HP ENVY 4500: Scan the form of the printer for computer

Similar Questions

• HP ENVY 4500: Error: the printer could not print

  After a saga of long hours to get my new 4500 DESIRE to produce a readable text, I finally have a wonderful clear text, but now realize a new problem: the printer stops at Midway through each second page and it spits out just with the white background.

  An error message appears briefly in windows that said "the printer could not print. If I click on it there is no more details. It seems that windows stops just sending information to the printer. My print spooler service is running and we are within 5 feet of the router with a strong bond. I did everything I can think of including updating the firmware and driver.

  Any ideas?

  Thanks for your suggestions! However, most did not address my problem. I ran the Print and Scan doctor before posting this thread, but it found no errors. I was unable to get any additional details about the error.

  SOLUTION: I found a solution after reading this thread. I've updated Windows 8.1 a few weeks since the last time I had the printer works. I've updated Windows again today and the problem immediately went away.

  Although I couldn't see everything concerning him spool printing or printer in the update drivers, it seems that the bug was caused by a Windows Update, and subsequently fixed by another update. I was able to print a 40 page document and several page 5 those without any problem, when before it was bad, making it through several pages before he died. Fixed!

• Transfer photos from a memory card in the printer for computer

  Photosmart 7510 e all in a series - just bought and I cannot figure out how to get the photos from the memory card in the printer to download into the folder my pictures on my computer.  It seems that download on snapfish.  I need to share in this file so that I can "Browse" the file when I am seized images to a related work program.  Can anyone help.  I'm sure it's easy to do, but I'm not the computer more strong techy in the world.  In fact, I myself call a novice farmer.

  Hi fuzzypuppy,

  PC: Follow these steps to map the card reader

  1. Insert the memory card into the printer
  2. open my computer
  3. click on network drive mapping
  4 Select the letter of the drive you want and enter the folder \\192.168.1.101\memory_card

  Note: replace the 192.168.1.101 with the IP address assigned to your printer.

  5. click on finish, and the Player opens for access to the files

  Mac: Follow these steps to map the card reader

  First option: map a network drive on Mac OS X

  This method maps a network drive that will disappear if the network connection, or if you restart your Mac:

  1. in the Finder of Mac OS X, press command + K to bring up the window "to connect to the server.

  2. Enter the path to the network drive, you want to map, example: \\192.168.1.101\memory_card and then click on "connect".

  Note: Replace the 192.168.1.101 with the IP address assigned to your printer.

  3. Enter your login/password, then click 'OK' to mount the network drive

  4. the drive will now appear on your desktop and in the side bar of the Finder window

  Option two: map a network drive on Mac OS X which re-monte after system reboot

  This method allows you to restart your Mac and have the automatically mapped network drive back and appear on the desktop, it is more persistent than the above method:

  1. in the Finder, press command + K

  2. Enter the path to the network drive, you want to map, example: \\192.168.1.101\memory_card and then click on "connect".

  Note: Replace the 192.168.1.101 with the IP address assigned to your printer.

  3. Enter your credentials and click on 'OK '.

  4. the drive is now mounted, but continue to map to the persistence of reboot system

  5. now enter the system preferences in the Apple menu

  6. click on 'accounts '.

  7. click on "Login Items".

  8. click on the button + to add another element of connection

  9 locate the network that you drive previously mounted and click 'Add '.

  10 out of the system of preferences

• HP Envy 4500 - Scan does not, most periodic freezing

  Hello

  I'm having a ton of problems with my HP Envy 4500. I will first start by scanning. First to get the "No found computer" message when you try to scan (I can print fine however). I tried HP Print & Scan doctor, he said I was not fully installed the driver. So I download the file ~ 100 MB, then it passes through basic facilities, then allows you to "Connect to printer", I'm wireless and enter the IP address (which is connected and Excellent report) and about 10 seconds later, he says: "cannot find the printer. My only options are the search, the installation program and cancel. Therefore, I can never get to install and he sends me in a loop. I also file & Printer sharing turned on with Windows 8.1, with the automatic configuration of network devices.

