a way to connect to a Firewire port and USB transfer is not supported by Windows 7 to connect the Sony HC20 Handycam.

  Original title: Sony Hanycam HC20

  I just bought a HP Pavilion P2 - 1140 W7 64 bit and may not know how to download video from my Sony Handycam HC-20 who

  using a Firewire connection. P2-1140 does not have a way to connect to a Firewire port and USB transfer is not supported by Windows 7.

  I looked in the spec of my card mother HP and there is no additional slots to add adapters, no PCI, PCI-e or anything that looks like

  as if you can add anything. I know that the Firewire to USB converters cable do NOT work, any suggestions please

  There are USB firewire converters, but I think it will be a situation of hit or miss--they are unable to work or perform very well.

  The only option I can think of that would work would be to use AV out on the camera and a USB capture card that records on the computer.
  You can also consider going back to the computer and get a different model that is built in firewire support or at least an extension connector in order to get an expansion card.

• MacBook Pro 13 "Retina Display Usb Port does not... !!

  MacBook Pro 13 "Retina Display right usb port does not... I tried to plug in and out still it doesn't then I rebooted my macbook and again inserted the USB, it worked... !! Why this problem is caused? today is the 5th day since I bought my macbook... !! Also last night so he was working in final cut pro that freezes... the keys of my keyboard and trackpad it works do not totally got hung up... and then I pressed my power button after the restart, it was ok... Parachuting also does not work between my iphone and a macbook... say Bluetooth not connected to my phone eventhough after pairing... suggestions and advice? Help me please I am confused and worried... !! It's just the 5th day... !!

  Reset the SMC > reset the management system (SCM) controller on your Mac - Apple Support

• HP 15-r002se: USB port does not

  I have a problem with my laptop [HP 15-r002se] all three 3 usb ports do not work, or even detect that something is plugged, I tried techniques to conquer the problem by the system of formatting and reinstalling windows 8 32-bit where I found myself without success, because I can't able to get compatible drivers of troubleshooting. Then I go to the usb ports even on windows 7 64 bit does not. and finally, format and install windows 10 64-bit, I downloaded the drivers from hp website, but unfortunately when I run the downloaded software sometimes nothing appears either to the pop-up a message on the error or continuation and sometimes it shows this kind of error after it finished extracting

  

  Finally with the help of pilots pack that I managed to install all required drivers but finally arrived with NO SUCCESS, yet neither the operation of the usb port. Here is the screenshot of my device manager.

  

  Please, I seriously need your help to solve this problem, because I am a student, I can afford to buy another laptop earlier

  Hi @Mustapha_Musa,

  I read your message and please try the following steps. A brilliant work has been done by trying these steps. Kudos to you on this point. It's a problem of clear material with the device. The USB ports are defective, the motherboard should be replaced. you will need to contact HP telephone support on this subject for the machine.

  HP technical support are available by clicking on the following link:
  
  http://h22207.www2.HP.com/us-en/?openCLC=true
  
  (1) once the page opens, please select the country in which you are located. Then enter your model of HP on the right number.
  
  (2) then choose "Contact the Support" tab at the top and scroll to the bottom of the page "HP Support - contact" to fill out the form with your details.
  
  (3) Once finished, click the "Show Options" at the bottom right.
  
  (4) Finally, scroll to the bottom of the page and select "Get a phone number." A file number and telephone number will now fill for you.

  The workaround, for now, is the following: If you have a USB port on the device that works, then you could buy a USB port extender and connect it to the port good work.

  Then you connect other devices to the USB port extender. This way multiple devices may still be connected to the computer.

  Just to say thank youPlease click the ' Thumbs Up 'button to appreciate my efforts. If it helps, Please mark this "accepted Solution".

  Thank you and have a great week ahead.

• USB ports do not work after waking up Satellite A200 from sleep mode

  After that I spend my Satellite A200-244 "sleep" or "hibernate" USB ports do not work!

  Hi mate,

  already tried this:

  Open start and type Device Manager and then press ENTER, to start Device Manager. Click on the sign + next to "Controllers of Bus USB" and then in the list, you should see some devices called 'USB hub root'. For each one, click right, hit properties, go to the power management tab and uncheck the box "Allow the computer to turn off this device to save power." Then restart.

  Maybe it works. Another solution would probably be this Microsoft KB document:

  http://support.Microsoft.com/?scid=kb%3ben-us%3B812946&x=8&y=9

  Greetings

• By selecting USB port is not available in the Installation Wizard of Pinter in XP - 2.

  By selecting USB port is not available in the wizard Installation of Pinter.
  Tried editing the registry and found local-edit string - data value = localspl.dll. "what is normal. Reset once more.
  Resolution not yet found.

  Hello

  1 is your other USB devices work well?
  2. What is the brand and model of the computer?
  3. What is the brand and model of the printer?
  4. who is the Service Pack installed on your computer?

  Method 1:

  Advanced troubleshooting tips for General USB for Windows XP problems: http://support.microsoft.com/kb/310575

  Note: If you have Service pack 2 on your computer, and then try to install Service pack 3 and check if it helps.

  http://www.Microsoft.com/download/en/details.aspx?ID=10767

  Method 2:

  Remove and reinstall all USB controllers.

  To remove and reinstall all USB controllers, follow these steps:

  (a) click Start, run, type sysdm.cpl in the Open box, and then click OK.
  (b) click on the Hardware tab.
  (c) click the Device Manager button.
  (d) expand Bus USB controllers.
  (e) right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  (f) restart the computer and reinstall the USB controllers.

