HP G61 - no post power light is on

Similar Questions

• S5-1224 blue power light stays on after stopping; What happened to the orange light "sleep"?

  I have a Slimline Paviliion S5 - 1224.  No changes or additions were made to the material.  When I stop the machine, it is used to change the orange or the wide power led.  Now, the blue power light stays on and blinks after power off the power.  The light on the adapter bluetooth in the front USB port stays on, too.  After removing the USB BT adapter, the light on the adapter goes off, indicating that the power is off to this USB port.  But PC power light blue is not far away, even when it is disconnected from the wall outlet.  It's as if the machine is haunted.  I unplugged the decision-making and the left that it disconnected for more than a week, but the blue light on the front of the machine never went out and is still on, even if she wavers and seems to fade a little.  When I turned on the rear, the light back to him is normal on State 'blue '.  Power off, blue light stays on.  Disconnected from the plug, light blue stays on.  I'm afraid to leave this thing in the House and will probably trash if someone does not have a solution.  Anyone who has ever seen anything like that?  All my friends of teckie IT are puzzled and suggested I post here to see if anyone else had the same problem.  Don't bother taking repair.

  UPDATE: I removed all devices and low and behold, when I unplugged my BluRay USB drive, the lights are all on the CPU.  I restarted, close, tried to sleep and Hibernate and everything works fine now.  I guess that the BluRay player was watching somehow the CPU to turn it off.  It is a unit that is known for needing a huge amount of energy to function properly.  Naturally, the Blu - Ray player is not get reconnected to this HP PC.   Now I use with my Mac.

• Satellite A - power light turns on but nothing happens

  The laptop does not start. The power light turns on but nothing happens. Before that, error message 0 x 0. has been posted.

  Can anyone suggest what to do?

  Hello!

  It sounds like a hardware malfunction...

  Try this workaround: remove the battery and the AC adapter. Wait one hour and then reconnect the battery and the AC adapter. Now, try to restart the laptop.

  I put t know what laptop you have exactly but if it doesn t work you should go to an authorized service provider. Technicians can check your laptop.

  Good bye

• HP Pavilion dv2000 power light flashing

  I have a HP Pavilion dv2000

  I have a hp laptop, I had problems with the battery with do not load, so I changed the battery.

  now the problem here is the computer will not be stopped unless I have remove the battery. No, even if I press and hold the power botton.

  When I go through the normal shutdown procedure, it all happens but the power light blinks constantly and it will stay like that, unless the block is disconnected.

  Someone at - he never encountered this?

  Windows vista home premium/sp2

  AMD Turion (TM) 64/2 1.80 ghz processor

  1 GB memory

  32 bit operating system

  It sounds like you have a hardware with either the battery or the computer problem (or both since the power button problem occurs when it is connected only to a power outlet as well).  Take the machine to a repair shop of computer with a good reputation for diagnosis and repairs or replacement parts.  I'm all but certain this isn't a problem of software with Vista.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I have a g62 and it is locked. power light is on and the light 'caps lock '.

  We have a G62. It is locked. Power light is on, light traffic and wireless light. The screen is completely blank. Any ideas on how to reset this 'thing'?

  rafburtonwood wrote:

  We have a G62. It is locked. Power light is on, light traffic and wireless light. The screen is completely blank. Any ideas on how to reset this 'thing'?

  Hi rafburtonwood,

  Try a hard reset as follows:

  Remove the battery and unplug the DC power adapter.
  Press and hold the power button for more than 15 seconds.
  Plug the DC power adapter (leave the battery for now)
  Press the power button

  Please post your results here.

  Best regards

  ERICO

• XPS 18 1820 only POST - Power 7 white LED flashes

  Hello

  I restarted my XPS 18 after only an update of Windows 10 (I think that was the case the graphics drivers) and now it does not start.

  No logo, no POST... nada.  Press and hold the power button for about 10 seconds, I can here a subtle click and whir, I think it's the HD fan and processor die.  Then hit power button once again, I see a code flashing on the power light: 7 flashes white, pause, repeat.

  I can't after that.  Connect a USB keyboard and pressing F12 do nothing.

  No difference between supply the stand and plug the power cord directly.

  Any suggestion is appreciated.

  See if the verified answer here contributes to...

• Impossible to find connect them drive HARD Light and Power light after the change of office case - I got my answer

  I changed my case for reason of cooling, and I can't do the power light and the light work of HARD drive on the new case. I searched in vain on the web for the specification of the motherboard. The original HP PC is a HPE 130F. Motherboard is a H-RS880-Μatx (Aloe)
  Manufacturer: Foxconn. I found a few spec but not enough details on connector J18.

