HP Laserjet 4000 t printer: Laserjet 4000 t false jam - Attention light stays on

Similar Questions

• HP laserjet 2200dn: false jam hp laserjet 2200dn

  I have a laserjet 2200dn which worked very well so far.  Tried to print an e-mail and all three lights are solid lit.

  There is no jam.  I turned off hard twice for more than 15 minutes each time.  Printer cycled through its normal and is starting operation went to normal sleep both times, then entered the error condition when told to print.

  That essentially means it was one or a 49 error 79, he interprets as a trainer.

  Sometimes when you print a file that causes this problem if you are using a postscript driver, it will work, or if you have an option to print TrueType fonts as bitmaps in the driver settings.

  Since you are using a Mac, it is likely that you are using a PostScript driver, but I'm not familiar with your operating system.

  If my post is solved your problem and click the accepted as button solution under him.

  In order to thank a Tech for a post click the thumbs up button under the post.

  You can even click on the two keys...

• Samsung ML2525W printer does not print, the Red toner light stays on. Replace toner, no change.

  My Samsung Laser printer is less than a year.  I rarely use it.  The red light by the symbol of the triangle (cartridge toner according to manual) came and I was no longer able to print.  I have replaced the toner with a new one cartridge, printer and USB for PC connection and turn it back on about two or three times.  No change.  I even opened a 2nd (new) toner cartridge and replaced thinking one of my 2 new ink cartridges could be a dud.  However, still no printing and the red light stays on.  Any suggestions?

  Hello

  I see that you mentioned that the printer is less than a year, so I would recommend that you contact the manufacturer of the printer to help. The issue seems to be with the material.

• A9J40B: New printer: HP Envy 5530 transport Jam/Paper Jam

  I just purchased and received this printer. After the installation of the configuration and installation of the printer, he tried to print a report, but it will never work.
  He guard sends me errors and says that there is a blockage of the cart. I looked inside everywhere but this is a new printer and it seems perfectly clean. Its power to seize a white paper and then spits white. It keeps eating all the paper and sometimes give an error. I can continue or clean all that I want, nothing seems to help the problem. I tried the wizzard but he said all right and I need to print a status report, but I can't.

  I really hope I will get this problem solved, because this is a new printer.

  Greetings, tnx in advance, Jasper.

  Hey @Sjappie84,

  Welcome to the Forum from HP Support.

  I understand that you encounter some false jam errors on your HP ENVY 5530 e-all-in-one printer.  I would like to help.

  This is what looks like a brand new printer, I recommend that join you our technical support team. You can click on the following link to start a business: www.hp.com/contacthp/

  Once you complete the form online to build your business, you can choose among different means of direct contact (email, phone, chat).  This will be your best option to enjoy your printer warranty options.

  I hope this helps.  Have a great day!

• Photosmart 8450 - "transport print cradle is stuck clear jam, then press ok.

  AAACCCKKK!   "transport print cradle is stuck clear jam, then press ok" is the message I get.  I have no jams, I see.  I did a soft reset and a hard reset nothing helps.  Help

  Thank you very much for your time, I know you're probably pulling your hair with all the snot and boo hoo...  But I solved the problem myself.  I'm not a fan, or I'm a computer nerd of 'wannabe '.  I've been in this business for 18 years and has 3 stores myself.

  I certainly appreciate all the time you've taken this problem!  Congratulations are simply not enough!

• LaserJet CP1525: Laserjet CP1525 generates errors 'paper jam' on almost everything I print and there are no jams

  Hello everyone, I have a Laserjet CP1525 who I am troubleshooting for a colleague, and no matter what we do whenever we try to print, we get "paper jam in tray 2" "clear jam and then press {OK}."

  I checked this printer up and down and everything autour and there is no jams, there is not a coward or a sheet of paper, the platters, and linings are very clean, I opened all the doors on the printer, but we still have this isse. Toners are all fine, black, it becomes weak, but it is quite the impression that I was able to print a single test page.  I don't know what else to do. Any help is greatly appreciated.

  Thank you!

