HP LaserJet P4015dn prints duplex manually only

Similar Questions

• With the HP Color LaserJet 3600dn printer duplex printing

  Before the latest version of Adobe Acrobat Reader all printing recto verso has been supported.  Now, even if I click on properties and select two-sided printing, Acrobat Reader gives me sided printing.  How can I fix it?

  Hello

  I wonder that you follow all the instructions mentioned in the following link.

  https://helpx.Adobe.com/Acrobat/KB/print-double-sided-Acrobat-Reader.html

  What OS are you?

  Please try to update your player once and see if that helps.

  In addition, if you are using windows, please fix it once and see if that fixes the problem.

  Concerning

  Sukrit diallo

• Color LaserJet CM6040 MFP: A3 manual duplex Duplex on Color LaserJet CM6040 MFP taken in charge?

  Hello

  I hope someone can help to answer this question. I am trying to print a newspaper on the double-sided A3, but I get no prompt to reinsert the paper to print on the other side, as I do when I print A4.

  The parameters have been triple checked and still the A3 prints out sequentialy on one side.

  My question is the Color LaserJet CM6040 MFP support manual duplex Duplex A3?

  Thanks in advance

  JEAN

  The CM 6030 / 6040 CM User Guide manual States:

  «Duplex printing: provides printing automatic duplex (print on both sides of paper).» The range of paper size for automatic duplex printing is 175 to 320 mm (6.9 to 12.6 in.) x 210 to 457 mm (8.3 "to 18"). Media weight range is from 60 to 220 g/m2 (16 to 58 lbs.)"

  If you use manual duplex because the printer driver does not offer the automatic duplex option, it may be that the driver does not know that a duplex unit is equipped.

  The function "automatic detection" used by some drivers on the install (or update) does not always; make sure the driver knows that a duplex unit is present on the printer (assuming that a single is present):

  • For the instance of the printer in question, bring up the printer properties dialogue.
  • Select the device settings tab.
  • Make sure the duplex unit is set to installed and not installed.

  You will probably need to be logged in with administrator credentials in order to change the settings of the device.

• HP LaserJet 5100dtn: 5100dtn HP does not print duplex on Mac OSX Yosemite

  Hello

  I recently bought a LaserJet 5100dtn. I work with Mac OSX Yosemite (10.10.3). I can't get my OS to recognize the duplex printing option. I have the duplexer attached to my printer, and I know it works because it printed a test page. I have the setting the paper handling > Duplex > WE * however, it keeps printing sided pages.

  The problem is maybe that my printer settings have "duplex" grayed out.

  

  I wonder if there is a problem with the printer driver? This printer is no longer manufactured (I bought mine used), then maybe there is a problem with the driver communicates duplex printing features?

  Any help you could offer would be great! Thank you in advance!

  Just post to say that I found the solution to this video on YouTube:

  https://www.YouTube.com/watch?v=3KI6rfQ_PJ4

  The slight difference for users of Yosemite (this is an another OSX) is:

  Go to Printers & Scanners > click the printer you want to print duplex (in this case LaserJet 5100) > in the main window, click Options & supplies > leOptionsonglet > duplex unit.

  If you manually check 'Duplex' then 2-sided will not be grayed out when this printer is selected.

  Problem solved!

• How can I print black ink only automatic duplex mode for Officejet 6500?

  When I set the printer to automatically print on both sides, it allows only color or grayscale of high quality as print color options.  If I print on one side, then I have a third option for black ink only.  Does anyone know how to get black ink only when getting both sides to print automatically?

  Sorry, this is not an option.  When printing on the front of a page in duplex black is underprinted with color to make the 'together' impression and dry faster.  Thus "black only" is not an option when you print duplex pages automatically.

• LaserJet 1536DNf not print duplex

  I'm on Lion 10.7.3 and have a Laserjet 1536DNF MFP. I can no longer print duplex even if I select a double bond and long edge on the layout. I don't know when it started - maybe after the last update. As far as I KNOW, I have the latest drivers from Apple. All solutions?

