HP ENVY h8-1427: HP ENVY h8-1427 no sound after windows reload

Similar Questions

• HP Envy Phoenix h9-1330: No. IDT pilot = no sound in Windows 10

  Hello

  Currently I am fuming with frustration because last night I noticed my Audio Beats Panel was missing and when I searched for it in the menu start he says that the shortcut has been lost. I searched these forums very and advice provided to completely uninstall the IDT Audio driver, reboot and let Windows Update to reinstall the driver. However, when I came back to my computer tonight, Windows Update does not update and I have no sound driver, therefore, no noise. Since I was on Windows 10, HP chose not to create a driver on their Web site for my specific computer beyond Windows 8.1. Could someone help me please, I already made the decision that I would never buy a computer ever pre-engineered, much less a HP, but to make this last a bit more someone can you please tell me how I can get my IDT Audio Driver back as well as the Beats Audio Control Panel on Windows 10 64 Bit for the HP Envy Phoenix h9-1330.

  Thank you.

  sp71717 is an audio driver IDT W10.

  FTP://FTP.HP.com/pub/SoftPaq/sp71501-72000/sp71717.html

  sp71918 is only for notebook PC with the IDT.

  If you do a search in the forum Office IDT Windows 10, you'll see a lot of messages from members with similar PC ' where sp71717 works.

  Here's one for example yesterday.  There is no audio driver IDT W10 for referenced either model.

  http://h30434.www3.HP.com/T5/desktop-audio/beats-audio-missing-after-Windows-10-update/m-p/5795402#M55499

  Probably the registry is damaged, as you have tried so many drivers.

  The only suggestion I can offer at this point is to right click on uninstall to select a problem IDT HD audio device, check the driver uninstall, restart the PC and try again sp71717.

  If that works, for now you can have his base by performing the following steps...

  Go to Device Manager and click to expand the category of audio, video and game controllers device.

  1. Select IDT High Definition Audio CODEC under this category.

  2. Select the driver tab.

  3. click on Update Driver... button.

  4-> select Browse my computer for driver software.

  5. Select-> Let pick me from a list of drivers for devices on my computer.

  6. Select Audio device high definition (not IDT high def...)  "This is important). and click Next.

  A warning message may appear, but click Yes.

  7 Windows has updated your driver software.

  8 restart the PC.

  The key is step 6.

• HP Envy 15 t (G0T59AV): HP Envy laptop speaker poor sound quality (particularly acute) as the volume increases.

  I had been without my HP Envy laptop a few weeks after he bricked on me and I had to send in for repair, and when I came back the sound quality seems to be noticeably worse than what I remember. The sound in general seems a little intestine initially, and it does not handle certain tones fine treble, producing shrill notes that almost seem like they're clipping or something, as if it's too much for the speaker to manage. The volume level refers to it - it's much worse at higher volumes, but its volumes, it should be able to manage, and has dealt in the past. 30 is basically normal, I'll hear parts of it start happening about 40 volume or so, 60 sounds evil, and 80 is almost inaudible.

  My first suspect is the dustbin of Beats Audio with what they sent this thing.  He gave me problems before. I fiddled with the Beats Audio settings for a bit and couldn't find a lot of luck. The strange thing is, I searched Beats Audio driver updates, and I came to the top completely empty. All links to them were either broken, be directed to the page of HP support containing the drivers for the specific device model questioned. The driver for my laptop page shows nothing about the drivers of beats. And my device manager doesn't seem to show that no driver present Beats, either, even though I SWEAR there drivers for them in the past. The only present audio device is the Realtek HD Audio driver. The Beats Audio utility in the taskbar does not seem to think there is something wrong, however, so I don't know what's the case. Can someone help me?

  (I know of no reason that the question I sent my laptop in for repair would be linked to this, nor do I have any reason to believe that the person who repaired the laptop could have done anything, as all my files on my HDD seem to have been completely intact, but just for the sake of rigour : A couple of weeks, apparently caused by me accidentally stick a 3.5 mm headphone jack into the adjacent USB and damaged brick my laptop. The computer, stop immediately, if she was able to start right back up. The next morning, it was completely insensitive and would not start until it was. I knew with certainty that it is the USB at the time, I thought that it was unlikely that a damaged USB port might cause a full brick computer, but when I got back from repair, the repair summary said that the only thing to do for she was replacing a USB port.  Other than the good question, my computer was working perfectly since.)

  Hello
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question on your HP ENVY 15 t-k100 Notebook and problems with sound not working not properly. You can try-

  1. right click the speaker icon in the lower right corner of your time.
  2. click on playback devices.
  3. click on the speakers.
  4. click on properties.
  5. click on the Advanced tab in the Properties window.
  6. change the default menu Format in the highest quality.
  7. apply properties.
  8. click OK to close the Properties window. Reboot the laptop and test the sound.

