HP Envy4507: My printer is set to behave

Similar Questions

• How is to send the native port of the printer command, when the printer is set as the default printer?

  I installed on a Windows XP printer and set it as default printer.

  I also have the manual provided by the manufacturer of printers, which defines the

  commands that can be sent over the serial port, then the status of the printer

  is extracted.

  Thus, for example, by sending an order consisted of 3 bytes: 34,56,78 to the printer (COM5) COM port

  I can get an answer advising me on the State of the printer.

  However, when you send this command to COM5, I get the following exception:

  "The given port name does not start with COM/com or is not resolved to a valid serial port. Parameter name: portName. »

  for which the printer vendor insisted on request microsoft support center.

  The port name of the printer is properly set to the correct a (COM5).

  Any ideas?

  Hello

  Your Windows 7 is better suited for the IT Pro TechNet public.

  You can follow the link to ask your question: http://social.technet.microsoft.com/Forums/en-US/category/w7itpro

• Hello world! I try to print my indesign booklet in pdf format, however, is greyed out in the SETTINGS of the PRINTER to set the CUSTOM PAGES.

  Hi everyone! I try to print my indesign booklet in pdf format, however, I have the option to in the SETTINGS of the PRINTER to set the CUSTOM PAGES is grayed out. I already tried to use the Acrobat 9 PPD here: https://forums.adobe.com/message/5819369#5819369, but still it does not work. I chose the PostScript file and in the next menu, the new preset, I downloaded does not work. When I export to PDF, all my bleed, colour, cultures etc information is lost. What could I do it wrong? Help, please. I use Windows 10, Indesign CC.

  As mentioned, you don't do this correctly.

  (1) you ask your printer if it has specific requirements for a PDF file.

  (2) If you do not have this, choose export using Adobe PDF export.

  3) select from the list of presets, PDF/X-1a

  (4) in the subsequent dialog box tick Pages (not Spreads)

  (5) under the tab printers and bleeds, select Use background settings lost document.

  Pass the PDF file to the printer, as Bob mentioned that printers will make the taxation.

• HP Laserjet m1212nf mfp printer: cannot set RINGS TO ANSWER

  Hello

  I have the printer HP Laserjet 1212nf.

  It works very well in the past.

  The fax was not connected during the last year.

  Now, I reconnected and I can't send or receive faxes.

  I also see that I can't set the number of rings to answer - is what I see on the fax screen: 0 (0-0)

  Can it be fixed?

  Thanks to you all

  Hi @AmirTA,

  Have you tried the reset I sent you private message?

  If you can't change the settings of the printer, I would suggest to update the firmware of the printer: LJM1130_M1210_FW_Upgrade_Security_signed - 20150405.exe

  It may be a hardware problem, if the options in the menu, you cannot change them.

  You must use a cable 2 son.

  Voicemail can interfere with faxes that crosses. One suggestion would be to get setup distinctive ring on the line or to disable voicemail.

  You can set the fax to the manual, but you must press the printer button each time to receive the fax.

  Keep me posted. Thank you.

• Epson printer utility set up error 1131

  Please can anyone advise me on what I would do I get the above error when you try to install the printer driver for Epson XP - 305?

  Thank you

  Hello

  Thanks for posting the request in the Microsoft community forums!
  It seems that you can not install the printer driver for Epson XP-305 on the computer. Provide us the information

  You did changes to the computer before the show?

  Let us try the troubleshooting steps to resolve the installation of printer driver on the computer.

  Place the computer in a clean boot state, and check if you are able to install the printer driver.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After the adventures of shooting set the computer to start as usual by performing step 7 above of the Knowledge Base article.

  Try to install the driver from the link:

  http://www.Epson.co.UK/GB/en/viewcon/corporatesite/store/products/mainunits/support/11536

  Check out the link:
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  We know if you need help with the Windows operating system. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.

• Photosmart HP 6520: printer is set for photos and cannot print from Web sites

  My printer setting have been changed and now I can't print anything a website (as a receipt, return labels etc.) because the printer thinks it is photo printing. I see what I want to print in the preview before printing, but when I push PRINT a box appears that says:

  LIBRARY name XPS save as XPS Document type and I get two choices to click on... Save or cancel.

  I can print whatever it is normally my WORD program. I can't find information on the parameters in the booklet that came with the printer and I can't figure out how to change the setting back.

  Thanks for your help.

  Baris

  Welcome to the Community Forum of HP.

