Printer laserjet CP1215 color range. Only prints B & W cartridges but the colour.

Similar Questions

• I nearly filled my HP F4580 printer cartridges, but the printer thinks they are empty.

  I nearly filled my HP F4580 printer cartridges, but the printer think they are empty, so I can't print.

  If I reinstall the cartridges, I change the printer says the ink level, but this went after printing 1 page. Y at - it a simple sollution for this problem?

  @ Ton101 - I would like to clean the contacts on the cartridges and the printer to make sure the accumulation was not the cause of the problem you are having with the printer. Follow these steps to clean the electrical contacts on the cartridges and inside the product.

• I have a hp m175nw printer. email prints from my iphone, but the image does not work

  M175nw printer. email prints from my iphone, but the image does not work

  If the DPI (dots per inch) is less than 100, the printer will not print the photo because it would be too low in quality. Draw the image on the computer, then right-click on it and click Properties, check the horizontal and vertical dpi and see if these figures are less than 100. Have you tried to connect the iPhone to the same network as the printer and try to AirPrint peak? AirPrint road doesn't have the same requirements on IPR as the ePrint.

• I am trying to create a button print in my form, but the Action tab does not appear

  I am trying to create a button print in my form, but the Action tab does not appear

  I thought about it. When I tried to create a new form, I chose the "this form needs the signatures '. This option does not allow to add action buttons. If I create the form without checking the signature box, it works.

• LaserJet CP1215: Color CP1215 print quality - Windows 8.1

  Systematically print very dark colors.  I printed from Word, Adobe PDF viewer and Photoshop all with the same results.   I installed new cartridges and have installed the latest driver.  Since there is no available since Windows 8.1 Toolbox - have not found any way to print the configuration page - hold the results just RESUME button in the gree light of power is flashing but nothing prints.  It seems not to be possible to print a cleaning page.  I'm at a loss what to try to fix this.

  I have downloaded and run the HP print and Scan Doctor 4.6 and everything out OK, the test print that comes out seems OK for me but I don't know what it is supposed to look like.  The cyan block seems a little light.

  Hi dsouleles,

  I see that you have problems with the dark printing. I'd love to help you.

  You can adjust the brightness in the application you are printing from, if this isn't a problem with the hardware with the printer.

  You use windows built in driver or did you download the Plug-and-Play drivers?

  HP Color LaserJet Plug-and-Play package.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Try and print a self-test on the printer hardware to see if it is a hardware or software problem.

  Solving print quality problems. Go to eight Solution: print a configuration page. Is it printed correctly then it would be software related. Let me know the results and how to print the configuration page. Please go well the steps contained in the document. Unfortunately, you'll skip the steps of the box tool.

  If the problem is still related software, you can continue with the following steps:

  Make sure that the correct paper type is selected in the print driver and he is not in default to unspecified.

  Here is a document for the different features in the print driver. Use features in the Windows printer driver.

  What kind of paper do you use?

  Print and Scan doctor, you may have the option in the upper part, in one of the menus to run a diagnostic test, possibly cleaning and calibration of the printer. Try printing Scan Doctor for Windows and HP. Under how to use diagnostic and printer cleaning services?

  Have a great day!
  Thank you.

• HP LaserJet 200 color M251: HP LaserJet 200 color M251 only prints completely black pages

  While in the middle of printing a 24 page document, printed pages went from perfectly readable to completely black (black Coal Mine).  The cartridge is only around the age of 2 months and a lot of toner.   I deleted and reinstalled the printer, but the problem remains.  To me it looks like a hardware problem (circuits) at this stage.  Thanks in advance for advice about the diagnosis further.

  Thanks rb11, I realized these things (support page, etc.) and the problem persists.  I could add the image of the first page that turned out to be totally black when printing.  If all goes well, I can attach a jpeg file, illustrating the speed at which the page went to total darkness.

• The image passes grayscale when you save or print preview Postscript/PDF but the text remains in color?

  It is in color, until I have turn on overprint preview, or try to save the booklet in Postscript or PDF format.

  In print preview or when you do everything above, it goes gray scale but the text and rectangles are in color?

  The images have been placed as eps files from Photoshop and have been duatone in PS.

  Help, please.

  You and all those who have contributed, thank you.

  The problem is that the files were not CMYK Pantone color library, they were the nuances I had made myself were not recognizable to the printer.

  I can't say why we are forced to use eps or Postscript files, as far as I know is that I have to follow the guidelines directly or it will result in a failure. It is a strange Bachelor of Graphic Design.

  Thank you all, the problem has been resolved.

• HP\HP LaserJet 200 color MFP M276\Help_Learn\Help.exe works but does not display anything?

  After several relocations I still see HP\HP LaserJet 200 color MFP M276\Help_Learn\Help.exe and clicking on the icon I can see (by the Task Manager) running.

  Nothing visible on the screen?

  Hi marahu,

  My apologies, I should have been more clear!

  You can certainly still use your Firefox for everything, it's just that the LaserJet software relies on Internet Explorer, so we must still make sure it is up-to-date, but you don't have to use it if you do not want.

  Now you can go to Internet Explorer 11, simply use the link in my last post

  Once done, if the help file still doesn't load, you have to uninstall the printer and reinstall so it can recognize the updates you made.

  I would like to know how it goes!

• I just set up my printer hp6700 for eprints, but the prints are waiting to print no

  I set up my new officejet 6700 for eprint, say anything it is configured correctly, when I send a picture of my Ipad it passes to waiting, but does not print, my OS is XP pro SP3. I have reset the printer, I have reset the modem/router, WiFi signal is max on the printer, I can't find anything on the site web of HP or forums I looked and nothing on the Web, although many people seem to have this proplem, I tried a few suggestions but no joy.