  You can try to use theWindows Update Troubleshooter to fix updates that do not come through Windows.  Please restart the laptop twice to make sure that all updates are completed!

  Here is a link to a Microsoft fix for Windows 10, that might help.
  
  Please let me know how it goes.
  
  You can say thanks for trying to help by clicking on the Thumbs Up below! .
  
  Thank you.

• Downgrade HP ENVY 15 TouchSmart 15-j023ea for Windows 7

  Hello forum, I have a little problem here...

  I tried to downgrade my new TouchSmart from HP ENVY 15 15 - j023ea for Windows 7 because it is more familiar/current for me but unforunately I noticed that my laptop is not in the list of drivers for HP

  Also, recent models of Envy TouchSmart 15 have no drivers windows 7 (at least what I've seen)

  My laptop came with Windows 8 is installed. I installed my windows 7 on this computer and realized I have NO drivers for it...
  This is the reason why I went to windows 8 right now and try to find a solution.

  I really want to downgrade to windows 7 x 64. Are there drivers for this OS? If someone could help me I would really appreciate it!

  Hello:

  HP has come out with some new notebooks of W7.

  You should be able to use all the W7 x 64 drivers of this model on your.

  DO NOT USE ALL DOWNLOADS OF BIOS OR FIRMWARE FROM THIS LINK

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=6521379

  The only factor that is missing is the Intel HD driver you need to install the first before installing the Nvidia graphics driver.

  This one...

  https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=3719&DwnldID=23405&ProductFamily=Graphics&ProductLine=Laptop+graphics+drivers&ProductProduct=4th+Generation+Intel%c2%ae+Core%e2%84%a2+Processors+with+Intel%c2%ae+HD+Graphics+4400&DownloadType=Drivers&lang=eng

• Envy of HP Touchsmart m6 Sleekbook Windows 8 password reset

  My friend pulled a joke on me by changing my password on my laptop.  He changed the username to a false address, so the password during extraction is impossible and if you believe that he forgot the password.  How to do a reset? In addition, this laptop has no ability to drive.  Ive been told I'll need to open the back of the computer, remove the battery of 'shows' and the RAM sticks while pressing power, then replace all.  Sounds simple, but I know very little about computers, beyond basic user software.  Thank you!

  Envy of HP Touchsmart m6 Sleekbook Windows 8 password reset

  Hello

  You can use a password reset application such as the free sample on the following link - this can be created on a bootable flash drive.

  http://pogostick.NET/~PNH/ntpasswd/

  Kind regards

  DP - K

• TouchSmart HP ENVY 15-j151sr: do not load Windows

  Body of evry good day. My English is not good. I'm sorry for her before.

  My problem: after uncompletted my pc windows update don't load windows.

  I have the blue screen and follow the errors: inaccessible_boot_device) 1 or 2) ramdisk_boot_initialization_failed.

  8.1 Windows x 64.

  PC: HP ENVY TouchSmart 15-j151sr

  After I tried to reinstall windows and installed 10 x 64 windows, but after update, I have the same problems.

  If you know what happened I'll be grateful to you.

  Problem has been resolved after reset CMOS. Thx for the help!

• HP 4500 Envy: How to DISABLE the HP Envy 4500 status/confirmation email after you have sent the print job?

  How to DISABLE the HP Envy 4500 status/confirmation email after you have sent the print job?

  I don't want to receive the email confirmation of the printer - how do I disable it?

  Hello

  Please sign in to your account connected HP

  b click my account

  b click on Notifications.

  (c) uncheck the e-mail notifications

  d save change

  Kind regards.

• HP Envy: Recently upgraded to 8.1 windows, when I play the music/videos there a stuttering noise

  recently updated, since then, when I play music, it has occasional stuttering.

  My laptop has just been improved and in my opinion, he would have also lost its audio beats that was built in.

  (Not very good with computers so please explain things in simple terms)

  Thank you.

  Hi @harvingill ,

  Thank you for visiting the Forums HP's Support and welcome. It's a great site for information and questions. I looked in your question about your laptop HP ENVY and issues with sound quality issues.

  Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system at the time of purchase or need to be updated.

  I'd be happy to help you if necessary. How can I find my model number or product number?

  Please let me know.

  Thank you.

• HP ENVY 7640: failed to update for windows 10

  I had this error on update, I have windows 10

  • Error of Hewlett-Packard - Company WSD multifunction printer, MFP, HP ENVY 7640 of material other series - Null Print - 0 x 80070103

  • Update driver HP for Fax - series HP ENVY 7640 - error 0 x 80070490

  Hi, Hello!

