HP jet pro 8620 desktop

Similar Questions

• HP jet pro 8620 desktop - printing on envelopes #9

  I'm trying to use my hp pro 8620 office jet to print from microsoft word 2010 #9 envelopes for a project to raise funds for the non-profit I work. I get an error that says the difference in size of paper because even if I get a custom default to #10 envelopes paper size. Is it possible to substitute the paper size mismatch error printing anyway?

  Hi akilpatand thanks for getting back to me!

  The #9 envelope does not appear in the specifications for a type of paper supported.  Supported envelopes are #10, Monarch and 5.5 bars.

  I would, however, use this document as a workaround:

  Create Windows 7 custom paper sizes

  Please hold me!

• Office Jet Pro 8620: No Assistant HP printer or Application icon

  I'm under 10 64-bit Windows and the Office Jet Pro 8620.  I can't configure my scan-to-email of the printer (continues to request a code).  My printer is connected via Wi - Fi, and otherwise works fine.   Following the instructions of support, I tried the Printer Wizard, but there is no such program listed in my HP folder and no printer the Office Assistant icon (although there used).

  I downloaded all the updates current and running Scan Doctor several times.  No luck.

  Any help is appreciated.  Thank youl.

  Hello, GreenTurtle,

  Thanks for the quick response.  I followed your instructions.  After disconnection of the wireless connection and then the wizard of wireless, all re-installed configuration correctly.  The appropriate icon appeared on the desktop and I was able to put everything in place.

  I am very grateful for the help and quick response!

• Office jet pro 8620: should I disable the printer without cartridge installed?

  I removed the original HP ink that was defective and took it back. Now I have the inkjet (Office jet pro 8620) without cartridges installed. The printer says not to disable so that it does not get damaged but I'll be away for a week and want to turn the printer off. I will cause damage if they do?

  Thank you. I guess I'll have to keep on like this for a week then. Too bad.

• Office Jet Pro 8620: Office Jet Pro 8620 offline

  Printer goes offline that every time computer is turned off.  Was able to get online by power off and restart the printer.  Now, nothing works to get back online.  Internet service provider recently made some changes to my router.  When I run the wireless network Test results and the network of the printer Configuration Page, everything looks ok.

  Hey @jrinop,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with printing of 10 Windows PC to your Officejet Pro 8620 e-all-in-one printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. In your search type in printers bar and open devices and printers.
  2. Right-click on any icon of your printer listed.
  3. Click on remove the instrument.
  4. Repeat for any other icon of your printer listed.
  5. Click Add printer, and follow the prompts to add a new queue for your PC.

  Please let me know if you are able to print after doing the above. If you are, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP jet pro 8610 desktop: copy and printing paper side 2

  How can I copy and print a 2-sided document on a single page?  In the copy dialog box I select 2-sided copy but only one side of the document prints.  The duplex unit is installed.

  The 8610 Pro Officejet can't stand not automatically copy the back of scanned documents, the scanner in this model does not support the two faces of scanning.  Copy for the 8610 options include the following:

  • 1 original ratings for 1 copy face
  • 1 original 2 copy face sides [a pile of a front loaded in the ADF file originals will print 2 copies faces.]

  The 8620 Pro Officejet and 8630 support scanning or copy automatically two sides of a document, options copy for the Officejet Pro 8620 include the following:

  • 1 original ratings for 1 copy face
  • 1 original copy side 2 side
  • 2 original faces to 1 copy face
  • 2 original faces 2-sided copy

• Office jet pro 8620: office jet pro 8620 very slow to print

  what I can do to solve this problem, very slow printing: my printer has taken 1/2 hour to print 6 pages, only bought a few weeks ago.  I can't find a solution. I will try the solution on the post of Shawn D, b (ie the replacement driver), but nothing is selected on the page of time. therefore impossible to remove until I know what to delete!. can anyone help.

  Robyn

  Robyn

  Hi @ratts,

  I see that your HP Officejet Pro 8620 is very slow printing on Windows 8.1. I'm happy to help you!

  A few questions for you, if you don't mind:

  • How is the printer connected? Wireless, Ethernet or USB?
  • The same speed occurs when you print a test page? Video: printing a Test page with the all-in-one HP Officejet Pro 8630. (The same steps apply to your HP Officejet Pro 8620).
  • The same speed occurs when doing a copy? Copy the text or mixed Documents.

  In the meantime, please see this post, Re: HP 8620 seems slow printing, by my colleague @Rainbow7000.

  Hope this helps, and hope to hear from you soon!

• hp jet pro 8610 desktop reset language

  Just bought a HP Office Jet Pro 8610 (during the last hour!).  Initial turn on... the language of other than English error... How can I reset it? because I don't understand the language!

  Hello kachmica,

  Welcome to the HP Forums!

  I understand that your Officejet 8610 is in the wrong language. I will do my best to help you! Unfortunately, you will have to go through the installation program. You can change the language, once the ink cartridges are installed and prints the alignment page.

  I recommend the continuation of this HP document on implementation of the printer (Hardware). I know that your printer is in another language at the moment, but try to follow it. You can continue to press the next button until what it shows you an installation of ink cartridges image.

  Once you complete alignment, your printer will be in another language. Follow these steps:

  (1) slide your finger on the screen to go to the second page. Press the gear symbol (Setup)

  (2) touch the first menu that appears on your screen (configuration of printer)

  (3) touch the second menu (language), then tap English

  Please let me know if you have any other questions. Have a great day!

• HP jet pro 8600 desktop

  you just bought the jet office pro 8600.  I want to go to eprint request my code but I can't.  a help

  Becky

  Hello

  Please watch the following video (4 minutes), you will certainly find the printer code after:

  http://www.YouTube.com/watch?v=gcT1J0PM06k

  Kind regards.

