HP OFFICEJET PRO 8500, WINDOWS XP

Similar Questions

• Is the HP Officejet Pro 8500 Windows 8 compatiable

  I have a 4 or 5 years, 8500 I use wireless with a 10.8.2 iMac.  I think to install Win 8 to be accessible via Parallels and I was wondering if I'm having problems of compatibility between the printer and the computer.  I currently use the same printer wireless with a MacBook Pro with Win 7 too through Parallels without any problem.

  Hello

  The answer is Yes. You can download his full feature software and drivers from the following link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4132&LC=en&cc=us&DLC=en&sw_lang=&product=3752456

  Kind regards.

• OfficeJet Pro 8500: There is no driver for the Officejet Pro 8500 for Windows 10?

  Cannot find a driver for the Officejet Pro 8500 on Windows 10

  Former driver is blocked running.  Where is an updated driver?   Worked very well under Windows 8.1.

  Reinstall the driver of windows 8.

• Re: There is no driver for the Officejet Pro 8500 for Windows 10?

  Tried to load the complete package of windows 8. did not work.  Tried it on 2 10 Windows - had already installed win10 and the other has been upgraded to win7.  I REALLY need to be able to scan.  Any suggestions out there?

  Thank you

  Welcome to the HP community @seamaster805,

  I came across your post about the problems you're having with installing drivers of Windows 8 on Windows 10, and I wanted to stop to help out.

  There are 10 Windows drivers available for your Officejet 8500, and you must install the full features drivers correct and the file of the software for it to work. See the image below and the link to get there. Try to install again and if you are having problems or errors during installation, let me know please and I will surely do my best to help you!

  • All-in-one printer, HP Officejet Pro 8500 - A909a

  

  Hit the "Accept as Solution" If we have reached a solution and the "thumbs up" to say thank you for my help.

  Thank you

• Can I print posters 2 x 2 or 4 x 4 with Officejet Pro 8500 has? Windows 7.

  Can I print posters 2 x 2 or 4 x 4 with Officejet Pro 8500 has? I am running Windows 7.

  Hello

  The 8500 (A910) driver is not support printing posters.

  To work around the problem, you can use another pilot who provide the required functionality:

  1. Enter the control panel > devices and printers, click Add Printer .
  2. Click on Add a local printer.
  3. In use the existing Port, select the port for your printer:
     DOT4 if your printer is connected by USB
     If standard TCP/IP network connection used.
     And then click Next.
  4. Click Windows Update in the list of printers, allow several minutes for what the list will apear again.
  5. Select HP in the column of manufacturing
  6. Select the printers HP Deskjet 6980 series column.
  7. All the steps in the wizard.

  Now, you will be able to use the print feature post using the driver 6980, by setting the option Pages per sheet and poster in the finishing tab.

• HP officejet Pro 8500 909: HP Officejet Pro 8500 909 has not scan after downloading Windows 10

  About 6 weeks ago, I downloaded Windows 10.  Today, I tried to analyze something and received the message "no Scan Options".  So I tried to go to the Hp Solution Center and who do not respond. When I was on Windows 7, I have had no problem scanning or with the HP Solution Center.

  Hello

  You will probably need to reinstall the HP software after an upgrade of the operating system.

  Please follow the steps for exactly the problem and check for the difference:

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-8500-all-in-one-printer-series---A9/3752454/model/3752455/document/c04714314/

  Section ' can not analyze after upgrade to Windows 10 "should apply, or the"HP solutions Center can not run"or 'Scan is busy or in use' error with a connected printer"if it's the exact specified error when you try to open the HP solution... Center.

  If you need to uninstall the HP software, uninstall it by running the following remove utility Uninstall_L4:

  http://ftp.HP.com/pub/softlib/software12/COL31044/MP-77037-4/OJP8500vA909_Scrubber_13.exe

  Kind regards

  Shlomi

• OfficeJet Pro 8500 A910g: OfficeJet Pro 8500 software on Windows 7

  I use this printer for about three years, and about a year, when I clicked on the icon of the software OfficeJet, or tried to run from the program list window, nothing happened.  A HP support agent sent me a link to the "HP Print Scan doctor and", and that fixed it.  A month ago, it's the same thing.  I uninstalled all the HP software associated with the printer and went to HP.com and downloaded a new full version of the driver installed, then restarted the computer.  The same thing happens again.  I can print anything from the PC and use the front panel of the printer to scan the items, but by clicking on the icon HP Officejet does nothing.  When I run the "doctor HP Print and Scan" and make a analysis test, the scan window goes up on the PC and allows me to scan and save any document on the glass or in the charger without any problem, but even after I do that, clicking on "OfficeJet Pro 8500 A910.exe" does nothing.    I use Eset smart security 8 software and SpyHunter, but even with them turned off during the download and installation, and while I try to run the software of the printer, nothing changes with this problem.

  I saw someone post this question on the line.

  Hello

  Try to install the following hotfix:

  http://support.HP.com/us-en/document/c03640384

  Once you start the patch, let a few moments and try to launch the HP software again, it should not be a quick after launching the patch.