  Thanks for sharing this request in this forum.

  Please, try the following steps and hope this helps!

  1. Go to settings-> devices-> devices
  2. Click the Device Manager link at the bottom of the screen.
  3. Open "printers".
  4. Then uninstall/remove the "unknown device" if present.
  5. Restart Windows 10 update.

  Thank you and best regards,
  meg0316
  
  I work in HP, but I am personally.

• Want H8-1534: could not start HP Envy H8-1534 pc after Windows update 10, 1607

  Windows 10 has made automatically update 1607 (KB3176936) on the pc of my wife (HP Envy H8-1534) about 6 days ago. Since then I could not start the pc the first time I turn it on.

  When I hit the power button on the monitor lights up with the HP logo on black screen as usual but the loading icon (spinning points) does not start. Fans start, but there is no activity on the Tower in the way of flashing lights or beep sounds. If I turned off the pc by using the power button, wait 10 seconds and turn on again, the pc will start up as normal. So far, for the last 6 days, it took the 2nd attempt so that it starts the pc every time. It almost seems as if there are not able to go to the system except for the fans in this first attempt to start.

  I ran a test at startup by pressing the F2 key without no problems found. I disabled the SATA power management in the BIOS. I ran the Windows startup with no result repair. Here are the results of the txt file.

  I researched all the possibilities. I fear that this could begin to worsen. Any help will be appreciated.

  Name: Target OS Test
  Result: Completed successfully. Error code = 0 x 0
  Time taken = 265 ms
  The test is performed:
  ---------------------------
  Name: Checking content Volume
  Result: Completed successfully. Error code = 0 x 0
  Setting time = ms 2391
  The test is performed:
  ---------------------------
  Name: Diagnostic Boot manager
  Result: Completed successfully. Error code = 0 x 0
  Time taken = 63 ms
  The test is performed:
  ---------------------------
  Name: Diagnosis of the system startup log
  Result: Completed successfully. Error code = 0 x 0
  Time = 0 ms
  The test is performed:
  ---------------------------
  Name: event log diagnosis
  Result: Completed successfully. Error code = 0 x 0
  Time taken = 62 ms
  The test is performed:
  ---------------------------
  Rated: Internal audit of State
  Result: Completed successfully. Error code = 0 x 0
  Time = 0 ms
  The test is performed:
  ---------------------------
  Name: Start-up condition Test
  Result: Completed successfully. Error code = 0 x 0
  Time taken = 31 ms
  Root cause found:
  ---------------------------
  State the start indicates that the OS booted successfully.
  ---------------------------
  ---------------------------

  DBHPENVY,

  I turned off quickly startup on the pc and until now he started first try twice. I'll let you know how it does after a few days of testing.

  I read everything it does and it is perfectly logical, how it might affect our pc is the way. Go to this link and read about it and see if she could help. I thought I had turned off fast start already, but after an update he might have gotten turned on.

  Here is the link: http://www.tenforums.com/tutorials/4189-fast-startup-turn-off-windows-10-a.html

• HP Envy 17 t: what size usb drive is necessary for the recovery of HP Envy 17 t 10 (64-bit) Windows?

  I just installed my HP Envy and wanted to set up a recovery disk.  The USB key must be less than 32gigs, but the example has not been updated for Windows 10 the instructions say.  It shows a recovery screen for a laptop of Win8 with the source of recovery like 17 concerts.   Is there a way to check the requirements for the front to accept the HP one time recovery option.  I have a new 16 GB USB key and wanted to make sure that it is large enough.

  Also do a backup image to DVD?   If so, how many DVDs?   The laptop is new and I added only Chrome and some minor programs.  My data files are always on an external hard drive.

  Hello

  Thanks for posting in the Forum from HP Support.

  To be honest, I don't know what size will be that these recovery files are because they can vary from the version of Windows to another. They can vary from a model.

  In my opinion, 16 GB is probably not enough.

  DVDs are usually 6 (6x4.7 GB = about 28 GB) but this can vary from one model.

  This possibility of imbedding maybe once, there are other ways that you can save your system indefinitely.

  This is a free option included in all windows (creating system image, it's free as included in Vista from the outset).

  http://support.HP.com/us-en/document/c03544793

  However, this option requires (e.g. USB HDD) external HARD disk or DVD. It does not work with USB flash drives.

• Envy: No sound after upgrade to HP

  I did all the updates that HP had in the meantime for my desire and lost sound from my PC.

  I have ten updated drivers and it did not fix the problem.

  I was able to restore before the updates & sound returns.

  Why is happening...?  This kind of questions is a nightmare for us customers... and

  makes me wish I sent the laptop to the store... but alas, now it's too late to go back.

  I'm afraid to update my PC because of this.

  Please notify.

