HP - evaluation order

Similar Questions

• Evaluation order of setting using the Table of Interface EPMA

  Hello everyone,
  the new post is to share with you a question EMP architect that I don't know how to fix.
  I use table Interface to load several dims on my App. planning and before you deploy it to the EPMA, I check my Dim evaluation order. My choice is very simple: the only Sun crept toward the right the order property of the assessment panel is my Sun account.
  After validation and delpoyment of my App on EPMA (both successful), I noticed that the order of evaluation on the planning app is not the same: no sun is evaluated (empty can on the right panel).
  This problem has upset my forms because I can't use SmartList or percentage account, for example.
  Could someone help me?
  
  Thanks in advance
  
  Stefano

  Hello

  Last Planning patch - Patch 8527948: Hyperion Planning - System 9 Release 9.3.1.1.11 Service difficulty
  You have all the listed patches EPMA 9.3.1 and should install all.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Tabs vs dimension Performance evaluation order

  Hi all
  
  What is the difference between the order of evaluation of performance parameters vs? All I know is that if we define the hourglass / hour glass on stick to change the order of the dimensions in the parameters of Performance tab.
  
  Any information will be very useful.
  
  Thank you
  
  AD

  Hello

  The performance parameters set if the dimension is dense or sparse and the order in which they are placed in the outline.

  The evaluation order defines how all to be assessed on a form, for example if you have a defined member account as a data type of text and you want it to appear as text on the form and then you define account to evaluate.
  If you have other dimensions with different data types, you must set the order of evaluation based on how you want to display in the form.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• instruction evaluation order box

  Hello

  This is a pretty basic question, but I couldn't find a clear answer to this.  We have a following code:

  

  Many people feared that there is a race condition between the definition of the State of the RTS and DTR in the diagram.  When I start debugging the code, the RTS State seems to be first as the case statement is not evaluated until the State of the RTS's setting.  A guy pointed out that debugging code does not faithfully represent the order of execution of the code and therefore cannot be used to determine whether or not it's a race condition.

  In fact, I hung the material up to a Logic Analyzer and ran the 1,000 cycles, and each single cycle seems to have state first put RTS, which seems consistent with what the debugger.

  My question is: can I do trust the code debugger step by step?   In addition, LabView is assesses the case statement with objects outside the case statement?

  Any clarification would be greatly appreciated.

  Thank you

  Patrick

  Hello Patrick,.

  Your colleague is correct - the image you posted shows a potential race condition.  Do not forget that execution highlighting discussions single execution of your diagram of block and only one thing can happen at the same time, so it does not faithfully represent the execution of parallel processes.

  The good news is that the solution is simple - simply to introduce a dependency of flow that forces the execution order.  Connecting wires instrument and/or error after you set the RTS of State rather than forward seems like he would do what you want.

  Kind regards

• Hyperion Planning evaluation order of Dimensions

  Hi all

  Hope you all have a good day.

  I have a question about Hyperion Planning (version11.1.2.2.306) order of evaluation of the Dimension which is part of the following navigation:

  Administration > manage > Dimension > third tab

  What is the ideal way to set the order of evaluation?

  Currently, we have the Dimensions dense scattered dimensions first and then (higher number of members at least). What is the proper way to set the order of evaluation?

  Thanks in advance for the help.

  Concerning

  MSA

  Try to see the links given below. They will provide more understanding on the outline of adjustment and control

  http://www.keyperformanceideas.com/outline-tuning-modified-hourglass

  http://avkhyperion.blogspot.com/2013/04/optimization-in-essbase_5.html

  https://blogs.Perficient.com/Oracle/2014/06/17/Essbase-application-performance-tuning/

• Function defined by the user in order by?

  Hey guys.  We try our postgres database to Oracle to port, and I fall on this issue.  We have columns called "sortSequences", which are arrays of arbitrarily long integers.  To some fine POC, I use varray(), but that probably won't work as a production application, due to its strongly defined by size.  In any case, the crux of the problem is that I need to be able to select * from foo by sortSequence, where the evaluation order is custom code.  The array of integers represent essentially mathematics of infinite precision and we have a deterministic algorithm to compare, but we can't just produce a value between them (what I think keeps me to use a card member function in a user-defined object type.)  In other words, we don't really care what are the values, we are just using their collectively as an index of sort.  An aggregate function like the right answer, and a simple scalar function is out of the question.  We watched the field index, but it is not clear to me that even if we created an operator related to our type defined by the user that the db would use this function for order by rating...

  Everyone can think of a solution to this problem?  If we must live without this feature, we can reproduce in the application code, but we want to avoid that at all costs...