  You can see any difference?

• How is my scanner HP Officejet Pro 8500 all-in-one will not work on Windows 8?

  I just upgraded to Windows 8. My HP Officejet Pro 8500 A910 all-in-One printer works fine, but the scanner won't. I get an error message that says: cannot find the scanner. What can I do to correct this situation? HP has a driver that works with Windows 8?

  Did you uninstall this printer before the upgrade to Windows 8?

  If not, then I uninstall the software for the 8500 A910 and reinstall with the drivers up to date.

  The link here for the driver for the 8500 A910 page has e-all-in-one

  You can also get drivers for HP printers in Windows 8 by using the HP printer installation wizard.

• HP OfficeJet Pro 8500 A909: Hp Solution Center does not work for Windows 10 installed

  Since windows 10 my HP OfficeJet Pro 8500 A909 will not scan unless I run through the diagnostic tool and then do a test of loading scan. I used to do that through the HP Solution Center, but this doesn't seem to work. His charges and must charge bar but just Flash when you click it. I ran all online and diagnostics Windows, uninstalled and reinstalled on HP website and downloaded new drivers. It still does not work. Windows tells me that all drivers are up-to-date. Out of options.

  Hello

  Could be updated Windows 10 recently. Please check your history of updates of Windows 10 and remove/uninstall kb3132372

  Note: Microsoft is working with Adobe now:

  https://support.Microsoft.com/en-us/KB/3132372
     
  To uninstall this update, click Control Panel, click System and security, click on view installed updates in Windows Update, then select in the list of updates.

  Kind regards.

• HP Officejet Pro 8500 A910 Premium will not send fax from computer with Windows 8

  My printer was working fine on Win XP and I could fax directly from the printer or the computer.  I installed 8 32-bit Windows (I am under an older system that works very well for everything that I use it for - thank you very much) and downloaded the latest driver for HP large & software for Win 8 32-bit.  Everything works perfectly, except for the computer fax.

  If I run the test of the printer fax, the fax test PASSES.  If I run the test fax from the computer, the fax test PASSES.

  If I put documents into the feeder of the printer and use the features of fax printer, it Fax beautifully.

  It's only when I fax from the computer, the screen appears with the status of the queue, then state turns to cancelled each time.

  He has always worked on Win XP.

  The FAX and FAX printer driver for the printer-FAX appeared in Control Panel automatically when I installed the HP drivers/software update.  All the properties of the FAX printer seem good.

  I tried a usb connection and a connection of network ethernet, with the same results.

  Printing and scanning all work fine.  I really like this printer and I love it even more if I could figure out how to get by fax a document from the computer.

  When I say fax from the computer, I mean opening a document saying print, select Fax - HP Officejet Pro 8500 A910, filling the page of information by fax, selecting my cover page options and press send fax.  Everything like I used to do it before I upgraded to Win 8.  When I hit send fax, it is when I get the popup that fax is in queue, then it goes to cancelled.  No error codes are displayed, no clue as to why, no nothing.  If I print the document and put it in the printer tray I can using display printer fax without problem.

  Very weird.

  Well, I spoke with some of the engineers, and they suggested next steps. First of all, here's a thread on a forum of MS on the removal of an alternate driver.

  http://TechNet.Microsoft.com/en-us/library/cc730875.aspx

  Another thing to note is that in Win8, you can easily access the command prompt by pressing the windows key and typing "command prompt".

  In addition, I will PM you walk a few others on the removal of the remains of the software from the back-end of your PC. To be sure, you will need TO follow these instructions to the letter.

  Do these two things and let me know what happens after the installation of the printer again since the direct download link I already provided above.

  Let me know and have a great day!

• OfficeJet Pro 8500 Wireless - pop-up window does not disappear

  To start the computer, a window pop up keeps saying "Please wait while Windows configures Document Viewer.

  Then he said: "Insert the Document Viewer disk error 1706 no valid source could be found for the viewer of documents produced."

  I am connected wirelessly with a Hp Officejet Pro 8500 wireless printer... And it prints, but message pops up everytime I open computer, or open HP solution Center.

  Running on Windows XP. -

  Any help would be kindly appreciated - as this pop-up message won't go away.

  I was hoping that the simplest method would work first.  I studied this carefully for you that I am aware that the missing files in your registry can cause this but I can't tell if this is directly related to the HP Solution Center or XP computer.  You are able to open the solution Center?  If so, then I do not recommend remove and reinstall the printer immediately if it is scanning and printing correctly.

  Microsoft Forums gives a very long list of troubleshooting steps, but the reason it is suggesting that a clean boot is to make past the error.  I don't think it will fix actually.

  This document entitled "Error 1706 - What Is It' had the same information I was looking for.  In the end, he recommends the purchase of a software computer cleaning, but if you read this document that tells where to find this missing file you and you can not find, I recommend the simplest method first which works simply on your XP Disk Cleanup (Start button > all programs > Accessories > system tools > disk cleanup) and restart the PC.  I really want to try to save the greater amount of time, and keep it as simple as possible.  Here is an example of the magnitude that it can get however.

