HP Officejet 6500 Wireless: Wireless HP 6500 does not scan

Similar Questions

• OfficeJet 6500 does not print black

  Printer started printing black printing very light and jagged. Replace the cartridge of black with no improvement. A run a few cleaning process and replay it does not print anything in black. Colors seem to work well. What is the print head?

  Clean the printhead as per HP, website and the problem disappeared.

• OfficeJet 6500 does not copy

  Can copy OK yesterday but when put something on the printer itself, it looks like it's copy, but it comes out of the Virgin. Looks like a mechanical problem, network OK thanks

  Try to print a SELF TEST or report status of printer to see if the prints are printed. You can also perform a hard reset. Unplug the power cord at the back of the printer. Leave for 30 seconds and plug it back.

• HP Officejet 6500-do not scan

  My printer prints OK.  I can't scan now.  I scanned in images in the past. "Driver Detective" pops up saying I need an updated driver.  Driver Detective is safe? HP should not provide free updated driver?

  My printer prints OK.  I can't scan now.  I scanned in images in the past. "Driver Detective" pops up saying I need an updated driver.  Driver Detective is safe? HP should not provide free updated driver?

  Hello

  Here are links where you can download the drivers and ask questions about this problem on the HP forums.

  HP support, drivers, Contact and help | HP support:

  http://WWW8.HP.com/us/en/support.html

  Scan, fax and copy - Support HP's Forum:
  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/BD-p/scan

  Concerning

• Have HP Officejet 6500. Wireless connection - scanner does not.

  Have HP Officejet 6500. Wireless connection. The print function works fine. However, when I try to scan a document, the "no scan option" prompt appear. It seems that the HP 6500 does not recognize either (my desktop or laptop computer)? Help

  Try to install the updates and the usefulness of this link.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=3944627#N956

  mohanad

• HP 6500 Wireless does not scan

  The printer works fine for printing, but it does not scan.

  When I select scan on the officejet 6500 wireless it is said: 'SCAN MENU SELECT a COMPUTER' any key on the keyboard work only 'OK '. When I select OK it says "No. Scan Option - refer to device documentation to troubleshoot. Press OK. »

  Operating system: Windows 7

  Connection to a printer wireless

  Download/driver downloaded and installed oj6500ve709_basic_14

  Mahalo (thank you in Hawaiian) in advance for your help.

  Hi soccer_crimson,

  Follow the attached document for your Officejet 6500 printer model.

  Steps to follow for issues with WIA - Windows Image Acquisition:

  Follow the steps below to check the WIA Service:
  1. type services.msc in run or search and files program
  2. scroll the page up to the WIA Windows Image Acquisition
  3. make sure that the service is running. Click on stop and then restart to ensure
  4 restart the computer
  
  Restart the services of dependencies:
  1. Click Start, in the search box type "services" without the quotes.
  2. scroll down until you see Windows Image Acquisition (WIA).
  3. double click on it and go to the Dependencies tab.
  4-2 services must be listed.
  5. close this window and look for the remote procedure call (RPC).
  6. make sure it's on manual or if it is enabled automatically, just leave it. Make sure the service is started.
  7. go to hardware detection kernel and Double click.
  8. set the Startup Type to manual and click on apply.
  9. you should be able to start the service by pressing Start.
  10 now, you are done and the Twain Manager must work and gives you is not a mistake. This should solve your problem

• HP 7612: I have a 7612 Officejet from HP that worked wireless but now does not work. When I try to

  I have a 7612 Officejet from HP that worked wireless but now does not work.  When I try to open the Network Setup Wizard a message indicating "wireless communication has been disabled. Can someone please?

  Thank you!

  hhmenar

  Hey @hlhmenar,

  Welcome to the Forums of HP Support!

  I understand that you are experiencing some problems with the wireless settings is disabled on your Officejet Wide Format e-all-in-one printer. I can help you with that.

  I'll send you some instructions describing how to do a factory reset on your printer. If you check your Inbox of forum you should see happens shortly.

  Please let me know the results after following the above. If you can run the wireless setup, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP Officejet 6500 a E710n-z: HP 6500 printer scanner prints but does not scan

  Since my OS has been upgraded to Windows 8.1 the printer scanner prints (very slowly) but does not scan!

  I tried HP Print and Scan doctor, he worked once (clumsily) but not since. I tried Windows ' whatener it is called "but nothing.  It was working perfectly since I the printer scanner.   Now I don't NOTHING DO let's me scan.  and the fix message tells me that my WPA security password is not quite valid (nothing has changed here!)

  I checked the internet, it seems that a lot of people have the same problem.  I don't know if anyone has fixed it.  The so-called solutions are not very easy to follow!  Just as they do not work.

  Thank you X-23, I'll ty that when I have a little more time.

  Dziadz

• My HP officejet 6500 will not print in colour without black. I tried to run the diagnostic, turning / of

  My HP officejet 6500 will not print in colour without black.  I tried to run diagnostics, turning on/off, changing the cartridge, mop up the cart - ink, withdrawal and the cartridges, printing a test page.  All to nothing does not.

  I continued to deepen the forum and found what was a soluntion for me.  I went to the configuration selected, then went to tools, it chose and then select printhead cleaning.  The first time that he clean the printhead, I only got six rectangles colored at the bottom of the test page printed.  My screen then asked if I wanted to get another clean process and I said YES.  Low and behold, the test print page not only the FCMA out with 6 colored rectangles but also tons of alphabets in black.  Hooray! His works again.  Hope this works for you.