  Reference - you need to have first installed the software of complete functionality on your computer for the printer:

  General instructions to install the software of the printer 6520

  =====================================================

  I checked both browsers: Firefox and Internet Explorer 11.

  The following can help:

  Firefox

  Click file > print >

  Examine the drop-down list, you should see the options (list), the choice to select your printer - make sure that you do not select the 'fax' >

  Ok

  -------------------------------------------------------------

  Internet Explorer

  Click file > print

  Under Select printer >

  The options appear one after the other, XPS Document writer is one of them, your printer must be another > select your printer, and then click print

  -------------------------------------------------------------

  If you accidentally "disconnected" position your printer as the default printer, the following should help bring back:

  Control Panel > display icon > devices and printers > one click with the right button on your printer >

  Select Set as default printer

  -------------------------------------------------------------

  Click on the Thumbs - Up Kudos to show that you appreciate the help.

  I am happy to provide assistance on behalf of HP. I do not work for HP.

  Click on accept as Solution when the answer provides a fix or a workaround!

• Disadvantages of the printer: cannot set the default printer and cannot print a PDF file

  Why can I not print with my HP Laserjet MII32FP pdf files? I not had problems like this before with my old printer. I can not even this set as my default!

  Hi Stephanie,

  This problem can be caused if the latest version of Acrobat Reader is not installed on your computer.

  1. How do you open PDF files? Using the Adobe reader software? If you use Adobe, then which version you have installed on the computer?

  2. If you use other software to open PDF files, is this software?

  3. you receive an error code or message?

  I suggest you to follow the steps mentioned below and check if it helps.

  Method 1:

  I suggest you follow the steps mentioned in the article below.

  
  Does not print PDF | Reader 10.1.2 | Windows

  
  http://helpx.Adobe.com/Acrobat/KB/PDF-wont-print-reader-10.html

  Method 2:

   

  Follow the steps in the link.

  Resolve PDF printing problems. Acrobat, Reader

  
  http://helpx.Adobe.com/Acrobat/KB/troubleshoot-PDF-printing-Acrobat-Reader.html

  If you need further assistance on this topic, let know us and we will be happy to help you.

• I can't reinstal my printer or set as default

  I have a printer scanner Kodak esp of wifi, when I click Print it says that your printer is not set as the default printer.  I tried to reinstall

  Have you restarted your computer? I noticed that I had to do this in order to define a printer that I recently installed by default.

  If the problem persists:

  I suggest you to uninstall and reinstall the latest compatible drivers for Windows 7.

  You can also run the troubleshooting of the printer.

  Open the printer Troubleshooter

  Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.

  For more information, visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Printer problems:

  http://blogs.technet.com/b/markrussinovich/archive/2010/04/12/3324570.aspx

  Run the printer difficulty of:

  http://support.Microsoft.com/GP/printing_problems?EntryPoint=WHHT

  You can see the below mentioned links.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer

• Attempts to connect to the Dell V505 printer wireless set up - get error "WSD Print has not a driver" peripheral.

  I'm trying to set up a printer Dell V505 to a Dell Studio laptop running Windows 7.  I followed an indicating knowledge base article I want to uninstall my driver from dell and installed by using the Windows Vista SP2 compatibility mode, what I've done. After having done that, I'm gettting error "WSD Print device is not a driver" I'm not sure if it's a windows problem or from dell if seeking answers at once.

  This printer connected easily to the Vista desktop running when put in place wirelessly.d

  Thanks for any help.

  Connect to the device using the WSD Protocol is available only when it is directly connected to the printer.   Try setting the printer using a Standard TCP/IP Port or if the Vista machine is 32 bit, and Windows 7 machine is also 32 bits (or the two bits 64) sharing the printer from Vista and establish a connection to get the installed printer driver, and then perform the network plug and play on the Plug-and-play device should use the driver to install the rest of the unit.

  You will need the network printer configuration page to obtain the host name or IP address and create a Standard TCP/IP Port. Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• Print area setting of the printer - brightness slider module

  When I send my photos to the lab for printing, in order to obtain the final print to match the exposure on my screen, I have to increase the exposure in the develop module before rendering my last image to send to the lab.  In general, I add environ.4 to any exposure setting I already put in the develop module.  This usually gives me a perfect exhibition match.  Thereafter, I must then remember to adjust the exposure back on all my photos that I send to the lab.  Otherwise, I do sometimes exposure increase on a virtual copy, but then I have a ton of virtual copies extra clutter things.