  Let me know if any of the simple methods do not work, and I'll give you the best recommendations on registry cleaning software.

• HP Officejet Pro 8500 has more: I need help to setup windows fax and scan on a network wireless home

  I'm stuck in the box of / address of the fax server in the Windows Fax and scanning configuration wizard. Where can I get this information? I think I can finish with this info.

  Hello

  Windows Fax and Scan allow scanning from Windows, fax of the printer can be done by the HP Officejet Pro 8500 A910 software or Print Fax - printer HP Officejet Pro 8500 A910.

  Windows Fax and Scan to allow fax when your PC is equipped with a fax modem that you can find below:

  http://Windows.Microsoft.com/en-us/Windows/set-computer-send-receive-faxes#1TC=Windows-7

  Follow page 58 of the user guide below to send a fax from your computer using the HP device all in one:

  http://h10032.www1.HP.com/CTG/manual/c02668142

  To receive faxes on your PC follow the section "to set up fax to PC (Windows)" on page 69 of the instructions.

  Kind regards

  Shlomi

• Windows Server 2008 OS is not acceptable for Officejet Pro 8500 has more

  I am installing an Officejet Pro 8500 has more on a network that contains just a Windows Server 2008 R2 (64-bit) computer and a bunch of zero clients.  I read the document "installation of the software of the printer on Windows Server 2003 or 2008" including the updated title hope in my heart.  Unfortunately when I followed the instructions to install from a. MSI file, I get an error message saying "this computer's operating system is not supported", as can be seen in

  https://www.dropbox.com/s/oi3ur31frg8dhi3/HP%20error%20via%20MSI.PNG

  I am able to print to this device I have widower of drivers from Microsoft Update, but I want to be able to scan with it.

  I solved this problem by installing the complete package on a Vista laptop then set up a network folder on the server for the scanned images.  I then unplugged the laptop from the LAN and now I can scan using the front panel of the printer/scanner and images appear on the shared folder of Server 2008.

• have windows 8, cannot print from HP officejet pro 8500, PLEASE HELP? !!

  OfficeJet pro 8500, have windows 8 65 little now, does not print, I have troubleshooted on chat with HP technical support. they had me uninstall and reboot, reinstall, and it still won't print. the printer works. It works with all the other computers runing on windows 7 & our cell phones. Help, please.

  Hi coreysmom923,

  Follow the steps below and let me know what happens?

  First step: clear temp directory

  1. Type %temp% term or search programs and files of field
  2. Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
  3. Proceed to step 2 below

  Second step: downloaded and extracted to your system:

  1 download the drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-110033-1&CC=US&DLC=en&LC=en&os=4132&Product=3752462&sw_lang=

  2. once the download is complete, double-click the file to extract the software.

  3. when the installation window opens, press the Cancel button to stop the installation

  4. tap folder in the race or search programs and files of field

  5. Locate and open the folder starting with 7z (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11 start the uninstall_L4

  12. once the uninstall is complete, restart the computer

  13. run disk cleanup from the tools Accessories\ system under all programs folder

  14. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know if you are able to successfully install the software and driver and are able to print & scan?

• OfficeJet Pro 8500 wireless (A909g) cannot print to network on windows computers folder 8

  I have an Officejet Pro 8500 A909g on a home wireless network with three windows computers.  Recently upgraded to the Vista computer and the computer from Windows 7 to Windows 8.  Still, the third computer is Windows XP.  The updates were 'clean' (started from scratch) and the latest full version of Windows 8 Hp driver has been installed.  Everything seems to work fine, except that I can't "scan to network folder" on both machines to Windows 8!  I can scan a file from the Hp Solution Center Console and it works fine, but it's too much pain to go through all the steps.  I use "scan to network folder" a LOT, so it is a problem.  The scan to network folder continues to operate correctly on the XP machine.

  To clarify what's happening - Scan kind of works network folder: he finds the file, scans the document and saves it in the folder.  But the size of the file is zero and it is unreadable.

  I called the Hp support by phone and was happy to have very positive support, and they don't charge me even though I was out of warranty.  The technician spent almost an hour of research on the issue, running either through every test possible and to discuss with her supervisor.  In the end, she said that there must be something wrong with my computer.  I think they just ran out of options.

  I am convinced that there is a compatibility issue with Windows 8.  If so, admit it and don't running me in circles more Computer Configuration controls do.

  A related problem: I downloaded the app "Hp Scan and Capture" of Windows 8 and it works at all.  Could not find even the officejet 8500, although this model is listed as a "supported device" so that the app on the Hp website.

  Unfortunately this printer is not on the list of printers supported for this application. Unfortunately, this printer has been made too long before programming has been written so that it can be retro-compatible.

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/Windows-8-app-HP-scan-and-capture/TD-p/1826665

  I hope that information is what you are looking for!