HP Envy 17-3270NR: micro - HP Envy 17-3270NR

Similar Questions

• No sound on my Envy 17-3270NR

  My audio just stopped working on my HP Envy 17-3270NR.  I tried everything and nothing makes his return. I checked the speakers in the Panel and it shows that they are working.  Shows OK.  I looked at the obvious things like the Sound Off button next to the dial of Beats Audio and that nothing is plugged into the plug headphones.  Other than these things, is there anything on the keyboard that turns off the sound?  No diagnosis, can I try?  I am at a loss.  I just hope this isn't something obvious.  I don't have the external speakers and nothing extraordinary.  I am running Windows 7 64 bit.  Thank you. Derek

  Hi Derek,.

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56900.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  If you see a very similar entry for (or entry of IDT) IDT HD Audio , right click on the device and select uninstall - you should also get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.  If there is no input IDT, go just below.

  When you are finished, download and reinstall the Chipset driver from the link below.

  Chipset Driver - Windows 7.

  When reinstalling, shut down the laptop.  Disconnect the adapter, then hold the power button / stop and button beats for 10 seconds.  Plug the power adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• help with the beats on my envy 17-3270nr, n key

  help with the beats on my envy 17-3270nr key. recent Smart hard disk crash, replaced with exact same hitachi drive, same care extended warranty repairs covered of the Frys. Windows 7 Edition home premium w / service PAC 1 installed, drivers installed, except that now there is no volume of beats on screen graphic dial button, click the button on top button on the page does not call the beat of the application settings. Futhermore; the motion sensors of laser to activate the keyboard backlit keyboard do not work.  Are there drivers hp software to enable the missing features?

  Hello

  Download and install the following.

  HP OSD utility.

  Proximity sensor driver.

  Once completed, restart the laptop.

  Kind regards

  DP - K

• Envy 17 3270NR: Envy 3270NR - mouse problems

  Help, please!

  the touchpad on my envy 17 is so imprecise / jumpy.  I can move the pointer in the right place, but when I click on the mouse button it jumps off the side and selects something else.

  This problem can be resolved via a patch or what I need to replace the touch pad?

  I think you missed a step between step 4 and 5, you will need to press the ESC key before you can press f10.

  Except that there was an improvement, thank you

• 3270nr HP Envy, random BSOD

  I bought it a few months ago the beginning of the year, it worked great, was able to leave it on for a few days with no problems at all, but this week he started getting random BSOD, I did a test of stress with the CPU, was 100% usage for 20 minutes or so, do not go beyond 80 degrees (Celsius) and has not either the BSOD at first I thought it was steam associated, but this morning I left it on just to charge my phone with nothing open and he got a BSOD I think, because it shows the same image sometimes watch after BSOD, saying: there is no OS installed, I did not format after purchase, or made changes on the hardware all I use is a USB mouse. The attachment is the image which shows sometimes after the BSOD, but other times he just asking if I want to start Windows normally, with the network, or safe mode. It works very well after that I have press and hold the power button to force it to stop and restart. At the hope of solving this problem here before trying to exchange it for another or something.

  Hello

  If the hard drive test failed there is a hard drive problem and must be replaced. If your laptop is still under warranty, then you can call the HP technical support to get it replaced.

  HP Notebook PC - test a hard drive by using the Built in Self Test c00439024

• 3270NR HP Envy 17 - not in the market of the UAE UNITED for the purchase of

  I would buy it but this product not available in the UNITED Arab Emirates...

  Screen size 17.3 inches Max screen resolution 1920 x 1080 pixels processor 2.3 GHz Core i7-3610QM RAM 8 GB SDRAM Hard Drive 750 GB Graphics coprocessor AMD Radeon HD 7850 M Graphics Card Ram size 1024 MB Wireless Type 802.11bgn number of USB 3.0 Ports 4 battery lifetime (in hours) 7 hours

  Try this link http://goo.gl/KiYTW

  It is suitable for laptops available in your area.