  The original front panel connector is an all-in-one type. I found the power switch and the reset light connector J18 but cannot do the work of LED.

  Any help appreciated.

  Thank you.

  CeD_B wrote: I changed my case for reason of cooling and I can't do the power light and the drive light HARD works on the new case. I searched in vain on the web for the specification of the motherboard. The original HP PC is a HPE 130F. Motherboard is a manufacturer of H-RS880-Μatx (Aloe): Foxconn. I found a few spec but not enough details on connector J18.

  The original front panel connector is an all-in-one type. I found the power switch and the reset light connector J18 but cannot do the work of LED. Any help appreciated.

  Hello CeD_B, I'm not familiar with your card connectors mother special façade, however if cables (wires) are inserted in a plastic connector, you may remove the wires and connect them individually. They are usually labeled.

  The son of LEDs for the power switch and the hard disk activity are polorized, which means they have a plus and a downside that should be connected to the pins on the motherboard in the correct polarity.

  If you have connected to power led and HDD led pins on the motherboard and the lights are not just back the sons and the led should light up, and the hard drive activity led should light up when the hard disk is written to or retrieved from the hard drive data.

  While this image is not your motherboard, it will offer an idea of connections pin on some motherboards.

  Search in the second post of this thread.

• DeskJet 932C - the power light is on and the cartridge flashing

  Hello! I know my DeskJet 932C is 'old', but it seems to be in excellent condition.  First time that I had a problem.  The power light is on and the cartridge is flashing.  When I open the cover, the plateau of the cartridge moves to the far left.  The arrow points to the unfortunate color cartridge.  The missed years ago color cartridge.  I use my printer to print B & W, so I've been printing with the empty cartridge in place for years.

  I removed a reinserted the color and B & W cartridges and turn on the power and turns off.  I used the HP print and scan doctor, and it's scan does not have something wrong, I clicked on print a test page, and nothing happens.  The test page is listed as 1 document in the queue.   Status: error - printing.

  The printer has been in its current position on my desk for years.  It was not known of any trauma... None does damage... no power failure.  It's clean.  Has been connected to 4 laptops and uninterrupted service.

  I prefer not to buy a new color cartridge.

  Would appreciate help.  I would like to know what it means and if there is a solution.

  Thank you!

  Focus21

  The printer will perform electrical cartridges to light control and a few other times.  If an error printing can be blocked to avoid damaging the printer.  Clean the contacts of the cartridge as shown in the document here can solve the problem, otherwise you will probably need to replace the color cartridge.  The 932 Deskjet will allow printing with an empty cartridge, but for years, the cartridge may fail electrically and needs to be replaced.

• Equium L40 10 X flashing green power light

  Hi guys,.

  I have an old Equium L40 that I haven't used in a while.

  Now when I plug the power adapter into the power green led just blinks constantly.
  I checked the blink codes, but I can't find one for mine. It simply turns green for a second then off.
  Then green for a second then off the coast and that constantly.

  I tried to remove the battery for a few minutes and then hold the power button for a minute, but I just get the same result. The adapter is one that came with the laptop and as far as I can tell works very well.

  Other ideas would be greatly appreciated!

  Thank you guys!

  Hello

  Indicator power (DC IN) indicates the status of the power supply with the power adapter plugged.
  (Without flashing) Green means supply and the computer is turned on.
  The power light on the front of the computer lights green when the computer is turned on.
  Flashing orange indicates power to the computer while the laptop is in mode 'sleep'.

  Unfortunately, the DC IN green flashing red state looks like a hardware problem.
  Probably the power supplied to the laptop is abnormal or there are a few problems with electronic power on the motherboard.

  By the way: Please check the memory modules live. Blow an and test the device using that one module in each slot. Check the two modules.
  A few years ago, a friend of mine had some problems with the laptop. The flashing light indicates the issue of RAM

• Won't boot satellite R850 Pro - fan snoring; power light cycles; NumLock on

  My R850 Pro Satellite won't start. When I press the power button the power light on the laptop (under the mouse buttons) travels flashing green, green, orange, orange and the snoring of fan. also the Verr Num led on the keypad is turned on and won't go off in such a hurry. The screen is blank and plug a monitor displays a white screen.

  Remove the battery has no effect, the same results as with.

  The hard drive is readable went out and attached to the other pc as external drive using a shopping cart.

  Any ideas on what to try, hope someone can help you.

  Thank you, Carol

  You see a Toshiba splash screen at the beginning?
  You can access the BIOS?