• Wireless J6480 prints fine, but does not scan

  All J6480 printer a HP. It was connected to a desktop HP running Windows XP with a USB cable and printed and scanned OK. Computer for office is dead and has been replaced by a Samsung Windows 7 laptop so the XP installation CD does not work. A printer connected to the laptop and it prints fine wireless but does not scan.

  1 downloaded the HP website OJJ6400_Full_13 and I tried to add an another J6480 but he says that there is already one installed in a wireless port. I didn't go ahead because the printer does not print not good. Should I continue with the installation?

  2 Ran HPSDU.exe diagnostic tool and it said ojj6400 USB HP Officejet J6400 is the only installed printer.

  3 HP Digital Imaging Moniter displays the HP Officejet Series_TMP000 disconnectedstatus.

  4 start-all programs-HP shows only HP Smart Web Printing and Officejet J6400 Series. There is no HP solutions Center.

  Thanks for any help

  I uninstalled the J4680 printer and all HP programs associate. Start - all programs showed no HP at all. I installed the full version of HP J4680 programs and everything works fine. The wireless connection was automatically created during the installation and the scan works very well.

  Thank you for ME

• 128 GB Canvio AeroMobil Wireless wifi SSD does not

  128 GB Canvio AeroMobile Wireless wifi SSD does not
  am facing problem with this device where I can't find it on my phone or any other wifi device (nothing is displayed on the wifi and cannot connect to the device, direct mode is OK).

  Please help

  Dr. Hamid mohamed

  Any help please?

• Wireless communication switch does not work - Satellite A200 - 23 c

  The laptop has been included, and both a WI - Fi connection stopped working.
  Wireless communication switch does not work. Do not ask is it possible to do?

  Your English confuses me a bit little, but can you please tell me what model of laptop you have and what is the problem here?

  Wireless network card is enabled correctly in Device Manager?

• Wireless network adapter does not work on my Satellite A200

  Hello

  My wireless network adapter does not work under Vista. If I press FN + F8 nothing happens. Wireless communication is always offline.

  What can I do?

  Details:
  Typ: Atheros AR5008X Version: 7.2.0.164
  Laptop Satellite 200
  PSAE6E

  Please help me!
  Thanks in advance!

  Phil

  BIOS bug? I don t think so

  First of all, you must make sure that this isn't a hardware problem. In this case, insert the Toshiba Recovery CD and reinstall the operating system of this device. This will outline the laptop to factory settings. Notes; This would format the whole HARD drive.

  After the new installation, you must activate the WLan switch on the side of books, and you can then use the switch button FN + F8 to select the WiFi network.

  I assume that you have already configured your Wlan router. So the same settings such as the SSID, encryption of WLan, etc. must be defined on the laptop too.

• HP pavilion 15-n019TU: bluetooth, wifi, wireless driver button does not

  Hello

  Bluetooth, wifi and wireless button drivers do not work on my pc for 64-bit windows 8.1 single language.

  I could not find the following hardware ID

  PCI\VEN_FF42 & CC_0D1100
  PCI\VEN_FF42 & CC_0D11
  PCI\VEN_FF42
  PCI\CC_0D1100
  PCI\CC_0D11

  USB\VID_0E8D & PID_763E & REV_0100 & MI_02
  USB\VID_0E8D & PID_763E & MI_02

  ACPI\VEN_HPQ & DEV_6007
  ACPI\HPQ6007
  * HPQ6007

  USB\VID_0E8D & PID_3001 & REV_0100

  I use sp65235 for bluetooth, sp63752 for the driver, sp63317 for wifi wireless button. but these don't work. Wireless led button does not turn. It stays red. Help, please.

  Thanks in advance

  Bests

  Abir

  Hello:

  The bluetooth ID seems to be for a Mediatek bluetooth adapter which means you have a Mediatek wireless card.

  These would be 8.1 Windows drivers you need for these devices:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-131396-1&cc=us&DLC=en&LC=en&OS=4158&product=5447189&sw_lang=

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-130262-1&cc=us&DLC=en&LC=en&OS=4158&product=5447189&sw_lang=

  6007 a need of this driver.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-131788-1&cc=us&DLC=en&LC=en&OS=4158&product=5447189&sw_lang=

  I don't know what other devices are.

• Wireless zero configuration does not start automatically. I need to run it whenever I restart the computer

  Wireless zero configuration does not start automatically.i have to start whenever I restart the computer. I have a laptop dell inspiron

  Moved from feedback

  Original title: WiFi

  Hello

  1. what version of Windows is installed on the computer?

  2. is it works much earlier?

  3 have there been recent changes made on the computer before the show?

  To activate the Configuration service automatic wireless so it starts automatically, click the Start button. Select settings , then select Control Panel.

  If you use Windows XP display, select the performance and Maintenance category, and then select Administrative Tools.

  If you use Classic view, and then select Administrative Tools. In the left pane, click the Services icon. Click the automatic Wireless Configuration icon in the right pane, and change the box Startup Type to Automatic.

  This parameter will be defined the service starts automatically at boot time. Then click on the Start button to start the Wireless Auto Configuration service zero wireless and click on the OK button.

  The automatic Wireless Configuration can also be started and stopped from a command prompt.

  To start the automatic Wireless Configuration, run the following command:

  net start wzcsvc

  To stop the automatic Wireless Configuration, run the following command:

  net stop wzcsvc

  For more information, see the link.

  Wireless Zero Configuration Reference

  Please post back with the results and we will be happy to help you further.