  I checked this and the PPD file seems correct. At first, I thought it was the result of the 10.7.3 lion update, but now I don't know because I tried printing with my old laptop MacBookPro on Snow Leopard. Maybe the Lion update screwed a few settings in the printer? Thanks for your help.

• HP LaserJet P1606dn of duplex professionals second page prints upside down

  Sided printing worked fine when I arrived at the printer.  Now second page prints upside down.  I tried to install the driver XPS that worked once, but not now.  I have at least 8 copies of XPS Laserjet P1606dn of professional on my computer.  None of these troubleshooting options on any of these working copies.  I tried to reinstall the software of origin, but in vain.  Now the only copy printer I have that works, one side only, is hp p1606dn copy 3.

  Help, please

  Success, finally.  The application of service worked for me, after several tries.  I was able to remove all instances of the printer and re install.  The professional p1606 HP Laserjet still printed upside down, but after having installed the XPS (a previous forum suggestion suggestion) version it worked.

  Thank you.  I'll search the app of congratulations and give him a boost upward!

• Printer laserjet CP1215 color range. Only prints B & W cartridges but the colour.

  I have a color laserjet CP1215 printer. I set the printer to print only black and white and it prints only black and white. Then why my cartridges color short ink? Thank you

  Hello

  Thanks for the post.  I have attached a document below may have useful information regarding about printing with your CP 1215.  Good luck!

  http://support.HP.com/us-en/document/c01416937

• HP LaserJet 1320 will not print duplex on Win7 64 bit

  HP LaserJet 1320 is duplex printing is no longer. using Win7 64 bit system. I have used this printer for several years and it has worked flawlessly. Just installed Win 7 64 bit machine, has made the windows update in the choice to install printer, selected the "print on both sides" in the printer preferences. The book is re - feeds like it going to print on the other side, but a new sheet out and 2nd page prints on the 2nd feed and he re - feeds also as if printing on both sides. This used to work fine under Win XP

  Hello

  Please try to install a replacement driver to work around the problem and inform me of any changes:

  1. Run the installation of the following universal print driver:
     http://ftp.HP.com/pub/softlib/software12/COL40842/DS-99374-2/UPD-PCL6-x64-5.4.0.11744.exe
  2. Select the traditional installation mode.
  3. Set the port as LPT1 and follow the steps to complete the install wizard.
  4. Once the compelting the installation, you will notice a new icon of the listed all-in asHP Universal Print driver.
  5. Right click over the icon of LJ 1320 existing, click printer properties, enter in the Ports tab, note the port and close the window.
  6. Right-click on the universal print driver, click printer properties. Enter in the Ports tab and check the same port that you used in the original pilot.
  7. Enter in the device settings tab and verify that the unit of the duplex unit is installed.

  Now try pritner duplex using the universal print driver work.

  Please let me know if this is useful,

  Shlomi

• LaserJet 1020 reinstalled OK but only prints by default; no longer offers the print project/fastdraft pref

  Operating system is windows XP, tried to download all full versions of software, and even with the original disc, but same problem.  Prints fine but only in case of default.  How to choose other print options?

  Hello.

  I looked in some information about the driver settings for the default printing modes.  It seems that in the pilot, the draft mode is called EconoMode.  You have an EconoMode option in your driver options?

  You should be able to access it by entering the printer properties.

  

• Color - LaserJet 4700 print booklet.

  Once I select the brochure printing, the "Manual Duplex" button disappears and the document will not print in a brochure or print only one page of a document page 8.

  Hi MKarami

  Welcome to the community and hope you have a great day;

  Your LaserJet 4700 is a commercial product. I will suggest to post in the forum for HP Business Support for a greater chance to find a quick solution.

  You will find the commercial Council of Laserjet here.
  http://h30499.www3.HP.com/T5/printers-LaserJet/BD-p/BSC-413

  It can be useful;
  RobertoR

• HP Color Laserjet CP2025 print: color printing problem

  Had the printer listed above for several years and love it.  Have just started having problems with the printer does not print not not in color.  Have a recorded document that needs to be printed every month and have had no problems with it, until yesterday when it is printed in black only.  Another document word also printed in black only.  I printed a test page printed correctly.