  Since the end of the printer, I've tried manual and automatic IP and also directly connect without a bit of luck. In addition to these frustrations adds the printer freeze about every 10-15 minutes. I have to disconnect and reconnect the printer for it to work again because it is totally insensitive.

  Finally, my printer indicates an update is available, so I download a driver, but it ends with the OXB82EF9BA error code. All crashes again.

  I tried everything that I can for hours without success. Please notify.

  -Jesse

  Hello Jesse_B,

  Welcome to the HP Forums!

  I understand that you get some problems with your desire to 4500. I will do my best to help you! First of all, I need to know your operating system on the computer that is having these problems? Click here to read: Windows.

  Because you are having problems with the HP software, I'll give you a few steps to help:

  Please uninstall the software on your computer by following this document from HP about uninstalling the printer software. When it finished, I would like you to clean your Temp folder on your computer:

  1. click on the start menu, in search programs and files type % temp %

  2. press on Ctrl and together on your keyboard (this will highlight all)

  3. right click on your mouse and click on remove

  Now, perform a clean boot on your computer by following this Microsoft document here. This will eliminate the conflicts of software that occur when you install a program or an update or when you run a program.

  Secondly, I would like to you can use the Printer Wizard to install the full features software. This is the right software and you need to use a USB cord to perform this step. It will be much easier to find your wireless network. (It's only for the Windows operating system 7-8: 1).

  If you printer is still the gel, then make sure that the printer is connected to a live wall, not a surge protector. I want to see if that makes a difference. Also, try to reset the printer for more than 60 seconds. Leave the printer turned on > unplug the power cord at the back of the printer.

  You receive an error message "OX82EF9BA". This refers to an error in Windows Update. You must perform this update on your computer. Please post your results, I will be looking forward to hear from your part have a good night!

• printer HP from Mac 10.5.8 deskjet 970cse how to set up the printer for the printing of the project

  printer HP from Mac 10.5.8 deskjet 970cse how to set up the printer for the printing of the project

  Hello

  You can find out how to access and change the settings of quality below:

  http://support.HP.com/us-en/document/c01662356

  Kind regards

  Shlomi

• Error in the printer for 16-bit application that runs in Windows7 32 error "caused a floating point exception in hpcui121.dll to 0x5b39caea.

  Original title: Error in the printer for 16-bit application that is running in Windows7 32

  I have a 16-bit application. I'm running Windows 7 32. All of a sudden, I can't print my application. I have two messages: "caused a floating point exception in hpcui121.dll in 0x5b39caea" and "caused an access violation in WOW32. DLL to 0x6dc50421. Any help to solve the problem would be greatly appreciated.

  Hello

  Have you tried the methods suggested in my previous post dated August 29?

  Response to help you further.

• It is good to turn on the printer for a long time?

  Hi all

  It is good to turn on the printer for a long time? It causes health and ink?
  Thank you

  Hi AhamedSajad,

  Are there specific that appeal to you?

  Turn on the printer for a long time would not adversely affect his health. Nor does it affect the ink somehow.
  The ink could get used only when you use the printer to print.
   
  I hope this helps.

• EPrinter HP Envy 4500 Scan of the computer (HP Pavilion 14 Chromebook) / E-Mail?

  I just bought three HP Pavilion 14 Chromebook & HP Envy 4500 ePrinters for members of the family that I am trying to set up.  (I'm new to cloud computing).  Can I scan documents to PDF at the computer (Chromebook) / E-mail of the printer?  If so, how?  When documents arrive on the computer?  If the scan to e-mail is possible on the devices above, can I store several addresses e-mail ePrint in the printer choose?  Thank you!

  Hi eKeith,

  Thanks for shouting it and fast response.    No problem on other issues, it is we are here for.