  Thank you

  Brian

  The array of integers represent essentially mathematics of infinite precision and we have a deterministic algorithm to compare, but we can not simply to produce a value between them (I think preventing me to use a card member function in a user-defined object type.)

  OK, but what about a method of ORDER?

  Since you seem to have the algorithm already, is not just a matter of implementation of the COMMAND method?

  Performance, it is not ideal but it's a start.

  Something along these lines:

  create or replace type array_t is varray (32767) integer;

  /

  create or replace type sort_sequence_t as object)

  v array_t

  member function serialize return varchar2

  , for the integer return order member function match (o sort_sequence_t)

  );

  /

  create or replace type body sort_sequence_t is

  member function serialize return varchar2 is

  RES varchar2 (4000);

  Start

  because me in 1... self.v.Count loop

  If I have 1 > then

  RES: res = | ',';

  end if;

  RES: res = | TO_CHAR (self.v (i));

  end loop;

  return res;

  end;

  order whole return leg (o sort_sequence_t) member function is

  whole v1;

  whole v2;

  Start

  because me in 1... Greatest (self.v.Count, o.v.Count) loop

  If self.v.exists (i) then

  v1: = self.v (i);

  on the other

  v1: = 0;

  end if;

  If o.v.exists (i) then

  V2: = o.v (i);

  on the other

  V2: = 0;

  end if;

  If v1< v2="">

  Returns - 1;

  elsif v1 > v2 then

  Return 1;

  end if;

  end loop;

  return 0;

  end;

  end;

  /

  Tests...

  SQL > with sample_data (id, sort_seq) as)

  2 Select 1, sort_sequence_t (array_t (10,1,1)) of all the double union

  3 select 2, sort_sequence_t (array_t (1,1, -1)) of all the double union

  4 Select 3, sort_sequence_t (array_t (1,1,1)) of all the double union

  5. Select option 4, sort_sequence_t (array_t (1,1,2)) of all the double union

  6 select 5, sort_sequence_t (array_t (1,20,1)) of all the double union

  7. Select 6, sort_sequence_t (array_t (1,7,1)) of double

  8)

  9. Select t.id

  10, t.sort_seq.serialize (as seq_str)

  sample_data 11 t

  12 order by t.sort_seq;

  ID SEQ_STR

  ---------- --------------------------------------------------------------------------------

  2-1,-1, -1

  3 1,1,1

  4 1,1,2

  6 1,7,1

  5 1,20,1

  1 10,1,1

  6 selected lines

  Post edited by: odie_63 - added example

• Defining the order of assessment and the dimension of the reorganization

  Hi, I was going through the pdf of hp admin and I have some doubts
  What do you mean by setting the option of evaluation in the planning of the means, and why it is recommended to select only one dimension (order of evaluation of adjustment)
  
  in the section "on the reorganisation of the Dimensions", it was mentioned on the order of aggregation rare dimensions before no aggregatin ones, what are these two types and also he was supposed to organize the scattered dimensions in order of more scattered members in less scattered members but is not the other way around I mean depending on hour glass order should be less rare for most sparse dimension and attribute in the end
  
  the difference in setting evaluation order and reorder dimensions, is what exactly?

  Reording dimensions defines the order of the dimensions in essbase, rearrange the dimensions can be part of the optimization of the database.
  The definition of the order of evaluation is more to do with how the dimensions are evaluated in shapes, so if the account is set to be first, then the properties of the type of the data member account will be used first, for example if the Member has the percentage value then Member will be displayed as a percentage.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Percent sign

  I created an account of percentage. But neither space nor Smartview display values with the percent sign.

  Hello Cheney,

  You just need define the evaluation order displayed as % data.

  See the oracle documentation: Administrator's Guide

  for evaluation order understanding and to understand the idea you can also consult the blog: Hyperion Planning and more...

  Hope this helps!

• Accuracy in web forms

  I have a condition in which the user wants to enter a number in a web form that is 12.65

  Display the rounded number in web forms, i.e. 13

  The number but should always be resident as 12.65

  I tried rounded to zero in forms, but it takes only submit decimals. Haven't found any provision on in preferences.

  Found this, but still not to accomplish what is required. Arrondissement of http://docs.oracle.com/cd/E12825_01/epm.111/hp_admin/frameset.htm?form_opt.html

  Any ideas?

  Please make sure you have defined the order of evaluation of the dimensions. By default, no dimension is in the order of evaluation. To make precision work correctly, you must add the dimension of accounts to the order of evaluation.