  Don't know if there is a definition in the document, or is it a printer problem.  Help!

  Welcome to the community @mwillis HP

  I came across your post about the color printing problem and wanted to answer to help with my suggestions. Please see the guide below to resolve this issue.

  HP Color LaserJet - cannot print in color or impossible to Auto-Duplex (two-sided printing fails) after the installation of the UPD

  Let me know if you have any questions.

  Hit the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

• Color Laserjet M252N: HP Color Laserjet Pro printer M252N for Windows XP Embedded Standard.

  I can't install the driver HP Color Laserjet Pro printer M252N to my machine (OS: Win XP Embedded Std version) without an internet connection.

  1 error message are requested in advance for MS .net framework 3.5. (after that, I download and installed: NETCFSetupv35.msi)

  I found the name of the printer in the list of drivers, but then I try to add a new printer with this driver, the pop-up error message and the installation is not complete.

  My question is: the HP Color Laserjet Pro printer M252N are not compatible with Win XP Embedded Std?

  Please help, even the HP sales technician unable to answer me to this questation.

  Hello

  The HP Color Laserjet Pro M252N Featuer software complete is not supported on Windows XP, however you can get the features of the printer using HP PCL 6 Universal Print Driver listed on page 9 of the User Guide, be aware that the Service Pack 3 must be installed on the operating system to use the printer:

  Make a right click my computer and select Properties - locate Service Pack 3 in this form... If Service Pack 3 is not the operating system MUST be updated first:

  http://h10032.www1.HP.com/CTG/manual/c04475955

  You can download the HP Universal Print Driver below:

  http://ftp.HP.com/pub/softlib/software13/COL39348/LJ-95977-14/UPD-PCL6-x32-6.2.1.20636.exe

  As Windows Embedded edition is an edition of the customized version no official support is guaranteed.

  It is a customized operating system version includes only the components of the operating system selected for specific needs.

  Those selected by the OEM computer and not necessarily include any component required by the HP software or hardware.

  Try to install the printer and see if this can work, however it can work as explained and may not only the manufacturer of the computer can respond if such material can be installed on the operating system or not...

  Kind regards

  Shlomi

• Print Officejet 6000 occupies more of the page when printing duplex

  My printer is set by default to duplex print. Whenever I use my 6000 Officejet to print two-sided document printing starts just below it should be at the bottom of this page which he finished much lower than when printing a single page (from the same document).

  For example: if I choose to print a page only from multiple paged it document prints fine, exactly as displayed on the screen. However if I choose to print pages 1 and 2 then printing starts at about 5mm below printing and print finishing 15 mm below where it should be. There is no difference in the width of the impression.

  Hi @Porky007,
  
  Welcome to the HP forums!
  
  I understand that you are having problems printing duplex and I will certainly do my best to help once I have gathered a little more information
  
  1. what version of Windows or Mac do you have?
  2. is the printer connected via USB or wireless?
  3. what program you print from? Have you tried another program?
  4 what even happened if you disable duplex printing?
  5. He made it for all pages or just one?
  
  Once I have that information I'll certainly look more in things for you!
  
  In the meantime, if you are using Windows, please download and run the HP print and Scan Doctor and see if it can detect problems for you

• How can I print the manual?

  It is a question that applies to my two recent purchases of SONY, a SONY kdl60ex720 TV and now a camera SONY DSC-HX100V. How can I print a copy of the users guide? This must been an oversight by SONYS CE Ministère, it is not very difficult to provide an option to print the manual page in its entirety not only one at a time.

  You can use Adobe Acrobat to print all I have manual from the Web site as a single pdf file. You can use the trial version of Acrobat for this work.
  Choose "Create a PDF file from the Web site" and copy the URL. Make sure "load the entire Web site" is selected.