  1. You will need to manually launch the built-in Web server.  What I've done in the past, it's just mark the ip address of the printer is to click instead of having to manually enter the IP every time. It works best if you set a manual ip address of the printer.  I've included a screenshot.
     1. Click on the "Network" tab in the SAP
     2. Click on 'Network' in the left side menu
     3. Click on 'network address (IP)' in the left side menu
     4. Click 'propose a manual IP address.
     5. Click on "Manual DNS server"
     6. For the server DNS preferred manual please enter 8.8.8.8
     7. For the auxiliary DNS Server Manual please enter 8.8.4.4
        
        
  2. There is no way to web analytics by default in pdf format.
  3. The default value corresponds to your "Downloads" folder, but you can switch to "Google Drive".
  4. If you click on the built-in web server Web Services tab, there is an option in the side menu on the left for updates. I've included a screenshot of where to find him.

  

• HP ENVY 4500: Scanned image appears in several parts of the whole.

  Hi people, for convenience, I'm going to number paragraphs describing my problem.

  1. any new product, which was to install a couple of days.

  2. the product prints and copy great and no problems. However, although yesterday I scanned a picture OK, now not so much.

  3. I hate to admit it, but I am 81 and my memory is not so great. Perhaps, I do not use the Protocol? Here are the details of the problem:

  4. when I scan using the screen of the printer the printer allows to scan that a good connection to my computer and an appropriate message is displayed on the monitor screen "Scanning". When parsing the result image is sent to the 'Documents '. So far, good.

  5. what analyzes all the I go to Documents and find the split image in ten 10 or more separate items and it would be a major task using PES or similar to the room together. In any case, would not be a solution, the photo scanning in a room, that's what I'm aiming for.

  6 but it is not the end of the problem. When I scan using the computer all scans correctly and is displayed in the preview window, which appeared on my screen. But the 'same' problem persists as above and the scanned image in appear in 10 or more parts at all.

  7. I don't think that there is nothing wrong with the product, rather I strongly suspect that I'm doing something wrong or maybe I misconfigured Setup.

  How can I fix this problem? What should I do to scan photos and documents as an image or a document and not 10?

  I'll be very grateful to help on this problem. Thank you very much. If you need more information, please just ask.

  Stehkoyeh.

  What follows is HPENVY4500 all_in_one printer, scanner, copier and fax. Professor, thank you very much for your help. However, I managed to fix my situation with the changes as follows:

  1. in the hp/scan utility on the computer. I clicked on the Scan of the computer and then the change analysis tasks...

  2. This was brought up in a popup window. I then put 'photo jpeg' highlight and click on modify.

  3. This brought another window. This is the important part. I've changed the menu presets "Photos, graphics, etc." and then that immediately under this Type 'exit' I've changed to read JPEG.

  4. everything that sounds very complex and I know I got lucky to fall on this procedure, because I'm good technically not for sure!

  However, the procedure above fixed my problem and my scans to and from the computer using Direct and wireless network were quite normal and very good. The scans are clear and bright and crisp colors. I am now very happy.

  As for the solution "self-cultivation", I'll certainly store that is far away and use it if you need. Although it was not necessary for my problem now, it's a very important protocol worth remembering.

• HP Envy 4500: scanning

  Hi - I have a wireless Hp Envy 4500 - can anyone tell if I can change the settings of scanning - that is - if I scan something that makes the size of the postcard, can it be scanned to finish as an A4 format?

  Hello

  No zoom under scan function so you can scan a postcard like size of postcard (using a higher resolution) and you can resize using any image editor.

  Kind regards.

• HP 4500 Envy: Envy 4500 - scan to email.

  What I need to scan to the computer, and then attach the computer file, or is there a quicker way?

  Hi @johnnick,

  Welcome to the Forums of HP Support! I read your post and see that you want to know if there is a faster way to scan to e-mail. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  This model has only the Scan to computer option available. You would have to scan the document and then attach the file.

  Here is a document for HP printers - Scan Control Panel.

  Good day! Thank you.

