HP Laserjet cp1525nw: BlackBerry Passport Printing

Similar Questions

• Color laserjet CP1525nw will not print in color

  I installed the PCL6 and PostScript drivers on my Surface Pro 3 to print to my LaserJet CP1525nw color.  The printer is connected to my router.  The printer prints, but only in shades of gray.  What can I do to be able to print in color and continue to print through my router?

  My printer is connected via USB. I installed the full version of the software, and everything works now. Thank you!

• My Laserjet CP1525nw disconnects frequently and does not print. What should I do to put online?

  I recently bought a LaserJet CP1525nw color printer. Firstly, I have established a wireless connection, via a router, with an Acer PC (Windows 7 Professional 64-bit operating system) using the CD of the printer by following the guided procedure and with attention to connect the USB cable when asked me to do. The printer worked very well. Then I installed the software in the CD for the printer on an Asus PC (operating system Windows 7 Professional 64 bit) who was in another room of my house and establishes a wireless connection between the Asus PC and printer. During the installation I was not asked to make the connection with the USB cable. I was able to print from the PC Acer or Asus PC regularly. Finally, I have a wireless printer on my laptop (operating system Linux Ubuntu 12.04 32 bit) using the HPLIP software. On the PC the LaserJet has been set as default printer. Printer LaserJet printed all three PC regularly. I left the printer. The next day, I try to print but I did not do it from a PC. The printer display showed 'Ready' and the correct printer (192.168.1.7) IP address. The blue led is on continuously. However open the control panel of the printer on the PC, I realized that the printer is offline. I tried to solve the problem to read the guide to the printer, but I wasn't able to find any suggestion. PC Acer and Asus have firewall Windows is activated and installed AVG antivirus. The netbook nothing. On the Acer PC, I uninstalled the printer and do a new installation using the CD for the printer. After this operation, I was still able to print from a PC, but the next day, the printer was offline again and was not able to print from a PC. Really, I cannot understand what is happening and should deeply grateful to receive any suggestions on your part. Many thanks in advance and best regards. sdrrmit

  This article should help to keep the Wi - Fi connection and solve problems in offline mode:
  http://support.HP.com/us-en/document/c02817031

  Give the steps described a try and tell us if it helps.

  Good luck!

• Printer driver LaserJet CP1525nw moved

  All of a sudden my Laserjet CP1525nw color printerdriver reinstall on a USB cable. Technical support is unable to find the problem. I also cleaned my registry and my hard drive but nothing helped. I rarely meet driver problems and have never had a printer driver install fail. Can anyone provide any indication this problem?

  I'm under Win. 7 (32-bit) on a desktop computer.

  Hi Ron,

  You are right, it would be something in the operating system at the origin of the problem. Unfortunately I can't help you with issues related to your operating system. The only thing I can say is that you back up your data on the hard drive and then reload your OS. I'm glad to hear that you were able to successfully install the printer on your computer and the other computer. Have a wonderful weekend.

• HP LaserJet CP1525nw color print quality problems

  I got a HP LaserJet CP1525nw color about 2 months ago. After about 4 weeks, I noticed a print quality begins to degrade. Black started first by streaks and fading. Now when blue prints starts to show streaks and melted a magenta pink. All cartridges are at 50 percent of capacity or more. Any ideas about what to check?

  Hello Graf213,

  There are a few things of different which could cause print quality begin to deteriorate on printouts. My guess is that the printer may need to be cleaned and / or calibrated.

  Troubleshooting HP article addresses print quality issues, and provides for the issue of many resolutions.

  Solving print quality problems

  Perform the steps, and I would like to know the results.

• Enable Web Services on HP LaserJet CP1525nw

  We are trying to install web print on HP LaserJet CP1525nw service.

  This is a printer over the network from a server windows server 2008 R2 for Windows 7 x 64 machines

  It is connected to a network wired and all (printing etc.) works execpt WebService.

  We manually set DNS 8.8.8.8 and 8.8.4.4 secondary and restarted dns

  We also have white listed IP of the printer on the firewall, so it has access to the internet through the network without be filtered. (Did anyone know what are the IP address for the web services on the HP circuit?)

  When access us the printer using its IP address and go to the configuration of Web Services and click on 'Activate' it is on the screen for about 2 minutes and does not

  "Connection check connection error".

  Any advice is much appreicated.

  Success his works now!