  Please let me know if it helps!

• How will I know if my HP Envy 17-3270nr has a Radiance monitor/display?

  I need to know if it's a BrightView or screen 17 "HD of Radiance. Thank you.

  Hello

  The brightness panel cable to the system board wouldn't work for another type (for example, BrightView) of the display panel.

  Kind regards

  DP - K

• HP ENVY 17-3270nr (problem of graphics)

  Hello

  I performed a clean installation of Windows 8 and downloaded the latest drivers from the HP site. My problem with my video card is that the light DOES NOT WORK! Is there any fix to this yet? I tried to use the Intel and Ati drivers from the site, but it doesn't seem to work. Using Windows controls in the control panel / power options also DOES NOT WORK!

  When this gets fixed?

  I found the answer to my problem, it's a registry error, and it should be fixed by HP or Ati soon I think.

  http://adrynalyne.blogspot.com/2012/10/Fix-brightness-control-for-Windows-8.html

  Thank you!

• HP Envy 17 3270nr, Windows 7 64 bit, I can't turn it on

  My new pc is been giving problems as I opened the box, first after turning the pc on the mode "sleep" I can't wake up to the top of back, the only way is by pressing the power button / til stop and press again, however now I was plannig to connect myself to the internet to check on the issue and asked me for the (apparently cannot connect wireless) Ethernet cable so I shut it down to see if the problem resolves, by chance I press control button audio beats and now the pc is dead, can not even turn on, please can someone help me.

  Hello

  Please find the links below might help you solve your problems on your device.

  How to solve a problem when a computer starts not upward or start properly

   

   

  The problems of sleep and hibernation

   

  Problem with Wi - Fi

   

  (1) unplug the battery adaptor & then press on & press and hold the power button for laptop for 30 seconds then switch on and check if the wireless led lights.

  (2) go to Device Manager then uninstall the drivers wireless network card and restart the device and check if the light is on.

  (3) try to do a system restore to the date where unit was working fine.

  (4) Please update the Bios driver & wireless from the HP website.

  (5) click on start search type Recovery Manager, and then click on it once select Yes on user access control, and then select I need immediate help and then select driver and select request recovery driver wireless and install it and then restart the device.

  (6) If you are comfortable with reinstalling the wireless card that will be on the rear panel of your device you can try this steps as well.

   

• HP Envy 700 406 PC: windows 7 drivers for hp envy 700 x 64

  I bought a PC HP Envy 700 406 which had originally windows 8.1 on it, but due to problems of compatibility to work, I had this downgrade to Windows 7 Ultimate 64-bit.  Now I have to get all the drivers to make these computers run smoothly again, but the Internet HP site has only the drivers listed for Windows 8.1 for this PC.  Can someone tell me where to find the drivers I need?

  Hello

  AMD SMBUS driver

  http://ftp.HP.com/pub/SoftPaq/sp65501-66000/sp65990.exe

  Driver USB 3.0 AMD

  http://ftp.HP.com/pub/SoftPaq/sp69501-70000/sp69719.exe

  CODEC Audio of IDT high definition (HD)

  http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67081.exe

  Alcor Micro USB driver card reader

  http://ftp.HP.com/pub/SoftPaq/sp69501-70000/sp69823.exe

  AMD graphics driver

  http://ftp.HP.com/pub/SoftPaq/sp69501-70000/sp69692.exe

  RF remote control for viewing slide show and eject pilot

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66396.exe

  Controller Realtek network driver

  http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67085.exe

  Driver LAN wireless Broadcom

  http://ftp.HP.com/pub/SoftPaq/sp69501-70000/sp69679.exe

  Driver Bluetooth Broadcom 2070/20702

  http://ftp.HP.com/pub/SoftPaq/sp69501-70000/sp69680.exe

• ENVY 15-j054ca: Microphone sofware

  Hello

  I had to update my laptop, I have now, I'll have to redownload all the software. I need micro softare, but I don't find it for my production. Can someone help me, please?