  How old is this printer.  How it was used.  On this engine, I saw a lot where the roller is worn and it won't pick up the paper.  The roll is kind of a pain to change, but on what I laid out with this issue, once I have change the roll everything works fine.  Remove the tray paper and printing tilt up and with a flashlight he will shine on the roll.  Do not touch the roller.  There should be steps on the roll that you can see.  Most of the time there are only steps on the outside or the inside only and the rest of the roll is smooth.  If this is the case, you will need to change the roll.

• HP Laserjet CM6040MFP always paper jam on the fuser unit when full photo in plain paper printing

  Hello

  My office using printer HP Laserjet CM6040MFP, but I have the problem.

  The printer paper always jams on the fuser unit when full photo in plain paper printing. I didn't know why, but this problem occurs on another printer of the same type.

  Please help me

  -Product name: HP Laserjet CM6040MFP Q3938A

  -Operating system: Windows 7 64-bit

  Kind regards

  Milannerz

  Hello again-

  I am pleased to learn that the passage is a practical solution for you.

  The other possible solution which seemed to be a finding a setting under print quality-> Optimize-> light Media and put on IT.

  I don't have a CM6040MFP to check this setting, but it's just an alternative to consider.

  Personally I have found that a high coverage near the leading edge of the media, some printers can sometimes cause an increased rate of jam.  So I think that your shift is a viable solution.

  Good luck!

• Printer HP 1025NW color laserjet - damage of paper jam

  Two pieces of plastic fell out of door back when it was opened to remove a paper jam.

  Does anyone have a photo from the maintenance manual indicating where these parts must be installed?

  Now, the back door opens when the printer is running.  I guess they have to do with the back door closed locking or adjustment of the spring pressure on the black roller at rear.

  One piece is black and the other is white.

  Thank you

  

  

  I looked in the user manual and illustrations only and reference is made to the access door back on page 116 jam that addresses by removing a paper from the printer. Since it is a hardware issue, I would call into HP Total Care. The USA and Canada customer number is 800-474-6836. Other clients can find the contact information here. I hope this helps.

• LaserJet Pro M201dw: Flashing the power light on LaserJet Pro M201dw

  When my M201dw Pro LaserJet is in standby or energy saving, or what you call mode, the white light in the power button blinks slowly.  It's annoying when the room is dark and you look at the video or something.  Is it possible to keep the dark machine?

  Hello @wrecksx,

  This is a great place to visit for a community support and HP! I see that the power LED flashes when in stand bye mode and you want to know how to stop. I would like to help.

  It is a feature of the printer when in sleep mode, the power LED flashes to warn that the printer is in sleep mode. When you touch the screen the power light goes back to a solid light. There isn't any way to change this feature.

  The printer should be turned off, unfortunately.

  If the issue is resolved, your welcome to show your appreciation by clicking on "Accept as Solution" and the "Thumbs Up". Let me know how make you out. Thank you.

• LaserJet P4515: LaserJet P4515 multiple paper jams

  Jam LaserJet P4515 continued in multiple locations, fuser, under the path between two tray and toner cartridge and toner area. Maintenance Kit life of 67% left, rolls have been changed, toner has changed, the vacuum cleaner, wipe with the cloth to dust and used air canned.  What else could we do?

  I searched on the OUTPUT of the fuser, PAPER END JAM and found a post indicating all food guide could be the problem.  After replacing the part (whole food guide) on Monday, there were not additional paper jams.   Thank you for your help.

• Color LaserJet CM2320nf: CLJ CM2320nf false jam

  Hello world

  I just got a used (new to me) CM2320nf CLJ. It came without the ink cartridges.

  I found a used set of cartridges HP OEM with enough life in each for me to see if I can make it work.

  When turned on, it makes initialization and then in a cleaning cycle. But I get the clear paper jam in tray 2 message. But, I can see there's no signal no matter what paper at all. I don't know what happened, but it is now asking me to load paper into Tray 1 for cleaning. This pulls at least in the book but it jams and then above, "jam-access status bar."

  I also tried "restore it to factory settings" and reset the "NVRAM", but this doesn't seem to help.

  If I remove the tray 2 paper and look inside I see picking up the wheel and it seems to need cleaning.