• HP Color LaserJet CP1525nw: Can't get CP1525nw connected to the network wireless Netgear Nighthawk x 6 R8000

  I have never been able to successfully get the printer installed by wi - fi with any stability, so we always connected via USB and shared. I bought a new router and would like to be able to print to this printer wireless anywhere on my network. I can't out of connected mode and mode wi - fi printer. Your software crashes, crash facilities to half way through. The printer indicates an IP 169.254.xxx.xxx, if the network is aware, but it's I can get. None of the HP tools will run under this operating system, they hang immediately upon launch. It's frustration none! Someone out there was a bit of luck with this printer!

  Dell XPS 8700 16 GB of RAM

  Earn 8.1 (64-bit)

  Comcast TG862G Gateway (POS)

  Router wireless Netgear Nighthawk x 6 R8000

  HP LaserJet CP1525nw color printer range

  Hi @jrmunn ,

  I want to help you get the printer works on the wireless network.

  There are a few different ways to install the printer on the wireless network.

  • Thanks to the support WPS.
  • Through the installation, by connecting the USB port, it will configure the wireless.
  • Once the USB installation is done. You can configure the wireless via an Ethernet connection.

  Cycle power to the router.

  First, we must restore the defaults on the printer.

  Press the OK button on the printer, go to the service, and then select restore default settings.

  Print a printer configuration page to make sure that the IP address and SSID are erased.

  Print a Configuration report.

  Uninstall the printer software.

  WPS configuration method:

  To connect your printer to your wireless router wireless using WPS:
  (your router must support WPS)

  Start the mode of the WPS button on your printer.
  Within 2 minutes, press the WPS button on your router.

  Then run a printer from devices and printers Add Wizard.

  The USB method:

  Perform a clean boot on the computer and disable the Antivirus software and any analysis in real-time in the Antivirus software also. How to perform a clean boot in Windows.

  Then run the installation immediately after connecting the USB cable, follow the steps described in this document to update the drivers so that's not new error. A fatal error during Installation of the software. Then the installation should continue. (you can use this procedure for any type of installation)

  If you are still having problems and you have an Ethernet cable, we can install the printer as a USB connection again and then configure the printer via wireless Ethernet.

  Method of Ethernet:

  Restore the default settings of the printer.

  Connect the printer to the router with an Ethernet cable.
  Wait about 1 minute and the printer must have a valid IP address.
  Print the configuration page to get the IP address of the printer.
  Type the IP address in the address bar of Internet Explorer which should open the printer's built-in web services page.
  Installing wireless over here now.
  Click the networking, wireless on the left, fill in information about the network and apply the settings.
  After the confirmation, then disconnect the Ethernet cable.
  Now you should have a flashing light on the printer in 1 minute wireless about.

  Print a printer configuration page, to get the new IPv4 address.

  Then create a new port with the new IPv4 address.

  In the devices window and printers, click right on the printer and on the left, click on printer properties, select the Ports tab.

  Click Add Port, select the Port TCP/IP Standard, then New Port and follow the instructions in the wizard.

• Change the language on Laserjet CP1525nw

  My tongue is currently set to Czech and I don't know how to change the language to English on my LaserJet CP1525nw settings

  Hello

  Babou click here 2 - 3 times on the Cancel button to ensure that the printer will display its main screen.

  Click the arrow to the right 3 times, and then click the OK button twice , and the list of languages should appear on the screen.

  Kind regards

  Shlomi

• HP Laserjet 2840: HP Laserjet 2840-custom color print after Windows update.

  I updated my Windows 8.1 operating system (64-bit) with the provided updates, automatic updates of Windows, about two weeks ago.  After that my HP Laserjet 2840 will not print anything in color.  It copy in color, so I know that the printer still works.  Ayone have any ideas as to why this happens, and yes I tried to reinstall or update printer drivers provided on the HP website.  Still does not work and want a solution or I will throw this printer out the window, literally and buy something new that works with 8.1.

  Updated - with the help of the forum search on another HP Color LaserJet-cannot print in color - I used these steps in this post to solve my problems of color printing.  Please keep this forum so valuable to others who have questions and need to find solutions.

• Problem with printer Laserjet 4 M Plus printer

  I have a Laserjet 4 M Plus printer which I had connected directly to my office with Windows 98.  The printer worked fine with the office.  Well, I've upgraded the desktop of Windows XP and now I can't the printer to print at all. The printer has been added to the desktop, but it will not print a page to test the computer or any program at all.  Your help is greatly appreciated in getting my printer works with XP.  Thank you!