• Office jet Pro 8620: Office jet 8620 prints more wifi

  Hello!

  My printer was in a wifi network and worked flawlessly for 8 months.

  Now, it is invisible to all the computer connected to the same wifi network.

  I already entered the service menu and I have already made one: partial and semi full reset.

  [content removed]

  I need a FULL / HARD reset! As in the conditions of the factory restore!

  How can I do?

  The printer can use wifi network! No Ethernet cable or usb!

  Thank you very much!

  Hey @Pm2r,

  Welcome to the Forums of HP Support!

  I understand that you are experiencing some problems with printer e-all-in-one Officejet 8620 communicates is not with your PC. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. Turn the printer off.
  2. While the printer is turned off, disconnect the power cable from the back of the router for a minute.
  3. When the lights come back on the router, turn on the printer.

  Now, on the printer, click on the wireless icon that looks like a radio tower.

  • If you see a line indicating the status: not connected, the printer is not connected to your wireless network. Click speed, wireless and Wireless Setup Wizard to connect the printer to your network.
  • If the IP address starts with 169, the printer is not getting a valid IP address of the router. Contact which provided you your router to determine why the router is not getting an IP address valid.
  • If the IP address of the printer starts with 172, the printer is connected to a network of comments. Contact those that you provided with the router for assistance with deactivation of the feedback network.
  • If the IP address of the printer starts with 192.168 or 10, the printer is properly connected to a network. Please see below.
  • If the IP address of the printer begins with any other number, the network is maintained. Contact one that keeps your support network.

  At this point, you should be able to print wireless. If you still can not, on any device that prints the PC enter the IP address of the printer in an address bar. If you are able to access embedded web page the printer, please let me know.

  Please let me know the results after following the above. If you are able to print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Office jet Pro 8620: documents MultiPage, automatic two-sided scanning, an automatic document feeder to 50 pages.

  I just bought a HP OfficeJet 8620, who says that he will "Break through with automatic double-sided scanning multipage documents and an automatic document feeder to 50 pages." I can't find a reference to such an operation in the user manual and seem to read thet, others have not been able to do. Before I take the trouble to unpacking and to establish this printer, can anyone tell me if the printer can do this duplex auto scanning and if so, how?

  Hello

  Yes, he can do an ADF duplex scanning using the screen of the printer or the HP scanning software.

  Kind regards.

• 8620: could not start scan to HP Office Jet Pro 8620 since the upgrade to Windows 10

  I've updated to Windows Home 64 bit 10.

  I can scan if it is started from the PC to the HP printer Assistant.

  But impossible to start a scan of the front of the printer 8620.

  It times out and gives errors

  "The analysis has failed in one or more of the following problems

  -connection to the computer is lost

  -L' scanning on the computer application is currently in use

  -Application OCR is not installed on the computer

  See the computer for details screen'

  Nothing is displayed on the computer screen.

  How to do a scan to work on the printer without initiating the PC?

  this to go to JohnGPB solved my problem

  22/08/2015-12:18

  Hey there,

  One thing before you start, this solution won't work for (its of course HP) inkjet printers
  Try the next step, I believe that this will help you overcome the problem.
  1. start by dissconnecting the USB cable. (If its connecetd wireleslly, go to the next step)
  2 remove the printer driver of "devices and printer" which is located in Control Panel.
  3. download the complete solution for your printer.
  4. extract the contents of the file. (Using winrar or any other method, you know)
  5 open the "Utils" folder and choose in the "x 64"(ou le «x32"encas vous utilisez ce type de système) subfolder, you should be able to locate a file called 'RemovePreInstalledDrivers' > once you open this file black screen opens, wait for it to close, then move to the next step.". "
  6. go to the main folder where you have already extracted the software and right click on the file x 64.msi (name is most likely your printer model), then choose the Option "repair". > Subsequently, you will be asked of preformed a reboot. (Incase you will get a Messege saying "this action is only valid for products that are currently installed" simply double-click the file instead)
  7. after rebooting, the head in the drive Local C/ProgramFiles/HP/PrinterModelFolder/bin/USBSetupL uncher (or DeviceSetupLuncher if his wirellesly connected) and double click it.
  8 follow the steps for you and connect the USB cable when you are invited to (if the wireless sound just choose the wireless option)

  Who should add the scanner to your imaging devices.
  Best Of luck ~

   

• HP pro 8620 desktop: scanning problem

  Just installed my downloaded software 8620, according to the instructions on the cd.  HP scanning icon still appears on my dock. When you use it to analyze it gives an error to check the device; However, the device checks is my old hp 5610.  How can I change this?  I can scan on my mac from the control panel of the printer.  Thank you in advance.

  Hello

  Place this HP scanning icon to the trash and empty the trash.

  Then, install the application HP Easy Scan from the Mac App Store, which is the latest version of the HP scanning software.

  Which can be installed from the link below:

  https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12

  Now open the Applications folder and launch the HP application Easy Scan, please let me know if allowing scanning as expected.

  Kind regards

  Shlomi

• Office Jet Pro 8620

  I got a 8600, where everything I scanned is entered in an analysis in my documents file, now with the 8620, all scanned documents go directly into my documents, how do I configure so that scanned documents go straight into a digitized documents folder?  I could not find or understand anything in the help guide.

  Thanks for any input.

  Hello

  When you click on "scan a Photo Document or", click "Advanced settings". You can see a lot of options in the tab "Destination." You can change to any place in "save the location.

  Kind regards.

• Office jet Pro 8620: Officejet Pro 8620 HP software required for the Scan of the computer could not be located on this computer

  
  

  Ah, the good panel: Tou has chek ANYWHERE...