  Plug in the removable USB storage device and perform a test to ensure that the problem is solved

  See also:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/print_c_portsw.mspx?mfr=true

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/sag_setup_indirect_printer.mspx?mfr=true

  http://support.Microsoft.com/kb/282842

• Vista - usb ports are not recognized unknown device

  Vista - usb ports are not recognized unknown device. any usb device it appears unknown. all worked a few days hardly, but after that I connected my Kodak camera - which does not, now, nothing works. Any help would be appreciated.

  Hello

  Thank you for using the Microsoft Windows Vista Forums.

  Follow the instructions below that may help you resolve the issue.

  Method 1:

  Try to connect USB devices to a different USB port and check if you are able to access.

  Method 2:

  Click on the link below to run Fix it which will help you to solve the problem.

  Tips for solving problems of USB devices

  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx

  Click on the link below and install the update.

  Rollup cumulative update for USB in Windows Vista Basic components

  http://support.Microsoft.com/kb/941600

  Try to connect the camcorder to the other USB port and on the other computer and see if the problem is resolved.

  Method 3:

  Let us try to disable the Antivirus security software and check the number.

  Re-enable the security software after checking the issue.

  You can also try disabling the firewall and check the issue.

  Re-enable the firewall after checking the issue.

  Method 4:

  A clean boot helps eliminate software conflicts.  Let us check if software is causing the problem by following the clean boot procedure.

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot

  Step 2: Enable half the services

  Step 3: Determine whether the problem returns

  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns

  Step 6: Resolve the problem

  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista

  http://support.Microsoft.com/kb/929135

  After checking the problem, turn the computer back to the Normal mode.

  Uninstall or update the program that is causing the problem.

  Check whether the problem is resolved.

  You can also check out the link below.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/6be4581d-8fbd-407F-815E-b475c35ca586

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• USB driver is not support for HP Deskjet 1050 j410a.

  My HP Deskjet 1050 j410a is installed on a windows 7 and show a code 37 error message which means usb driver is not supported. I had reinstalled so many times and also restarted the pc but the problem does not resolve itself. kindly help me to solve this problem.

  Hello

  Make sure you first upgrade the driver by uninstalling the HP software and install the latest version below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-109412-2&cc=us&DLC=en&LC=en&OS=4062&product=4027465&sw_lang=

  If the same continues to try to plug the USB key into a different port on the PC and check any change.

  Then try another device (for example, the disk on the key) and check if you can see a similar behavior, if so the problem may be with your PC Chipset problem.

  If the issue appears only on the Deskjet 1050 and no step has not resolve the problem, try an another USB cable from the printer and check any change.

  Shlomi

• The USB Ports does not.

  I was wondering if someone could help me on this issue. For some reason, some usb ports do not work on my computer.  The model I have is a HP m9077c with the Windows Vista 32-bit operating system.  the m9077c model has usb ports, four in the back and two up front. The four in the back work well, but the two front won't work.  There are also three other usb ports on my monitor, HP w2408, but these do not work either. What makes really fiddly to use all the material that I currently use on it. Can anyone help? Thanks for your time.

  Hello

  Download and run the Fixit diagnostic tool from the link below and check if this solves the problem.

  
  Tips for solving problems of USB devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• My USB ports do not work.

  Hello
  Yesterday, I bought a brand new printer, implemented, it was working fine, and then it just stopped. So I fought a bit with her, decided the printer was defective and would resume and put it out to a new, and meanwhile put my printing task on my jump drive and bring it to our local printing store. However, when I put my jumpdrive into the USB port to transfer the project, my computer would not my USB - stick. So now, I think that for some reason that my USB ports are not working. Why is this happening and how to fix it?

  Hello

  1 reboot to be sure nothing blocks the ports.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel - Device Manager - click in the box of white/white - VIEW - show hidden devices

  Look everywhere EXCEPT USB controllers for your device and if find you them (maybe
  plus_d' one of each) under disk drives, you can have several - right CLICK and UNINSTALL
  for all instances

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• My USB ports do not work after that I updated. I discovered that they were not working because my mouse no longer works

  My USB ports are not working after I upgraded to don't know what could have caused this and there is no fix auto feature that opens, I discovered that they were not working because my mouse no longer works HELP Please

  Original title: hardware device

  Hello Neale,

  Two things for you to try: http://support.microsoft.com/mats/Windows_USB_diagnostics and if that does not work, try this one: http://support.microsoft.com/mats/hardware_device_problems/ .

  Let me know if one of them might be your problem.

  Kind regards

  BearPup

• When you run XP mode USB ports will not accept XP drivers or if they remain Windows 7? Should I really go to a Dual Boot System?

  I am running Windows 7 Professional.  I have a piece of equipment that has only Windows XP drivers, I desperately need to work.  I read up on top of the virtual systems and XP mode.

  When you run XP mode USB ports will not accept XP drivers or if they remain Windows 7? Should I really go to a Dual Boot System?

  Thank you

  Andrew

  You must attach the USB device to Virtual PC XP Mode: http://support.microsoft.com/kb/824369

• I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

  I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

  Wake the computer to your Apple store or Apple authorized service for the service provider. He probably suffered a hardware failure.

• EliteDesk 800 G1 USDT: usb ports do not provide enough power

  We have a scanner usb requiring 500mA of power.  However, for many of our clients using HPs, the usb ports do not provide enough power to the scanner causing the application to crash.  Some customers use the HP EliteDesk 800 G1 USDT, others use HP zero client t310.  Connect the scanner to a usb hub powered solves the problem every time.

  Y at - it changes, they can do for the Bus USB controllers to ensure that a particular port will be able to provide 500mA so they did not need to buy a usb powered a system hub?  Or do you have another suggestion?

  Thanks in advance.

  I'm not familiar witht eh models accurate but 500MA is the output for USB 2.0 max but 3.0 can go higher have you tried usingn 3.0 ports if not you can also get a cable Hat uses the power of 2 ports.  Many systems have problems with the only Scanners USB and power supply.