  Thank you

  It will be the audio driver.

  Download link: http://ftp.hp.com/pub/softpaq/sp63501-64000/sp63555.exe

  All drivers: http://support.hp.com/us-en/drivers/selfservice/HP-ENVY-15-Notebook-PC-series/5354982/model/6488531

  You could also install HP support assistant to update all the drivers on the PC.

  Link: http://ftp.hp.com/pub/softpaq/sp68001-68500/sp68201.exe

• Laptop HP Envy m6: wddm1.2 graphics adapter

  Hello.  I'm updating of Advanced Micro Devices, Inc.-Graphics Adapter WDDM1.2 - AMD Radeon HD 7660 G in my systems update. It continuous indicates failed. I need to update this software to update my Netflix app because my Netflix app will not update as well as a few other applications. Please let me know how to fix my laptop for this update. I tried the troubleshooter and everything has been fixed, so I don't understand why this update will come not through. Thank you.

  Hi @sonyakim0701,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question on your HP ENVY m6 Sleekbook and issues with the graphics. I uninstall the graphics drivers in Device Manager, reboot the laptop. What do you see here? Try to update the driver of 7660 G AMD Radeon HD.

  I'd be happy to help you if necessary because there are many models of HP laptops, I would need the model number.
  How can I find my model number or product number?
  
  Please let me know.
  
  Thank you.

• HP Envy 17-j184na 2nd HARD drive installed

  Hello

  I just bought a HP Envy 17 - j184na laptop and I do not want to install a 2nd HARD drive on the 2nd drive bay HARD inside, but there is no secure shell SATA cable for this caddy.

  Where I would be able to buy this rubberized HARD drive [blue] shell-protection and water SATA to connect my 2nd HARD drive.

  Thank you in advance.

  Glenn [UK]

  Hello
  
  Through page 22 or 25 of the manual - http://h10032.www1.hp.com/ctg/Manual/c04091762.pdf
  
  Part of HP for hard drive kit number is 720237-001
  
  http://PartSurfer.HP.com/search.aspx?SearchText=720237-001
  
  http://www.Amazon.com/GP/AW/d/B00G2FZ714?pc_redir=1408084113 & robot_redir = 1

  Find the components of the hardware kit sold separately:
  
  The part number for the 2nd drive hard micro sata cable is: 723421-001:
  http://www.Amazon.co.UK/GP/AW/d/B00DSJ1K8G/ref=redir_mdp_mobile
  
  The part number for the caddy metal/rubber is: 723419-001:
  http://www.Amazon.co.UK/GP/AW/d/B00DSJ1L1W/ref=redir_mdp_mobile
  
  Kind regards

• Boot from the second disk to the Envy 17

  I just installed a second HARD drive in my new Envy 17 3270nr (hybrid). Since this new drive HARD is supposed to be faster than the original one, I want to have this new as my main drive (disk 0) and boot from it. I cloned the HARD original (disk 0) on the new disc (disc 1) and everything looks OK, when I open the Disk Manager, but in the configuration of the BIOS, it seems that I can't choose between disc to boot from, I can only switch between other external or internal devices boot order and internal hard drive. Would be very grateful for your advice!

  It's real simple... you can't boot from a drive in the second. Without them.

• HP ENVY h8-1409: Moving H8 WANT h8-1409 motherboard in a custom box

  Hi, I was wondering if there was problems of displacement, the motherboard (Pegatron/Formosa) from a computer ENVY H8 h8-1409 in any standard average Tower ATX case such as a NZXT S340? I heard some HP motherboards do not allow for the removal, or if they are able to be removed, they are not compatible with any standard cases out there.

  It is a micro ATX form factor, which means that it will not go in any micro ATX or ATX case, then Yes. Who will be working. However, you may need a power with longer cables to stretch throughout the case and the Board of Directors.