  1. Administration-> manage-> Dimensions
  2. Go to the evaluation order tab and add accounts to the order of evaluation

  Let's say you set the minimum precision: 0 Maximum: 0 to currency no accounts, then, when you enter 34.2 in the form online, it will be displayed as 34 but the value goes in essbase as 34.2

  You can test it by making a Smart View extract for this member with the type of connection as Essbase

• Cannot get the form online to display the symbol '%' or correct precision - 11.1.2.3

  Hello

  I have a member in Sun accounts is just a pilot.   It has the property of "percentage" tag to it.  In the online form on the "other Options tab in the section of precision, I have values of percentage of value: Minimum = 0 = 6 Maximum."

  When I goto the online form, I enter 2.123456.  He appears in the form 2.   It should be view 2.123456%

  Is this a bug or I do something wrong?

  You have defined the order of evaluation? Classic > Administration > manage Dimensions > evaluation order > dimension of shifting to the right > save

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Comparison operators - between the upper and lower - performance

  Hello

  I use instead of < and superior of the operators.

  Please let me know which works better for dates.

  I tried searching online, but couldn't manage to get and answer.

  to help between -.

  TRUNC (O_DT) BETWEEN

  (MAX_DT) + 1 TRUNC AND TRUNC (SYSDATE)

  using the < and >.

  TRUNC (RECORD_DT) > = TRUNC (MAX_DT) + 1 AND

  -TRUNC (RECORD_DT) < TRUNC (SYSDATE)

  Thanks in advance

  I use instead of< and="" greater="" than="" operators="">

  Please let me know which works better for dates.

  I tried searching online, but couldn't manage to get and answer.

  It's very strange. When I search "Oracle 11 g BETWEEN" I have tons of references and one of them is the language SQL Oracle doc for the BETWEEN operator that answers your question:

  http://docs.Oracle.com/CD/B28359_01/server.111/b28286/conditions011.htm

  And the value of

  expr1 BETWEEN expr2 AND expr3
  

  is the value of the Boolean expression:

  expr2 <= expr1 AND expr1 <= expr3
  

  If expr3 <> expr2 , then the range is empty. If expr1 is NULL , the result is NULL . If expr1 is not NULL , then the value is FALSE in the ordinary case and TRUE when the key word NOT is used.

  The Boolean operator AND can produce unexpected results. More specifically, in the expression x AND y , the condition x IS NULL is not sufficient to determine the value of the expression. The second operand must always be evaluated. The result is FALSE If the second operand has the value FALSE and NULL otherwise. See "Logical terms" for more information on AND .

  As others have pointed out the operator BETWEEN is included the two end points.

  But slightly differently that others have commented the above evaluation order:

  Expr2<= expr1="" and="" expr1=""><=>

  Note that 'expr2' is on the side left SIDE of the operator; It is different from that

  n between x and y, = , n > = x and n<=>

  Also note the VERY IMPORTANT NOTE about this AND operator. This is why the order just mentioned above (expr2 on the left side) is important and, if the null value, can affect the results.

  In practice, for the simple example date of your use cases generally useless to worry about using it.

  Using BETWEEN makes it easier to ensure that endpoints of the range are used (if it is your use case), but can generate errors if high endpoint is not supposed to be used. And, in my experience, using BETWEEN seems to be easier for new developers to code and maintain for two reasons:

  1. There is no chance to use the wrong accidental deletion of an equal sign ('=') operator. An accidental deletion would not often be noticed but can potentially cause data from weeks, months, or years later when happens to you just to have data with this exact endpoint. Bugs can be very long to find.

  2. it is easier, IMHO, to realize that you don't need a TRUNK or other function on the date column since when you use BETWEEN you NEVER check for a match on the exact date using equals. New developers, especially those from other DBs, may have a hard gripping as an Oracle DATE value ALWAYS includes a component "hour". So, if you code this:

  myDate = someValue

  This is ONLY true if the components of the date and time are equal. Which is exactly why you have the TRUNC function in your example. The only way to use an EQUAL sign like that if you want the data from "Today" is do TRUNCATES the two values. And if you do that allows you to disable the use of an index that might have been used before (as others warn you).

  If you are using BETWEEN you apply TRUNCATES the constant 'someValue' (or SYSDATE in your example). So, I find that when I teach/train use BETWEEN new developers, they have a lot less trouble knowing how to write such a condition correctly. They make fewer mistakes that can cause data problems or to disable the index.

• OutlineLoad utility not only loading text or dates in Hyperion Planning

  Good afternoon

  I tried several times to use the Outlineload utility to load the text and dates in an unsuccessful planning application. I use the Version of EPM: 11.1.2.1. Here are the steps I took:

  1. in EPMA, created a new Member, CommentsText, under the accounts dimension and all its data type 'Text' and then deployed the application.