  

  So my questions are:

  • Should I just replace the rollers or can they be cleaned? If so, how can I clean them?
  • It seems that if I go into cleaning mode is now applying for me to put the paper in the Tray 1. He thinks that I have no paper in tray 2? How can I tell the printer to review in tray 2?
  • Are there certain parts that tend to focus on this model or questions, I need to address?

  And of course, do not hesitate to ask if I have not provided the necessary information here.

  Thanks in advance!

  Larry.

  I guess your post, as printing other pages. If so, you can update the firmware, because this report is built into the operating system of the printer. As long the other elements are print and if the printer is connected to a network, then you can get the supplies status from the web interface.

• HP LaserJet 600 M601: paper jam / error

  After printing a few pages of a file, the small screen on the printer shows 59.05.60 error. It also dictates Continue turn the printer power off & then on again. But even after turning off & then again the same text 59.05.60 error comes up with the same statement Continue turn the printer power off & then on again. Sometimes also paper jamming occurs. Very frustrating; don't know what to do.

  I think that it is a problem engine drum.  Sometimes, the problem may be the toner cartridge.  To test remove the toner cartridge and the printer.  It come from the error or he asks of the toner cartridge.  If it's the error the drum motor must be replaced.  If he asks you the toner, put it in and see if the error.  If not chances are the drum motor still has a problem, but if you have another toner even one that is empty, put it to see if the error is not there when you turn the printer on again.  You can also go to the diagnostics menu under the menu administration and then component and the test with the removed toner cartridge engine.  If the test fails which will confirm that the engine needs to be replaced.  If the error has just occurred with the recent replacement of the toner cartridge, chances are that the toner cartridge is bad with the drum being seized preventing the engine from running.

• When you print a photo, the image is too light

  Original title: copying photos

  I copied a picture but when it printed he was pale with barely any color!  my laptop is new. I have not had any problems with my old laptop with the same printer.

  Hello

  1. What is the serial number and model of the printer?

  2 Windows operating system you are using?

  3. what application you use to print photos?

  4. What is the format of the photos you want to print?

  You can read the following article and check if it helps.

  Printer in Windows problems

  If you are using Windows 7, you can also consult the following article:

  Picture printing: frequently asked questions

• HP printer Envy 4500 does not share print and else, says paper jam

  Just bought HP Envy printer 4500 which is supposed to print on both sides.  I put a copy of a document of two faces in the place where the document is supposed to copy.  I put the function copy, black ink, 2 Facer.     Then, I pressed 'start' and a copy out of feeder.  When I pressed on the two long side once again I get the message 'paper jammed' I called HP and Best Buy and nobody can help you.  HP support says paper I use is the cause.   Excuse me, but this is a multipurpose with 96 bright paper, 20 lb.   Best Buy tech told the paper or the paper type has nothing to do with anything.    I wanted to only two printed sides to save paper, but I can't live without this feature.

  But, for the record, I learned the machine is faulty by Best Buy and return.   I don't think it's paper or defective.   What do I do and where can I find the explicit directions to copy both sides of the paper.  No computer!

  Hello

  The procedure:

  • Press copy,
  • Touch 2 faces
  • Touch black or color

  Now the printer says «face...» "It will copy the first page, do not remove paper.

  • Turn the paper on to the second page (or put the second page on the glass).
  • Press ok

  It will copy the second page.

  Kind regards.

• OfficeJet 6700: Printer wrong paper and economicus jam

  Hello.

  First I'm sorry for my bad English, I hope that you will understand me.

  my printer suddenly started to take the book evil and cause a jam whenever I feel.

  I cleaned up the jam, checked for any other piece of paper inside and reset to the printer.

  In addition, when I finally managed to make a document correctly, when he attempted to reverse and print on the other side, it jammed again.

  is there something I can do or should I go and buy a new one?

  Thank you!

  Ohad.

  Welcome to the HP community @ohadalush,

  I understand that you are getting paper jams on your HP Officejet 6700 Premium. I'll be happy to help you.

  Below, I've posted a link to a document that offers solutions of troubleshooting on this issue. Please try all the steps in order and get back to me with the results.