• How to re-scan the relationship between computer ip addresses and network names

  On my SBS 2003 network with six or so field PC clients and a few extra non-domaine workgroup (a few XP, some Windows 7) PCs, computers can access each other using \\computername. When I change the IP normally assigned by dhcp to a computer on my network to a static IP address, sometimes the other computers can no longer use \\computername, but I now have to use \\ip-adress instead.

  For example, A computer can open the folder "\\mypc\shared". I change the IP address on "MyPC" to a static IP, 192.168.0.220. Now the other computer must use \\192.168.0.220\shared"to access this folder '; \\mypc\shared' returns an error that the specified computer could not be found (or something like that).

  I know that I can enter the names and the ip addresses in the Hosts file, but it is manual, and computers it does automatically the first time.

  How can I get the PC to re-scan the computer names and IP addresses and link them back to the top?

  This can be a master browser problem, look in the event viewer for clues, these browser issues usually register error event ID 8021 and 8032.

  Note that this can take up to 13 minutes for a master browser broadcast and announcement answers from computers on the network, the browse list may not be filled until the ads are complete, so everything can be good.

  Stop and restart the browser to the computer repaired (or restart) on the computer that has the functions of the master browser will force a regeneration of the browse list.

  John

• HP Envy 5530: Emits a light HP Envy 5530, but the printer will not be running

  Printer of opportunity, so no guarantee: it out of the box, plugged in and set up. I was able to connect wirelessly to my computer, but I don't have the right to ink cartridges. When the ink is right, I plugged it again. This time the printer power not on at all. The only thing that happens is that the signal power light briefly when the first powered. This isn't a loose thread, because I can only duplicate the symptom when connecting, not when moving or unplug the device. It isn't food, as I have him succeeded and get the same exact symptom. (PS, thanks for the power supply internal easy-to-swap!)

  Is it a kind of fashion 'sleep'? Any suggestions as to what this is. I am rather stuck with it since I bought the ink and an additional power supply, so I would like to address them. Help, please! Thank you!

  Hello @azvlr,

  Welcome to the Forums of HP Support!

  I understand you are having feeding problems with your used HP ENVY 5530 e-all-in-one printer. I see that you have already installed a new set of ink and replaced the internal power supply without result. Unfortunately at this time if a new power supply fails to solve the problem of flashing light output that the next step would be to use the printer.

  Please take a look at this paper Support HP "no power" to ensure that all steps are completed that follows: The HP printer will not be running or to respond when the power button is pressed

  The HP Envy 5530 is always a newly released product. Therefore, I highly recommend contact our telephone Support queue to explore additional options. If a replacement printer is necessary food and ink will not be wasted because they can be used in the replacement printer.

  HP Technical Support can be reached at the: 800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  Regardless of the status of the guarantee, please call and see what additional options can do for you. I wish you good luck!

• HP Officejet 4500 g510n: the driver for HP Officejet 4500 g510n link does not

  
  

  Hi @Sluglit,

  I see by your post that the download is coming up with a 404 error. I will definitely do my best to help you.

  I was able to put in place the URL you provided, using Firefox. But I noticed that it was for Windows 7.

  Here is the link for Windows 8.1. HP Officejet Full Feature software and driver.

  If you have problems opening the web page, try a different web browser.

  If you appreciate my efforts, please click on the "Thumbs up" button below. Thank you.

• HP envy 7645: could not get the printer and computer to connect

  Have the computer and the printer on the same network.  Have loaded the correct drivers but the computer cannot set up the printer to connect.   Used to work properly.    Have tried with and without USB cable.   Very frustrating.

  Any ideas?

  Thank you

  Jim Gemmer

  Hello

  Thank you for using the HP Forums.

  Please visit this resource:

  software of Sierra to download and install macOS 10.12

  If you need help to connect your wireless printer, please watch this video about setting up the wireless configuration wizard:

  https://goo.GL/adPh0l

  @Time 01:54 to go.

  Hope that helps!