  2. has created the following source file:

  Pilot Member, value, perspective, loading data Cube name

  CommentsText, go to my comments, here, ' Jan, FY10, USD, real, Final, C101 ", BUD_IS

  While preparing the source file, I made sure all the dimensions were represented by one member at the lower level.

  3. I ran the command below to the DOS command line:

  OutlineLoad S:Localhost A:PLN_GAL /U:admdem / m /I:d:\temp\loadtext5.csv /TR /L:d:\temp\Outlineload-log.log /X:d:\temp\Outlineload-exceptions.exc

  See the command to run successfully. This is what the log file:

  [Thu Sep 26 19:16:36 CDT 2013] Input file located and opened successfully "d:\temp\loadtext5.csv".

  [Thu Sep 26 19:16:36 CDT 2013] Record header fields: pilot Member, value, perspective, loading data Cube name

  [Thu Sep 26 19:16:36 CDT 2013] Finds and uses the 'OFADataLoadDimension' size for loading the data in the application 'PLN_GAL '.

  [Thu Sep 26 19:16:36 CDT 2013] The parent-child command option (switch/h) will not be performed: this option is not available for the dimension "OFADataLoadDimension."

  [Thu Sep 26 19:16:36 CDT 2013] Member from input command (switch/o) option file will not be performed: this option is not available for the dimension "OFADataLoadDimension."

  [Thu Sep 26 19:16:38 CDT 2013] A refresh of the cube operation will not be run.

  [Thu Sep 26 19:16:38 CDT 2013] Create filters for safe operation will not be performed.

  [Thu Sep 26 19:16:38 CDT 2013] Look at the files of newspapers of Essbase to status if Essbase data have been loaded.

  [Thu Sep 26 19:16:38 CDT 2013] Planning of vector data store finished loading processes. 1 data record has been read 1 record of data have been processed, 1 has been loaded successfully, 0 is rejected.

  But even if the log indicates that the comments were written, no text is written!

  Two possible problems, I've noticed are:

  1. the logs says: "located and using"OFADataLoadDimension"dimension for the loading of data into the application"PLN_GAL" I don't know what can be the dimension "OFADataLoadDimension."

  2 even if I put the text in EPMA data type, the data type is NUMERIC - NOT TEXT and more once I have deploy the application and check with the console service Regional. This blows my mind. I don't know why this is happening.

  Can someone please help? I tried A to Z for 2 days without success.

  Thank you!

  Luis

  I suppose that you have set the order of evaluation in EPMA - Parameter Data Type evaluation order

  To be honest that I have not used the utility outlineload to load the data when planning is EPMA mode, only in classic mode, in theory, it should work as it isn't metadata and data but not something that I tested.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Problem with data form

  Hi, in my form of data of the data type is not displayed

  Thank you

  If you have a member account (?) which is defined on the data type of percentage? Is this dimension in the order of evaluation.

  Otherwise, add to the evaluation order defining the evaluation order

  Concerning

  Celvin

  http://www.orahyplabs.com

• Display percentage

  In this post, I found a trick (How to display the percentage (%) Sign planning form... ???
  
  But what happens if my account dimension is rare? Are there other ways - next to the formula of Member?

  But what happens if my account dimension is rare? Are there other ways - next to the formula of Member?

  Even if the account is sprase you can move in the evaluation order, unable to understand your question, more details will be useful.
  For more information on the evaluation order, take a look on:
  http://blogs.Oracle.com/HyperionPlanning/entry/evaluation_order

  See you soon... !!!

• Percentages vs scenarios

  I have something that does not work quite as I expect and hope that someone could point me in the right direction...
  
  I have the following calculations (e.g.):
  
  ¦¦ ¦¦ ¦¦ Tender forecast tender vs forecasts
  Total value 100 120 20 ¦¦ ¦¦ ¦¦
  Total cost ¦¦ ¦¦ ¦¦ 90 105 15
  10 15 5 ¦¦ ¦¦ ¦¦ margin
  ---------------------------------------------------------------------------------
  ¦¦ ¦¦ 10% % 12.5% 25% ¦¦
  
  
  'Submission vs forecasts' = forecast - tender, as seen in the three first lines. % Margin is margin / total value.
  
  The 25% which is the % margin calculated numbers (5 / 20) above him, but I want the 25% to view forecasts 'margin %' - tender '% margin' and 2.5%.
  
  I thought I should be able to do this by adding the scenario after counting in the parameters of the evaluation order, but which seems to have no impact.

  Hello
  Maybe if you try enabling 2 pass calc onnTender vs forecasts?

  See you soon,.
  Alp