  Message edited by cvanderhoef on 12/21/2008 13:28

  Let this step by step, as we do for the 1st time

  1. set up your printer (cords & cables)

  2. turn off the computer

  3. connect the parallel cable or usb

  4 turn on the computer

  5. turn on the printer

  6. place the disc in

  or install from windows printers list

  Download of HP or

  7. open the folder "default" printer

  8. check the cable port

  example: printer properties

  tab select "Ports".

  9 look for ports using its

  the ports are: "the LPT1 printer Port:

  "USB: printer name?

  Make sure that the port is checked in the box of

  10. click on the "General" tab > "printing preferences...". »

  11. Select "advance" tab tick to set lower resolution

  that i had this problem on one of my printer

  because the high resolution would never print

  12 OK and test print the printer if successful

  13. click OK final

  14 perform the normal functioning of every day as everyday u

  15. good luck

  Message edited by rickp400 on 06/01/2009 12:49 AM

• LaserJet 1022 don't print Windows Explorer 9

  LaserJet 1022

  Windows 7

  When I have updated to Internet Explorer 8 to 9, I can't print with my Laserjet 1022. This printer works with all my other programs.

  I get the following error message: an error has occurred in the script on this page.

  Line: 2126

  Char: 1

  Error: Unexpected call to method or property access.

  Code: 0

  URL: res://ieframe.dll/preview.js

  It looks like IE9 dislikes the print driver for your printer. The fix for this would be to uninstall IE9, or use a different browser like Chrome or Firefox (both linked below). A solution would be to use a different print driver for the printer. These instructions are below. I don't know which driver will work as a good replacement then you may need to try a few. Hope that helps.

  Chrome:
  http://goo.GL/MAqrN

  Firefox:
  http://goo.GL/7ICv2

  To use a different print driver for printers HP with Windows 7:
  1. click on the start menu.
  2 click devices and printers.
  3. right click on your printer.
  4. Select printer properties.
  5. click on the Advanced tab.
  6. click on new driver.
  7. click on next.
  8. Select HP in the first list.
  9 select a Laserjet driver form the list. You may need to try several to find a working one.
  10. click Next.
  11. click on finish.
  12. click on apply.
  13. click OK to close the window.

• HP Laserjet CM1415fnw does not print wireless

  Original title: HP Laserjet CM1415fnw

  My printer has stopped printing wirelessly from my PC (but prints OK when connected with a CAT5 cable). My PC is connected to the router (BTHomeHub) wireless, I can browse and enter in the config. My printer says it is connected to the router with the identifier SSID is correct and past Network Test Wireless HP on all points. I got the impression of having a fixed IP address in case it was a DHCP problem and a static IP address reservation in the router. However, in the router settings advanced, the router says the printer is not connected and I cannot ping the router from my PC. It was working fine until recently. Any ideas? THX.

  Hey Kevin,

  What version of the windows operating system is installed on your computer?

  Refer to the steps in the following article and check if it helps.

  HP Print and Scan Doctor

  Printer HP LaserJet Pro CM1415fnw color multifunction - software installation of the product on Windows for a network connection Wireless (via an Access Point)

  Printer in Windows problems

  Keep us updated on the status of the issue.

• LaserJet CP1525nw: Claer'style Wireless configuration - Laserjet CP1525nw

  I had to replace a router in a neighbor's House, they used the object connected wireless printer.  The new router has forced me to change the password for the connection Wireless which was previously used.  The same SSID IS used on the router again.  I tried all attempts to reset the network settings on the printer, and whenever I do, and then repeat the wireless configuration, whether through WPS, PIN or CD-ROM and USB cable, in all cases, the connection fails and in the best case said security password is wrong or in the most serious cases that the printer is NOT the CORRECT wireless network.

  More bizarre, set part aside from the absence of a solution on the forums of HP, or in the manuals, is that the printer keeps picking up an odd-ball, "HPCP1525-135f8d" SSID, mode is ad hoc and the INVESTIGATION period comes up with a "fake" number that does NOT correspond to a local network, 169.254.123.35.  I've seen IP like this before on the PC NIC cards that can not connect, I think that it's some sort of IP assigned internally, not any network device.  That combined with the fake SSID, I am convinced that the printer is at the origin of these BAD configuration data.

  I tried to manually set the IP address, using a reserved IP address on the router that I've set up just for this printer.  Still nothing, it fails to connect, and collects and records this bad SSID and IP.

  How the h * ll get you the NVRAM on the printer to remove this IP and FORGET that SSID?