  If this is not possible, a serious hardware problem appeared...
  It could just be a memory, but in the worst cases, your motherboard is the problem

• Satellite A105 - power light lights up but the white screen

  Hello

  I have a Toshiba Satellite A105 and I went on vacation and the laptop was working fine. I ve come back and the power light is on, I can hear the laptop a few noises but the screen remains empty. I tried to connect another monitor to it to try to get out of the way, but nothing seems to work at all!

  Anyone have any ideas?

  See you soon!

  Try this:

  (1) remove the battery and unplug the AC adapter
  (2) wait about 30 min
  (3) reconnect the battery and the AC adapter
  (4) try to put the laptop

  If it does not help I put t see any other solution as to contact the ASP in your country to control the laptop!

  Good luck

• Satellite 2805-S201: AC power light flashes orange 8 times

  Hello

  I worked on a Satellite 2805-S201 and everything was fine until I put a PCMCIA wireless with 3, 3V power.
  After that, the AC power light flashes orange 8 times and recycle.

  It comes with power supply, battery, AC and no battery installed, etc. If I pull out the power plug and the battery and then put both when AC is green and the battery may charge. As soon as I push the power button, I hear a light click on the right side of the device and then it goes into the amber cycling power.

  Bulletins of support mentioned that the card could get damaged, but did not mention the unit itself.
  No, the PCMCIA card is not always connected

  Any thoughts?

  CA

  Hello

  The flashing provides a micro code which refers to the hardware failure.
  But please don't ask me what might mean this code because in my opinion, only an authorized service provider can be read and can check in his manuals and documentations.
  But it is of course, in most cases, it s a hardware problem of motherboard! ;(

  Perhaps the external PCMCIA card was not totally compatible and damages of something on the map but it's only my personal suggestion to ensure what s bad hardware fault diagnosis would be necessary.

• Portege M750 starts no-power light flashes

  I have an orange flash on my power light error code (1 long flash 3 short 1 long 2 short 1 long 1 short)...

  I have to take the power connector on battery and start battery to operate...

  I use image windows 7 Toshiba with all Microsoft updates (now I NEED many to verying reasons so don't grill me again... for example DON 'T SUPPORT MICROSOFT UPDATES blah blah blah)

  What does this code mean and y at - it a Bios Beta above version 3 for these things...

  Any helpful comments would be greatly appreciated...

  Hello

  In short, 0, long ways 1.
  In your case, the binary code is 1000 1001
  Now, we must reverse the binary code because the most significant bit.
  This means that the code is; 1001 0001
  The HEXADECIMAL code means; 91 h

  Error code is 91 h but I n t know what that 91 h means and what role might be affected exactly!

  Eventually it s something wrong with electronic power supply on the motherboard, but only the ASP technician could provide more details
  However, in most cases, the motherboard is affected and needs to be replaced.

  Welcome them

• Portege Z830-10F no display - power light flashes

  Hello

  I have a problem, when Toshiba Portege Z830-10F of loading, the screen is off, flashes of light of energy Green two times two times yellow and repeated, the screen will not turn on.
  What it means?

  (PC was left alone in the night on table)
  I try to disconnect the battery and load without it, it did not help.

  Indicator DC IN (first on the left):
  Flashing orange indicates a problem with the power supply, initially, you should try plugging the adapter into a different power outlet. If she does still not work, please contact Toshiba support in your country.

  ((Deuxieme power light to the left):
  Flashing orange indicates that the computer is in mode 'sleep' and that there is enough available power (mains or battery adapter) to maintain this State. In sleep mode indicator lights for a second and off for two seconds.

  Also try this.
  Remove the battery, disconnect the adapter, press and hold the power button / stop along 30 sec.
  Now connect the battery and AC adapter and turn on the device.

• Qosmio F20 won't start - power light flashes orange

  My Qosmio F20-149 crashed yesterday and I was not able to get it working again. When I try to turn it on, the power light flashes on and outside (on: 1 sec, off: 1 sec) and the cooler fan operates at full power. When I press a key, there is a genre or a sound error. otherwise no reaction of the laptop; even the CD player does not open.

  I did no RAM-implementation to date, and I use the original power supply Toshiba. I tried from the laptop using only the battery, only power and on both. No change in the reaction. I tried all possible combinations (with a free one, both... etc) of my two cards, RAM (512 + 512) and still no use.

  I am really puzzled.

  If I understand you just your laptop sends a blink code. Copy the following code appears so laptop has detected a problem with the electronic power supply.
  In this case, there is nothing that you can do and the laptop must be sent to the service provider allowed the closest.

  They have manuals containing instructions and the exact description of the code how do I solve this problem.
  Sorry, buddy, but I do not think that anyone here can offer an accurate diagnosis for that matter.