  I recently learned in the print module, can I increase the brightness with the brightness slider.  If I print to jpg in the print module and use the brightness slider, I could produce my lab files and eliminate 'cleansing' operations mentioned above.  However, I don't really know how the brightness setting printer slider relates to exposure of the develop module slider.  That is, what each cursor movements are considered as equivalent - if I normally increase exposure de.4 in the develop module, how can I increase the brightness slider worms in order to match that?  I would increase the brightness of 10, 15, 20 slider... ???   I have no idea!   How these two cursor relate?

  Any help would be appreciated!

  Thank you!

  Bruce

  PS. because I know someone will ask, YES, I have corrected my monitor color.  However, my screen is VERY bright and I worked with the CC seller to lower the brightness of my screen and 90 lumens, but it's still too light and we cannot safely he set lower without risking damage to the screen.  That's why I regret to make the manual exposure increase.

  Rather than having to remember to reset the brightness, you can use the soft proof feature and create a virtual copy and reduce the brightness on the virtual copy. Then you can decide when / if to remove the virtual copies.

• ENVY4507 HP: Printer does not print new documents 2007 microsoft word

  Hello. I was printing off my urge to hp of microsoft word 2007 and then today, I'm going to create a new microsoft word document and the printer will not print the entire page. It prints the first two rows, then stops. I uninstalled and reinstalled the printer and drivers, stopped the coil and it restarted and then restarted the pc. Still nothing. Ideas please

  Hello, @emma2028 - greetings!

  Welcome to the Forums of HP Support!  It's a good place to find the help you need, other users, HP experts and other support staff.

  Appreciate your efforts of solving problems. They were spot on.

  Since you have already reinstalled printer drivers, it looks like a problem with the Microsoft Word application. First of all, try to make a "copy" with the screen touch printer. If the copy comes out of the well, then try to make an impression of some other applications like Adobe reader, Notepad or your Email. If all other printable work properly, then the problem might be with the suite Microsoft Office. I suggest that you reinstall the same.

  You can also check the Microsoft forum, which deals with the same issue: http://hp.care/2dakge6

  Hope that answers your questions. I'll watch for your reply!

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• the printer allignment set message is false

  HP Pavilion a4310f

  HP officejet 6480 printer

  Windows 7 Home Edition

  Whenever I turn on the printer, I get the message «alignment page error» I haven't added paper, changed a cartridge or make other changes to this printer.

  I have removed/reinstalled the software of the printer several times. It takes a lot of time. This seems to be a major flaw with this printer.

  Y at - it anything to prevent this? This has become very annoying.

  Do I have to leave my printer HP Officejet 6480 permanently?

  Help, please.

  P. S.

  I GET THIS MESSAGE EVERY TIME I I TURN on THIS PRINTER, no. CARTRIDGE EXCHANGE!

• HP deskjet 1515 print margin setting?

  I have recently bought all-in-one printer, HP Deskjet 1515 and cannot adjust the margins of the print area. When I print an A4 document, an area at the bottom does not print. When I print a 6 "x 4" or photo 10 x 15 cm, the entire surface of the paper is not printed, leaving a margin to the right of the photograph of landscape or the background of a portrait photo. Can someone advise please how to fix?

  Hello

  Your printer does not support printing without margins so please do not adjust the border, just try to print normally.

  Kind regards.

• OfficeJet 6700 Premium printer: Re setting My HP 6700 x Premium

  Emergency assistance is needed please! I managed somehow to me locked out many many functions on my printer that I tried to install on my new HP laptop since Tuesday, January 19, as well as the problem of getting my port number! as I have nowhere to put a disc in my new laptop! even if everything seems to work at the minute, I'm very worried if my printer need Urgent updates my printer stops working! I'd appreciate any help I could be offered please! informaitiom even on a full re my printer together please! some things that are locked on my printer are the date and the time in my country there are about 15 to 20 functions I managed to block me out!

  Thanks for any help you can give too

  Hello

  Thank you for using the forum.

  Please download and install the full software features from this link to win 10 for your printer:

  http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-6700-premium-e-all-in-one-printer-series-H711/4322971/model/4323605#Z7_3054ICK0K8UDA0AQC11TA930S6

  You can try to reset your default printer.

  On the front of the printer control panel select Setup > tools > Restore Factory defaults to reset the printer to its default settings.

  We recommend that you uninstall the previous software before you reinstall the downloaded software FULL of features,

  Hope that helps.

• Printer cannot set my default printer

  Hello.. I installed the printer in my laptop.its toshiba works fine and I can not put my default printer. so, what could the problem any one sugest me to the solution.

  Try the link below for printers of difficulty of the problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  It will be useful.