  Don't tell me to re - run the installer, I tried several times, which can temporarily erase data, but by re-running the installer again collects and RECORDS the wrong configuration data.

  My best guess, and another solution that cannot be found ANYWHERE, is how do you do a HARD reset printer factory?  I had about my fill of the usability of these interface software and setup of HP!

  Help!

  I found this on a post above and it works for the person.  You must first connect the printer with an ethernet cable to your network router properly available ports and then follow the instructions below:

  The non-taureau * beep * way to Setup your HP CP1525nw for Wireless Printing

  1. 1. Connect the printer to your router via an ethernet cable.
     2. At this point, you will need to navigate through the LCD keys and a printer to the network installation. It is a simple menu tree that you access via clicking on the arrow buttons and clicking OK. Simply connect via Ethernet and use the DHCP protocol. It needs to connect to your network.
     3. Once the printer connects to your network, it will display its IP address on the printer's built-in LCD display.

     Enter the IP address in a web browser on a computer that is on the same network. After clicking on enter you will be presented with an administration interface based on the web for your printer.

     1. Click on the tab 'network '.
     2. Click on "Wireless Network Configuration" in the options on the left.
     3. Status should be 'ON '.
        Configuration method must be "join an existing network.
        Name of the network is expected to present a list of available networks. Click on yours.
        Authentication should be set according to your network
     4. Click on APPLY and disconnect the wired connection to the router. The little light on the front of the printer wireless flashes because it connects to your wireless router. Once the light is solid new IP address of the printer should be displayed on the built-in LCD screen.  You should now be able to connect using this ip address.

• HP Color Laserjet 2550n will not print in color?

  My HP Color Laserjet 2550n will not print in color?

  I spent half a day Googling this issue and could not find any solution?

  When I press the go and cancel the 3 test pages print fine in color set button.

  But if I try to print anything from my laptop, it's all B & W.

  I already installed the latest version of PCL5, PCL6 and PS drivers from today:

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=388401&lang=en&lang=en&cc=us&cc=us

  None of them print in color?

  I think that is the question:

  http://i.imgur.com/WM8Oy92.PNG

  But, how to fix this?

  My OS is Win 8.1Pro x 64 with all updates installed.

  The colour toners are 100%, black is at 28%.

  rk_russelking: your suggestions have been COMPLETELY & TOTALLY USELESS.

  I found the answer here:

  ... «in the printer properties, select the tab settings of the device, scroll to the very last item at the bottom, which is 'Device Type'.» The value displayed (which of course got auto-installé as a default value, for both PCL6 drivers), is "AUTO-DETECT". You would think that would work, but it apparently does not.

  In any case, by selecting the drop-down arrow, it turns out that there are three available values: AUTO-DETECT, COLOR and MONOCHROME.

  Of course she then had me select COLOR, click APPLY and then click OK. I repeated the process for the other printer PCL6. »

  

  http://i.imgur.com/dxultKG.jpg

• LaserJet M1212nf: HP LaserJet M1212nf will not print, claims paper jam

  My LaserJet M1212nf do not print, and it has never printed. Whenever I have create a print job if printing from a PC, copy something via the scanner, or print a report in the menu, it goes through the following:

  1. Initializes the printer,
  2. During initialization, printer pulls in a piece of paper in the tray,
  3. Paper stops halfway in (seems to me like he already spent fuser, then probably would not print correctly in all cases), then the printer claims there is a paper jam.

  Note, this printer has never properly printed a single page. The number of impressions is zero (0). I've never had a paper jam.

  Note that regards the position of the paper as it is pulled into the printer, I use letter size paper, and the printer menu shows that it has set up to accept size stationery. I confirmed duplicate by checking through the web interface of the printer as well.

  Any help?

  And CV: If I can't get this problem solved, I'll have no value outside of this all-in-one at all. It will have been a large lemon and probably will poison any possibility to buy HP products in the future, including those based on the experience of support I've had so far, which has been zero. I tried to get the official support of the guarantee, but despite me documented proof of purchase, my warranty has been backdated to a until I bought itand now I can not contact technical support via the Web site options. I put in another conflict guaranteed, but on the basis of the likely response time will not get an answer until after a guaranteed year is officially over.

  Gary Dee
  wiseintro.co/deeabson

  Hey @Dee76,

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly post information and series numbers.

  If you are unfamiliar with the operation of the function of private messages of the Forum, this post has instructions. Please see the HP Privacy Statement.