  Product # M1W07UA #ABA

  Hello

  Your computer is a HP ENVY m7-n101dx.  Please download and install the driver Audio Realtek High definition (HD) next Windows 10:

  http://ftp.HP.com/pub/SoftPaq/sp74501-75000/sp74867.exe

  Kind regards.

• ENVY 14 Sleekbook - 14-k074ca: cannot find wireless networks after Windows update 10

  Hello

  I have problems connecting to networks wireless on my HP ENVY 14 Sleekbook (14K074ca) TS. Networks are available, as I am able to connect via my phone and other PCs.

  I tried the network troubleshooting and it failed. I've updated the network wifi drivers. I turned the button wireless on and outside. Nothing works.

  I noticed this change after a recent update of windows 10.

  Can anyone provide any help?

  Thank you.

  Hi@philipmanzano,

  Welcome to the HP Forum! I'm happy that you've become a member of the HP Forum. It's such a wonderful site to find answers and advice. Here is a link to guide you to what the most rewarding experience and answer questions about the display: first time here? Learn how to publish and more

  I understand that after a update Windows recent 10, you are having trouble connecting to wireless networks. Please read this post from @Great-Christine-Tree Commons fixes for wireless connectivity problems. Please let me know the results.

  Thank you! If it helps you to find a solution, please click the button "accept as Solution" down below in this message. "If you want to say 'Thank you' to my effort to help, click on the" ""Twww.Mountainview.rsb.qc.ca Up ' give me a Kudos.

• HP Envy 750-129ns: HP 750-129ns & Windows 7

  Recently bought a new Tower and I have a HP 750-129ns and upon arrival, I realized, it has not come with any windows installed. I'm not a fan of Windows 10 and and thought that I would stick with 7.
  I had problems to install, immediately after their installation windows load and the option to choose language appears my keyboard and mouse do not work. Ive read online that it's because win7 start do not recognize USB3 and the easiest way is to disable the USB 3 in bios until installation is complete. So is it possible in the 750 HP envy bios? As mine is in Spanish but I can't do so if they is an option to set provide the USB3.
  Thanks for any help that you can provide, this is driving me crazy.
  Alex

  Hey, Alex:

  The problem with your PC is the chipset Skylake and lack of USB3 drivers in your windows installation media.

  Skylake chipset does not have USB2 support until after you have installed the chipset driver.

  The solution to your dilemma is to run this tool on a PC with W8.1 or W10.

  There is a readme instruction link (found in the section release notes), which will provide you with the information that needed to get the W7 to install on your PC.

  https://Downloadcenter.Intel.com/download/25476/Windows-7-USB-3-0-creator-utility

• HP Envy 700-074 Graphics Card problem Windows 8

  Greetings,

  I recently bought the HP ENVY 700-074 (http://http://h10025.www1.hp.com/ewfrf/wc/product?cc=us & dlc = in & lang = to & lc = in & product = 5371495).

  Initial setup went fine without any problem.  I replaced the power supply so that I could add the graphics card from my old computer.  The power supply and graphics card worked perfectly for my old computer.  Feeding is a BFG Tech GX 550 watt modular power supply series.  The graphics card, I have installed is the Nvidia 560ti.

  The problem is that, when I start the computer, my screen goes to sleep (as there is no signal) until the login Windows 8 screen lights up. At this time, my screen lights up and it is normally.  However, if updates or restarts the computer, the screen turns off again and he returned sometimes when loading the desktop computer.  I tried to get into the BIOS to see if I could disable the onboard graphics, but I have been unable to access BIOS because I don't see anything on the screen during startup.  I removed the Nvidia card and returned to the use of the integrated graphics card and everything is back to normal.  I managed to enter the BIOS at the time here, but I don't see any possibility to disable the integrated graphics card or use the PCIe as main display (unless I missed something).

  I also noticed that Windows 8 shows I have 2 screens installed when only 1 is installed physiclaly.  My HP (HP 2009 m) monitor is listed in Monitor 2 and I initially had to go through the windows to get my HP Monitor to display the entire desktop (as it origionally extended from the start, the desktop computer).  However, number of monitor 1 is listed as monitor of generic cards.  Thinking that the computer used the non-existent monitor like main display when starting, I deleted the generic monitor than to have to reinstall windows.  I also tried to disable, but the problem persists.

  I guess that there is a conflict between the integrated graphics card and the Nvidia card.  However, I assumed that the edge will be disabled automatically after inserting a card into the PCIe slot as the integrated graphics card watch is no longer under device mananger.

  Hello:

  Have you changed the settings of the BIOS 2 (required) before installing the video card no HP?

  If this isn't the case, please read the info on the link below.

  http://support.HP.com/us-en/document/c03653200