  You sending an e-mail to the e-mail address of printers or print directly from the iPad via AirPrint?

  If see you that they are waiting to ePrintCenter, then you use ePrint. I recommend the cancellation of all the print jobs that are currently stuck in pending. After clearing the printing on, go ahead and do the following.

  First of all, we need to power cycle your router and the printer.

  1 unplug the power cord at the back of your router, then power off the printer. Wait about 20 seconds.

  2 reconnect the power cord to your router, wait 30 seconds and turn on the printer.

  After you complete these steps, start again with ePrint and let me know if it works for you. If they are still blocked in the Meanwhile, I have a few troubleshooting steps more than we can try.

• Select > color range, does not v13.1.1 on the retina display Mac

  Y at - there a trick to getting the new color range selection feature to work on a Mac Book Pro of the retina?

  I am quite familiar with the selection of the range of colors in the previous version of Photoshop and used regularly. I decided to try, as simply as possible, using a flat image (not layers) and try to choose the colors. I increased the contrast of the image in order to make the shadows and lights much easier to get out.

  I explored setting the size of the sample at the sample up to 3 x 3 and 5 x 5. I also put my screen resolution to 2880 x 1800 (to reduce the possibility of problems of anti-aliasing).

  It will not make any selection, using the eyedropper sample.

  Using other options will work, as the highlights, shadows, skin tones, etc, but it won't do anything with sampled colors.

  SOLVED!

  At least for me. I didn't trash the preferences file and now its range of colors works as it should. You can possibly have the same chance.

  http://TV.Adobe.com/watch/the-complete-picture-with-Julieanne-Kost/how-to-reset-Photoshop-Le file-Preferences-cs6s.

• HP Laserjet - 100 MFP M175 NW - error message "wrong cartridge in the yellow location.

  Can you help me? I got a HP LaserJet 100 color mfp M175nw for 7 weeks - I bought new cartridges of HP spare. During the existing rotation of the cartridges. I got the error message 'wrong cartridge in the yellow location', but I was able to replace others (3).  I did not remove the yellow, and the printer was working fine until I started the replacement operation.  The HP refuses to allow me to remove the exisiting yellow cartridge - it will turn on (it seems to stick to the BLACK), after giving me the error message.  She now refuses to print anything. What is the solution?  I had a printer in working order very well suddenly dislike the original yellow cartridge and will not be printed.  Online technical support was helpful but confused and can only recommend a procedure in which I turned off and manually remove ALL the cartridges, using a screwdriver to force to rotate the cartridge door.  Someone has successfully resolved this problem, or have an insight into why it happened?

  I'll try to do a hard rest to the printer in an attempt to clear the error message and return the printer to a known working state and clear the error message. After that, I would try to access the cartridge and see if the printer will allow you to remove and then replace it in the printer.

  1. press the Power button to turn off the product.
  2. unplug the power cord from the back of the product.
  3. disconnect the power cord from the electrical outlet.
  4. wait at least 30 seconds.
  5. plug the power cord into the electrical outlet.
  6. reconnect the power cord to the back of the product.
  7. press the Power button on o turn the product.

• I have a new color cartridge, but the printer will only print b/w

  Original title: printer

  My color cartridge was low so I replaced my color cartridge.  Although even I have a new color cartridge in my printer does not print in color.

  Hi Paulawagner,

  ·         What operating system is installed on your computer?

  ·         What is the brand and model of the printer?

  ·         Did you do changes on the computer before the show?

  Please answer the following questions so that we offer in addition to the steps to solve the problem of troubleshooting.

  First of all, make sure that the color cartridge/toner is not empty or blocked.

  You may have accidentally changed the print options that caused the problem.

  Check out the following articles for more information about changing the printing options, printing a photo, etc.:

  Print a photo

  http://Windows.Microsoft.com/en-us/Windows7/print-a-picture

   

  Choose printing options

  http://Windows.Microsoft.com/en-us/Windows7/choosing-print-options

  I hope this helps.

• HP Photosmart 7520E-all-in-one: black prints fine for text but the black areas in photos come out green

  Black ink works very well for text and text with little color, but when you print photos (on HP Advanced paper which is recommended), printed black areas aqua green, or deep.  Other colors are fine.  How can I fix it?

  The probable cause is a cartrdige Photo print does not correctly.  In the paper here troubleshooting steps can help solve black photo print does not correctly on your printer Photosmart 7520.  The Photo cartridge is on the far left of the printer.

• My oki b2200 printer does not work, but the lights are flashing i dnt know what to do

  I already delet and printer announcement once again.   and I see 2 green lights and 2 flashing umber yet blinking.its only a month old printer.

  Hello

  Because it's only a month, it should be under warranty.

  Contact the manufacturer of the printer for their support.

  See you soon.

• HP Deskjet D1530 print does not correctly but the test page is awesome

  After using the printer has multiple pages, the following pdf, I tried to print print with less and less visible text and clear the text boxes that are visible are generally at the bottom half of the words.  I printed the test page, but it comes out perfectly clear.  I tried to print other documents, but they are all in print barely visible in the same way.  Suggestions?

  My bet would be a problem with your color cartrdige.  (Some programs such as Adobe Reader can send data to the printer as color to make black).  Print a page of diagnosis as described in this document or the check ink levels in your color cartridge.